: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 759MB LOWMEM available. Entering add_active_range(0, 0, 194512) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 194512 HighMem 194512 -> 194512 early_node_map[1] active PFN ranges 0: 0 -> 194512 On node 0 totalpages: 194512 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1487 pages used for memmap Normal zone: 188929 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap DMI 2.4 present. Using APIC driver default ACPI: RSDP (v000 HP ) @ 0x000f7d70 ACPI: RSDT (v001 HP 30AA 0x28040620 HP 0x00000001) @ 0x2f7e5684 ACPI: FADT (v002 HP 30AA 0x00000002 HP 0x00000001) @ 0x2f7e5600 ACPI: MADT (v001 HP 30AA 0x00000001 HP 0x00000001) @ 0x2f7e56c4 ACPI: MCFG (v001 HP 30AA 0x00000001 HP 0x00000001) @ 0x2f7e572c ACPI: TCPA (v002 HP 30AA 0x00000001 HP 0x00000001) @ 0x2f7e5768 ACPI: SSDT (v001 HP HPQSAT 0x00000001 MSFT 0x0100000e) @ 0x2f7f4afc ACPI: SSDT (v001 HP Cpu0Cst 0x00003001 INTL 0x20050624) @ 0x2f7f4e58 ACPI: SSDT (v001 HP CpuPm 0x00003000 INTL 0x20050624) @ 0x2f7f5033 ACPI: DSDT (v001 HP nc6340 0x00010000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:14 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 2f800000:cf400000) Detected 1463.105 MHz processor. Built 1 zonelists. Total pages: 192993 Kernel command line: root=/dev/mapper/crypt0 cryptopts=target=crypt0,source=/dev/mapper/Komodo-KMDOFS ro vga=791 single mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 758672k/778048k available (1952k kernel code, 18688k reserved, 812k data, 228k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffe16000 - 0xfffff000 (1956 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf0000000 - 0xff7fe000 ( 247 MB) lowmem : 0xc0000000 - 0xef7d0000 ( 759 MB) .init : 0xc03ba000 - 0xc03f3000 ( 228 kB) .data : 0xc02e8269 - 0xc03b32f4 ( 812 kB) .text : 0xc0100000 - 0xc02e8269 (1952 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 2928.22 BogoMIPS (lpj=1464112) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 0000c109 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: afe9fbff 00100000 00000000 00002940 0000c109 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 13k freed ACPI: Core revision 20060707 CPU0: Intel(R) Celeron(R) M CPU 410 @ 1.46GHz stepping 08 Total of 1 processors activated (2928.22 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 1 CPUs PM: Adding info for No Bus:platform HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. NET: Registered protocol family 16 PM: Adding info for No Bus:vtcon0 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at f8000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=8 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing PM: Adding info for acpi:acpi ACPI: PCI Root Bridge [C002] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.C002] bus is 0 PM: Adding info for No Bus:pci0000:00 Boot video device is 0000:00:02.0 PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1100-113f claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT] PM: Adding info for pci:0000:00:00.0 PM: Adding info for pci:0000:00:02.0 PM: Adding info for pci:0000:00:02.1 PM: Adding info for pci:0000:00:1b.0 PM: Adding info for pci:0000:00:1c.0 PM: Adding info for pci:0000:00:1d.0 PM: Adding info for pci:0000:00:1d.1 PM: Adding info for pci:0000:00:1d.2 PM: Adding info for pci:0000:00:1d.3 PM: Adding info for pci:0000:00:1d.7 PM: Adding info for pci:0000:00:1e.0 PM: Adding info for pci:0000:00:1f.0 PM: Adding info for pci:0000:00:1f.1 PM: Adding info for pci:0000:00:1f.2 PM: Adding info for pci:0000:08:00.0 PM: Adding info for pci:0000:02:06.0 PM: Adding info for pci:0000:02:06.1 PM: Adding info for pci:0000:02:0e.0 ACPI: PCI Interrupt Routing Table [\_SB_.C002.C092._PRT] ACPI: Power Resource [C20B] (on) ACPI: PCI Interrupt Routing Table [\_SB_.C002.C0FB._PRT] ACPI: Power Resource [C213] (off) ACPI: PCI Interrupt Link [C107] (IRQs 10 *11) ACPI: PCI Interrupt Link [C108] (IRQs *10 11) ACPI: PCI Interrupt Link [C109] (IRQs *10 11) ACPI: PCI Interrupt Link [C10A] (IRQs *10 11) ACPI: PCI Interrupt Link [C123] (IRQs *10 11) ACPI: PCI Interrupt Link [C124] (IRQs 10 *11) ACPI: PCI Interrupt Link [C125] (IRQs 10 11) *0, disabled. ACPI Exception (pci_link-0180): AE_NOT_FOUND, Evaluating _PRS [20060707] ACPI: Power Resource [C308] (off) ACPI: Power Resource [C309] (off) ACPI: Power Resource [C30A] (off) ACPI: Power Resource [C30B] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init PM: Adding info for No Bus:pnp0 PM: Adding info for pnp:00:00 PM: Adding info for pnp:00:01 PM: Adding info for pnp:00:02 PM: Adding info for pnp:00:03 PM: Adding info for pnp:00:04 PM: Adding info for pnp:00:05 PM: Adding info for pnp:00:06 PM: Adding info for pnp:00:07 PM: Adding info for pnp:00:08 PM: Adding info for pnp:00:09 PM: Adding info for pnp:00:0a pnp: PnP ACPI: found 11 devices PnPBIOS: Disabled by ACPI PNP intel_rng: FWH not detected usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:09: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:09: ioport range 0x1000-0x107f could not be reserved pnp: 00:09: ioport range 0x1100-0x113f has been reserved pnp: 00:09: ioport range 0x1200-0x121f has been reserved PM: Adding info for No Bus:mem PM: Adding info for No Bus:kmem PM: Adding info for No Bus:null PM: Adding info for No Bus:port PM: Adding info for No Bus:zero PM: Adding info for No Bus:full PM: Adding info for No Bus:random PM: Adding info for No Bus:urandom PM: Adding info for No Bus:kmsg PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: e8000000-e80fffff PREFETCH window: disabled. PCI: Bus 3, cardbus bridge: 0000:02:06.0 IO window: 00002000-000020ff IO window: 00002400-000024ff PREFETCH window: 30000000-31ffffff MEM window: 32000000-33ffffff PCI: Bridge: 0000:00:1e.0 IO window: 2000-2fff MEM window: e8100000-e83fffff PREFETCH window: 30000000-31ffffff ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 17 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 8454k freed PM: Adding info for platform:pcspkr apm: BIOS not found. PM: Adding info for No Bus:snapshot audit: initializing netlink socket (disabled) audit(1166107882.493:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] PM: Adding info for pci_express:0000:00:1c.0:pcie00 Allocate Port Service[0000:00:1c.0:pcie02] PM: Adding info for pci_express:0000:00:1c.0:pcie02 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 PM: Adding info for platform:vesafb.0 vesafb: framebuffer at 0xd0000000, mapped to 0xf0080000, using 6144k, total 7872k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: protected mode interface info at 00ff:44f0 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 PM: Adding info for No Bus:fb0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 213047 bytes,<6>...found (1024x768, 212951 bytes, v3). PM: Adding info for No Bus:vtcon1 Console: switching to colour frame buffer device 122x40 fb0: VESA VGA frame buffer device ACPI: Transitioning device [C30C] to D3 ACPI: Transitioning device [C30C] to D3 ACPI: Fan [C30C] (off) ACPI: Transitioning device [C30D] to D3 ACPI: Transitioning device [C30D] to D3 ACPI: Fan [C30D] (off) ACPI: Transitioning device [C30E] to D3 ACPI: Transitioning device [C30E] to D3 ACPI: Fan [C30E] (off) ACPI: Transitioning device [C30F] to D3 ACPI: Transitioning device [C30F] to D3 ACPI: Fan [C30F] (off) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x2 ACPI: Thermal Zone [TZ0] (49 C) ACPI: Thermal Zone [TZ1] (46 C) ACPI: Thermal Zone [TZ2] (41 C) ACPI: Thermal Zone [TZ3] (29 C) ACPI: Thermal Zone [TZ4] (71 C) PM: Adding info for No Bus:pnp1 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PM: Adding info for No Bus:tty PM: Adding info for No Bus:console PM: Adding info for No Bus:ptmx PM: Adding info for No Bus:tty0 PM: Adding info for No Bus:vcs PM: Adding info for No Bus:vcsa PM: Adding info for No Bus:tty1 PM: Adding info for No Bus:tty2 PM: Adding info for No Bus:tty3 PM: Adding info for No Bus:tty4 PM: Adding info for No Bus:tty5 PM: Adding info for No Bus:tty6 PM: Adding info for No Bus:tty7 PM: Adding info for No Bus:tty8 PM: Adding info for No Bus:tty9 PM: Adding info for No Bus:tty10 PM: Adding info for No Bus:tty11 PM: Adding info for No Bus:tty12 PM: Adding info for No Bus:tty13 PM: Adding info for No Bus:tty14 PM: Adding info for No Bus:tty15 PM: Adding info for No Bus:tty16 PM: Adding info for No Bus:tty17 PM: Adding info for No Bus:tty18 PM: Adding info for No Bus:tty19 PM: Adding info for No Bus:tty20 PM: Adding info for No Bus:tty21 PM: Adding info for No Bus:tty22 PM: Adding info for No Bus:tty23 PM: Adding info for No Bus:tty24 PM: Adding info for No Bus:tty25 PM: Adding info for No Bus:tty26 PM: Adding info for No Bus:tty27 PM: Adding info for No Bus:tty28 PM: Adding info for No Bus:tty29 PM: Adding info for No Bus:tty30 PM: Adding info for No Bus:tty31 PM: Adding info for No Bus:tty32 PM: Adding info for No Bus:tty33 PM: Adding info for No Bus:tty34 PM: Adding info for No Bus:tty35 PM: Adding info for No Bus:tty36 PM: Adding info for No Bus:tty37 PM: Adding info for No Bus:tty38 PM: Adding info for No Bus:tty39 PM: Adding info for No Bus:tty40 PM: Adding info for No Bus:tty41 PM: Adding info for No Bus:tty42 PM: Adding info for No Bus:tty43 PM: Adding info for No Bus:tty44 PM: Adding info for No Bus:tty45 PM: Adding info for No Bus:tty46 PM: Adding info for No Bus:tty47 PM: Adding info for No Bus:tty48 PM: Adding info for No Bus:tty49 PM: Adding info for No Bus:tty50 PM: Adding info for No Bus:tty51 PM: Adding info for No Bus:tty52 PM: Adding info for No Bus:tty53 PM: Adding info for No Bus:tty54 PM: Adding info for No Bus:tty55 PM: Adding info for No Bus:tty56 PM: Adding info for No Bus:tty57 PM: Adding info for No Bus:tty58 PM: Adding info for No Bus:tty59 PM: Adding info for No Bus:tty60 PM: Adding info for No Bus:tty61 PM: Adding info for No Bus:tty62 PM: Adding info for No Bus:tty63 PM: Adding info for No Bus:rtc Real Time Clock Driver v1.12ac PM: Adding info for No Bus:hpet PM: Adding info for No Bus:nvram Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 945GM Chipset. agpgart: Detected 7932K stolen memory. PM: Adding info for No Bus:agpgart agpgart: AGP aperture is 256M @ 0xd0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled PM: Adding info for platform:serial8250 PM: Adding info for No Bus:ttyS0 PM: Adding info for No Bus:ttyS1 PM: Adding info for No Bus:ttyS2 PM: Adding info for No Bus:ttyS3 PM: Adding info for No Bus:isa RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Yenta: CardBus bridge found at 0000:02:06.0 [103c:30aa] Yenta: Enabling burst memory read transactions Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:06.0, mfunc 0x01a61b22, devctl 0x64 Yenta: ISA IRQ mask 0x0cf8, PCI irq 17 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06 pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff cs: IO port probe 0x2000-0x2fff: clean. pcmcia: parent PCI bridge Memory window: 0xe8100000 - 0xe83fffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff usbcore: registered new interface driver libusual usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:C208,PNP0f13:C209] at 0x60,0x64 irq 1,12 PM: Adding info for platform:i8042 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 PM: Adding info for serio:serio0 mice: PS/2 mouse device common for all mice PM: Adding info for serio:serio1 TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode ACPI: (supports S0 S3 S4 S5) Time: tsc clocksource has been installed. Freeing unused kernel memory: 228k freed Time: acpi_pm clocksource has been installed. PM: Adding info for serio:serio2 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Adding info for serio:serio3 PM: Adding info for serio:serio4 synaptics reset failed synaptics reset failed synaptics reset failed Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000 serio: Synaptics pass-through port at isa0060/serio4/input0 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 18, io base 0x00006020 PM: Adding info for usb:usb1 PM: Adding info for No Bus:usbdev1.1_ep00 usb usb1: configuration #1 chosen from 1 choice PM: Adding info for usb:1-0:1.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected input: SynPS/2 Synaptics TouchPad as /class/input/input0 input: AT Translated Set 2 keyboard as /class/input/input1 PM: Adding info for serio:serio5 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PM: Adding info for No Bus:usbdev1.1_ep81 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006040 PM: Adding info for usb:usb2 PM: Adding info for No Bus:usbdev2.1_ep00 usb usb2: configuration #1 chosen from 1 choice PM: Adding info for usb:2-0:1.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected SCSI subsystem initialized libata version 2.00 loaded. ieee1394: Initialized config rom entry `ip1394' PM: Adding info for No Bus:usbdev2.1_ep81 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 17, io base 0x00006060 PM: Adding info for usb:usb3 PM: Adding info for No Bus:usbdev3.1_ep00 usb usb3: configuration #1 chosen from 1 choice PM: Adding info for usb:3-0:1.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PM: Adding info for No Bus:usbdev3.1_ep81 ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 20, io base 0x00006080 PM: Adding info for usb:usb4 PM: Adding info for No Bus:usbdev4.1_ep00 usb usb4: configuration #1 chosen from 1 choice PM: Adding info for usb:4-0:1.0 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected PM: Adding info for No Bus:usbdev4.1_ep81 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 18, io mem 0xe8584000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 PM: Adding info for usb:usb5 PM: Adding info for No Bus:usbdev5.1_ep00 usb usb5: configuration #1 chosen from 1 choice PM: Adding info for usb:5-0:1.0 hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected PM: Adding info for No Bus:usbdev5.1_ep81 ahci 0000:00:1f.2: version 2.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part ata1: SATA max UDMA/133 cmd 0xF080C100 ctl 0x0 bmdma 0x0 irq 222 ata2: SATA max UDMA/133 cmd 0xF080C180 ctl 0x0 bmdma 0x0 irq 222 ata3: SATA max UDMA/133 cmd 0xF080C200 ctl 0x0 bmdma 0x0 irq 222 ata4: SATA max UDMA/133 cmd 0xF080C280 ctl 0x0 bmdma 0x0 irq 222 scsi0 : ahci PM: Adding info for No Bus:host0 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) ata1: port is slow to respond, please be patient (Status 0x80) ata1: port failed to respond (30 secs, Status 0x80) ata1: COMRESET failed (device not ready) ata1: hardreset failed, retrying in 5 secs ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-6, max UDMA/33, 32503808 sectors: LBA ata1.00: ata1: dev 0 multi count 1 ata1.00: applying bridge limits ata1.00: configured for UDMA/33 scsi1 : ahci PM: Adding info for No Bus:host1 ata2: SATA link down (SStatus 0 SControl 0) scsi2 : ahci PM: Adding info for No Bus:host2 ata3: SATA link down (SStatus 0 SControl 0) scsi3 : ahci PM: Adding info for No Bus:host3 ata4: SATA link down (SStatus 0 SControl 0) PM: Adding info for No Bus:target0:0:0 scsi 0:0:0:0: Direct-Access ATA PQI SATA DiskOnM YUAN PQ: 0 ANSI: 5 PM: Adding info for scsi:0:0:0:0 ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 ICH7: chipset revision 1 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x60a0-0x60a7, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... SCSI device sda: 32503808 512-byte hdwr sectors (16642 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: disabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 32503808 512-byte hdwr sectors (16642 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda hda: HL-DT-STCD-RW/DVD DRIVE GCC-4244N, ATAPI CD/DVD-ROM drive PM: Adding info for No Bus:ide0 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 PM: Adding info for ide:0.0 ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 19 (level, low) -> IRQ 20 PM: Adding info for ieee1394:fw-host0 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[e8101000-e81017ff] Max Packet=[2048] IR/IT contexts=[4/8] b44.c:v1.01 (Jun 16, 2006) ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 16 (level, low) -> IRQ 16 eth0: Broadcom 4400 10/100BaseT Ethernet 00:15:60:ca:47:d4 hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 PM: Adding info for No Bus:device-mapper device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded Probing IDE interface ide1... EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. security: 3 users, 6 roles, 1560 types, 166 bools, 1 sens, 1024 cats security: 58 classes, 48173 rules security: class context not defined in policy security: class dccp_socket not defined in policy security: permission dccp_recv in class node not defined in policy security: permission dccp_send in class node not defined in policy security: permission dccp_recv in class netif not defined in policy security: permission dccp_send in class netif not defined in policy security: permission setsockcreate in class process not defined in policy SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-3, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), not configured for labeling SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1166107938.720:2): policy loaded auid=4294967295 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation PM: Adding info for No Bus:timer input: PC Speaker as /class/input/input2 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006) PM: Adding info for platform:iTCO_wdt iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) PM: Adding info for No Bus:watchdog iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.1.3d ipw3945: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:08:00.0 to 64 ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection PM: Adding info for No Bus:0000:08:00.0 sd 0:0:0:0: Attached scsi generic sg0 type 0 PM: Adding info for No Bus:seq PM: Adding info for No Bus:sequencer PM: Adding info for No Bus:sequencer2 PM: Removing info for No Bus:0000:08:00.0 cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1b.0 to 64 PM: Adding info for No Bus:card0 PM: Adding info for No Bus:pcmC0D6p PM: Adding info for No Bus:pcmC0D6c PM: Adding info for No Bus:pcmC0D0p PM: Adding info for No Bus:pcmC0D0c PM: Adding info for No Bus:dsp PM: Adding info for No Bus:audio PM: Adding info for No Bus:controlC0 PM: Adding info for No Bus:mixer Floppy drive(s): fd0 is 1.44M audit(1166136745.539:3): avc: denied { getattr } for pid=2354 comm="pam_console_app" name="hda" dev=tmpfs ino=3522 scontext=system_u:system_r:pam_console_t:s0-s0:c0.c1023 tcontext=system_u:object_r:device_t:s0 tclass=blk_file audit(1166136745.831:4): avc: denied { setattr } for pid=2338 comm="pam_console_app" name="hda" dev=tmpfs ino=3522 scontext=system_u:system_r:pam_console_t:s0-s0:c0.c1023 tcontext=system_u:object_r:device_t:s0 tclass=blk_file shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 floppy0: no floppy controllers found Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found lp: driver loaded but no devices found ACPI: AC Adapter [C1B2] (on-line) ACPI: Battery Slot [C1B4] (battery present) ACPI: Battery Slot [C1B3] (battery absent) ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [C231] ACPI: Lid Switch [C22A] Using specific hotkey driver ibm_acpi: ec object not found ACPI: Video Device [C07F] (multi-head: yes rom: no post: no) EXT3 FS on dm-3, internal journal audit(1166136754.227:5): avc: denied { read } for pid=2689 comm="mount" name="sda1" dev=tmpfs ino=3354 scontext=system_u:system_r:mount_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=blk_file audit(1166136754.227:6): avc: denied { getattr } for pid=2689 comm="mount" name="sda1" dev=tmpfs ino=3354 scontext=system_u:system_r:mount_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=blk_file SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda1, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on dm-5, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev dm-5, type ext3), uses xattr audit(1166136754.403:7): avc: denied { getattr } for pid=2739 comm="pam_console_app" name="hda" dev=tmpfs ino=3522 scontext=system_u:system_r:pam_console_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=blk_file audit(1166136754.403:8): avc: denied { setattr } for pid=2739 comm="pam_console_app" name="hda" dev=tmpfs ino=3522 scontext=system_u:system_r:pam_console_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=blk_file Adding 978420k swap on /dev/mapper/crypt2. Priority:-1 extents:1 across:978420k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 b44: eth0: Link is up at 100 Mbps, full duplex. b44: eth0: Flow control is off for TX and off for RX.