lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:	Tue, 20 May 2008 11:04:26 +0200
From:	Bas van Schaik <bas@...es.nl>
To:	linux-ext4@...r.kernel.org
Subject: Reoccurring ext3 errors: attempt to access beyond end of device,
 freeing blocks not in datazone

Dear all,

First of all, I'm very sorry to post such a vague question. I've been
working this it for months now, but the ext3 errors keep reoccurring
every once in a while. That is, every week or sometimes once a month.
The errors I get in such a situation:

> May 20 09:13:14 infinity kernel: attempt to access beyond end of device
> May 20 09:13:14 infinity kernel: loop0: rw=0, want=15629775440, limit=4404019200
> May 20 09:13:14 infinity kernel: attempt to access beyond end of device
> May 20 09:13:14 infinity kernel: loop0: rw=0, want=13075964688, limit=4404019200
> May 20 09:13:14 infinity kernel: attempt to access beyond end of device
> May 20 09:13:14 infinity kernel: loop0: rw=0, want=15354014352, limit=4404019200
> (...)
>   
and a little bit later:
> May 20 09:15:07 infinity kernel: EXT3-fs error (device loop0): ext3_free_blocks: Freeing blocks not in datazone - block = 1953721929, count = 1
> May 20 09:15:07 infinity kernel: Remounting filesystem read-only
> May 20 09:15:07 infinity kernel: EXT3-fs error (device loop0): ext3_free_blocks: Freeing blocks not in datazone - block = 1634495585, count = 1
> May 20 09:15:07 infinity kernel: EXT3-fs error (device loop0): ext3_free_blocks_sb: bit already cleared for block 543517044
> May 20 09:15:07 infinity kernel: EXT3-fs error (device loop0): ext3_free_blocks: Freeing blocks not in datazone - block = 1919251793, count = 1
> (...)
>   

After running e2fsck everything is fine again for a week or a little
longer...

The situation is not really trivial: I'm importing block devices from
several other machines using ATA over Ethernet (AoE). These block
devices are combined in a set of RAID5 arrays, each of them a physical
volume for LVM. Inside one large LVM volume group there exists a
cryptoloop encrypted logical volume, of which the 'plain' version is
accessible via /dev/loop0.

As you can see, there are a lot of possible failure points, I don't
expect you to identify those for me. I already performed thorough tests
on all servers (from memtest to I/O stressing to networking) and another
point is: this configuration did work flawlessly for about two years!

What I would like to know: what are the possible underlying causes for
the "attempt to access beyond en of device" error? Does anyone see any
meaning in the block (?) numbers mentioned in my syslog?

I would really like to hear from you, this problem is really causing me
headaches!

Regards,

  Bas

--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