| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 31 Jul 2013 22:10:36 +0200
From: Jan Kara <jack@...e.cz>
To: Eric Sandeen <sandeen@...hat.com>
Cc: ext4 development <linux-ext4@...r.kernel.org>,
Jan Kara <jack@...e.cz>, Leonardo Menezes Vaz <lvaz@...hat.com>
Subject: Re: [PATCH V2] ext3: allow specifying external journal by pathname
mount option
On Wed 31-07-13 14:33:00, Eric Sandeen wrote:
> It's always been a hassle that if an external journal's
> device number changes, the filesystem won't mount.
> And since boot-time enumeration can change, device number
> changes aren't unusual.
>
> The current mechanism to update the journal location is by
> passing in a mount option w/ a new devnum, but that's a hassle;
> it's a manual approach, fixing things after the fact.
>
> Adding a mount option, "-o journal_path=/dev/$DEVICE" would
> help, since then we can do i.e.
>
> # mount -o journal_path=/dev/disk/by-label/$JOURNAL_LABEL ...
>
> and it'll mount even if the devnum has changed, as shown here:
>
> # losetup /dev/loop0 journalfile
> # mke2fs -L mylabel-journal -O journal_dev /dev/loop0
> # mkfs.ext3 -L mylabel -J device=/dev/loop0 /dev/sdb1
>
> Change the journal device number:
>
> # losetup -d /dev/loop0
> # losetup /dev/loop1 journalfile
>
> And today it will fail:
>
> # mount /dev/sdb1 /mnt/test
> mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
> missing codepage or helper program, or other error
> In some cases useful info is found in syslog - try
> dmesg | tail or so
>
> # dmesg | tail -n 1
> [17343.240702] EXT3-fs (sdb1): error: couldn't read superblock of external journal
>
> But with this new mount option, we can specify the new path:
>
> # mount -o journal_path=/dev/loop1 /dev/sdb1 /mnt/test
> #
>
> (which does update the encoded device number, incidentally):
>
> # umount /dev/sdb1
> # dumpe2fs -h /dev/sdb1 | grep "Journal device"
> dumpe2fs 1.41.12 (17-May-2010)
> Journal device: 0x0701
>
> But best of all we can just always mount by journal-path, and
> it'll always work:
>
> # mount -o journal_path=/dev/disk/by-label/mylabel-journal /dev/sdb1 /mnt/test
> #
>
> So the journal_path option can be specified in fstab, and as long as
> the disk is available somewhere, and findable by label (or by UUID),
> we can mount.
>
> Signed-off-by: Eric Sandeen <sandeen@...hat.com>
Thanks! I've merged the patch to my tree.
Honza
> ---
>
> V2: get device out of bdev's inode, rather than grabbing bdev & releasing it
>
> diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt
> index 293855e..7ed0d17 100644
> --- a/Documentation/filesystems/ext3.txt
> +++ b/Documentation/filesystems/ext3.txt
> @@ -26,11 +26,12 @@ journal=inum When a journal already exists, this option is ignored.
> Otherwise, it specifies the number of the inode which
> will represent the ext3 file system's journal file.
>
> +journal_path=path
> journal_dev=devnum When the external journal device's major/minor numbers
> - have changed, this option allows the user to specify
> + have changed, these options allow the user to specify
> the new journal location. The journal device is
> - identified through its new major/minor numbers encoded
> - in devnum.
> + identified through either its new major/minor numbers
> + encoded in devnum, or via a path to the device.
>
> norecovery Don't load the journal on mounting. Note that this forces
> noload mount of inconsistent filesystem, which can lead to
> diff --git a/fs/ext3/super.c b/fs/ext3/super.c
> index c47f147..c50c761 100644
> --- a/fs/ext3/super.c
> +++ b/fs/ext3/super.c
> @@ -27,6 +27,7 @@
> #include <linux/seq_file.h>
> #include <linux/log2.h>
> #include <linux/cleancache.h>
> +#include <linux/namei.h>
>
> #include <asm/uaccess.h>
>
> @@ -819,6 +820,7 @@ enum {
> Opt_user_xattr, Opt_nouser_xattr, Opt_acl, Opt_noacl,
> Opt_reservation, Opt_noreservation, Opt_noload, Opt_nobh, Opt_bh,
> Opt_commit, Opt_journal_update, Opt_journal_inum, Opt_journal_dev,
> + Opt_journal_path,
> Opt_abort, Opt_data_journal, Opt_data_ordered, Opt_data_writeback,
> Opt_data_err_abort, Opt_data_err_ignore,
> Opt_usrjquota, Opt_grpjquota, Opt_offusrjquota, Opt_offgrpjquota,
> @@ -860,6 +862,7 @@ static const match_table_t tokens = {
> {Opt_journal_update, "journal=update"},
> {Opt_journal_inum, "journal=%u"},
> {Opt_journal_dev, "journal_dev=%u"},
> + {Opt_journal_path, "journal_path=%s"},
> {Opt_abort, "abort"},
> {Opt_data_journal, "data=journal"},
> {Opt_data_ordered, "data=ordered"},
> @@ -975,6 +978,11 @@ static int parse_options (char *options, struct super_block *sb,
> int option;
> kuid_t uid;
> kgid_t gid;
> + char *journal_path;
> + struct inode *journal_inode;
> + struct path path;
> + int error;
> +
> #ifdef CONFIG_QUOTA
> int qfmt;
> #endif
> @@ -1129,6 +1137,41 @@ static int parse_options (char *options, struct super_block *sb,
> return 0;
> *journal_devnum = option;
> break;
> + case Opt_journal_path:
> + if (is_remount) {
> + ext3_msg(sb, KERN_ERR, "error: cannot specify "
> + "journal on remount");
> + return 0;
> + }
> +
> + journal_path = match_strdup(&args[0]);
> + if (!journal_path) {
> + ext3_msg(sb, KERN_ERR, "error: could not dup "
> + "journal device string");
> + return 0;
> + }
> +
> + error = kern_path(journal_path, LOOKUP_FOLLOW, &path);
> + if (error) {
> + ext3_msg(sb, KERN_ERR, "error: could not find "
> + "journal device path: error %d", error);
> + kfree(journal_path);
> + return 0;
> + }
> +
> + journal_inode = path.dentry->d_inode;
> + if (!S_ISBLK(journal_inode->i_mode)) {
> + ext3_msg(sb, KERN_ERR, "error: journal path %s "
> + "is not a block device", journal_path);
> + path_put(&path);
> + kfree(journal_path);
> + return 0;
> + }
> +
> + *journal_devnum = new_encode_dev(journal_inode->i_rdev);
> + path_put(&path);
> + kfree(journal_path);
> + break;
> case Opt_noload:
> set_opt (sbi->s_mount_opt, NOLOAD);
> break;
>
>
--
Jan Kara <jack@...e.cz>
SUSE Labs, CR
--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists