Linux version 2.6.20-1.2307b (root@m77.limsi.fr) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 SMP Mon Apr 2 18:43:02 CEST 2007 Command line: ro root=LABEL=/ rhgb quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009a000 (usable) BIOS-e820: 000000000009a000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bffcbac0 (usable) BIOS-e820: 00000000bffcbac0 - 00000000bffcee80 (ACPI data) BIOS-e820: 00000000bffcee80 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000240000000 (usable) Entering add_active_range(0, 0, 154) 0 entries of 3200 used Entering add_active_range(0, 256, 786379) 1 entries of 3200 used Entering add_active_range(0, 1048576, 2359296) 2 entries of 3200 used end_pfn_map = 2359296 DMI 2.4 present. ACPI: RSDP (v002 IBM ) @ 0x00000000000fdfd0 ACPI: XSDT (v001 IBM SERDEFNT 0x00001000 IBM 0x45444f43) @ 0x00000000bffced80 ACPI: FADT (v002 IBM SERDEFNT 0x00001000 IBM 0x45444f43) @ 0x00000000bffcecc0 ACPI: MADT (v001 IBM SERDEFNT 0x00001000 IBM 0x45444f43) @ 0x00000000bffcec00 ACPI: SRAT (v001 IBM SERDEFNT 0x00001000 IBM 0x45444f43) @ 0x00000000bffceac0 ACPI: HPET (v001 IBM SERDEFNT 0x00001000 IBM 0x45444f43) @ 0x00000000bffcea80 ACPI: MCFG (v001 IBM SERDEFNT 0x00001000 IBM 0x45444f43) @ 0x00000000bffcea40 ACPI: DSDT (v002 IBM SERDEFNT 0x00001000 INTL 0x20041203) @ 0x0000000000000000 SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: PXM 0 -> APIC 6 -> Node 0 SRAT: PXM 0 -> APIC 7 -> Node 0 SRAT: Node 0 PXM 0 0-c0000000 Entering add_active_range(0, 0, 154) 0 entries of 3200 used Entering add_active_range(0, 256, 786379) 1 entries of 3200 used SRAT: Node 0 PXM 0 0-240000000 Entering add_active_range(0, 0, 154) 2 entries of 3200 used Entering add_active_range(0, 256, 786379) 2 entries of 3200 used Entering add_active_range(0, 1048576, 2359296) 2 entries of 3200 used NUMA: Using 63 for the hash shift. Bootmem setup node 0 0000000000000000-0000000240000000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 2359296 early_node_map[3] active PFN ranges 0: 0 -> 154 0: 256 -> 786379 0: 1048576 -> 2359296 On node 0 totalpages: 2096997 DMA zone: 64 pages used for memmap DMA zone: 1250 pages reserved DMA zone: 2680 pages, LIFO batch:0 DMA32 zone: 16320 pages used for memmap DMA32 zone: 765963 pages, LIFO batch:31 Normal zone: 20480 pages used for memmap Normal zone: 1290240 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x588 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) Processor #6 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) Processor #7 ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 14, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x0d] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 13, address 0xfec80000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to physical flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009a000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000e0000 Nosave address range: 00000000000e0000 - 0000000000100000 Nosave address range: 00000000bffcb000 - 00000000bffcc000 Nosave address range: 00000000bffcc000 - 00000000bffce000 Nosave address range: 00000000bffce000 - 00000000bffcf000 Nosave address range: 00000000bffcf000 - 00000000c0000000 Nosave address range: 00000000c0000000 - 00000000e0000000 Nosave address range: 00000000e0000000 - 00000000f0000000 Nosave address range: 00000000f0000000 - 00000000fec00000 Nosave address range: 00000000fec00000 - 0000000100000000 Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) SMP: Allowing 4 CPUs, 0 hotplug CPUs PERCPU: Allocating 43264 bytes of per cpu data Built 1 zonelists. Total pages: 2058883 Kernel command line: ro root=LABEL=/ rhgb quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Checking aperture... Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0xac99000 - 0xec99000 Memory: 8155544k/9437184k available (2435k kernel code, 232444k reserved, 1145k data, 316k init) Calibrating delay using timer specific routine.. 3726.70 BogoMIPS (lpj=1863354) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 0/0 -> Node 0 using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) SMP alternatives: switching to UP code ACPI: Core revision 20060707 Using local APIC timer interrupts. result 16624223 Detected 16.624 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/4 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 3723.83 BogoMIPS (lpj=1861917) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU 5120 @ 1.86GHz stepping 06 SMP alternatives: switching to SMP code Booting processor 2/4 APIC 0x6 Initializing CPU#2 Calibrating delay using timer specific routine.. 3723.87 BogoMIPS (lpj=1861937) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 2/6 -> Node 0 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 CPU2: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU 5120 @ 1.86GHz stepping 06 SMP alternatives: switching to SMP code Booting processor 3/4 APIC 0x7 Initializing CPU#3 Calibrating delay using timer specific routine.. 3723.89 BogoMIPS (lpj=1861949) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 3/7 -> Node 0 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 1 CPU3: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU 5120 @ 1.86GHz stepping 06 Brought up 4 CPUs time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer. time.c: Detected 1861.914 MHz processor. sizeof(vma)=176 bytes sizeof(page)=64 bytes sizeof(inode)=720 bytes sizeof(dentry)=224 bytes sizeof(ext3inode)=968 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=248 bytes sizeof(task_struct)=1952 bytes migration_cost=15,10876 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) 0000:00:1f.1: trying to change BAR0 from 01F0 to 01F0 0000:00:1f.1: trying to change BAR1 from 03F4 to 03F4 0000:00:1f.1: trying to change BAR2 from 0170 to 0170 0000:00:1f.1: trying to change BAR3 from 0374 to 0374 Boot video device is 0000:01:01.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4.PCI5.PCI6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4.PCIA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIS._PRT] ACPI: PCI Interrupt Link [LP00] (IRQs *3) ACPI: PCI Interrupt Link [LP01] (IRQs *10) ACPI: PCI Interrupt Link [LP02] (IRQs *7) ACPI: Blank IRQ resource ACPI: Resource is not an IRQ entry ACPI: PCI Interrupt Link [LP03] (IRQs) *0, disabled. ACPI: Blank IRQ resource ACPI: Resource is not an IRQ entry ACPI: PCI Interrupt Link [LP04] (IRQs) *0, disabled. ACPI: Blank IRQ resource ACPI: Resource is not an IRQ entry ACPI: PCI Interrupt Link [LP05] (IRQs) *0, disabled. ACPI: PCI Interrupt Link [LP06] (IRQs *11) ACPI: PCI Interrupt Link [LP07] (IRQs *5) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz PCI-GART: No AMD northbridge found. pnp: 00:01: ioport range 0x520-0x53f has been reserved pnp: 00:01: ioport range 0x540-0x547 has been reserved pnp: 00:09: ioport range 0x400-0x43f has been reserved PCI: Bridge: 0000:11:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:11:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:10:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:10:00.3 IO window: 5000-5fff MEM window: c5000000-c6ffffff PREFETCH window: c2000000-c20fffff PCI: Bridge: 0000:00:02.0 IO window: 5000-5fff MEM window: c5000000-c6ffffff PREFETCH window: c2000000-c20fffff PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:04.0 IO window: 6000-ffff MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:03:00.0 IO window: disabled. MEM window: c7000000-caefffff PREFETCH window: disabled. PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: c7000000-caefffff PREFETCH window: disabled. PCI: Bridge: 0000:00:07.0 IO window: 4000-4fff MEM window: cb000000-ccffffff PREFETCH window: caf00000-caffffff PCI: Bridge: 0000:05:00.0 IO window: disabled. MEM window: cd000000-cfffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: cd000000-cfffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 3000-3fff MEM window: de000000-dfffffff PREFETCH window: d0000000-ddffffff PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:10:00.0 to 64 PCI: Setting latency timer of device 0000:11:00.0 to 64 ACPI: PCI Interrupt 0000:11:01.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:11:01.0 to 64 PCI: Setting latency timer of device 0000:10:00.3 to 64 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:05.0 to 64 PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:03:00.0 to 64 PCI: Setting latency timer of device 0000:00:07.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:05:00.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 131072 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 1141k freed audit: initializing netlink socket (disabled) audit(1178900159.719:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 97D89BC24BCFD501 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie01] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] Allocate Port Service[0000:00:03.0:pcie01] PCI: Setting latency timer of device 0000:00:04.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] Allocate Port Service[0000:00:04.0:pcie01] PCI: Setting latency timer of device 0000:00:05.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:05.0:pcie00] Allocate Port Service[0000:00:05.0:pcie01] PCI: Setting latency timer of device 0000:00:06.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] Allocate Port Service[0000:00:06.0:pcie01] PCI: Setting latency timer of device 0000:00:07.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:07.0:pcie00] Allocate Port Service[0000:00:07.0:pcie01] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:10:00.0 to 64 Allocate Port Service[0000:10:00.0:pcie10] Allocate Port Service[0000:10:00.0:pcie11] PCI: Setting latency timer of device 0000:11:00.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:11:00.0:pcie20] Allocate Port Service[0000:11:00.0:pcie21] PCI: Setting latency timer of device 0000:11:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:11:01.0:pcie20] Allocate Port Service[0000:11:01.0:pcie21] Evaluate _OSC Set fails. Status = 0x0005 Evaluate _OSC Set fails. Status = 0x0005 aer_init: AER service init fails - Run ACPI _OSC fails aer: probe of 0000:00:02.0:pcie01 failed with error 2 aer_init: AER service init fails - No ACPI _OSC support aer: probe of 0000:00:03.0:pcie01 failed with error 1 Evaluate _OSC Set fails. Status = 0x0005 Evaluate _OSC Set fails. Status = 0x0005 aer_init: AER service init fails - Run ACPI _OSC fails aer: probe of 0000:00:04.0:pcie01 failed with error 2 aer_init: AER service init fails - No ACPI _OSC support aer: probe of 0000:00:05.0:pcie01 failed with error 1 Evaluate _OSC Set fails. Status = 0x0005 Evaluate _OSC Set fails. Status = 0x0005 aer_init: AER service init fails - Run ACPI _OSC fails aer: probe of 0000:00:06.0:pcie01 failed with error 2 Evaluate _OSC Set fails. Status = 0x0005 Evaluate _OSC Set fails. Status = 0x0005 aer_init: AER service init fails - Run ACPI _OSC fails aer: probe of 0000:00:07.0:pcie01 failed with error 2 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Processor [CPU2] (supports 8 throttling states) ACPI: Processor [CPU3] (supports 8 throttling states) Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ESB2: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 23 (level, low) -> IRQ 23 ESB2: chipset revision 9 ESB2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x0480-0x0487, BIOS settings: hda:DMA, hdb:DMA Probing IDE interface ide0... hda: HL-DT-STCD-RW/DVD DRIVE GCC-4244N, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... ide-floppy driver 0.99.newide usbcore: registered new interface driver libusual usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. i8042.c: Can't read CTR while initializing i8042. i8042: probe of i8042 failed with error -5 mice: PS/2 mouse device common for all mice TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI config is deprecated. Use X86_ACPI_CPUFREQ (acpi-cpufreq) instead. speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI config is deprecated. Use X86_ACPI_CPUFREQ (acpi-cpufreq) instead. speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI config is deprecated. Use X86_ACPI_CPUFREQ (acpi-cpufreq) instead. speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI config is deprecated. Use X86_ACPI_CPUFREQ (acpi-cpufreq) instead. ACPI: (supports S0 S4 S5) Freeing unused kernel memory: 316k freed Write protecting the kernel read-only data: 735k SCSI subsystem initialized ACPI: PCI Interrupt 0000:14:01.0[A] -> GSI 24 (level, low) -> IRQ 24 scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs scsi 0:0:0:0: Direct-Access VP-1252- FB951223-VOL#00 R001 PQ: 0 ANSI: 5 target0:0:0: asynchronous scsi0:A:0:0: Tagged Queuing enabled. Depth 4 target0:0:0: Beginning Domain Validation target0:0:0: wide asynchronous target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127) target0:0:0: Ending Domain Validation SCSI device sda: 3906247680 512-byte hdwr sectors (1999999 MB) sda: Write Protect is off sda: Mode Sense: cb 00 00 08 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 3906247680 512-byte hdwr sectors (1999999 MB) sda: Write Protect is off sda: Mode Sense: cb 00 00 08 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: unknown partition table sd 0:0:0:0: Attached scsi disk sda scsi 0:0:0:1: Direct-Access VP-1252- FB951223-VOL#01 R001 PQ: 0 ANSI: 5 scsi0:A:0:1: Tagged Queuing enabled. Depth 4 SCSI device sdb: 3906247680 512-byte hdwr sectors (1999999 MB) sdb: Write Protect is off sdb: Mode Sense: cb 00 00 08 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdb: 3906247680 512-byte hdwr sectors (1999999 MB) sdb: Write Protect is off sdb: Mode Sense: cb 00 00 08 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: unknown partition table sd 0:0:0:1: Attached scsi disk sdb scsi 0:0:0:2: Direct-Access VP-1252- FB951223-VOL#02 R001 PQ: 0 ANSI: 5 scsi0:A:0:2: Tagged Queuing enabled. Depth 4 SCSI device sdc: 3906247680 512-byte hdwr sectors (1999999 MB) sdc: Write Protect is off sdc: Mode Sense: cb 00 00 08 SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdc: 3906247680 512-byte hdwr sectors (1999999 MB) sdc: Write Protect is off sdc: Mode Sense: cb 00 00 08 SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: unknown partition table sd 0:0:0:2: Attached scsi disk sdc scsi 0:0:0:3: Direct-Access VP-1252- FB951223-VOL#03 R001 PQ: 0 ANSI: 5 scsi0:A:0:3: Tagged Queuing enabled. Depth 4 SCSI device sdd: 2929674240 512-byte hdwr sectors (1499993 MB) sdd: Write Protect is off sdd: Mode Sense: cb 00 00 08 SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdd: 2929674240 512-byte hdwr sectors (1499993 MB) sdd: Write Protect is off sdd: Mode Sense: cb 00 00 08 SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdd: unknown partition table sd 0:0:0:3: Attached scsi disk sdd Adaptec aacraid driver (1.1-5[2423]-mh3) ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:02:00.0 to 64 AAC0: kernel 5.1-0[9257] AAC0: monitor 5.1-0[9257] AAC0: bios 5.1-0[9257] AAC0: serial 32418003 AAC0: 64bit support enabled. AAC0: 64 Bit DAC enabled scsi1 : ServeRAID scsi 1:0:0:0: Direct-Access ServeRA 8k-l Mirror V1.0 PQ: 0 ANSI: 2 SCSI device sde: 143132672 512-byte hdwr sectors (73284 MB) sde: assuming Write Enabled sde: assuming drive cache: write through SCSI device sde: 143132672 512-byte hdwr sectors (73284 MB) sde: assuming Write Enabled sde: assuming drive cache: write through sde: sde1 sde2 sde3 sd 1:0:0:0: Attached scsi removable disk sde kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1178900181.522:2): selinux=0 auid=4294967295 input: PC Speaker as /class/input/input1 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 20 (level, low) -> IRQ 20 intel_rng: FWH not detected hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.5.5 (February 1, 2007) ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18 eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz found at mem c8000000, IRQ 18, node addr 001a641045e2 ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16 eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz found at mem ce000000, IRQ 16, node addr 001a641045e4 libata version 2.00 loaded. sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:1: Attached scsi generic sg1 type 0 sd 0:0:0:2: Attached scsi generic sg2 type 0 sd 0:0:0:3: Attached scsi generic sg3 type 0 sd 1:0:0:0: Attached scsi generic sg4 type 0 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002200 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 22, io base 0x00002600 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 23, io base 0x00002a00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 3-2: new low speed USB device using uhci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice input: Dell Dell USB Keyboard as /class/input/input2 input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-2 sd 0:0:0:0: Attempting to queue an ABORT message:CDB: 0x12 0x1 0x0 0x0 0xfe 0x0 scsi0: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x20c Mode 0x22 Card was paused INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19] SCSISIGI[0x67] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x60] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 4 LASTSCB 0xffff CURRSCB 0x3 NEXTSCB 0x0 qinstart = 165 qinfifonext = 165 QINFIFO: WAITING_TID_QUEUES: 0 ( 0x2 0x1 0x0 ) Pending list: 0 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 1 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] Total 4 Kernel Free SCB list: Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] scsi0: FIFO1 Active, LONGJMP == 0x81f2, SCB 0x3 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x28] DFSTATUS[0x88] SG_CACHE_SHADOW[0xa] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x44] SHADDR = 0x23e967102, SHCNT = 0xfffffc HADDR = 0x23e9670fe, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc] CCSCBCTL[0x4] scsi0: REG0 == 0x0, SINDEX = 0x102, DINDEX = 0x102 scsi0: SCBPTR == 0x1, SCB_NEXT == 0x0, SCB_NEXT2 == 0xffff CDB 12 1 0 0 fe 0 STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> sd 0:0:0:0: Device is active, asserting ATN scsi0: Recovery code sleeping scsi0: Timer Expired (active 1) Recovery code awake scsi0: Command abort returning 0x2003 sd 0:0:0:1: Attempting to queue an ABORT message:CDB: 0x12 0x1 0x0 0x0 0xfe 0x0 scsi0: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x31 Mode 0x11 Card was paused INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19] SCSISIGI[0x77] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x60] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 4 LASTSCB 0xffff CURRSCB 0x3 NEXTSCB 0x0 qinstart = 165 qinfifonext = 165 QINFIFO: WAITING_TID_QUEUES: 0 ( 0x2 0x1 0x0 ) Pending list: 0 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 1 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] Total 4 Kernel Free SCB list: Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] scsi0: FIFO1 Active, LONGJMP == 0x81f2, SCB 0x3 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x28] DFSTATUS[0x88] SG_CACHE_SHADOW[0xa] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x44] SHADDR = 0x23e967102, SHCNT = 0xfffffc HADDR = 0x23e9670fe, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc] CCSCBCTL[0x4] scsi0: REG0 == 0x3, SINDEX = 0x102, DINDEX = 0x102 scsi0: SCBPTR == 0x3, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xffff CDB 12 1 0 82 8 1c STACK: 0x20b 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0:0:0:1: Cmd aborted from QINFIFO sd 0:0:0:1: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x22 Mode 0x33 Card was paused INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19] SCSISIGI[0x77] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x60] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 3 LASTSCB 0xffff CURRSCB 0x3 NEXTSCB 0x0 qinstart = 165 qinfifonext = 166 QINFIFO: 0x2 WAITING_TID_QUEUES: 0 ( 0x1 0x0 ) Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 0 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 1 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] Total 4 Kernel Free SCB list: Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] scsi0: FIFO1 Active, LONGJMP == 0x81f2, SCB 0x3 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x28] DFSTATUS[0x88] SG_CACHE_SHADOW[0xa] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x44] SHADDR = 0x23e967102, SHCNT = 0xfffffc HADDR = 0x23e9670fe, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc] CCSCBCTL[0x4] scsi0: REG0 == 0xffff, SINDEX = 0x102, DINDEX = 0x102 scsi0: SCBPTR == 0x3, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xffff CDB 12 1 0 82 8 1c STACK: 0x20d 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0:0:0:1: Cmd aborted from QINFIFO sd 0:0:0:3: Attempting to queue an ABORT message:CDB: 0x12 0x1 0x0 0x0 0xfe 0x0 scsi0: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x20e Mode 0x11 Card was paused INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19] SCSISIGI[0x77] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x60] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 3 LASTSCB 0xffff CURRSCB 0x3 NEXTSCB 0x0 qinstart = 165 qinfifonext = 165 QINFIFO: WAITING_TID_QUEUES: 0 ( 0x1 0x0 ) Pending list: 0 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 1 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] Total 3 Kernel Free SCB list: 2 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] scsi0: FIFO1 Active, LONGJMP == 0x81f2, SCB 0x3 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x28] DFSTATUS[0x88] SG_CACHE_SHADOW[0xa] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x44] SHADDR = 0x23e967102, SHCNT = 0xfffffc HADDR = 0x23e9670fe, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc] CCSCBCTL[0x4] scsi0: REG0 == 0x3, SINDEX = 0x102, DINDEX = 0x102 scsi0: SCBPTR == 0x3, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xffff CDB 12 1 0 82 8 1c STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0:0:0:3: Cmd aborted from QINFIFO sd 0:0:0:3: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x20c Mode 0x22 Card was paused INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19] SCSISIGI[0x77] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x60] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 2 LASTSCB 0xffff CURRSCB 0x3 NEXTSCB 0x0 qinstart = 165 qinfifonext = 166 QINFIFO: 0x1 WAITING_TID_QUEUES: 0 ( 0x0 ) Pending list: 1 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 0 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] Total 3 Kernel Free SCB list: 2 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] scsi0: FIFO1 Active, LONGJMP == 0x81f2, SCB 0x3 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x28] DFSTATUS[0x88] SG_CACHE_SHADOW[0xa] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x44] SHADDR = 0x23e967102, SHCNT = 0xfffffc HADDR = 0x23e9670fe, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc] CCSCBCTL[0x4] scsi0: REG0 == 0x0, SINDEX = 0x102, DINDEX = 0x102 scsi0: SCBPTR == 0x1, SCB_NEXT == 0x0, SCB_NEXT2 == 0xffff CDB 12 1 0 0 fe 0 STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0:0:0:3: Cmd aborted from QINFIFO sd 0:0:0:2: Attempting to queue an ABORT message:CDB: 0x12 0x1 0x0 0x0 0xfe 0x0 scsi0: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x20c Mode 0x22 Card was paused INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19] SCSISIGI[0x77] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x60] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 2 LASTSCB 0xffff CURRSCB 0x3 NEXTSCB 0x0 qinstart = 165 qinfifonext = 165 QINFIFO: WAITING_TID_QUEUES: 0 ( 0x0 ) Pending list: 0 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] Total 2 Kernel Free SCB list: 1 2 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] scsi0: FIFO1 Active, LONGJMP == 0x81f2, SCB 0x3 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x28] DFSTATUS[0x88] SG_CACHE_SHADOW[0xa] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x44] SHADDR = 0x23e967102, SHCNT = 0xfffffc HADDR = 0x23e9670fe, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc] CCSCBCTL[0x4] scsi0: REG0 == 0x0, SINDEX = 0x102, DINDEX = 0x102 scsi0: SCBPTR == 0x1, SCB_NEXT == 0x0, SCB_NEXT2 == 0xffff CDB 12 1 0 0 fe 0 STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0:0:0:2: Cmd aborted from QINFIFO sd 0:0:0:2: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x33 Mode 0x11 Card was paused INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19] SCSISIGI[0x77] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x60] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x3 NEXTSCB 0x0 qinstart = 165 qinfifonext = 166 QINFIFO: 0x0 WAITING_TID_QUEUES: Pending list: 0 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] Total 2 Kernel Free SCB list: 1 2 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] scsi0: FIFO1 Active, LONGJMP == 0x81f2, SCB 0x3 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x28] DFSTATUS[0x88] SG_CACHE_SHADOW[0xa] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x44] SHADDR = 0x23e967102, SHCNT = 0xfffffc HADDR = 0x23e9670fe, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc] CCSCBCTL[0x4] scsi0: REG0 == 0x3, SINDEX = 0x102, DINDEX = 0x102 scsi0: SCBPTR == 0x3, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xffff CDB 12 1 0 82 8 1c STACK: 0x20c 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0:0:0:2: Cmd aborted from QINFIFO sd 0:0:0:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x1 0x0 0x0 0xfe 0x0 scsi0: Device reset code sleeping scsi0: Device reset timer expired (active 2) scsi0: Device reset returning 0x2003 sd 0:0:0:1: Attempting to queue a TARGET RESET message:CDB: 0x12 0x1 0x0 0x0 0xfe 0x0 scsi0: Device reset code sleeping scsi0: Device reset timer expired (active 1) scsi0: Device reset returning 0x2003 sd 0:0:0:2: Attempting to queue a TARGET RESET message:CDB: 0x12 0x1 0x0 0x0 0xfe 0x0 scsi0: Device reset code sleeping scsi0: Device reset timer expired (active 1) scsi0: Device reset returning 0x2003 sd 0:0:0:3: Attempting to queue a TARGET RESET message:CDB: 0x12 0x1 0x0 0x0 0xfe 0x0 scsi0: Device reset code sleeping scsi0: Device reset timer expired (active 1) scsi0: Device reset returning 0x2003 Recovery SCB completes Recovery SCB completes Recovery SCB completes Recovery SCB completes Recovery SCB completes sd 0:0:0:3: Attempting to queue an ABORT message:CDB: 0x12 0x1 0x0 0x0 0xfe 0x0 scsi0: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x20c Mode 0x22 Card was paused INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19] SCSISIGI[0x67] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x60] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 8 CMDS_PENDING = 4 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 qinstart = 173 qinfifonext = 173 QINFIFO: WAITING_TID_QUEUES: 0 ( 0x2 0x1 ) Pending list: 1 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 7 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x7] 3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] Total 4 Kernel Free SCB list: 0 6 5 4 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] scsi0: FIFO1 Active, LONGJMP == 0x80f2, SCB 0x3 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x28] DFSTATUS[0x88] SG_CACHE_SHADOW[0xa] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x44] SHADDR = 0x23e1a1102, SHCNT = 0xfffffc HADDR = 0x23e1a10fe, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc] CCSCBCTL[0x4] scsi0: REG0 == 0x1, SINDEX = 0x102, DINDEX = 0x102 scsi0: SCBPTR == 0x2, SCB_NEXT == 0x1, SCB_NEXT2 == 0xffff CDB 12 1 0 0 fe 0 STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> (scsi0:A:0:3): Device is disconnected, re-queuing SCB scsi0: Recovery code sleeping scsi0: Timer Expired (active 1) Recovery code awake scsi0: Command abort returning 0x2003 sd 0:0:0:1: Attempting to queue an ABORT message:CDB: 0x12 0x1 0x0 0x0 0xfe 0x0 scsi0: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x21 Mode 0x22 Card was paused INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19] SCSISIGI[0x67] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x60] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 8 CMDS_PENDING = 3 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 qinstart = 173 qinfifonext = 174 QINFIFO: 0x7 WAITING_TID_QUEUES: 0 ( 0x2 0x1 ) Pending list: 1 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 7 FIFO_USE[0x0] SCB_CONTROL[0x74] SCB_SCSIID[0x7] 3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] