linux-kernel - Re: JMicron JMB363 SATA hard disk appears twice (sda + hdg)

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Sat, 6 Jan 2007 19:22:42 +0000
From:	Alan <alan@...rguk.ukuu.org.uk>
To:	Giuseppe Bilotta <bilotta78@...pop.com>
Cc:	linux-kernel@...r.kernel.org
Subject: Re: JMicron JMB363 SATA hard disk appears twice (sda + hdg)

> The BIOS is set to use the SATA controllers in AHCI mode, not IDE.
> However, the hard disk appears twice, first as hdg, then as sda.
> Passing ide2=noprobe ide3=noprobe as boot parameters to the kernel
> doesn't seem to have any effect:

You have both the drivers for the Jmicron via drivers/ide and via
drivers/ata (libata) loaded. In that specific combination the two drivers
don't use the same resources so don't spot the other one is busy.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/