Date:	Thu, 22 Feb 2007 17:11:18 -0800
From:	Venkatesh Pallipadi <venkatesh.pallipadi@...el.com>
To:	linux-kernel <linux-kernel@...r.kernel.org>,
	Ingo Molnar <mingo@...hat.com>,
	Thomas Gleixner <tglx@...utronix.de>
Subject: [PATCH 4/5] RT kernel: HPET emulate RTC and other cleanups



Cleanup HPET RTC emulation based on earlier patch which uses HPET interrupts
in normal mode instead of legacy replacement mode. RTC can now coexist with
HPET.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@...el.com>

Index: linux-2.6.21-rc-mm/arch/x86_64/Kconfig
===================================================================
--- linux-2.6.21-rc-mm.orig/arch/x86_64/Kconfig
+++ linux-2.6.21-rc-mm/arch/x86_64/Kconfig
@@ -448,6 +448,7 @@ config ARCH_ENABLE_MEMORY_HOTPLUG
 config HPET_TIMER
 	bool
 	default y
+	depends ACPI
 	help
 	  Use the IA-PC HPET (High Precision Event Timer) to manage
 	  time in preference to the PIT and RTC, if a HPET is
@@ -458,7 +459,7 @@ config HPET_TIMER
 
 config HPET_EMULATE_RTC
 	bool "Provide RTC interrupt"
-	depends on HPET_TIMER && RTC=y
+	depends on HPET_TIMER && RTC=y && !GENERIC_TIME
 
 # Mark as embedded because too many people got it wrong.
 # The code disables itself when not needed.
Index: linux-2.6.21-rc-mm/arch/x86_64/kernel/hpet.c
===================================================================
--- linux-2.6.21-rc-mm.orig/arch/x86_64/kernel/hpet.c
+++ linux-2.6.21-rc-mm/arch/x86_64/kernel/hpet.c
@@ -2,7 +2,6 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/init.h>
-#include <linux/mc146818rtc.h>
 #include <linux/time.h>
 #include <linux/clocksource.h>
 #include <linux/ioport.h>
@@ -10,6 +9,8 @@
 #include <linux/hpet.h>
 #include <linux/clockchips.h>
 #include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
 
 #include <asm/pgtable.h>
 #include <asm/vsyscall.h>
@@ -44,36 +45,35 @@ static __init int late_hpet_init(void)
 
 	/*
 	 * Register with driver.
-	 * Timer0 and Timer1 is used by platform.
+	 * num_timers_used timers are used by platform.
 	 */
 	hd.hd_phys_address = hpet_address;
 	hd.hd_address = (void __iomem *)fix_to_virt(FIX_HPET_BASE);
 	hd.hd_nirqs = ntimer;
 	hd.hd_flags = HPET_DATA_PLATFORM;
-	hpet_reserve_timer(&hd, 0);
-#ifdef	CONFIG_HPET_EMULATE_RTC
-	hpet_reserve_timer(&hd, 1);
-#endif
-	hd.hd_irq[0] = HPET_LEGACY_8254;
-	hd.hd_irq[1] = HPET_LEGACY_RTC;
-	if (ntimer > 2) {
+
+	for (i = 0; i < num_timers_used; i++) {
+		hpet_reserve_timer(&hd, i);
+	}
+
+	if (ntimer > num_timers_used) {
 		struct hpet		*hpet;
 		struct hpet_timer	*timer;
 		int			i;
 
 		hpet = (struct hpet *) fix_to_virt(FIX_HPET_BASE);
-		timer = &hpet->hpet_timers[2];
-		for (i = 2; i < ntimer; timer++, i++)
+		for (i = num_timers_used; i < ntimer; timer++, i++) {
+			timer = &hpet->hpet_timers[i];
 			hd.hd_irq[i] = (timer->hpet_config &
 					Tn_INT_ROUTE_CNF_MASK) >>
 				Tn_INT_ROUTE_CNF_SHIFT;
-
+		}
 	}
 
 	hpet_alloc(&hd);
 	return 0;
 }
-fs_initcall(late_hpet_init);
+late_initcall(late_hpet_init);
 #endif
 
 static int hpet_timer_stop_set_go(unsigned long tick)
@@ -209,257 +209,6 @@ unsigned int __init hpet_calibrate_tsc(v
 		/ ((hpet_now - hpet_start) * hpet_period / 1000);
 }
 
