| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 26 Sep 2013 13:45:34 -0400 From: InvTraySts <invtrasys@...il.com> To: Jan Kara <jack@...e.cz> Cc: Eric Sandeen <sandeen@...hat.com>, linux-ext4@...r.kernel.org, linux-fsdevel@...r.kernel.org Subject: Re: Fwd: Need help with Data Recovery on Ext4 partitions that became corrupted on running OS root@...ver:~# debugfs /dev/sdf1 debugfs 1.42.5 (29-Jul-2012) debugfs: stat / stat: A block group is missing an inode table while reading inode 2 debugfs: dump /etc/ dump: Usage: dump_inode [-p] <file> <output_file> debugfs: dump /etc/passwd /root/passwd.recovery /etc/passwd: A block group is missing an inode table debugfs: ls /etc/ /etc/: A block group is missing an inode table So now I am getting a different error message, even though literally nothing has changed other than the time I ran the command. I figured the passwd file would be the easiest thing to recover, since I don't remember the exact paths for other application configurations without doing some digging for the paths and such. At one point, before the mailing list and me joining the #ext channel, I was able to see that there was a lost and found folder, I just couldn't navigate it. So, I am not sure why that has changed either. I assume logical corruption to the extent it has could cause almost anything. On Thu, Sep 26, 2013 at 4:53 AM, Jan Kara <jack@...e.cz> wrote: > On Wed 25-09-13 20:08:38, InvTraySts wrote: >> (Going to merge these two back, because both of you are actually >> helping me, but with the two conversations being segregated like this >> it makes it hard to correlate with you both) >> The partprobe did work with getting the partition table reread. >> After that, the tune2fs sorta worked. >> root@...ver:~# tune2fs -f -O ^has_journal /dev/sdf1 >> tune2fs 1.42.5 (29-Jul-2012) >> root@...ver:~# mount /dev/sdf1 /media/tmp >> root@...ver:~# ls -l /media/tmp/ >> total 0 >> >> When I try and use the debugfs /dev/sdf1 >> >> root@...ver:~# debugfs /dev/sdf1 >> debugfs 1.42.5 (29-Jul-2012) >> debugfs: ls >> EXT2 directory corrupted >> debugfs: ls / >> /: EXT2 directory corrupted >> >> The drive is supposed to be ext4. > 'EXT2' in the message doesn't mean anything. It is always there. But we > see that even root directory is corrupted. That's bad. You can try what > 'stat /' says in debugfs? Possibly also run 'dump / <somefile>' to dump raw > directory data to <somefile> and attach the file here. But also given the > output of e2fsck I'm afraid there won't be much to save on the drive... > > Honza > >> root@...ver:~# dumpe2fs /dev/sdf1 >> dumpe2fs 1.42.5 (29-Jul-2012) >> Filesystem volume name: root >> Last mounted on: /media/ubuntu/root >> Filesystem UUID: removed >> Filesystem magic number: 0xEF53 >> Filesystem revision #: 1 (dynamic) >> Filesystem features: ext_attr resize_inode dir_index filetype >> extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink >> extra_isize >> Filesystem flags: signed_directory_hash >> Default mount options: user_xattr acl >> Filesystem state: not clean with errors >> Errors behavior: Continue >> Filesystem OS type: Linux >> Inode count: 4849664 >> Block count: 19398144 >> Reserved block count: 969907 >> Free blocks: 17066988 >> Free inodes: 4592929 >> First block: 0 >> Block size: 4096 >> Fragment size: 4096 >> Reserved GDT blocks: 1019 >> Blocks per group: 32768 >> Fragments per group: 32768 >> Inodes per group: 8192 >> Inode blocks per group: 512 >> Flex block group size: 16 >> Filesystem created: Sat May 25 14:59:50 2013 >> Last mount time: Wed Sep 25 19:59:07 2013 >> Last write time: Wed Sep 25 19:59:51 2013 >> Mount count: 1 >> Maximum mount count: -1 >> Last checked: Sat Aug 24 16:56:09 2013 >> Check interval: 0 (<none>) >> Lifetime writes: 107 GB >> Reserved blocks uid: 0 (user root) >> Reserved blocks gid: 0 (group root) >> First inode: 11 >> Inode size: 256 >> Required extra isize: 28 >> Desired extra isize: 28 >> Default directory hash: half_md4 >> Directory Hash Seed: 01a8f605-b2bc-41ee-b7b5-11d843ab622f >> Journal backup: inode blocks >> FS Error count: 9 >> First error time: Sat Aug 24 13:44:55 2013 >> First error function: ext4_iget >> First error line #: 3889 >> First error inode #: 8 >> First error block #: 0 >> Last error time: Wed Sep 25 19:59:12 2013 >> Last error function: htree_dirblock_to_tree >> Last error line #: 892 >> Last error inode #: 2 >> Last error block #: 20037 >> >> [...] >> [output scrolls very fast, and is very large] >> Group 10: (Blocks 327680-360447) [ITABLE_ZEROED] >> Checksum 0xecaa, unused inodes 0 >> Block bitmap at 1035 (bg #0 + 1035), Inode bitmap at 1051 (bg #0 + 1051) >> Inode table at 6177-6688 (bg #0 + 6177) >> 0 free blocks, 16 free inodes, 0 directories >> Free blocks: 327680, 327683-327685, 327687, 327689-327690, >> 327692-327693, 327695-327697, 327700-327701, 327703, 327705, >> 327707-327709, 327711-327715, 327718-327727, 327730-327808, >> 327810-327823, 327825-327842, 327846-327855, 327857-327875, 327878, >> 327881 >> >> (the total amount of pages that the dumpe2fs comes out with is about >> 240 pages. something that can't be pasted. If attachments would be >> required, I can attach a file with it). >> >> On Wed, Sep 25, 2013 at 5:28 PM, Jan Kara <jack@...e.cz> wrote: >> > On Wed 25-09-13 15:24:34, InvTraySts wrote: >> >> And am cloning the drive without the sync parameter this time. >> >> root@...ver:~# dd if=/dev/sda of=/dev/sdf bs=4096 conv=notrunc,noerror >> >> After it finished, I attempted to run dumpe2fs and it still responds with: >> >> root@...ver:~# dumpe2fs /dev/sdf1 >> >> dumpe2fs 1.42.5 (29-Jul-2012) >> >> dumpe2fs: Bad magic number in super-block while trying to open /dev/sdf1 >> >> Couldn't find valid filesystem superblock. >> > Well, that's likely because the partition table on /dev/sdf didn't get >> > reread. You can run 'partprobe /dev/sdf' to tell the kernel about the new >> > partition table. >> > >> > Honza >> > >> >> So I went ahead and tried to run the tune2fs command: >> >> root@...ver:~# tune2fs -f -O ^has_journal /dev/sda1 >> >> tune2fs 1.42.5 (29-Jul-2012) >> >> tune2fs: Bad magic number in super-block while trying to open /dev/sda1 >> >> Couldn't find valid filesystem superblock. >> >> >> >> Which also fails, yet dumpe2fs on /dev/sda1 works fine. >> >> >> >> >> >> On Wed, Sep 25, 2013 at 12:12 PM, Jan Kara <jack@...e.cz> wrote: >> >> > On Tue 24-09-13 22:25:49, InvTraySts wrote: >> >> >> So long story short, I had a server running that had a processor fail >> >> >> while powered on, causing the file systems to become corrupt. I >> >> >> replaced the motherboard, processor and power supply just to be on the >> >> >> safe side. However, I am at a bit of a loss as to what to do now. I >> >> >> was working sandeen in the OFTC IRC channel, but, on his >> >> >> recommendation he suggested me to post something to the mailing list. >> >> >> >> >> >> Lets start off with one drive at a time (I have 4 that are corrupt). >> >> >> The specific logical drive in question was in RAID1 on a Dell PERC 5/i >> >> >> card. >> >> >> If I try to mount this using: >> >> >> mount -t ext4 /dev/sda1 /media/tmp >> >> >> >> >> >> It complains in dmesg with the following output: >> >> >> 685621.845207] EXT4-fs error (device sda1): ext4_iget:3888: inode #8: >> >> >> comm mount: bad extra_isize (18013 != 256) >> >> >> [685621.845213] EXT4-fs (sda1): no journal found >> >> >> >> >> >> >> >> >> However, if I run dumpe2fs -f /dev/sda1 I get the following output: >> >> >> root@...ver:~# dumpe2fs -f /dev/sda1 >> >> >> dumpe2fs 1.42.5 (29-Jul-2012) >> >> >> Filesystem volume name: root >> >> >> Last mounted on: /media/ubuntu/root >> >> >> Filesystem UUID: f959e195-[removed] >> >> >> Filesystem magic number: 0xEF53 >> >> >> Filesystem revision #: 1 (dynamic) >> >> >> Filesystem features: has_journal ext_attr resize_inode dir_index >> >> >> filetype extent flex_bg sparse_super large_file huge_file uninit_bg >> >> >> dir_nlink extra_isize >> >> >> Filesystem flags: signed_directory_hash >> >> >> Default mount options: user_xattr acl >> >> >> Filesystem state: not clean with errors >> >> >> Errors behavior: Continue >> >> >> Filesystem OS type: Linux >> >> >> Inode count: 4849664 >> >> >> Block count: 19398144 >> >> >> Reserved block count: 969907 >> >> >> Free blocks: 17034219 >> >> >> Free inodes: 4592929 >> >> >> First block: 0 >> >> >> Block size: 4096 >> >> >> Fragment size: 4096 >> >> >> Reserved GDT blocks: 1019 >> >> >> Blocks per group: 32768 >> >> >> Fragments per group: 32768 >> >> >> Inodes per group: 8192 >> >> >> Inode blocks per group: 512 >> >> >> Flex block group size: 16 >> >> >> Filesystem created: Sat May 25 14:59:50 2013 >> >> >> Last mount time: Sat Aug 24 11:04:25 2013 >> >> >> Last write time: Tue Sep 24 13:55:36 2013 >> >> >> Mount count: 0 >> >> >> Maximum mount count: -1 >> >> >> Last checked: Sat Aug 24 16:56:09 2013 >> >> >> Check interval: 0 (<none>) >> >> >> Lifetime writes: 107 GB >> >> >> Reserved blocks uid: 0 (user root) >> >> >> Reserved blocks gid: 0 (group root) >> >> >> First inode: 11 >> >> >> Inode size: 256 >> >> >> Required extra isize: 28 >> >> >> Desired extra isize: 28 >> >> >> Journal inode: 8 >> >> >> Default directory hash: half_md4 >> >> >> Directory Hash Seed: 01a8f605-b2bc-41ee-b7b5-11d843ab622f >> >> >> Journal backup: inode blocks >> >> >> FS Error count: 8 >> >> >> First error time: Sat Aug 24 13:44:55 2013 >> >> >> First error function: ext4_iget >> >> >> First error line #: 3889 >> >> >> First error inode #: 8 >> >> >> First error block #: 0 >> >> >> Last error time: Tue Sep 24 13:55:36 2013 >> >> >> Last error function: ext4_iget >> >> >> Last error line #: 3888 >> >> >> Last error inode #: 8 >> >> >> Last error block #: 0 >> >> >> dumpe2fs: Corrupt extent header while reading journal super block >> >> > OK, so really journal inode (inode #8) looks toast but superblock looks >> >> > OK. >> >> > >> >> >> So I attempted to clone the drive to a 2TB backup drive that is empty, >> >> >> and currently I am having more problems with the cloned drive than I >> >> >> am with the original. >> >> >> >> >> >> sandeen said something about using tune2fs to tell it to remove the >> >> >> has_journal flag, but I might need some assistance with that. >> >> > Yes, you can do that with: >> >> > tune2fs -f -O ^has_journal /dev/sda1 >> >> > >> >> > Let's see what mount will say after that. >> >> > >> >> > Another option is to run >> >> > debugfs /dev/sda1 >> >> > >> >> > Then you can use ls, cd, and other debugfs commands to move within the >> >> > filesystem and investigate things. If that will work, you have a reasonable >> >> > chance of getting at least some data back. >> >> > >> >> > Honza >> >> > -- >> >> > Jan Kara <jack@...e.cz> >> >> > SUSE Labs, CR >> >> >> >> >> >> On Wed, Sep 25, 2013 at 12:12 PM, Jan Kara <jack@...e.cz> wrote: >> >> > On Tue 24-09-13 22:25:49, InvTraySts wrote: >> >> >> So long story short, I had a server running that had a processor fail >> >> >> while powered on, causing the file systems to become corrupt. I >> >> >> replaced the motherboard, processor and power supply just to be on the >> >> >> safe side. However, I am at a bit of a loss as to what to do now. I >> >> >> was working sandeen in the OFTC IRC channel, but, on his >> >> >> recommendation he suggested me to post something to the mailing list. >> >> >> >> >> >> Lets start off with one drive at a time (I have 4 that are corrupt). >> >> >> The specific logical drive in question was in RAID1 on a Dell PERC 5/i >> >> >> card. >> >> >> If I try to mount this using: >> >> >> mount -t ext4 /dev/sda1 /media/tmp >> >> >> >> >> >> It complains in dmesg with the following output: >> >> >> 685621.845207] EXT4-fs error (device sda1): ext4_iget:3888: inode #8: >> >> >> comm mount: bad extra_isize (18013 != 256) >> >> >> [685621.845213] EXT4-fs (sda1): no journal found >> >> >> >> >> >> >> >> >> However, if I run dumpe2fs -f /dev/sda1 I get the following output: >> >> >> root@...ver:~# dumpe2fs -f /dev/sda1 >> >> >> dumpe2fs 1.42.5 (29-Jul-2012) >> >> >> Filesystem volume name: root >> >> >> Last mounted on: /media/ubuntu/root >> >> >> Filesystem UUID: f959e195-[removed] >> >> >> Filesystem magic number: 0xEF53 >> >> >> Filesystem revision #: 1 (dynamic) >> >> >> Filesystem features: has_journal ext_attr resize_inode dir_index >> >> >> filetype extent flex_bg sparse_super large_file huge_file uninit_bg >> >> >> dir_nlink extra_isize >> >> >> Filesystem flags: signed_directory_hash >> >> >> Default mount options: user_xattr acl >> >> >> Filesystem state: not clean with errors >> >> >> Errors behavior: Continue >> >> >> Filesystem OS type: Linux >> >> >> Inode count: 4849664 >> >> >> Block count: 19398144 >> >> >> Reserved block count: 969907 >> >> >> Free blocks: 17034219 >> >> >> Free inodes: 4592929 >> >> >> First block: 0 >> >> >> Block size: 4096 >> >> >> Fragment size: 4096 >> >> >> Reserved GDT blocks: 1019 >> >> >> Blocks per group: 32768 >> >> >> Fragments per group: 32768 >> >> >> Inodes per group: 8192 >> >> >> Inode blocks per group: 512 >> >> >> Flex block group size: 16 >> >> >> Filesystem created: Sat May 25 14:59:50 2013 >> >> >> Last mount time: Sat Aug 24 11:04:25 2013 >> >> >> Last write time: Tue Sep 24 13:55:36 2013 >> >> >> Mount count: 0 >> >> >> Maximum mount count: -1 >> >> >> Last checked: Sat Aug 24 16:56:09 2013 >> >> >> Check interval: 0 (<none>) >> >> >> Lifetime writes: 107 GB >> >> >> Reserved blocks uid: 0 (user root) >> >> >> Reserved blocks gid: 0 (group root) >> >> >> First inode: 11 >> >> >> Inode size: 256 >> >> >> Required extra isize: 28 >> >> >> Desired extra isize: 28 >> >> >> Journal inode: 8 >> >> >> Default directory hash: half_md4 >> >> >> Directory Hash Seed: 01a8f605-b2bc-41ee-b7b5-11d843ab622f >> >> >> Journal backup: inode blocks >> >> >> FS Error count: 8 >> >> >> First error time: Sat Aug 24 13:44:55 2013 >> >> >> First error function: ext4_iget >> >> >> First error line #: 3889 >> >> >> First error inode #: 8 >> >> >> First error block #: 0 >> >> >> Last error time: Tue Sep 24 13:55:36 2013 >> >> >> Last error function: ext4_iget >> >> >> Last error line #: 3888 >> >> >> Last error inode #: 8 >> >> >> Last error block #: 0 >> >> >> dumpe2fs: Corrupt extent header while reading journal super block >> >> > OK, so really journal inode (inode #8) looks toast but superblock looks >> >> > OK. >> >> > >> >> >> So I attempted to clone the drive to a 2TB backup drive that is empty, >> >> >> and currently I am having more problems with the cloned drive than I >> >> >> am with the original. >> >> >> >> >> >> sandeen said something about using tune2fs to tell it to remove the >> >> >> has_journal flag, but I might need some assistance with that. >> >> > Yes, you can do that with: >> >> > tune2fs -f -O ^has_journal /dev/sda1 >> >> > >> >> > Let's see what mount will say after that. >> >> > >> >> > Another option is to run >> >> > debugfs /dev/sda1 >> >> > >> >> > Then you can use ls, cd, and other debugfs commands to move within the >> >> > filesystem and investigate things. If that will work, you have a reasonable >> >> > chance of getting at least some data back. >> >> > >> >> > Honza >> >> > -- >> >> > Jan Kara <jack@...e.cz> >> >> > SUSE Labs, CR >> > -- >> > Jan Kara <jack@...e.cz> >> > SUSE Labs, CR > -- > Jan Kara <jack@...e.cz> > SUSE Labs, CR -- To unsubscribe from this list: send the line "unsubscribe linux-ext4" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists