| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 16 Apr 2009 15:42:01 -0400
From: Chris Mason <chris.mason@...cle.com>
To: Jan Kara <jack@...e.cz>
Cc: Linus Torvalds <torvalds@...ux-foundation.org>,
"Theodore Ts'o" <tytso@....edu>,
Linux Kernel Developers List <linux-kernel@...r.kernel.org>,
Ext4 Developers List <linux-ext4@...r.kernel.org>
Subject: [PATCH] Add ext3 data=guarded mode
Hello everyone,
Here's an updated (v4) patch for ext3 data=guarded mode. The first two
patches in the series are unchanged, and it looks like Linus pulled them
in this morning.
This version fixes the bug Mike Galbraith hit. The problem was with
writes to the last block in the file that made the file bigger but
didn't actually add a new block. Since the block wasn't new, it
wouldn't get sent through the guarded code and the on disk i_size wasn't
always updated.
---
ext3 data=ordered mode makes sure that data blocks are on disk before
the metadata that references them, which avoids files full of garbage
or previously deleted data after a crash. It does this by adding every dirty
buffer onto a list of things that must be written before a commit.
This makes every fsync write out all the dirty data on the entire FS, which
has high latencies and is generally much more expensive than it needs to be.
Another way to avoid exposing stale data after a crash is to wait until
after the data buffers are written before updating the on-disk record
of the file's size. If we crash before the data IO is done, i_size
doesn't yet include the new blocks and no stale data is exposed.
This patch adds the delayed i_size update to ext3, along with a new
mount option (data=guarded) to enable it. The basic mechanism works like
this:
* Change block_write_full_page to take an end_io handler as a parameter.
This allows us to make an end_io handler that queues buffer heads for
a workqueue where the real work of updating the on disk i_size is done.
* Add an rbtree to the in-memory ext3 inode for tracking data=guarded
buffer heads that are waiting to be sent to disk.
* Add an ext3 guarded write_end call to add buffer heads for newly
allocated blocks into the rbtree. If we have a newly allocated block that is
filling a hole inside i_size, this is done as an old style data=ordered write
instead.
* Add an ext3 guarded writepage call that uses a special buffer head
end_io handler for buffers that are marked as guarded. Again, if we find
newly allocated blocks filling holes, they are sent through data=ordered
instead of data=guarded.
* When a guarded IO finishes, kick a per-FS workqueue to do the
on disk i_size updates. The workqueue function must be very careful. We
only update the on disk i_size if all of the IO between the old on
disk i_size and the new on disk i_size is complete. This is why an
rbtree is used to track the pending buffers, that way we can verify all
of the IO is actually done. The on disk i_size is incrementally updated to
the largest safe value every time an IO completes.
* When we start tracking guarded buffers on a given inode, we put the
inode into ext3's orphan list. This way if we do crash, the file will
be truncated back down to the on disk i_size and we'll free any blocks that
were not completely written. The inode is removed from the orphan list
only after all the guarded buffers are done.
Signed-off-by: Chris Mason <chris.mason@...cle.com>
---
fs/ext3/Makefile | 3 +-
fs/ext3/fsync.c | 12 +
fs/ext3/inode.c | 564 +++++++++++++++++++++++++++++++++++++++++++-
fs/ext3/namei.c | 3 +-
fs/ext3/ordered-data.c | 342 +++++++++++++++++++++++++++
fs/ext3/super.c | 48 ++++-
fs/jbd/transaction.c | 1 +
include/linux/ext3_fs.h | 33 +++-
include/linux/ext3_fs_i.h | 44 ++++
include/linux/ext3_fs_sb.h | 6 +
include/linux/ext3_jbd.h | 11 +
include/linux/jbd.h | 10 +
12 files changed, 1058 insertions(+), 19 deletions(-)
diff --git a/fs/ext3/Makefile b/fs/ext3/Makefile
index e77766a..f3a9dc1 100644
--- a/fs/ext3/Makefile
+++ b/fs/ext3/Makefile
@@ -5,7 +5,8 @@
obj-$(CONFIG_EXT3_FS) += ext3.o
ext3-y := balloc.o bitmap.o dir.o file.o fsync.o ialloc.o inode.o \
- ioctl.o namei.o super.o symlink.o hash.o resize.o ext3_jbd.o
+ ioctl.o namei.o super.o symlink.o hash.o resize.o ext3_jbd.o \
+ ordered-data.o
ext3-$(CONFIG_EXT3_FS_XATTR) += xattr.o xattr_user.o xattr_trusted.o
ext3-$(CONFIG_EXT3_FS_POSIX_ACL) += acl.o
diff --git a/fs/ext3/fsync.c b/fs/ext3/fsync.c
index d336341..a50abb4 100644
--- a/fs/ext3/fsync.c
+++ b/fs/ext3/fsync.c
@@ -59,6 +59,11 @@ int ext3_sync_file(struct file * file, struct dentry *dentry, int datasync)
* sync_inode() will write the inode if it is dirty. Then the caller's
* filemap_fdatawait() will wait on the pages.
*
+ * data=guarded:
+ * The caller's filemap_fdatawrite will start the IO, and we
+ * use filemap_fdatawait here to make sure all the disk i_size updates
+ * are done before we commit the inode.
+ *
* data=journal:
* filemap_fdatawrite won't do anything (the buffers are clean).
* ext3_force_commit will write the file data into the journal and
@@ -84,6 +89,13 @@ int ext3_sync_file(struct file * file, struct dentry *dentry, int datasync)
.sync_mode = WB_SYNC_ALL,
.nr_to_write = 0, /* sys_fsync did this */
};
+ /*
+ * the new disk i_size must be logged before we commit,
+ * so we wait here for pending writeback
+ */
+ if (ext3_should_guard_data(inode))
+ filemap_write_and_wait(inode->i_mapping);
+
ret = sync_inode(inode, &wbc);
}
out:
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index fcfa243..94964f7 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -38,6 +38,7 @@
#include <linux/bio.h>
#include <linux/fiemap.h>
#include <linux/namei.h>
+#include <linux/workqueue.h>
#include "xattr.h"
#include "acl.h"
@@ -179,6 +180,105 @@ static int ext3_journal_test_restart(handle_t *handle, struct inode *inode)
}
/*
+ * after a data=guarded IO is done, we need to update the
+ * disk i_size to reflect the data we've written. If there are
+ * no more ordered data extents left in the tree, we need to
+ * get rid of the orphan entry making sure the file's
+ * block pointers match the i_size after a crash
+ *
+ * When we aren't in data=guarded mode, this just does an ext3_orphan_del.
+ *
+ * It returns the result of ext3_orphan_del.
+ *
+ * handle may be null if we are just cleaning up the orphan list in
+ * memory.
