| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 07 Nov 2006 17:28:55 -0800
From: "Darrick J. Wong" <djwong@...ibm.com>
To: linux-scsi <linux-scsi@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
CC: Alexis Bruemmer <alexisb@...ibm.com>
Subject: [PATCH] Handle REQ_DEVICE_RESET in aic94xx
As promised last week, this patch implements a REQ_DEVICE_RESET handler
for the aic94xx driver. Like the earlier REQ_TASK_ABORT patch, this
patch defers the device reset to the Scsi_Host's workqueue, which has
the added benefit of ensuring that the device reset does not happen at
the same time that the abort tmfs are being processed. After the phy
reset, the busted drive should go away and be re-detected later, which
is indeed what I've seen on both a x260 and a x206m.
Questions/comments? This is also a work in progress.
Signed-off-by: Darrick J. Wong <djwong@...ibm.com>
--
diff --git a/drivers/scsi/aic94xx/aic94xx_scb.c b/drivers/scsi/aic94xx/aic94xx_scb.c
index 1911c5d..ab77ed7 100644
--- a/drivers/scsi/aic94xx/aic94xx_scb.c
+++ b/drivers/scsi/aic94xx/aic94xx_scb.c
@@ -342,6 +342,27 @@ void asd_invalidate_edb(struct asd_ascb
asd_printk("couldn't post escb, err:%d\n", i);
}
}
+
+/* hard reset a phy later */
+static void do_phy_reset_later(void *data)
+{
+ struct sas_phy *sas_phy = data;
+ int error;
+
+ ASD_DPRINTK("%s: About to hard reset phy %d\n", __FUNCTION__,
+ sas_phy->identify.phy_identifier);
+ /* Reset device port */
+ error = sas_phy_reset(sas_phy, 1);
+ if (error)
+ ASD_DPRINTK("%s: Hard reset of phy %d failed (%d).\n",
+ __FUNCTION__, sas_phy->identify.phy_identifier, error);
+}
+
+static void phy_reset_later(struct sas_phy *sas_phy, struct Scsi_Host *shost)
+{
+ INIT_WORK(&sas_phy->reset_work, do_phy_reset_later, sas_phy);
+ queue_work(shost->work_q, &sas_phy->reset_work);
+}
/* start up the ABORT TASK tmf... */
static void task_kill_later(struct asd_ascb *ascb)
@@ -402,7 +423,9 @@ static void escb_tasklet_complete(struct
goto out;
}
case REQ_DEVICE_RESET: {
- struct asd_ascb *a, *b;
+ struct Scsi_Host *shost = sas_ha->core.shost;
+ struct sas_phy *dev_phy;
+ struct asd_ascb *a;
u16 conn_handle;
conn_handle = *((u16*)(&dl->status_block[1]));
@@ -412,17 +435,31 @@ static void escb_tasklet_complete(struct
dl->status_block[3]);
/* Kill all pending tasks and reset the device */
- list_for_each_entry_safe(a, b, &asd_ha->seq.pend_q, list) {
- struct sas_task *task = a->uldd_task;
- struct domain_device *dev = task->dev;
+ dev_phy = NULL;
+ list_for_each_entry(a, &asd_ha->seq.pend_q, list) {
+ struct sas_task *task;
+ struct domain_device *dev;
u16 x;
- x = *((u16*)(&dev->lldd_dev));
- if (x == conn_handle)
+ task = a->uldd_task;
+ if (!task)
+ continue;
+ dev = task->dev;
+
+ x = (u16)dev->lldd_dev;
+ if (x == conn_handle) {
+ dev_phy = dev->port->phy;
task_kill_later(a);
+ }
}
- /* FIXME: Reset device port (huh?) */
+ /* Reset device port */
+ if (!dev_phy) {
+ ASD_DPRINTK("%s: No pending commands; can't reset.\n",
+ __FUNCTION__);
+ goto out;
+ }
+ phy_reset_later(dev_phy, shost);
goto out;
}
case SIGNAL_NCQ_ERROR:
diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c
index a2b479a..0fb347b 100644
--- a/drivers/scsi/libsas/sas_init.c
+++ b/drivers/scsi/libsas/sas_init.c
@@ -144,7 +144,7 @@ static int sas_get_linkerrors(struct sas
return sas_smp_get_phy_events(phy);
}
-static int sas_phy_reset(struct sas_phy *phy, int hard_reset)
+int sas_phy_reset(struct sas_phy *phy, int hard_reset)
{
int ret;
enum phy_func reset_type;
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 8bb8eea..c4d8243 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -925,3 +925,4 @@ EXPORT_SYMBOL_GPL(sas_slave_alloc);
EXPORT_SYMBOL_GPL(sas_target_destroy);
EXPORT_SYMBOL_GPL(sas_ioctl);
EXPORT_SYMBOL_GPL(sas_task_abort);
+EXPORT_SYMBOL_GPL(sas_phy_reset);
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index 7da678d..921db78 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -605,6 +605,7 @@ struct sas_domain_function_template {
extern int sas_register_ha(struct sas_ha_struct *);
extern int sas_unregister_ha(struct sas_ha_struct *);
+int sas_phy_reset(struct sas_phy *phy, int hard_reset);
int sas_queue_up(struct sas_task *task);
extern int sas_queuecommand(struct scsi_cmnd *,
void (*scsi_done)(struct scsi_cmnd *));
diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h
index 5302437..59633a8 100644
--- a/include/scsi/scsi_transport_sas.h
+++ b/include/scsi/scsi_transport_sas.h
@@ -73,6 +73,8 @@ struct sas_phy {
/* for the list of phys belonging to a port */
struct list_head port_siblings;
+
+ struct work_struct reset_work;
};
#define dev_to_phy(d) \
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists