linux-kernel - Re: Linux disk performance.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:	Sun, 31 Dec 2006 20:59:01 -0500
From:	Bill Davidsen <davidsen@....com>
To:	Phillip Susi <psusi@....rr.com>
CC:	Manish Regmi <regmi.manish@...il.com>,
	linux-kernel@...r.kernel.org, kernelnewbies@...linux.org
Subject: Re: Linux disk performance.

Phillip Susi wrote:
> Bill Davidsen wrote:
>> Quite honestly, the main place I have found O_DIRECT useful is in 
>> keeping programs doing large i/o quantities from blowing the buffers 
>> and making the other applications run like crap. If you application is 
>> running alone, unless you are very short of CPU or memory avoiding the 
>> copy to an o/s buffer will be down in the measurement noise.
>>
>> I had a news (usenet) server which normally did 120 art/sec (~480 
>> tps), which dropped to about 50 tps when doing large file copies even 
>> at low priority. By using O_DIRECT the impact essentially vanished, at 
>> the cost of the copy running about 10-15% slower. Changing various 
>> programs to use O_DIRECT only helped when really large blocks of data 
>> were involved, and only when i/o clould be done in a way to satisfy 
>> the alignment and size requirements of O_DIRECT.
>>
>> If you upgrade to a newer kernel you can try other i/o scheduler 
>> options, default cfq or even deadline might be helpful.
> 
> I would point out that if you are looking for optimal throughput and 
> reduced cpu overhead, and avoid blowing out the kernel fs cache, you 
> need to couple aio with O_DIRECT.  By itself O_DIRECT will lower 
> throughput because there will be brief pauses between each IO while the 
> application prepares the next buffer.  You can overcome this by posting 
> a few pending buffers concurrently with aio, allowing the kernel to 
> always have a buffer ready for the next io as soon as the previous one 
> completes.

A good point, but in this case there was no particular urgency, other 
than not to stop the application while doing background data moves. The 
best way to do it would have been to put it where it belonged in the 
first place :-(

-- 
bill davidsen <davidsen@....com>
   CTO TMR Associates, Inc
   Doing interesting things with small computers since 1979
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/