+ *
+ * pass must_log == 1 when the inode must be logged in order to get
+ * an i_size update on disk
+ */
+static int ordered_orphan_del(handle_t *handle, struct inode *inode,
+ int must_log)
+{
+ int ret = 0;
+
+ /* fast out when data=guarded isn't on */
+ if (!ext3_should_guard_data(inode))
+ return ext3_orphan_del(handle, inode);
+
+ ext3_ordered_lock(inode);
+ if (inode->i_nlink &&
+ RB_EMPTY_ROOT(&EXT3_I(inode)->ordered_tree.tree)) {
+ ext3_ordered_unlock(inode);
+
+ /*
+ * if we aren't actually on the orphan list, the orphan
+ * del won't log our inode. Log it now to make sure
+ */
+ ext3_mark_inode_dirty(handle, inode);
+
+ ret = ext3_orphan_del(handle, inode);
+ if (ret || !handle)
+ goto err;
+
+ /*
+ * now we check again to see if we might have dropped
+ * the orphan just after someone added a new ordered extent
+ */
+ ext3_ordered_lock(inode);
+ if (!RB_EMPTY_ROOT(&EXT3_I(inode)->ordered_tree.tree) &&
+ list_empty(&EXT3_I(inode)->i_orphan)) {
+ ext3_ordered_unlock(inode);
+ ret = ext3_orphan_add(handle, inode);
+ if (ret)
+ goto err;
+ } else {
+ ext3_ordered_unlock(inode);
+ }
+ } else if (handle && must_log) {
+ ext3_ordered_unlock(inode);
+
+ /*
+ * we need to make sure any updates done by the data=guarded
+ * code end up in the inode on disk. Log the inode
+ * here
+ */
+ ext3_mark_inode_dirty(handle, inode);
+ } else {
+ ext3_ordered_unlock(inode);
+ }
+
+err:
+ return ret;
+}
+
+/*
+ * Wrapper around ordered_orphan_del that starts a transaction
+ */
+static void ordered_orphan_del_trans(struct inode *inode, int must_log)
+{
+ handle_t *handle;
+
+ handle = ext3_journal_start(inode, 3);
+
+ /*
+ * uhoh, should we flag the FS as readonly here? ext3_dirty_inode
+ * doesn't, which is what we're modeling ourselves after.
+ *
+ * We do need to make sure to get this inode off the ordered list
+ * when the transaction start fails though. ordered_orphan_del
+ * does the right thing.
+ */
+ if (IS_ERR(handle)) {
+ ordered_orphan_del(NULL, inode, 0);
+ return;
+ }
+
+ ordered_orphan_del(handle, inode, must_log);
+ ext3_journal_stop(handle);
+}
+
+
+/*
* Called at the last iput() if i_nlink is zero.
*/
void ext3_delete_inode (struct inode * inode)
@@ -204,6 +304,13 @@ void ext3_delete_inode (struct inode * inode)
if (IS_SYNC(inode))
handle->h_sync = 1;
inode->i_size = 0;
+
+ /*
+ * make sure we clean up any ordered extents that didn't get
+ * IO started on them because i_size shrunk down to zero.
+ */
+ ext3_truncate_ordered_extents(inode, 0);
+
if (inode->i_blocks)
ext3_truncate(inode);
/*
@@ -767,6 +874,24 @@ err_out:
}
/*
+ * This protects the disk i_size with the spinlock for the ordered
+ * extent tree. It returns 1 when the inode needs to be logged
+ * because the i_disksize has been updated.
+ */
+static int maybe_update_disk_isize(struct inode *inode, loff_t new_size)
+{
+ int ret = 0;
+
+ ext3_ordered_lock(inode);
+ if (EXT3_I(inode)->i_disksize < new_size) {
+ EXT3_I(inode)->i_disksize = new_size;
+ ret = 1;
+ }
+ ext3_ordered_unlock(inode);
+ return ret;
+}
+
+/*
* Allocation strategy is simple: if we have to allocate something, we will
* have to go the whole way to leaf. So let's do it before attaching anything
* to tree, set linkage between the newborn blocks, write them if sync is
@@ -815,6 +940,7 @@ int ext3_get_blocks_handle(handle_t *handle, struct inode *inode,
if (!partial) {
first_block = le32_to_cpu(chain[depth - 1].key);
clear_buffer_new(bh_result);
+ clear_buffer_datanew(bh_result);
count++;
/*map more blocks*/
while (count < maxblocks && count <= blocks_to_boundary) {
@@ -873,6 +999,7 @@ int ext3_get_blocks_handle(handle_t *handle, struct inode *inode,
if (err)
goto cleanup;
clear_buffer_new(bh_result);
+ clear_buffer_datanew(bh_result);
goto got_it;
}
}
@@ -915,14 +1042,19 @@ int ext3_get_blocks_handle(handle_t *handle, struct inode *inode,
* i_disksize growing is protected by truncate_mutex. Don't forget to
* protect it if you're about to implement concurrent
* ext3_get_block() -bzzz
+ *
+ * FIXME, I think this only needs to extend the disk i_size when
+ * we're filling holes that came from using ftruncate to increase
+ * i_size. Need to verify.
*/
- if (!err && extend_disksize && inode->i_size > ei->i_disksize)
- ei->i_disksize = inode->i_size;
+ if (!ext3_should_guard_data(inode) && !err && extend_disksize)
+ maybe_update_disk_isize(inode, inode->i_size);
mutex_unlock(&ei->truncate_mutex);
if (err)
goto cleanup;
set_buffer_new(bh_result);
+ set_buffer_datanew(bh_result);
got_it:
map_bh(bh_result, inode->i_sb, le32_to_cpu(chain[depth-1].key));
if (count > blocks_to_boundary)
@@ -1079,6 +1211,77 @@ struct buffer_head *ext3_bread(handle_t *handle, struct inode *inode,
return NULL;
}
+/*
+ * data=guarded updates are handled in a workqueue after the IO
+ * is done. This runs through the list of buffer heads that are pending
+ * processing.
+ */
+void ext3_run_guarded_work(struct work_struct *work)
+{
+ struct ext3_sb_info *sbi =
+ container_of(work, struct ext3_sb_info, guarded_work);
+ struct buffer_head *bh;
+ struct ext3_ordered_extent *ordered;
+ struct inode *inode;
+ struct page *page;
+ int must_log;
+
+ spin_lock_irq(&sbi->guarded_lock);
+ while (!list_empty(&sbi->guarded_buffers)) {
+ ordered = list_entry(sbi->guarded_buffers.next,
+ struct ext3_ordered_extent, list);
+
+ list_del(&ordered->list);
+
+ bh = ordered->end_io_bh;
+ ordered->end_io_bh = NULL;
+ must_log = 0;
+
+ /* we don't need a reference on the buffer head because
+ * it is locked until the end_io handler his called.
+ *
+ * This means the page can't go away, which means the
+ * inode can't go away
+ */
+ spin_unlock_irq(&sbi->guarded_lock);
+
+ page = bh->b_page;
+ inode = page->mapping->host;
+
+ ext3_ordered_lock(inode);
+ if (ordered->bh) {
+ /*
+ * someone might have decided this buffer didn't
+ * really need to be ordered and removed us from
+ * the rb tree. They set ordered->bh to null
+ * when that happens.
+ */
+ must_log = ext3_ordered_update_i_size(inode, ordered);
+ ext3_remove_ordered_extent(inode, ordered);
+ }
+ ext3_ordered_unlock(inode);
+
+ /*
+ * drop the reference taken when this ordered extent was
+ * put onto the guarded_buffers list
+ */
+ ext3_put_ordered_extent(ordered);
+
+ /*
+ * maybe log the inode and/or cleanup the orphan entry
+ */
+ ordered_orphan_del_trans(inode, must_log > 0);
+
+ /*
+ * finally, call the real bh end_io function to do
+ * all the hard work of maintaining page writeback.
+ */
+ end_buffer_async_write(bh, buffer_uptodate(bh));
+ spin_lock_irq(&sbi->guarded_lock);
+ }
+ spin_unlock_irq(&sbi->guarded_lock);
+}
+
static int walk_page_buffers( handle_t *handle,
struct buffer_head *head,
unsigned from,
@@ -1185,6 +1388,7 @@ retry:
ret = walk_page_buffers(handle, page_buffers(page),
from, to, NULL, do_journal_get_write_access);
}
+
write_begin_failed:
if (ret) {
/*
@@ -1212,7 +1416,13 @@ out:
int ext3_journal_dirty_data(handle_t *handle, struct buffer_head *bh)
{
- int err = journal_dirty_data(handle, bh);
+ int err;
+
+ /* don't take buffers from the data=guarded list */
+ if (buffer_dataguarded(bh))
+ return 0;
+
+ err = journal_dirty_data(handle, bh);
if (err)
ext3_journal_abort_handle(__func__, __func__,
bh, handle, err);
@@ -1231,6 +1441,89 @@ static int journal_dirty_data_fn(handle_t *handle, struct buffer_head *bh)
return 0;
}
+/*
+ * Walk the buffers in a page for data=guarded mode. Buffers that
+ * are not marked as datanew are ignored.
+ *
+ * New buffers outside i_size are sent to the data guarded code
+ *
+ * We must do the old data=ordered mode when filling holes in the
+ * file, since i_size doesn't protect these at all.
+ */
+static int journal_dirty_data_guarded_fn(handle_t *handle,
+ struct buffer_head *bh)
+{
+ u64 offset = page_offset(bh->b_page) + bh_offset(bh);
+ struct inode *inode = bh->b_page->mapping->host;
+ int ret = 0;
+
+ /*
+ * Write could have mapped the buffer but it didn't copy the data in
+ * yet. So avoid filing such buffer into a transaction.
+ */
+ if (!buffer_mapped(bh) || !buffer_uptodate(bh))
+ return 0;
+
+ if (test_clear_buffer_datanew(bh)) {
+ /*
+ * if we're filling a hole inside i_size, we need to
+ * fall back to the old style data=ordered
+ */
+ if (offset < inode->i_size) {
+ ret = ext3_journal_dirty_data(handle, bh);
+ goto out;
+ }
+ ret = ext3_add_ordered_extent(inode, offset, bh);
+
+ /* if we crash before the IO is done, i_size will be small
+ * but these blocks will still be allocated to the file.
+ *
+ * So, add an orphan entry for the file, which will truncate it
+ * down to the i_size it finds after the crash.
+ *
+ * The orphan is cleaned up when the IO is done. We
+ * don't add orphans while mount is running the orphan list,
+ * that seems to corrupt the list.
+ */
+ if (ret == 0 && buffer_dataguarded(bh) &&
+ list_empty(&EXT3_I(inode)->i_orphan) &&
+ !(EXT3_SB(inode->i_sb)->s_mount_state & EXT3_ORPHAN_FS)) {
+ ret = ext3_orphan_add(handle, inode);
+ }
+ }
+out:
+ return ret;
+}
+
+/*
+ * Walk the buffers in a page for data=guarded mode for writepage.
+ *
+ * We must do the old data=ordered mode when filling holes in the
+ * file, since i_size doesn't protect these at all.
+ *
+ * This is actually called after writepage is run and so we can't
+ * trust anything other than the buffer head (which we have pinned).
+ *
+ * Any datanew buffer at writepage time is filling a hole, so we don't need
+ * extra tests against the inode size.
+ */
+static int journal_dirty_data_guarded_writepage_fn(handle_t *handle,
+ struct buffer_head *bh)
+{
+ int ret = 0;
+
+ /*
+ * Write could have mapped the buffer but it didn't copy the data in
+ * yet. So avoid filing such buffer into a transaction.
+ */
+ if (!buffer_mapped(bh) || !buffer_uptodate(bh))
+ return 0;
+
+ if (test_clear_buffer_datanew(bh))
+ ret = ext3_journal_dirty_data(handle, bh);
+ return ret;
+}
+
/* For write_end() in data=journal mode */
static int write_end_fn(handle_t *handle, struct buffer_head *bh)
{
@@ -1251,10 +1544,8 @@ static void update_file_sizes(struct inode *inode, loff_t pos, unsigned copied)
/* What matters to us is i_disksize. We don't write i_size anywhere */
if (pos + copied > inode->i_size)
i_size_write(inode, pos + copied);
- if (pos + copied > EXT3_I(inode)->i_disksize) {
- EXT3_I(inode)->i_disksize = pos + copied;
+ if (maybe_update_disk_isize(inode, pos + copied))
mark_inode_dirty(inode);
- }
}
/*
@@ -1300,6 +1591,65 @@ static int ext3_ordered_write_end(struct file *file,
return ret ? ret : copied;
}
+static int ext3_guarded_write_end(struct file *file,
+ struct address_space *mapping,
+ loff_t pos, unsigned len, unsigned copied,
+ struct page *page, void *fsdata)
+{
+ handle_t *handle = ext3_journal_current_handle();
+ struct inode *inode = file->f_mapping->host;
+ unsigned from, to;
+ int ret = 0, ret2;
+
+ copied = block_write_end(file, mapping, pos, len, copied,
+ page, fsdata);
+
+ from = pos & (PAGE_CACHE_SIZE - 1);
+ to = from + copied;
+ ret = walk_page_buffers(handle, page_buffers(page),
+ from, to, NULL, journal_dirty_data_guarded_fn);
+
+ /*
+ * we only update the in-memory i_size. The disk i_size is done
+ * by the end io handlers
+ */
+ if (ret == 0 && pos + copied > inode->i_size) {
+ int must_log;
+
+ i_size_write(inode, pos + copied);
+
+ /* we've updated i_size, but we may have raced with a
+ * data=guarded end_io handler.
+ *
+ * All the guarded IO could have ended while i_size was still
+ * small, and if we're just adding bytes into an existing block
+ * in the file, we may not be adding a new guarded IO with this
+ * write. So, do a check on the disk i_size and make sure it
+ * is updated to the highest safe value.
+ */
+ ext3_ordered_lock(inode);
+ must_log = ext3_ordered_update_i_size(inode, NULL);
+ ext3_ordered_unlock(inode);
+ ordered_orphan_del_trans(inode, must_log > 0);
+ }
+
+ /*
+ * There may be allocated blocks outside of i_size because
+ * we failed to copy some data. Prepare for truncate.
+ */
+ if (pos + len > inode->i_size)
+ ext3_orphan_add(handle, inode);
+ ret2 = ext3_journal_stop(handle);
+ if (!ret)
+ ret = ret2;
+ unlock_page(page);
+ page_cache_release(page);
+
+ if (pos + len > inode->i_size)
+ vmtruncate(inode, inode->i_size);
+ return ret ? ret : copied;
+}
+
static int ext3_writeback_write_end(struct file *file,
struct address_space *mapping,
loff_t pos, unsigned len, unsigned copied,
@@ -1311,6 +1661,7 @@ static int ext3_writeback_write_end(struct file *file,
copied = block_write_end(file, mapping, pos, len, copied, page, fsdata);
update_file_sizes(inode, pos, copied);
+
/*
* There may be allocated blocks outside of i_size because
* we failed to copy some data. Prepare for truncate.
