lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Fri, 14 Jan 2011 09:00:22 +0800
From:	Shaohua Li <shli@...nel.org>
To:	djwong@...ibm.com
Cc:	Jens Axboe <axboe@...nel.dk>, "Theodore Ts'o" <tytso@....edu>,
	Neil Brown <neilb@...e.de>,
	Andreas Dilger <adilger.kernel@...ger.ca>,
	Jan Kara <jack@...e.cz>, Mike Snitzer <snitzer@...hat.com>,
	linux-kernel <linux-kernel@...r.kernel.org>,
	Keith Mannthey <kmannth@...ibm.com>,
	Mingming Cao <cmm@...ibm.com>, Tejun Heo <tj@...nel.org>,
	linux-ext4@...r.kernel.org, Ric Wheeler <rwheeler@...hat.com>,
	Christoph Hellwig <hch@....de>, Josef Bacik <josef@...hat.com>
Subject: Re: [PATCH v7.1] block: Coordinate flush requests

2011/1/13 Darrick J. Wong <djwong@...ibm.com>:
> On Thu, Jan 13, 2011 at 01:38:55PM +0800, Shaohua Li wrote:
>> 2011/1/13 Darrick J. Wong <djwong@...ibm.com>:
>> > On certain types of storage hardware, flushing the write cache takes a
>> > considerable amount of time.  Typically, these are simple storage systems with
>> > write cache enabled and no battery to save that cache during a power failure.
>> > When we encounter a system with many I/O threads that try to flush the cache,
>> > performance is suboptimal because each of those threads issues its own flush
>> > command to the drive instead of trying to coordinate the flushes, thereby
>> > wasting execution time.
>> >
>> > Instead of each thread initiating its own flush, we now try to detect the
>> > situation where multiple threads are issuing flush requests.  The first thread
>> > to enter blkdev_issue_flush becomes the owner of the flush, and all threads
>> > that enter blkdev_issue_flush before the flush finishes are queued up to wait
>> > for the next flush.  When that first flush finishes, one of those sleeping
>> > threads is woken up to perform the next flush and then wake up the other
>> > threads which are asleep waiting for the second flush to finish.
>> >
>> > In the single-threaded case, the thread will simply issue the flush and exit.
>> >
>> > To test the performance of this latest patch, I created a spreadsheet
>> > reflecting the performance numbers I obtained with the same ffsb fsync-happy
>> > workload that I've been running all along:  http://tinyurl.com/6xqk5bs
>> >
>> > The second tab of the workbook provides easy comparisons of the performance
>> > before and after adding flush coordination to the block layer.  Variations in
>> > the runs were never more than about 5%, so the slight performance increases and
>> > decreases are negligible.  It is expected that devices with low flush times
>> > should not show much change, whether the low flush times are due to the lack of
>> > write cache or the controller having a battery and thereby ignoring the flush
>> > command.
>> >
>> > Notice that the elm3b231_ipr, elm3b231_bigfc, elm3b57, elm3c44_ssd,
>> > elm3c44_sata_wc, and elm3c71_scsi profiles showed large performance increases
>> > from flush coordination.  These 6 configurations all feature large write caches
>> > without battery backups, and fairly high (or at least non-zero) average flush
>> > times, as was discovered when I studied the v6 patch.
>> >
>> > Unfortunately, there is one very odd regression: elm3c44_sas.  This profile is
>> > a couple of battery-backed RAID cabinets striped together with raid0 on md.  I
>> > suspect that there is some sort of problematic interaction with md, because
>> > running ffsb on the individual hardware arrays produces numbers similar to
>> > elm3c71_extsas.  elm3c71_extsas uses the same type of hardware array as does
>> > elm3c44_sas, in fact.
>> >
>> > FYI, the flush coordination patch shows performance improvements both with and
>> > without Christoph's patch that issues pure flushes directly.  The spreadsheet
>> > only captures the performance numbers collected without Christoph's patch.
>> Hi,
>> can you explain why there is improvement with your patch? If there are
>> multiple flush, blk_do_flush already has queue for them (the
>> ->pending_flushes list).
>
> With the current code, if we have n threads trying to issue flushes, the block
> layer will issue n flushes one after the other.  I think the point of
> Christoph's pure-flush patch is to skip the serialization step and allow
> issuing of the n pure flushes in parallel.  The point of this patch is optimize
> even more aggressively, such that as soon as the system becomes free to process
> a pure flush (at time t), all the requests for a pure flush that were created
> since the last time a pure flush was actually issued can be covered with a
> single flush issued at time t.  In other words, this patch tries to reduce the
> number of pure flushes issued.
Thanks, but why just doing merge for pure flush? we can merge normal
flush requests
with a pure flush request too.

+               complete_all(&new_flush->ready);
+               spin_unlock(&disk->flush_flag_lock);

-       bio_put(bio);
+               complete_all(&flush->finish);
this seems can't guarantee the second waiter runs after the first
waiter, am I missing anything?

it appears we can easily implement this in blk_do_flush, I had
something at my hand too, passed test but no data yet.

View attachment "blk-flush.patch" of type "text/x-patch" (2868 bytes)

Powered by blists - more mailing lists