Linux version 2.6.18-rc6 (root@alien8) (gcc version 4.1.2 20060814 (prerelease) (Debian 4.1.1-11)) #1 Tue Sep 5 19:31:46 BST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001f680000 (usable) BIOS-e820: 000000001f680000 - 000000001f700000 (ACPI NVS) BIOS-e820: 000000001f700000 - 0000000020000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 502MB LOWMEM available. found SMP MP-table at 000f7670 On node 0 totalpages: 128640 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 124544 pages, LIFO batch:31 DMI present. ACPI: RSDP (v000 TOSCPL ) @ 0x000f75e0 ACPI: RSDT (v001 TOSCPL Capell00 0x06040000 LTP 0x00000000) @ 0x1f681b68 ACPI: FADT (v001 TOSCPL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x1f688dfc ACPI: MADT (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x1f688e70 ACPI: HPET (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x1f688ed8 ACPI: MCFG (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x1f688f10 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1f688fd8 ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x1f688f7e ACPI: SSDT (v001 SataRe SataPri 0x00001000 INTL 0x20050624) @ 0x1f682b3c ACPI: SSDT (v001 SataRe SataSec 0x00001000 INTL 0x20050624) @ 0x1f6824aa ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20050624) @ 0x1f68228a ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20050624) @ 0x1f6820ae ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x1f681bb8 ACPI: DSDT (v001 TOSCPL CALISTGA 0x06040000 INTL 0x20050624) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: 2 duplicate APIC table ignored. ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:14 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000) Detected 1862.189 MHz processor. Built 1 zonelists. Total pages: 128640 Kernel command line: BOOT_IMAGE=2.6.18-rc6 ro root=802 video=intelfb:1280x800-32@60 pci=assign-busses log_buf_len=128k resume2=swap:/dev/sda3 log_buf_len: 131072 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 506632k/514560k available (1724k kernel code, 7504k reserved, 862k data, 148k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3728.17 BogoMIPS (lpj=7456358) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9fbff 00100000 00000000 00000940 0000c189 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel Genuine Intel(R) CPU T1350 @ 1.86GHz stepping 08 Checking 'hlt' instruction... OK. ACPI: Core revision 20060707 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:01: ioport range 0xfe00-0xfe7f has been reserved pnp: 00:01: ioport range 0xfe80-0xfeff has been reserved pnp: 00:01: ioport range 0xff00-0xff7f has been reserved PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 IO window: 2000-2fff MEM window: d6000000-d7ffffff PREFETCH window: d0000000-d1ffffff PCI: Bridge: 0000:00:1c.1 IO window: 3000-3fff MEM window: d8000000-d9ffffff PREFETCH window: d2000000-d3ffffff PCI: Bridge: 0000:00:1c.2 IO window: 4000-4fff MEM window: da000000-dbffffff PREFETCH window: d4000000-d5ffffff PCI: Bus 5, cardbus bridge: 0000:04:04.0 IO window: 00005400-000054ff IO window: 00005800-000058ff PREFETCH window: 30000000-31ffffff MEM window: 32000000-33ffffff PCI: Bridge: 0000:00:1e.0 IO window: 5000-5fff MEM window: dc000000-dc0fffff PREFETCH window: 30000000-31ffffff ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1c.2 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 16 (level, low) -> IRQ 177 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered Simple Boot Flag at 0x36 set to 0x1 Machine check exception polling timer started. Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] Allocate Port Service[0000:00:1c.1:pcie03] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] Allocate Port Service[0000:00:1c.2:pcie03] ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID0] ACPI: Power Button (CM) [PWRB] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Using specific hotkey driver ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Getting cpuindex for acpiid 0x1 Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 945GM Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xc0000000 [drm] Initialized drm 1.0.1 20051102 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177 [drm] Initialized i915 1.5.0 20060119 on minor 0 intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets intelfb: Version 0.9.4 intelfb: 00:02.0: Intel(R) 945GM, aperture size 256MB, stolen memory 7932kB intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode switching. intelfb: Video mode must be programmed at boot time. libata version 2.00 loaded. ata_piix 0000:00:1f.2: version 2.00 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14 scsi0 : ata_piix ata1.00: ATA-6, max UDMA/100, 78140160 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/100 Vendor: ATA Model: TOSHIBA MK4032GS Rev: AS21 Type: Direct-Access ANSI SCSI revision: 05 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18B8 irq 15 scsi1 : ata_piix ata2.00: ATAPI, max UDMA/33 ata2.00: configured for UDMA/33 Vendor: MATSHITA Model: DVD-RAM UJ-841S Rev: 1.60 Type: CD-ROM ANSI SCSI revision: 05 SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > sd 0:0:0:0: Attached scsi disk sda sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 233, io mem 0xdc444000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 233, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 225, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 185, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 177, io base 0x00001880 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 i2c /dev entries driver ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 225 TCP bic registered NET: Registered protocol family 1 Using IPI Shortcut mode ACPI: (supports S0 S3 S4 S5) Time: tsc clocksource has been installed. Time: acpi_pm clocksource has been installed. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 148k freed input: AT Translated Set 2 keyboard as /class/input/input1 input: PS/2 Mouse as /class/input/input2 input: AlpsPS/2 ALPS GlidePoint as /class/input/input3 input: PS/2 Mouse as /class/input/input4 input: AlpsPS/2 ALPS GlidePoint as /class/input/input5 sdhci: Secure Digital Host Controller Interface driver, 0.12 sdhci: Copyright(c) Pierre Ossman sdhci: SDHCI controller found at 0000:04:04.2 [1524:0550] (rev 1) ACPI: PCI Interrupt 0000:04:04.2[B] -> GSI 17 (level, low) -> IRQ 169 mmc0: SDHCI at 0xdc001c00 irq 169 DMA r8169 Gigabit Ethernet driver 2.2LK loaded ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:03:00.0 to 64 eth0: RTL8101e at 0xe0032000, 00:16:d4:27:9e:42, IRQ 185 Yenta: CardBus bridge found at 0000:04:04.0 [1179:ff01] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:04:04.0, mfunc 0x89501212, devctl 0x44 Yenta: ISA IRQ mask 0x0cf8, PCI irq 177 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50 PCI: Setting latency timer of device 0000:00:1b.0 to 64 hda_codec: Unknown model for ALC861, trying auto-probe from BIOS... Adding 1052232k swap on /dev/sda3. Priority:-1 extents:1 across:1052232k EXT3 FS on sda2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. r8169: eh0: link down r8169: eh0: link down NET: Registered protocol family 17