@@ -1574,6 +1925,144 @@ out_fail:
return ret;
}
+/*
+ * Completion handler for block_write_full_page(). This will
+ * kick off the data=guarded workqueue as the IO finishes.
+ */
+static void end_buffer_async_write_guarded(struct buffer_head *bh,
+ int uptodate)
+{
+ struct ext3_sb_info *sbi;
+ struct address_space *mapping;
+ struct ext3_ordered_extent *ordered;
+ unsigned long flags;
+
+ mapping = bh->b_page->mapping;
+ if (!mapping || !bh->b_private || !buffer_dataguarded(bh)) {
+noguard:
+ end_buffer_async_write(bh, uptodate);
+ return;
+ }
+
+ /*
+ * the guarded workqueue function checks the uptodate bit on the
+ * bh and uses that to tell the real end_io handler if things worked
+ * out or not.
+ */
+ if (uptodate)
+ set_buffer_uptodate(bh);
+ else
+ clear_buffer_uptodate(bh);
+
+ sbi = EXT3_SB(mapping->host->i_sb);
+
+ spin_lock_irqsave(&sbi->guarded_lock, flags);
+
+ /*
+ * remove any chance that a truncate raced in and cleared
+ * our dataguard flag, which also freed the ordered extent in
+ * our b_private.
+ */
+ if (!buffer_dataguarded(bh)) {
+ spin_unlock_irqrestore(&sbi->guarded_lock, flags);
+ goto noguard;
+ }
+ ordered = bh->b_private;
+ WARN_ON(ordered->end_io_bh);
+
+ /*
+ * use the special end_io_bh pointer to make sure that
+ * some form of end_io handler is run on this bh, even
+ * if the ordered_extent is removed from the rb tree before
+ * our workqueue ends up processing it.
+ */
+ ordered->end_io_bh = bh;
+ list_add_tail(&ordered->list, &sbi->guarded_buffers);
+ ext3_get_ordered_extent(ordered);
+ spin_unlock_irqrestore(&sbi->guarded_lock, flags);
+
+ queue_work(sbi->guarded_wq, &sbi->guarded_work);
+}
+
+static int ext3_guarded_writepage(struct page *page,
+ struct writeback_control *wbc)
+{
+ struct inode *inode = page->mapping->host;
+ struct buffer_head *page_bufs;
+ handle_t *handle = NULL;
+ int ret = 0;
+ int err;
+
+ J_ASSERT(PageLocked(page));
+
+ /*
+ * We give up here if we're reentered, because it might be for a
+ * different filesystem.
+ */
+ if (ext3_journal_current_handle())
+ goto out_fail;
+
+ if (!page_has_buffers(page)) {
+ create_empty_buffers(page, inode->i_sb->s_blocksize,
+ (1 << BH_Dirty)|(1 << BH_Uptodate));
+ page_bufs = page_buffers(page);
+ } else {
+ page_bufs = page_buffers(page);
+ if (!walk_page_buffers(NULL, page_bufs, 0, PAGE_CACHE_SIZE,
+ NULL, buffer_unmapped)) {
+ /* Provide NULL get_block() to catch bugs if buffers
+ * weren't really mapped */
+ return block_write_full_page_endio(page, NULL, wbc,
+ end_buffer_async_write_guarded);
+ }
+ }
+ handle = ext3_journal_start(inode, ext3_writepage_trans_blocks(inode));
+
+ if (IS_ERR(handle)) {
+ ret = PTR_ERR(handle);
+ goto out_fail;
+ }
+
+ walk_page_buffers(handle, page_bufs, 0,
+ PAGE_CACHE_SIZE, NULL, bget_one);
+
+ ret = block_write_full_page_endio(page, ext3_get_block, wbc,
+ end_buffer_async_write_guarded);
+
+ /*
+ * The page can become unlocked at any point now, and
+ * truncate can then come in and change things. So we
+ * can't touch *page from now on. But *page_bufs is
+ * safe due to elevated refcount.
+ */
+
+ /*
+ * And attach them to the current transaction. But only if
+ * block_write_full_page() succeeded. Otherwise they are unmapped,
+ * and generally junk.
+ */
+ if (ret == 0) {
+ err = walk_page_buffers(handle, page_bufs, 0, PAGE_CACHE_SIZE,
+ NULL, journal_dirty_data_guarded_writepage_fn);
+ if (!ret)
+ ret = err;
+ }
+ walk_page_buffers(handle, page_bufs, 0,
+ PAGE_CACHE_SIZE, NULL, bput_one);
+ err = ext3_journal_stop(handle);
+ if (!ret)
+ ret = err;
+
+ return ret;
+
+out_fail:
+ redirty_page_for_writepage(wbc, page);
+ unlock_page(page);
+ return ret;
+}
+
+
+
static int ext3_writeback_writepage(struct page *page,
struct writeback_control *wbc)
{
@@ -1768,8 +2257,10 @@ static ssize_t ext3_direct_IO(int rw, struct kiocb *iocb,
ret = PTR_ERR(handle);
goto out;
}
+
if (inode->i_nlink)
- ext3_orphan_del(handle, inode);
+ ordered_orphan_del(handle, inode, 0);
+
if (ret > 0) {
loff_t end = offset + ret;
if (end > inode->i_size) {
@@ -1842,6 +2333,21 @@ static const struct address_space_operations ext3_writeback_aops = {
.is_partially_uptodate = block_is_partially_uptodate,
};
+static const struct address_space_operations ext3_guarded_aops = {
+ .readpage = ext3_readpage,
+ .readpages = ext3_readpages,
+ .writepage = ext3_guarded_writepage,
+ .sync_page = block_sync_page,
+ .write_begin = ext3_write_begin,
+ .write_end = ext3_guarded_write_end,
+ .bmap = ext3_bmap,
+ .invalidatepage = ext3_invalidatepage,
+ .releasepage = ext3_releasepage,
+ .direct_IO = ext3_direct_IO,
+ .migratepage = buffer_migrate_page,
+ .is_partially_uptodate = block_is_partially_uptodate,
+};
+
static const struct address_space_operations ext3_journalled_aops = {
.readpage = ext3_readpage,
.readpages = ext3_readpages,
@@ -1860,6 +2366,8 @@ void ext3_set_aops(struct inode *inode)
{
if (ext3_should_order_data(inode))
inode->i_mapping->a_ops = &ext3_ordered_aops;
+ else if (ext3_should_guard_data(inode))
+ inode->i_mapping->a_ops = &ext3_guarded_aops;
else if (ext3_should_writeback_data(inode))
inode->i_mapping->a_ops = &ext3_writeback_aops;
else
@@ -2376,7 +2884,8 @@ void ext3_truncate(struct inode *inode)
if (!ext3_can_truncate(inode))
return;
- if (inode->i_size == 0 && ext3_should_writeback_data(inode))
+ if (inode->i_size == 0 && (ext3_should_writeback_data(inode) ||
+ ext3_should_guard_data(inode)))
ei->i_state |= EXT3_STATE_FLUSH_ON_CLOSE;
/*
@@ -3103,10 +3612,39 @@ int ext3_setattr(struct dentry *dentry, struct iattr *attr)
ext3_journal_stop(handle);
}
+ if (S_ISREG(inode->i_mode) && (attr->ia_valid & ATTR_SIZE)) {
+ /*
+ * we need to make sure any data=guarded pages
+ * are on disk before we force a new disk i_size
+ * down into the inode. The crucial range is
+ * anything between the disksize on disk now
+ * and the new size we're going to set.
+ *
+ * We're holding i_mutex here, so we know new
+ * ordered extents are not going to appear in the inode
+ *
+ * This must be done both for truncates that make the
+ * file bigger and smaller because truncate messes around
+ * with the orphan inode list in both cases.
+ */
+ if (ext3_should_guard_data(inode)) {
+ filemap_write_and_wait_range(inode->i_mapping,
+ EXT3_I(inode)->i_disksize,
+ (loff_t)-1);
+ /*
+ * we've written everything, make sure all
+ * the ordered extents are really gone.
+ *
+ * This prevents leaking of ordered extents
+ * and it also makes sure the ordered extent code
+ * doesn't mess with the orphan link
+ */
+ ext3_truncate_ordered_extents(inode, 0);
+ }
+ }
if (S_ISREG(inode->i_mode) &&
attr->ia_valid & ATTR_SIZE && attr->ia_size < inode->i_size) {
handle_t *handle;
-
handle = ext3_journal_start(inode, 3);
if (IS_ERR(handle)) {
error = PTR_ERR(handle);
@@ -3114,6 +3652,7 @@ int ext3_setattr(struct dentry *dentry, struct iattr *attr)
}
error = ext3_orphan_add(handle, inode);
+
EXT3_I(inode)->i_disksize = attr->ia_size;
rc = ext3_mark_inode_dirty(handle, inode);
if (!error)
@@ -3125,8 +3664,11 @@ int ext3_setattr(struct dentry *dentry, struct iattr *attr)
/* If inode_setattr's call to ext3_truncate failed to get a
* transaction handle at all, we need to clean up the in-core
- * orphan list manually. */
- if (inode->i_nlink)
+ * orphan list manually. Because we've finished off all the
+ * guarded IO above, this doesn't hurt anything for the guarded
+ * code
+ */
+ if (inode->i_nlink && (attr->ia_valid & ATTR_SIZE))
ext3_orphan_del(NULL, inode);
if (!rc && (ia_valid & ATTR_MODE))
diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c
index 6ff7b97..ac3991a 100644
--- a/fs/ext3/namei.c
+++ b/fs/ext3/namei.c
@@ -2410,7 +2410,8 @@ static int ext3_rename (struct inode * old_dir, struct dentry *old_dentry,
ext3_mark_inode_dirty(handle, new_inode);
if (!new_inode->i_nlink)
ext3_orphan_add(handle, new_inode);
- if (ext3_should_writeback_data(new_inode))
+ if (ext3_should_writeback_data(new_inode) ||
+ ext3_should_guard_data(new_inode))
flush_file = 1;
}
retval = 0;
diff --git a/fs/ext3/ordered-data.c b/fs/ext3/ordered-data.c
new file mode 100644
index 0000000..d3ebccb
--- /dev/null
+++ b/fs/ext3/ordered-data.c
@@ -0,0 +1,342 @@
+/*
+ * Copyright (C) 2009 Oracle. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License v2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 021110-1307, USA.
+ */
+
+#include <linux/gfp.h>
+#include <linux/slab.h>
+#include <linux/blkdev.h>
+#include <linux/writeback.h>
+#include <linux/pagevec.h>
+#include <linux/buffer_head.h>
+#include <linux/ext3_jbd.h>
+
+
+/*
+ * These routines actually implement data=guarded mode, but the
+ * idea is that it may replace data=ordered mode as it becomes stable.
+ */
+
+static u64 entry_end(struct ext3_ordered_extent *entry, unsigned blocksize)
+{
+ return entry->start + blocksize;
+}
+
+/*
+ * returns NULL if the insertion worked, or it returns the node it did find
+ * in the tree
+ */
+static struct rb_node *tree_insert(struct rb_root *root, u64 start,
+ unsigned blocksize, struct rb_node *node)
+{
+ struct rb_node **p = &root->rb_node;
+ struct rb_node *parent = NULL;
+ struct ext3_ordered_extent *entry;
+
+ while (*p) {
+ parent = *p;
+ entry = rb_entry(parent, struct ext3_ordered_extent, rb_node);
+
+ if (start < entry->start)
+ p = &(*p)->rb_left;
+ else if (start >= entry_end(entry, blocksize))
+ p = &(*p)->rb_right;
+ else
+ return parent;
+ }
+
+ rb_link_node(node, parent, p);
+ rb_insert_color(node, root);
+ return NULL;
+}
+
+/*
+ * find the ordered struct that has this offset
+ */
+static inline struct rb_node *tree_search(struct ext3_ordered_inode_tree *tree,
+ u64 start, unsigned blocksize)
+{
+ struct rb_node *n = tree->tree.rb_node;
+ struct ext3_ordered_extent *entry;
+
+ while (n) {
+ entry = rb_entry(n, struct ext3_ordered_extent, rb_node);
+
+ if (start < entry->start)
+ n = n->rb_left;
+ else if (start >= entry_end(entry, blocksize))
+ n = n->rb_right;
+ else
+ return n;
+ }
+ return NULL;
+}
+
+/* allocate and add a new ordered_extent into the per-inode tree.
+ * start is the logical offset in the file
+ *
+ * The tree is given a single reference on the ordered extent that was
+ * inserted, and it also takes a reference on the buffer head.
+ */
+int ext3_add_ordered_extent(struct inode *inode, u64 start,
+ struct buffer_head *bh)
+{
+ struct ext3_ordered_inode_tree *tree;
+ struct rb_node *node;
+ struct ext3_ordered_extent *entry;
+ int ret = 0;
+
+ lock_buffer(bh);
+
+ /* ordered extent already there, or in old style data=ordered */
+ if (bh->b_private) {
+ ret = 0;
+ goto out;
+ }
+
+ tree = &EXT3_I(inode)->ordered_tree;
+ entry = kzalloc(sizeof(*entry), GFP_NOFS);
+ if (!entry) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ spin_lock(&tree->lock);
+ entry->start = start;
+
+ get_bh(bh);
+ entry->bh = bh;
+ bh->b_private = entry;
+ set_buffer_dataguarded(bh);
+
+ /* one ref for the tree */
+ atomic_set(&entry->refs, 1);
+ INIT_LIST_HEAD(&entry->list);
+ node = tree_insert(&tree->tree, start,
+ inode->i_sb->s_blocksize, &entry->rb_node);
+ BUG_ON(node);
+
+ spin_unlock(&tree->lock);
+out:
+ unlock_buffer(bh);
+ return ret;
+}
+
+/*
+ * used to drop a reference on an ordered extent. This will free
+ * the extent if the last reference is dropped
+ */
+int ext3_put_ordered_extent(struct ext3_ordered_extent *entry)
+{
+ if (atomic_dec_and_test(&entry->refs)) {
+ WARN_ON(entry->bh);
+ WARN_ON(entry->end_io_bh);
+ kfree(entry);
+ }
+ return 0;
+}
+
+/*
+ * remove an ordered extent from the tree. This removes the
+ * reference held by the rbtree on 'entry' and the
+ * reference on the buffer head held by the entry.
+ */
+int ext3_remove_ordered_extent(struct inode *inode,
+ struct ext3_ordered_extent *entry)
+{
+ struct ext3_ordered_inode_tree *tree;
+ struct rb_node *node;
+
+ tree = &EXT3_I(inode)->ordered_tree;
+ node = &entry->rb_node;
+
+ /*
+ * the data=guarded end_io handler takes this guarded_lock
+ * before it puts a given buffer head and its ordered extent
+ * into the guarded_buffers list. We need to make sure
+ * we don't race with them, so we take the guarded_lock too.
+ */
+ spin_lock_irq(&EXT3_SB(inode->i_sb)->guarded_lock);
+ clear_buffer_dataguarded(entry->bh);
+ entry->bh->b_private = NULL;
+ brelse(entry->bh);
+ entry->bh = NULL;
+ spin_unlock_irq(&EXT3_SB(inode->i_sb)->guarded_lock);
+
+ /*
+ * we must not clear entry->end_io_bh, that is set by
+ * the end_io handlers and will be cleared by the end_io
+ * workqueue
+ */
+
+ rb_erase(node, &tree->tree);
+ RB_CLEAR_NODE(node);
+ ext3_put_ordered_extent(entry);
+ return 0;
+}
+
+/*
+ * After an extent is done, call this to conditionally update the on disk
+ * i_size. i_size is updated to cover any fully written part of the file.
+ *
+ * This returns < 0 on error, zero if no action needs to be taken and
+ * 1 if the inode must be logged.
+ */
+int ext3_ordered_update_i_size(struct inode *inode,
+ struct ext3_ordered_extent *entry)
+{
+ u64 new_i_size;
+ u64 i_size_test;
+ u64 disk_i_size;
+ struct rb_node *node;
+ struct ext3_ordered_extent *test;
+ unsigned blocksize = inode->i_sb->s_blocksize;
+ int ret = 0;
+
+ disk_i_size = EXT3_I(inode)->i_disksize;
+
+ /*
+ * if the disk i_size is already at the inode->i_size, or
+ * this ordered extent is inside the disk i_size, we're done
+ */
+ if (disk_i_size >= inode->i_size)
+ goto out;
+
+ /*
+ * if the caller didn't pass us an entry, check against
+ * the first entry in the rbtree
+ */
+ if (!entry) {
+ node = rb_first(&EXT3_I(inode)->ordered_tree.tree);
+ if (!node) {
+ /*
+ * nothing in the tree at all, we're fully up to
+ * date
+ */
+ i_size_test = i_size_read(inode);
+ goto out_update;
+ }
+ entry = rb_entry(node, struct ext3_ordered_extent, rb_node);
+ if (entry->start >= disk_i_size)
+ goto out;
+
+ /*
+ * the area between disk_i_size and the start of this
+ * entry is fully written. Update the on disk i_size
+ */
+ i_size_test = entry->start;
+ goto out_update;
+ }
+
+ /*
+ * walk backward from this ordered extent to disk_i_size.
+ * if we find an ordered extent then we can't update disk i_size
+ * yet
+ */
+ node = &entry->rb_node;
+ while (1) {
+ node = rb_prev(node);
+ if (!node)
+ break;
+ test = rb_entry(node, struct ext3_ordered_extent, rb_node);
+ if (entry_end(test, blocksize) <= disk_i_size)
+ break;
+ if (test->start >= inode->i_size)
+ break;
+ if (test->start >= disk_i_size)
+ goto out;
+ }
+
+ /*
+ * at this point, we know we can safely update i_size to at least
+ * the offset from this ordered extent. But, we need to
+ * walk forward and see if ios from higher up in the file have
+ * finished.
+ */
+ node = rb_next(&entry->rb_node);
+ if (node) {
+ /*
+ * do we have an area where IO might have finished
+ * between our ordered extent and the next one.
+ */
+ test = rb_entry(node, struct ext3_ordered_extent, rb_node);
+ i_size_test = test->start;
+ } else {
+ i_size_test = i_size_read(inode);
+ }
+
+out_update:
+ new_i_size = min_t(u64, i_size_test, i_size_read(inode));
+
+ /* the caller needs to log this inode */
+ ret = 1;
+
+ EXT3_I(inode)->i_disksize = new_i_size;
+out:
+ return ret;
+}
+
+/*
+ * during a truncate or delete, we need to get rid of pending
+ * ordered extents so there isn't a war over who updates disk i_size first.
+ * This does that, without waiting for any of the IO to actually finish.
+ *
+ * When the IO does finish, it will find the ordered extent removed from the
+ * tree and all will work properly.
+ */
+void ext3_truncate_ordered_extents(struct inode *inode, u64 offset)
+{
+ struct ext3_ordered_inode_tree *tree = &EXT3_I(inode)->ordered_tree;
+ struct rb_node *node;
+ struct ext3_ordered_extent *test;
+
+ spin_lock(&tree->lock);
+ node = rb_last(&tree->tree);
+ while (node) {
+ /* truncate is going to end up waiting for pages that
+ * straddle the new i_size. So, we can drop the
+ * ordered record for anything that starts before the new
+ * i_size.
+ */
+ test = rb_entry(node, struct ext3_ordered_extent, rb_node);
+ if (test->start < offset)
+ break;
+ node = rb_prev(&test->rb_node);
+
+ /*
+ * once this is called, the end_io handler won't run,
+ * and we won't update disk_i_size to include this buffer.
+ *
+ * That's ok for truncates because the truncate code is
+ * writing a new i_size.
+ *
+ * This ignores any IO in flight, which is ok
+ * because the guarded_buffers list has a reference
+ * on the ordered extent
+ */
+ ext3_remove_ordered_extent(inode, test);
+ }
+ spin_unlock(&tree->lock);
+ return;
+
+}
+
+void ext3_ordered_inode_init(struct ext3_inode_info *ei)
+{
+ ei->ordered_tree.tree.rb_node = NULL;
+ spin_lock_init(&ei->ordered_tree.lock);
+}
+
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 599dbfe..6a94647 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -37,6 +37,7 @@
#include <linux/quotaops.h>
#include <linux/seq_file.h>
#include <linux/log2.h>
+#include <linux/workqueue.h>
#include <asm/uaccess.h>
@@ -399,6 +400,9 @@ static void ext3_put_super (struct super_block * sb)
struct ext3_super_block *es = sbi->s_es;
int i, err;
+ flush_workqueue(sbi->guarded_wq);
+ destroy_workqueue(sbi->guarded_wq);
+
ext3_xattr_put_super(sb);
err = journal_destroy(sbi->s_journal);
sbi->s_journal = NULL;
@@ -468,6 +472,8 @@ static struct inode *ext3_alloc_inode(struct super_block *sb)
#endif
ei->i_block_alloc_info = NULL;
ei->vfs_inode.i_version = 1;
+ ext3_ordered_inode_init(ei);
+
return &ei->vfs_inode;
}
@@ -481,6 +487,8 @@ static void ext3_destroy_inode(struct inode *inode)
false);
dump_stack();
}
+ if (EXT3_I(inode)->ordered_tree.tree.rb_node)
+ printk(KERN_INFO "EXT3 ordered tree not empty\n");
kmem_cache_free(ext3_inode_cachep, EXT3_I(inode));
}
@@ -528,6 +536,13 @@ static void ext3_clear_inode(struct inode *inode)
EXT3_I(inode)->i_default_acl = EXT3_ACL_NOT_CACHED;
}
#endif
+ /*
+ * If pages got cleaned by truncate, truncate should have
+ * gotten rid of the ordered extents. Just in case, drop them
+ * here.
+ */
+ ext3_truncate_ordered_extents(inode, 0);
+
ext3_discard_reservation(inode);
EXT3_I(inode)->i_block_alloc_info = NULL;
if (unlikely(rsv))
@@ -634,6 +649,8 @@ static int ext3_show_options(struct seq_file *seq, struct vfsmount *vfs)
seq_puts(seq, ",data=journal");
else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA)
seq_puts(seq, ",data=ordered");
+ else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_GUARDED_DATA)
+ seq_puts(seq, ",data=guarded");
else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA)
seq_puts(seq, ",data=writeback");
@@ -790,7 +807,7 @@ enum {
Opt_reservation, Opt_noreservation, Opt_noload, Opt_nobh, Opt_bh,
Opt_commit, Opt_journal_update, Opt_journal_inum, Opt_journal_dev,
Opt_abort, Opt_data_journal, Opt_data_ordered, Opt_data_writeback,
- Opt_data_err_abort, Opt_data_err_ignore,
+ Opt_data_guarded, Opt_data_err_abort, Opt_data_err_ignore,
Opt_usrjquota, Opt_grpjquota, Opt_offusrjquota, Opt_offgrpjquota,
Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_quota, Opt_noquota,
Opt_ignore, Opt_barrier, Opt_err, Opt_resize, Opt_usrquota,
@@ -832,6 +849,7 @@ static const match_table_t tokens = {
{Opt_abort, "abort"},
{Opt_data_journal, "data=journal"},
{Opt_data_ordered, "data=ordered"},
+ {Opt_data_guarded, "data=guarded"},
{Opt_data_writeback, "data=writeback"},
{Opt_data_err_abort, "data_err=abort"},
{Opt_data_err_ignore, "data_err=ignore"},
@@ -1034,6 +1052,9 @@ static int parse_options (char *options, struct super_block *sb,
case Opt_data_ordered:
data_opt = EXT3_MOUNT_ORDERED_DATA;
goto datacheck;
+ case Opt_data_guarded:
+ data_opt = EXT3_MOUNT_GUARDED_DATA;
+ goto datacheck;
case Opt_data_writeback:
data_opt = EXT3_MOUNT_WRITEBACK_DATA;
datacheck:
@@ -1949,11 +1970,23 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
clear_opt(sbi->s_mount_opt, NOBH);
}
}
+
+ /*
+ * setup the guarded work list
+ */
+ INIT_LIST_HEAD(&EXT3_SB(sb)->guarded_buffers);
+ INIT_WORK(&EXT3_SB(sb)->guarded_work, ext3_run_guarded_work);
+ spin_lock_init(&EXT3_SB(sb)->guarded_lock);
+ EXT3_SB(sb)->guarded_wq = create_workqueue("ext3-guard");
+ if (!EXT3_SB(sb)->guarded_wq) {
+ printk(KERN_ERR "EXT3-fs: failed to create workqueue\n");
+ goto failed_mount_guard;
+ }
+
/*
* The journal_load will have done any necessary log recovery,
* so we can safely mount the rest of the filesystem now.
*/
-
root = ext3_iget(sb, EXT3_ROOT_INO);
if (IS_ERR(root)) {
printk(KERN_ERR "EXT3-fs: get root inode failed\n");
@@ -1965,6 +1998,7 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
printk(KERN_ERR "EXT3-fs: corrupt root inode, run e2fsck\n");
goto failed_mount4;
}
+
sb->s_root = d_alloc_root(root);
if (!sb->s_root) {
printk(KERN_ERR "EXT3-fs: get root dentry failed\n");
@@ -1974,6 +2008,7 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
}
ext3_setup_super (sb, es, sb->s_flags & MS_RDONLY);
+
/*
* akpm: core read_super() calls in here with the superblock locked.
* That deadlocks, because orphan cleanup needs to lock the superblock
@@ -1989,9 +2024,10 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
printk (KERN_INFO "EXT3-fs: recovery complete.\n");
ext3_mark_recovery_complete(sb, es);
printk (KERN_INFO "EXT3-fs: mounted filesystem with %s data mode.\n",
- test_opt(sb,DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA ? "journal":
- test_opt(sb,DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA ? "ordered":
- "writeback");
+ test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA ? "journal" :
+ test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_GUARDED_DATA ? "guarded" :
+ test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA ? "ordered" :
+ "writeback");
lock_kernel();
return 0;
@@ -2003,6 +2039,8 @@ cantfind_ext3:
goto failed_mount;
failed_mount4:
+ destroy_workqueue(EXT3_SB(sb)->guarded_wq);
+failed_mount_guard:
journal_destroy(sbi->s_journal);
failed_mount3:
percpu_counter_destroy(&sbi->s_freeblocks_counter);
diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c
index ed886e6..1354a55 100644
--- a/fs/jbd/transaction.c
+++ b/fs/jbd/transaction.c
@@ -2018,6 +2018,7 @@ zap_buffer_unlocked:
clear_buffer_mapped(bh);
clear_buffer_req(bh);
clear_buffer_new(bh);
+ clear_buffer_datanew(bh);
bh->b_bdev = NULL;
return may_free;
}
diff --git a/include/linux/ext3_fs.h b/include/linux/ext3_fs.h
index 634a5e5..09faa88 100644
--- a/include/linux/ext3_fs.h
+++ b/include/linux/ext3_fs.h
@@ -18,6 +18,7 @@
#include <linux/types.h>
#include <linux/magic.h>
+#include <linux/workqueue.h>
/*
* The second extended filesystem constants/structures
@@ -398,7 +399,6 @@ struct ext3_inode {
#define EXT3_MOUNT_MINIX_DF 0x00080 /* Mimics the Minix statfs */
#define EXT3_MOUNT_NOLOAD 0x00100 /* Don't use existing journal*/
#define EXT3_MOUNT_ABORT 0x00200 /* Fatal error detected */
-#define EXT3_MOUNT_DATA_FLAGS 0x00C00 /* Mode for data writes: */
#define EXT3_MOUNT_JOURNAL_DATA 0x00400 /* Write data to journal */
#define EXT3_MOUNT_ORDERED_DATA 0x00800 /* Flush data before commit */
#define EXT3_MOUNT_WRITEBACK_DATA 0x00C00 /* No data ordering */
@@ -414,6 +414,12 @@ struct ext3_inode {
#define EXT3_MOUNT_GRPQUOTA 0x200000 /* "old" group quota */
#define EXT3_MOUNT_DATA_ERR_ABORT 0x400000 /* Abort on file data write
* error in ordered mode */
+#define EXT3_MOUNT_GUARDED_DATA 0x800000 /* guard new writes with
+ i_size */
+#define EXT3_MOUNT_DATA_FLAGS (EXT3_MOUNT_JOURNAL_DATA | \
+ EXT3_MOUNT_ORDERED_DATA | \
+ EXT3_MOUNT_WRITEBACK_DATA | \
+ EXT3_MOUNT_GUARDED_DATA)
/* Compatibility, for having both ext2_fs.h and ext3_fs.h included at once */
#ifndef _LINUX_EXT2_FS_H
@@ -892,6 +898,7 @@ extern void ext3_get_inode_flags(struct ext3_inode_info *);
extern void ext3_set_aops(struct inode *inode);
extern int ext3_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
u64 start, u64 len);
+void ext3_run_guarded_work(struct work_struct *work);
/* ioctl.c */
extern long ext3_ioctl(struct file *, unsigned int, unsigned long);
@@ -945,7 +952,31 @@ extern const struct inode_operations ext3_special_inode_operations;
extern const struct inode_operations ext3_symlink_inode_operations;
extern const struct inode_operations ext3_fast_symlink_inode_operations;
+/* ordered-data.c */
+int ext3_add_ordered_extent(struct inode *inode, u64 file_offset,
+ struct buffer_head *bh);
+int ext3_put_ordered_extent(struct ext3_ordered_extent *entry);
+int ext3_remove_ordered_extent(struct inode *inode,
+ struct ext3_ordered_extent *entry);
+int ext3_ordered_update_i_size(struct inode *inode,
+ struct ext3_ordered_extent *entry);
+void ext3_ordered_inode_init(struct ext3_inode_info *ei);
+void ext3_truncate_ordered_extents(struct inode *inode, u64 offset);
+
+static inline void ext3_ordered_lock(struct inode *inode)
+{
+ spin_lock(&EXT3_I(inode)->ordered_tree.lock);
+}
+static inline void ext3_ordered_unlock(struct inode *inode)
+{
+ spin_unlock(&EXT3_I(inode)->ordered_tree.lock);
+}
+
+static inline void ext3_get_ordered_extent(struct ext3_ordered_extent *entry)
+{
+ atomic_inc(&entry->refs);
+}
#endif /* __KERNEL__ */
#endif /* _LINUX_EXT3_FS_H */
diff --git a/include/linux/ext3_fs_i.h b/include/linux/ext3_fs_i.h
index 7894dd0..399e3d8 100644
--- a/include/linux/ext3_fs_i.h
+++ b/include/linux/ext3_fs_i.h
@@ -20,6 +20,7 @@
#include <linux/rbtree.h>
#include <linux/seqlock.h>
#include <linux/mutex.h>
+#include <linux/rbtree.h>
/* data type for block offset of block group */
typedef int ext3_grpblk_t;
@@ -65,6 +66,47 @@ struct ext3_block_alloc_info {
#define rsv_end rsv_window._rsv_end
/*
+ * used to prevent garbage in files after a crash by
+ * making sure i_size isn't updated until after the IO
+ * is done.
+ *
+ * See fs/ext3/ordered-data.c for the code that uses these.
+ */
+struct buffer_head;
+struct ext3_ordered_inode_tree {
+ /* protects the tree and disk i_size */
+ spinlock_t lock;
+
+ /* rb tree of IO that needs to happen before i_size can be updated */
+ struct rb_root tree;
+};
+
+struct ext3_ordered_extent {
+ /* logical offset of the block in the file */
+ u64 start;
+
+ /* buffer head being written */
+ struct buffer_head *bh;
+
+ /*
+ * set at end_io time so we properly
+ * do IO accounting even when this ordered
+ * extent struct has been removed from the
+ * rbtree
+ */
+ struct buffer_head *end_io_bh;
+
+ /* number of refs on this ordered extent */
+ atomic_t refs;
+
+ /* for the rb tree */
+ struct rb_node rb_node;
+
+ /* list of things being processed by the workqueue */
+ struct list_head list;
+};
+
+/*
* third extended file system inode data in memory
*/
struct ext3_inode_info {
@@ -141,6 +183,8 @@ struct ext3_inode_info {
* by other means, so we have truncate_mutex.
*/
struct mutex truncate_mutex;
+
+ struct ext3_ordered_inode_tree ordered_tree;
struct inode vfs_inode;
};
diff --git a/include/linux/ext3_fs_sb.h b/include/linux/ext3_fs_sb.h
index f07f34d..5dbdbeb 100644
--- a/include/linux/ext3_fs_sb.h
+++ b/include/linux/ext3_fs_sb.h
@@ -21,6 +21,7 @@
#include <linux/wait.h>
#include <linux/blockgroup_lock.h>
#include <linux/percpu_counter.h>
+#include <linux/workqueue.h>
#endif
#include <linux/rbtree.h>
@@ -82,6 +83,11 @@ struct ext3_sb_info {
char *s_qf_names[MAXQUOTAS]; /* Names of quota files with journalled quota */
int s_jquota_fmt; /* Format of quota to use */
#endif
+
+ struct workqueue_struct *guarded_wq;
+ struct work_struct guarded_work;
+ struct list_head guarded_buffers;
+ spinlock_t guarded_lock;
};
static inline spinlock_t *
diff --git a/include/linux/ext3_jbd.h b/include/linux/ext3_jbd.h
index cf82d51..45cb4aa 100644
--- a/include/linux/ext3_jbd.h
+++ b/include/linux/ext3_jbd.h
@@ -212,6 +212,17 @@ static inline int ext3_should_order_data(struct inode *inode)
return 0;
}
+static inline int ext3_should_guard_data(struct inode *inode)
+{
+ if (!S_ISREG(inode->i_mode))
+ return 0;
+ if (EXT3_I(inode)->i_flags & EXT3_JOURNAL_DATA_FL)
+ return 0;
+ if (test_opt(inode->i_sb, GUARDED_DATA) == EXT3_MOUNT_GUARDED_DATA)
+ return 1;
+ return 0;
+}
+
static inline int ext3_should_writeback_data(struct inode *inode)
{
if (!S_ISREG(inode->i_mode))
diff --git a/include/linux/jbd.h b/include/linux/jbd.h
index 53ae439..6b38b50 100644
--- a/include/linux/jbd.h
+++ b/include/linux/jbd.h
@@ -291,6 +291,13 @@ enum jbd_state_bits {
BH_State, /* Pins most journal_head state */
BH_JournalHead, /* Pins bh->b_private and jh->b_bh */
BH_Unshadow, /* Dummy bit, for BJ_Shadow wakeup filtering */
+ BH_DataGuarded, /* ext3 data=guarded mode buffer
+ * these have something other than a
+ * journal_head at b_private */
+ BH_DataNew, /* BH_new gets cleared too early for
+ * data=guarded to use it. So,
+ * this gets set instead.
+ */
};
BUFFER_FNS(JBD, jbd)
@@ -302,6 +309,9 @@ TAS_BUFFER_FNS(Revoked, revoked)
BUFFER_FNS(RevokeValid, revokevalid)
TAS_BUFFER_FNS(RevokeValid, revokevalid)
BUFFER_FNS(Freed, freed)
+BUFFER_FNS(DataGuarded, dataguarded)
+BUFFER_FNS(DataNew, datanew)
+TAS_BUFFER_FNS(DataNew, datanew)
static inline struct buffer_head *jh2bh(struct journal_head *jh)
{
--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists