Linux version 2.6.20-245-xavier (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Feb 26 15:00:17 CST 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000d0000 size: 0000000000008000 end: 00000000000d8000 type: 2 copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000001be70000 end: 000000001bf70000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000001bf70000 size: 000000000000b000 end: 000000001bf7b000 type: 3 copy_e820_map() start: 000000001bf7b000 size: 0000000000005000 end: 000000001bf80000 type: 4 copy_e820_map() start: 000000001bf80000 size: 0000000000080000 end: 000000001c000000 type: 2 copy_e820_map() start: 000000002bf80000 size: 0000000000080000 end: 000000002c000000 type: 2 copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2 copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001bf70000 (usable) BIOS-e820: 000000001bf70000 - 000000001bf7b000 (ACPI data) BIOS-e820: 000000001bf7b000 - 000000001bf80000 (ACPI NVS) BIOS-e820: 000000001bf80000 - 000000001c000000 (reserved) BIOS-e820: 000000002bf80000 - 000000002c000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Malformed early option 'acpi' 0MB HIGHMEM available. 447MB LOWMEM available. found SMP MP-table at 000f6ae0 Entering add_active_range(0, 0, 114544) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 114544 HighMem 114544 -> 114544 early_node_map[1] active PFN ranges 0: 0 -> 114544 On node 0 totalpages: 114544 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 862 pages used for memmap Normal zone: 109586 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f6b40 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1bf75dd2 ACPI: FADT (v001 TOSCPL Chinook 0x06040000 ATI 0x00000003) @ 0x1bf7af24 ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x1bf7af98 ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x1bf75e02 ACPI: DSDT (v001 TOSCPL SB200 0x06040000 MSFT 0x0100000e) @ 0x00000000 ATI board detected. Disabling timer routing over 8254. ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: Skipping IOAPIC probe due to 'noapic' option. Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: Product ID: RS300 Board APIC at: 0xFEE00000 I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Allocating PCI resources starting at 30000000 (gap: 2c000000:d2c00000) Detected 3067.607 MHz processor. Built 1 zonelists. Total pages: 113650 Kernel command line: root=/dev/hda3 vga=0x317 resume=/dev/hda2 splash=silent splash=verbose noapic enable_8254_timer enable_timer_pin_1 debug apic=debug acpi=debug bootsplash: silent mode. bootsplash: verbose mode. mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 447488k/458176k available (1696k kernel code, 10144k reserved, 659k data, 180k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff9b000 - 0xfffff000 ( 400 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB) lowmem : 0xc0000000 - 0xdbf70000 ( 447 MB) .init : 0xc0354000 - 0xc0381000 ( 180 kB) .data : 0xc02a81db - 0xc034d054 ( 659 kB) .text : 0xc0100000 - 0xc02a81db (1696 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 6138.97 BogoMIPS (lpj=3069488) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00003180 0000459d 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Early unpacking initramfs... done ACPI: Core revision 20060707 ACPI: successfully read 16816 bytes from file /DSDT.aml ACPI: Override [DSDT- SB200] from initramfs - tainting kernel ACPI (tbget-0297): Table [DSDT] replaced by host OS [20060707] ACPI: setting ELCR to 0200 (from 0800) CPU0: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 01 Getting VERSION: 50014 Getting VERSION: 50014 Getting ID: 0 Getting LVT0: 700 Getting LVT1: 400 enabled ExtINT on CPU#0 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 masked ExtINT on CPU#1 Calibrating delay using timer specific routine.. 6132.71 BogoMIPS (lpj=3066357) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00003180 0000459d 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (12) available CPU1: Thermal monitoring enabled CPU1: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 01 Total of 2 processors activated (12271.69 BogoMIPS). Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 3066.0345 MHz. ..... host bus clock speed is 133.0319 MHz. checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=153 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd958, last bus=2 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:05.0 PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNK0] (IRQs 10 *11) ACPI: PCI Interrupt Link [LNK1] (IRQs 10 *11) ACPI: PCI Interrupt Link [LNK2] (IRQs 10 *11) ACPI: PCI Interrupt Link [LNK3] (IRQs 10 *11) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 9 devices PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:07: ioport range 0x1080-0x1080 has been reserved pnp: 00:07: ioport range 0x220-0x22f has been reserved pnp: 00:07: ioport range 0x40b-0x40b has been reserved pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved PCI: Bridge: 0000:00:01.0 IO window: 9000-9fff MEM window: e8100000-e81fffff PREFETCH window: f0000000-f7ffffff PCI: Bus 3, cardbus bridge: 0000:02:04.0 IO window: 0000a400-0000a4ff IO window: 0000a800-0000a8ff PREFETCH window: 30000000-33ffffff MEM window: 34000000-37ffffff PCI: Bridge: 0000:00:14.4 IO window: a000-afff MEM window: e8200000-e82fffff PREFETCH window: 30000000-33ffffff ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNK0] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered Unpacking initramfs... done Freeing initrd memory: 3137k freed Machine check exception polling timer started. apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1172843704.198:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) ACPI Error (evregion-0317): No handler for Region [ECR_] (db73bbb4) [EmbeddedControl] [20060707] ACPI Error (exfldio-0290): Region EmbeddedControl(3) has no handler [20060707] ACPI Exception (dswexec-0458): AE_NOT_EXIST, While resolving operands for [OpcodeName unavailable] [20060707] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.EPWR.PCLK] (Node db73ac48), AE_NOT_EXIST ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.EC0_._Q1E] (Node db7448ec), AE_NOT_EXIST vesafb: framebuffer at 0xf0000000, mapped to 0xdc880000, using 6144k, total 65536k vesafb: mode is 1024x768x16, linelength=2048, pages=41 vesafb: protected mode interface info at c000:52d0 vesafb: pmi: set display start = c00c533e, set palette = c00c5378 vesafb: pmi: ports = 9010 9016 9054 9038 903c 905c 9000 9004 90b0 90b2 90b4 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 81749 bytes,<6>...found (1024x768, 46202 bytes, v3). Console: switching to colour frame buffer device 124x44 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt for device 0000:00:14.6 disabled floppy0: no floppy controllers found PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 NET: Registered protocol family 1 Using IPI No-Shortcut mode ACPI: (supports S0 S3 S4 S5) Time: tsc clocksource has been installed. Freeing unused kernel memory: 180k freed input: PS/2 Mouse as /class/input/input1 input: AlpsPS/2 ALPS GlidePoint as /class/input/input2 input: AT Translated Set 2 keyboard as /class/input/input3 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ATIIXP: IDE controller at PCI slot 0000:00:14.1 ACPI: PCI Interrupt 0000:00:14.1[A] -> Link [LNK0] -> GSI 11 (level, low) -> IRQ 11 ATIIXP: chipset revision 0 ATIIXP: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x8070-0x8077, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x8078-0x807f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: IC25N060ATMR04-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 512KiB hda: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 > Probing IDE interface ide1... hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4243N, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707] ACPI: Processor [CPU0] (supports 8 throttling states) ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707] ACPI: Processor [CPU1] (supports 8 throttling states) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. lp: driver loaded but no devices found ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11 ALSA sound/pci/atiixp_modem.c:503: atiixp-modem: codec reset timeout Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected Ati IGP9100/M chipset agpgart: AGP aperture is 32M @ 0xea000000 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: PCI Interrupt 0000:00:14.5[B] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:13.0: irq 11, io mem 0xe8001000 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: OHCI Host Controller usb usb1: Manufacturer: Linux 2.6.20-245-xavier ohci_hcd usb usb1: SerialNumber: 0000:00:13.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.1: irq 11, io mem 0xe8002000 8139too Fast Ethernet driver 0.9.28 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.20-245-xavier ohci_hcd usb usb2: SerialNumber: 0000:00:13.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: PCI Interrupt 0000:00:13.2[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:13.2: irq 11, io mem 0xe8003000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: EHCI Host Controller usb usb3: Manufacturer: Linux 2.6.20-245-xavier ehci_hcd usb usb3: SerialNumber: 0000:00:13.2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected usb 1-1: new low speed USB device using ohci_hcd and address 2 Yenta: CardBus bridge found at 0000:02:04.0 [1179:ff00] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:04.0, mfunc 0x00111c12, devctl 0x44 Yenta: ISA IRQ mask 0x04f0, PCI irq 11 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe82fffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11 eth0: RealTek RTL8139 at 0xdd0c2000, 00:0f:b0:54:f3:17, IRQ 11 eth0: Identified 8139 chip type 'RTL-8100B/8139D' usb 1-1: new low speed USB device using ohci_hcd and address 3 usb 1-1: new device found, idVendor=09da, idProduct=0006 usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: USB Optical Mouse usb 1-1: Manufacturer: A4Tech usb 1-1: configuration #1 chosen from 1 choice Adding 722916k swap on /dev/hda2. Priority:-1 extents:1 across:722916k Adding 208804k swap on /dev/hda9. Priority:-2 extents:1 across:208804k usbcore: registered new interface driver hiddev input: A4Tech USB Optical Mouse as /class/input/input4 input: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:13.0-1 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver omnibook: Driver version 2.20060921-trunk. omnibook: Toshiba Satellite A70 detected. omnibook: Begin table match of blank feature. omnibook: Try to init cdimode omnibook: Fail to find a supported LPC I/O bridge, please report omnibook: Backend compal init failed, skipping entry. omnibook: Returning table entry nr 1. omnibook: LCD backlight turn off at console blanking is enabled. omnibook: Begin table match of bluetooth feature. omnibook: Try to init ACPI backend omnibook: ACPI EC device found omnibook: ACPI backend init OK omnibook: Returning table entry nr 0. omnibook: get_wireless raw_state: 5 omnibook: Begin table match of cooling feature. omnibook: CDI backend init already failed, skipping. omnibook: Backend compal init failed, skipping entry. omnibook: Match failed: disabling cooling. omnibook: Begin table match of display feature. omnibook: ACPI backend has already been initialized omnibook: Returning table entry nr 0. omnibook: Begin table match of hotkeys feature. omnibook: CDI backend init already failed, skipping. omnibook: Backend compal init failed, skipping entry. omnibook: Match failed: disabling hotkeys. omnibook: version feature has no backend table, io_op not initialized. omnibook: dmi feature has no backend table, io_op not initialized. omnibook: Begin table match of lcd feature. omnibook: CDI backend init already failed, skipping. omnibook: Backend compal init failed, skipping entry. omnibook: Returning table entry nr 2. omnibook: Begin table match of temperature feature. omnibook: Returning table entry nr 0. omnibook: Begin table match of touchpad feature. omnibook: CDI backend init already failed, skipping. omnibook: Backend compal init failed, skipping entry. omnibook: Match failed: disabling touchpad. omnibook: Begin table match of wifi feature. omnibook: ACPI backend has already been initialized omnibook: Returning table entry nr 0. omnibook: get_wireless raw_state: 5 omnibook: Begin table match of throttling feature. omnibook: ACPI backend has already been initialized omnibook: Returning table entry nr 0. omnibook: Enabled features: blank bluetooth display version dmi lcd temperature wifi throttling. device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com loop: loaded (max 8 devices) NTFS driver 2.1.28 [Flags: R/W MODULE]. NTFS volume version 3.1. ReiserFS: hda5: found reiserfs format "3.6" with standard journal ReiserFS: hda5: using ordered data mode reiserfs: using flush barriers ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda5: checking transaction log (hda5) ReiserFS: hda5: Using r5 hash to sort names ReiserFS: hda7: found reiserfs format "3.6" with standard journal ReiserFS: hda7: using ordered data mode reiserfs: using flush barriers ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda7: checking transaction log (hda7) ReiserFS: hda7: Using r5 hash to sort names kjournald starting. Commit interval 5 seconds EXT3 FS on hda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. AppArmor: AppArmor initialized audit(1172843763.990:2): AppArmor initialized ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) input: Power Button (FF) as /class/input/input5 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input6 ACPI: Lid Switch [LID] input: Power Button (CM) as /class/input/input7 ACPI: Power Button (CM) [PWRB] IA-32 Microcode Update Driver: v1.14a audit(1172865382.456:3): audit_pid=3040 old=0 by auid=4294967295 NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 NET: Registered protocol family 17 [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNK0] -> GSI 11 (level, low) -> IRQ 11 [drm] Initialized radeon 1.25.0 20060524 on minor 0 agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:05.0 into 8x mode [drm] Setting GART location based on old memory map [drm] Loading R200 Microcode [drm] writeback test succeeded in 1 usecs eth0: no IPv6 routers present NET: Registered protocol family 4 NET: Registered protocol family 3 NET: Registered protocol family 5 ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A eth0: link down usb 1-1: USB disconnect, address 3 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present eth0: link down eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready usb 1-1: new low speed USB device using ohci_hcd and address 4 usb 1-1: new device found, idVendor=09da, idProduct=0006 usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: USB Optical Mouse usb 1-1: Manufacturer: A4Tech usb 1-1: configuration #1 chosen from 1 choice input: A4Tech USB Optical Mouse as /class/input/input8 input: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:13.0-1 eth0: no IPv6 routers present atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 ' to make it known. atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0). atkbd.c: Use 'setkeycodes e059 ' to make it known. usb 1-1: USB disconnect, address 4 eth0: link down usb 1-1: new low speed USB device using ohci_hcd and address 5 usb 1-1: new device found, idVendor=09da, idProduct=0006 usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: USB Optical Mouse usb 1-1: Manufacturer: A4Tech usb 1-1: configuration #1 chosen from 1 choice input: A4Tech USB Optical Mouse as /class/input/input9 input: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:13.0-1 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present eth0: no IPv6 routers present