The ohci-omap code has diverged from the working version in the linux-omap tree; this syncs up the versions: - Another clock is needed in various cases - The omap-1510 iommu code needs to be #ifdeffed out on newer parts - Saner use of the HCD framework - Various other changes, e.g. a Nokia 770 quirk And some minor dead-whitespace removal. Signed-off-by: David Brownell Index: o26/drivers/usb/host/ohci-omap.c =================================================================== --- o26.orig/drivers/usb/host/ohci-omap.c 2006-07-30 22:09:39.000000000 -0700 +++ o26/drivers/usb/host/ohci-omap.c 2006-07-31 06:09:56.000000000 -0700 @@ -4,7 +4,7 @@ * (C) Copyright 1999 Roman Weissgaerber * (C) Copyright 2000-2005 David Brownell * (C) Copyright 2002 Hewlett-Packard Company - * + * * OMAP Bus Glue * * Modified for OMAP by Tony Lindgren @@ -66,15 +66,20 @@ extern int usb_disabled(void); extern int ocpi_enable(void); static struct clk *usb_host_ck; +static struct clk *usb_dc_ck; +static int host_enabled; +static int host_initialized; static void omap_ohci_clock_power(int on) { if (on) { + clk_enable(usb_dc_ck); clk_enable(usb_host_ck); /* guesstimate for T5 == 1x 32K clock + APLL lock time */ udelay(100); } else { clk_disable(usb_host_ck); + clk_disable(usb_dc_ck); } } @@ -87,14 +92,14 @@ static int omap_ohci_transceiver_power(i if (on) { if (machine_is_omap_innovator() && cpu_is_omap1510()) fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL) - | ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), + | ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), INNOVATOR_FPGA_CAM_USB_CONTROL); else if (machine_is_omap_osk()) tps65010_set_gpio_out_value(GPIO1, LOW); } else { if (machine_is_omap_innovator() && cpu_is_omap1510()) fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL) - & ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), + & ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), INNOVATOR_FPGA_CAM_USB_CONTROL); else if (machine_is_omap_osk()) tps65010_set_gpio_out_value(GPIO1, HIGH); @@ -103,6 +108,7 @@ static int omap_ohci_transceiver_power(i return 0; } +#ifdef CONFIG_ARCH_OMAP15XX /* * OMAP-1510 specific Local Bus clock on/off */ @@ -121,8 +127,8 @@ static int omap_1510_local_bus_power(int /* * OMAP-1510 specific Local Bus initialization * NOTE: This assumes 32MB memory size in OMAP1510LB_MEMSIZE. - * See also arch/mach-omap/memory.h for __virt_to_dma() and - * __dma_to_virt() which need to match with the physical + * See also arch/mach-omap/memory.h for __virt_to_dma() and + * __dma_to_virt() which need to match with the physical * Local Bus address below. */ static int omap_1510_local_bus_init(void) @@ -130,7 +136,7 @@ static int omap_1510_local_bus_init(void unsigned int tlb; unsigned long lbaddr, physaddr; - omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4, + omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4, OMAP1510_LB_CLOCK_DIV); /* Configure the Local Bus MMU table */ @@ -138,7 +144,7 @@ static int omap_1510_local_bus_init(void lbaddr = tlb * 0x00100000 + OMAP1510_LB_OFFSET; physaddr = tlb * 0x00100000 + PHYS_OFFSET; omap_writel((lbaddr & 0x0fffffff) >> 22, OMAP1510_LB_MMU_CAM_H); - omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc, + omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc, OMAP1510_LB_MMU_CAM_L); omap_writel(physaddr >> 16, OMAP1510_LB_MMU_RAM_H); omap_writel((physaddr & 0x0000fc00) | 0x300, OMAP1510_LB_MMU_RAM_L); @@ -152,6 +158,10 @@ static int omap_1510_local_bus_init(void return 0; } +#else +#define omap_1510_local_bus_power(x) {} +#define omap_1510_local_bus_init() {} +#endif #ifdef CONFIG_USB_OTG @@ -173,13 +183,14 @@ static void start_hnp(struct ohci_hcd *o /*-------------------------------------------------------------------------*/ -static int omap_start_hc(struct ohci_hcd *ohci, struct platform_device *pdev) +static int ohci_omap_init(struct usb_hcd *hcd) { - struct omap_usb_config *config = pdev->dev.platform_data; + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + struct omap_usb_config *config = hcd->self.controller->platform_data; int need_transceiver = (config->otg != 0); int ret; - dev_dbg(&pdev->dev, "starting USB Controller\n"); + dev_dbg(hcd->self.controller, "starting USB Controller\n"); if (config->otg) { ohci_to_hcd(ohci)->self.otg_port = config->otg; @@ -200,7 +211,7 @@ static int omap_start_hc(struct ohci_hcd if (ohci->transceiver) { int status = otg_set_host(ohci->transceiver, &ohci_to_hcd(ohci)->self); - dev_dbg(&pdev->dev, "init %s transceiver, status %d\n", + dev_dbg(hcd->self.controller, "init %s transceiver, status %d\n", ohci->transceiver->label, status); if (status) { if (ohci->transceiver) @@ -208,7 +219,7 @@ static int omap_start_hc(struct ohci_hcd return status; } } else { - dev_err(&pdev->dev, "can't find transceiver\n"); + dev_err(hcd->self.controller, "can't find transceiver\n"); return -ENODEV; } } @@ -247,6 +258,10 @@ static int omap_start_hc(struct ohci_hcd } ohci_writel(ohci, rh, &ohci->regs->roothub.a); distrust_firmware = 0; + } else if (machine_is_nokia770()) { + /* We require a self-powered hub, which should have + * plenty of power. */ + ohci_to_hcd(ohci)->power_budget = 0; } /* FIXME khubd hub requests should manage power switching */ @@ -260,21 +275,15 @@ static int omap_start_hc(struct ohci_hcd return 0; } -static void omap_stop_hc(struct platform_device *pdev) +static void ohci_omap_stop(struct usb_hcd *hcd) { - dev_dbg(&pdev->dev, "stopping USB Controller\n"); + dev_dbg(hcd->self.controller, "stopping USB Controller\n"); omap_ohci_clock_power(0); } /*-------------------------------------------------------------------------*/ -void usb_hcd_omap_remove (struct usb_hcd *, struct platform_device *); - -/* configure so an HC device and id are always provided */ -/* always called with process context; sleeping is OK */ - - /** * usb_hcd_omap_probe - initialize OMAP-based HCDs * Context: !in_interrupt() @@ -283,7 +292,7 @@ void usb_hcd_omap_remove (struct usb_hcd * then invokes the start() method for the HCD associated with it * through the hotplug entry's driver_data. */ -int usb_hcd_omap_probe (const struct hc_driver *driver, +static int usb_hcd_omap_probe (const struct hc_driver *driver, struct platform_device *pdev) { int retval, irq; @@ -291,12 +300,12 @@ int usb_hcd_omap_probe (const struct hc_ struct ohci_hcd *ohci; if (pdev->num_resources != 2) { - printk(KERN_ERR "hcd probe: invalid num_resources: %i\n", + printk(KERN_ERR "hcd probe: invalid num_resources: %i\n", pdev->num_resources); return -ENODEV; } - if (pdev->resource[0].flags != IORESOURCE_MEM + if (pdev->resource[0].flags != IORESOURCE_MEM || pdev->resource[1].flags != IORESOURCE_IRQ) { printk(KERN_ERR "hcd probe: invalid resource type\n"); return -ENODEV; @@ -306,6 +315,17 @@ int usb_hcd_omap_probe (const struct hc_ if (IS_ERR(usb_host_ck)) return PTR_ERR(usb_host_ck); + if (!cpu_is_omap1510()) + usb_dc_ck = clk_get(0, "usb_dc_ck"); + else + usb_dc_ck = clk_get(0, "lb_ck"); + + if (IS_ERR(usb_dc_ck)) { + clk_put(usb_host_ck); + return PTR_ERR(usb_dc_ck); + } + + hcd = usb_create_hcd (driver, &pdev->dev, pdev->dev.bus_id); if (!hcd) { retval = -ENOMEM; @@ -325,9 +345,8 @@ int usb_hcd_omap_probe (const struct hc_ ohci = hcd_to_ohci(hcd); ohci_hcd_init(ohci); - retval = omap_start_hc(ohci, pdev); - if (retval < 0) - goto err2; + host_initialized = 0; + host_enabled = 1; irq = platform_get_irq(pdev, 0); if (irq < 0) { @@ -335,15 +354,21 @@ int usb_hcd_omap_probe (const struct hc_ goto err2; } retval = usb_add_hcd(hcd, irq, IRQF_DISABLED); - if (retval == 0) - return retval; + if (retval) + goto err2; - omap_stop_hc(pdev); + host_initialized = 1; + + if (!host_enabled) + omap_ohci_clock_power(0); + + return 0; err2: release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err1: usb_put_hcd(hcd); err0: + clk_put(usb_dc_ck); clk_put(usb_host_ck); return retval; } @@ -359,28 +384,36 @@ err0: * Reverses the effect of usb_hcd_omap_probe(), first invoking * the HCD's stop() method. It is always called from a thread * context, normally "rmmod", "apmd", or something similar. - * */ -void usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev) +static inline void +usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev) { + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + usb_remove_hcd(hcd); + if (ohci->transceiver) { + (void) otg_set_host(ohci->transceiver, 0); + put_device(ohci->transceiver->dev); + } if (machine_is_omap_osk()) omap_free_gpio(9); - omap_stop_hc(pdev); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); + clk_put(usb_dc_ck); clk_put(usb_host_ck); } /*-------------------------------------------------------------------------*/ -static int __devinit +static int ohci_omap_start (struct usb_hcd *hcd) { struct omap_usb_config *config; struct ohci_hcd *ohci = hcd_to_ohci (hcd); int ret; + if (!host_enabled) + return 0; config = hcd->self.controller->platform_data; if (config->otg || config->rwc) writel(OHCI_CTRL_RWC, &ohci->regs->control); @@ -409,8 +442,9 @@ static const struct hc_driver ohci_omap_ /* * basic lifecycle operations */ + .reset = ohci_omap_init, .start = ohci_omap_start, - .stop = ohci_stop, + .stop = ohci_omap_stop, /* * managing i/o requests and associated device resources @@ -446,13 +480,8 @@ static int ohci_hcd_omap_drv_probe(struc static int ohci_hcd_omap_drv_remove(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); - struct ohci_hcd *ohci = hcd_to_ohci (hcd); usb_hcd_omap_remove(hcd, dev); - if (ohci->transceiver) { - (void) otg_set_host(ohci->transceiver, 0); - put_device(ohci->transceiver->dev); - } platform_set_drvdata(dev, NULL); return 0; @@ -472,7 +501,7 @@ static int ohci_omap_suspend(struct plat omap_ohci_clock_power(0); ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED; - dev->power.power_state = PMSG_SUSPEND; + dev->dev.power.power_state = PMSG_SUSPEND; return 0; } @@ -485,8 +514,8 @@ static int ohci_omap_resume(struct platf ohci->next_statechange = jiffies; omap_ohci_clock_power(1); - dev->power.power_state = PMSG_ON; - usb_hcd_resume_root_hub(dev_get_drvdata(dev)); + dev->dev.power.power_state = PMSG_ON; + usb_hcd_resume_root_hub(platform_get_drvdata(dev)); return 0; }