| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 9 Dec 2006 02:46:27 +0000 From: Alan <alan@...rguk.ukuu.org.uk> To: Ben Collins <ben.collins@...ntu.com> Cc: Ralf Baechle <ralf@...ux-mips.org>, Andrew Morton <akpm@...l.org>, linux-kernel@...r.kernel.org Subject: Re: [PATCH] PCI legacy resource fix > Checking the patch, my problem is that the old way, all BAR's were being > set at start = end = flags = 0. The patch makes it set all the BAR's to Yes the old quirk used to blank the resources as the values on the chip are undefined and random. This gives you corrupt resource trees and needs hacks in the drivers as well > the normal values. This is what it looks like in lspci, pre this patch: > > Region 0: I/O ports at <unassigned> > Region 1: I/O ports at <unassigned> > Region 2: I/O ports at <unassigned> > Region 3: I/O ports at <unassigned> Then your device is in legacy mode, or was disabled > So my device is not running in compatibility mode, and should not have The paste you have their shows that it almost certainly is in legacy mode. > the BAR's set, as Alan's patch does. Dump the class code and other bits during boot check how your device is seen (native v legacy/compatibility) and whether the fixup logic triggers. It should only trigger for legacy devices. Alan - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists