| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 19 Dec 2006 01:12:07 +0100
From: "Markus Rechberger" <mrechberger@...il.com>
To: linux-kernel@...r.kernel.org
Subject: Re: [solved] Yenta Cardbus allocation failure
I went on with investigating that problem and found the problem,
though I'm not sure if that solution is acceptable..
seems like the memory range gets preallocated in setup-bus.c, and
CARDBUS_MEM_SIZE defines that size.
I changed
#define CARDBUS_MEM_SIZE (32*1024*1024)
to
#define CARDBUS_MEM_SIZE (48*1024*1024)
and now the system is able to allocate the resources for the 3rd
pci/pcmcia function.
Can anyone please have a closer look at it too? I think the whole
implementation isn't really good there..
so this is the new output of iomem:
$ cat /proc/iomem
...
30000000-35ffffff : PCI Bus #02
30000000-32ffffff : PCI CardBus #03
36000000-360003ff : 0000:00:1f.1
39000000-3bffffff : PCI CardBus #03
39000000-39ffffff : 0000:03:00.0
3a000000-3affffff : 0000:03:00.1
3b000000-3bffffff : 0000:03:00.2 <- this one failed to allocate previously
3c000000-3effffff : PCI CardBus #07
41000000-43ffffff : PCI CardBus #07
...
and lspci:
$ lspci -vvv
03:00.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video
and Audio Decoder (rev 05)
Subsystem: Yuan Yuan Enterprise Co., Ltd. Unknown device 1788
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 39000000 (32-bit, non-prefetchable)
[disabled] [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:00.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder [Audio Port] (rev 05)
Subsystem: Yuan Yuan Enterprise Co., Ltd. Unknown device 1788
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 3a000000 (32-bit, non-prefetchable)
[disabled] [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:00.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder [MPEG Port] (rev 05)
Subsystem: Yuan Yuan Enterprise Co., Ltd. Unknown device 1788
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
NEW --> Region 0: Memory at 3b000000 (32-bit, non-prefetchable)
[disabled] [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
thanks,
Markus
On 12/12/06, Markus Rechberger <mrechberger@...il.com> wrote:
> Hi,
>
> I've got a PCMCIA Hybrid TV tuner, but when I plug it in it fails to
> allocate resources for the 3rd PCI function.
> I already searched with google and someone implemented an otion
>
> parm: override_bios:yenta ignore bios resource allocation (uint
>
> in yenta_socket, though this doesn't seem to work out with that device.
>
> Any idea how that problem can be solved?
>
> So here are some logs
>
> lspci:
> 0000:03:00.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI
> Video and Audio Decoder (rev 05)
> Subsystem: Yuan Yuan Enterprise Co., Ltd.: Unknown device 1788
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR+
> Latency: 64 (5000ns min, 13750ns max)
> Interrupt: pin A routed to IRQ 10
> Region 0: Memory at 36000000 (32-bit, non-prefetchable) [size=16M]
> Capabilities: [44] Vital Product Data
> Capabilities: [4c] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0000:03:00.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video
> and Audio Decoder [Audio Port] (rev 05)
> Subsystem: Yuan Yuan Enterprise Co., Ltd.: Unknown device 1788
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (1000ns min, 63750ns max)
> Interrupt: pin A routed to IRQ 10
> Region 0: Memory at 37000000 (32-bit, non-prefetchable) [size=16M]
> Capabilities: [4c] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0000:03:00.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video
> and Audio Decoder [MPEG Port] (rev 05)
> Subsystem: Yuan Yuan Enterprise Co., Ltd.: Unknown device 1788
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin A routed to IRQ 10
> Capabilities: [4c] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>
> cat /proc/iomem
> 00000000-0009f7ff : System RAM
> 0009f800-0009ffff : reserved
> 000a0000-000bffff : Video RAM area
> 000c0000-000ccdff : Video ROM
> 000cd000-000ce7ff : Adapter ROM
> 000f0000-000fffff : System ROM
> 00100000-1dedffff : System RAM
> 00100000-002ada17 : Kernel code
> 002ada18-0037ebc7 : Kernel data
> 1dee0000-1deebfff : ACPI Tables
> 1deec000-1defffff : ACPI Non-volatile Storage
> 1df00000-1fffffff : reserved
> 30000000-33ffffff : PCI Bus #02
> 30000000-31ffffff : PCI CardBus #03
> 32000000-33ffffff : PCI CardBus #07
> 34000000-340003ff : 0000:00:1f.1
> 36000000-37ffffff : PCI CardBus #03
> 36000000-36ffffff : 0000:03:00.0
> 36000000-36ffffff : cx88[0]
> 37000000-37ffffff : 0000:03:00.1
> 37000000-37ffffff : cx88[0]
> 38000000-39ffffff : PCI CardBus #07
> e0000000-e007ffff : 0000:00:02.0
> e0080000-e00fffff : 0000:00:02.1
> e0100000-e01003ff : 0000:00:1d.7
> e0100000-e01003ff : ehci_hcd
> e0100800-e01008ff : 0000:00:1f.5
> e0100800-e01008ff : Intel 82801DB-ICH4
> e0100c00-e0100dff : 0000:00:1f.5
> e0100c00-e0100dff : Intel 82801DB-ICH4
> e0200000-e07fffff : PCI Bus #02
> e0200000-e0203fff : 0000:02:07.0
> e0204000-e0205fff : 0000:02:02.0
> e0204000-e0205fff : b44
> e0206000-e0206fff : 0000:02:04.0
> e0206000-e0206fff : ipw2100
> e0207000-e0207fff : 0000:02:06.0
> e0207000-e0207fff : yenta_socket
> e0208000-e0208fff : 0000:02:06.1
> e0208000-e0208fff : yenta_socket
> e0209000-e02097ff : 0000:02:07.0
> e0209000-e02097ff : ohci1394
> e0260000-e0260fff : pcmcia_socket1
> e8000000-efffffff : 0000:00:02.0
> f0000000-f7ffffff : 0000:00:02.1
> fec10000-fec1ffff : reserved
> ff800000-ffbfffff : reserved
> fffffc00-ffffffff : reserved
>
>
>
> dmesg:
> Yenta: CardBus bridge found at 0000:02:06.0 [1025:0035]
> Yenta O2: res at 0x94/0xD4: 00/ea
> Yenta O2: enabling read prefetch/write burst
> Yenta: ISA IRQ mask 0x00b8, PCI irq 10
> Socket status: 30000820
> Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
> pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
> cs: IO port probe 0x3000-0x3fff: clean.
> pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe07fffff
> pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
> Yenta: CardBus bridge found at 0000:02:06.1 [1025:0035]
> Yenta: ISA IRQ mask 0x00b8, PCI irq 10
> Socket status: 30000410
> Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a
> pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
> cs: IO port probe 0x3000-0x3fff: clean.
> pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe07fffff
> pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
> pccard: CardBus card inserted into slot 0
> PCI: Failed to allocate mem resource #0:1000000@...00000 for 0000:03:00.2
>
>
> thanks,
> Markus
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists