lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Wed, 25 Oct 2006 16:59:57 -0700
From:	Randy Dunlap <randy.dunlap@...cle.com>
To:	David Brownell <david-b@...bell.net>
Cc:	toralf.foerster@....de, netdev@...r.kernel.org,
	linux-usb-devel@...ts.sourceforge.net, link@...gy.org,
	greg@...ah.com, akpm@...l.org, zippel@...ux-m68k.org,
	torvalds@...l.org, linux-kernel@...r.kernel.org,
	dbrownell@...rs.sourceforge.net
Subject: [PATCH 1/2] !CONFIG_NET_ETHERNET unsets CONFIG_PHYLIB, but 
 CONFIG_USB_USBNET also needs CONFIG_PHYLIB

On Wed, 25 Oct 2006 15:27:09 -0700 David Brownell wrote:

> The other parts are right, this isn't.
> 
> Instead, "usbnet.c" should #ifdef the relevant ethtool hooks
> according to CONFIG_MII ... since it's completely legit to
> use usbnet with peripherals that don't need MII.

Ugh.  OK.  How's this?  (2 patches)

(oh, OP mentioned CONFIG_PHYLIB but it's actually CONFIG_MII AFAIK)

---
From: Randy Dunlap <randy.dunlap@...cle.com>

pegasus and mcs7830 drivers use MII interfaces and should
select MII in the same way that drivers/net/ drivers do.

However, the MII config symbol should not be in the 10/100 Ethernet
menu, so that other drivers can use (enable) it or so that users
can enable it without needing to enable 10/100 Ethernet.

Signed-off-by: Randy Dunlap <randy.dunlap@...cle.com>
---
 drivers/net/Kconfig     |   15 +++++++--------
 drivers/usb/net/Kconfig |    2 ++
 2 files changed, 9 insertions(+), 8 deletions(-)

--- linux-2619-rc3-pv.orig/drivers/usb/net/Kconfig
+++ linux-2619-rc3-pv/drivers/usb/net/Kconfig
@@ -84,6 +84,7 @@ config USB_PEGASUS
 config USB_RTL8150
 	tristate "USB RTL8150 based ethernet device support (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
+	select MII
 	help
 	  Say Y here if you have RTL8150 based usb-ethernet adapter.
 	  Send me <petkan@...rs.sourceforge.net> any comments you may have.
@@ -210,6 +211,7 @@ config USB_NET_PLUSB
 config USB_NET_MCS7830
 	tristate "MosChip MCS7830 based Ethernet adapters"
 	depends on USB_USBNET
+	select MII
 	help
 	  Choose this option if you're using a 10/100 Ethernet USB2
 	  adapter based on the MosChip 7830 controller. This includes
--- linux-2619-rc3-pv.orig/drivers/net/Kconfig
+++ linux-2619-rc3-pv/drivers/net/Kconfig
@@ -145,6 +145,13 @@ config NET_SB1000
 
 source "drivers/net/arcnet/Kconfig"
 
+config MII
+	tristate "Generic Media Independent Interface device support"
+	help
+	  Most ethernet controllers have MII transceiver either as an external
+	  or internal device.  It is safe to say Y or M here even if your
+	  ethernet card lacks MII.
+
 source "drivers/net/phy/Kconfig"
 
 #
@@ -180,14 +187,6 @@ config NET_ETHERNET
 	  kernel: saying N will just cause the configurator to skip all
 	  the questions about Ethernet network cards. If unsure, say N.
 
-config MII
-	tristate "Generic Media Independent Interface device support"
-	depends on NET_ETHERNET
-	help
-	  Most ethernet controllers have MII transceiver either as an external
-	  or internal device.  It is safe to say Y or M here even if your
-	  ethernet card lack MII.
-
 source "drivers/net/arm/Kconfig"
 
 config MACE
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