-#ifdef CONFIG_HPET_EMULATE_RTC
-/* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET
- * is enabled, we support RTC interrupt functionality in software.
- * RTC has 3 kinds of interrupts:
- * 1) Update Interrupt - generate an interrupt, every sec, when RTC clock
- *    is updated
- * 2) Alarm Interrupt - generate an interrupt at a specific time of day
- * 3) Periodic Interrupt - generate periodic interrupt, with frequencies
- *    2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2)
- * (1) and (2) above are implemented using polling at a frequency of
- * 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt
- * overhead. (DEFAULT_RTC_INT_FREQ)
- * For (3), we use interrupts at 64Hz or user specified periodic
- * frequency, whichever is higher.
- */
-#include <linux/rtc.h>
-
-#define DEFAULT_RTC_INT_FREQ 	64
-#define RTC_NUM_INTS 		1
-
-static unsigned long UIE_on;
-static unsigned long prev_update_sec;
-
-static unsigned long AIE_on;
-static struct rtc_time alarm_time;
-
-static unsigned long PIE_on;
-static unsigned long PIE_freq = DEFAULT_RTC_INT_FREQ;
-static unsigned long PIE_count;
-
-static unsigned long hpet_rtc_int_freq; /* RTC interrupt frequency */
-static unsigned int hpet_t1_cmp; /* cached comparator register */
-
-int is_hpet_enabled(void)
-{
-	return hpet_address != 0;
-}
-
-/*
- * Timer 1 for RTC, we do not use periodic interrupt feature,
- * even if HPET supports periodic interrupts on Timer 1.
- * The reason being, to set up a periodic interrupt in HPET, we need to
- * stop the main counter. And if we do that everytime someone diables/enables
- * RTC, we will have adverse effect on main kernel timer running on Timer 0.
- * So, for the time being, simulate the periodic interrupt in software.
- *
- * hpet_rtc_timer_init() is called for the first time and during subsequent
- * interuppts reinit happens through hpet_rtc_timer_reinit().
- */
-int hpet_rtc_timer_init(void)
-{
-	unsigned int cfg, cnt;
-	unsigned long flags;
-
-	if (!is_hpet_enabled())
-		return 0;
-	/*
-	 * Set the counter 1 and enable the interrupts.
-	 */
-	if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ))
-		hpet_rtc_int_freq = PIE_freq;
-	else
-		hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ;
-
-	local_irq_save(flags);
-
-	cnt = hpet_readl(HPET_COUNTER);
-	cnt += ((hpet_tick*HZ)/hpet_rtc_int_freq);
-	hpet_writel(cnt, HPET_T1_CMP);
-	hpet_t1_cmp = cnt;
-
-	cfg = hpet_readl(HPET_T1_CFG);
-	cfg &= ~HPET_TN_PERIODIC;
-	cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
-	hpet_writel(cfg, HPET_T1_CFG);
-
-	local_irq_restore(flags);
-
-	return 1;
-}
-
-static void hpet_rtc_timer_reinit(void)
-{
-	unsigned int cfg, cnt, ticks_per_int, lost_ints;
-
-	if (unlikely(!(PIE_on | AIE_on | UIE_on))) {
-		cfg = hpet_readl(HPET_T1_CFG);
-		cfg &= ~HPET_TN_ENABLE;
-		hpet_writel(cfg, HPET_T1_CFG);
-		return;
-	}
-
-	if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ))
-		hpet_rtc_int_freq = PIE_freq;
-	else
-		hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ;
-
-	/* It is more accurate to use the comparator value than current count.*/
-	ticks_per_int = hpet_tick * HZ / hpet_rtc_int_freq;
-	hpet_t1_cmp += ticks_per_int;
-	hpet_writel(hpet_t1_cmp, HPET_T1_CMP);
-
-	/*
-	 * If the interrupt handler was delayed too long, the write above tries
-	 * to schedule the next interrupt in the past and the hardware would
-	 * not interrupt until the counter had wrapped around.
-	 * So we have to check that the comparator wasn't set to a past time.
-	 */
-	cnt = hpet_readl(HPET_COUNTER);
-	if (unlikely((int)(cnt - hpet_t1_cmp) > 0)) {
-		lost_ints = (cnt - hpet_t1_cmp) / ticks_per_int + 1;
-		/* Make sure that, even with the time needed to execute
-		 * this code, the next scheduled interrupt has been moved
-		 * back to the future: */
-		lost_ints++;
-
-		hpet_t1_cmp += lost_ints * ticks_per_int;
-		hpet_writel(hpet_t1_cmp, HPET_T1_CMP);
-
-		if (PIE_on)
-			PIE_count += lost_ints;
-
-		if (printk_ratelimit())
-			printk(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n",
-			       hpet_rtc_int_freq);
-	}
-}
-
-/*
- * The functions below are called from rtc driver.
- * Return 0 if HPET is not being used.
- * Otherwise do the necessary changes and return 1.
- */
-int hpet_mask_rtc_irq_bit(unsigned long bit_mask)
-{
-	if (!is_hpet_enabled())
-		return 0;
-
-	if (bit_mask & RTC_UIE)
-		UIE_on = 0;
-	if (bit_mask & RTC_PIE)
-		PIE_on = 0;
-	if (bit_mask & RTC_AIE)
-		AIE_on = 0;
-
-	return 1;
-}
-
-int hpet_set_rtc_irq_bit(unsigned long bit_mask)
-{
-	int timer_init_reqd = 0;
-
-	if (!is_hpet_enabled())
-		return 0;
-
-	if (!(PIE_on | AIE_on | UIE_on))
-		timer_init_reqd = 1;
-
-	if (bit_mask & RTC_UIE) {
-		UIE_on = 1;
-	}
-	if (bit_mask & RTC_PIE) {
-		PIE_on = 1;
-		PIE_count = 0;
-	}
-	if (bit_mask & RTC_AIE) {
-		AIE_on = 1;
-	}
-
-	if (timer_init_reqd)
-		hpet_rtc_timer_init();
-
-	return 1;
-}
-
-int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec)
-{
-	if (!is_hpet_enabled())
-		return 0;
-
-	alarm_time.tm_hour = hrs;
-	alarm_time.tm_min = min;
-	alarm_time.tm_sec = sec;
-
-	return 1;
-}
-
-int hpet_set_periodic_freq(unsigned long freq)
-{
-	if (!is_hpet_enabled())
-		return 0;
-
-	PIE_freq = freq;
-	PIE_count = 0;
-
-	return 1;
-}
-
-int hpet_rtc_dropped_irq(void)
-{
-	if (!is_hpet_enabled())
-		return 0;
-
-	return 1;
-}
-
-irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
-{
-	struct rtc_time curr_time;
-	unsigned long rtc_int_flag = 0;
-	int call_rtc_interrupt = 0;
-
-	hpet_rtc_timer_reinit();
-
-	if (UIE_on | AIE_on) {
-		rtc_get_rtc_time(&curr_time);
-	}
-	if (UIE_on) {
-		if (curr_time.tm_sec != prev_update_sec) {
-			/* Set update int info, call real rtc int routine */
-			call_rtc_interrupt = 1;
-			rtc_int_flag = RTC_UF;
-			prev_update_sec = curr_time.tm_sec;
-		}
-	}
-	if (PIE_on) {
-		PIE_count++;
-		if (PIE_count >= hpet_rtc_int_freq/PIE_freq) {
-			/* Set periodic int info, call real rtc int routine */
-			call_rtc_interrupt = 1;
-			rtc_int_flag |= RTC_PF;
-			PIE_count = 0;
-		}
-	}
-	if (AIE_on) {
-		if ((curr_time.tm_sec == alarm_time.tm_sec) &&
-		    (curr_time.tm_min == alarm_time.tm_min) &&
-		    (curr_time.tm_hour == alarm_time.tm_hour)) {
-			/* Set alarm int info, call real rtc int routine */
-			call_rtc_interrupt = 1;
-			rtc_int_flag |= RTC_AF;
-		}
-	}
-	if (call_rtc_interrupt) {
-		rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8));
-		rtc_interrupt(rtc_int_flag, dev_id);
-	}
-	return IRQ_HANDLED;
-}
-#endif
-
 static int __init nohpet_setup(char *s)
 {
 	nohpet = 1;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists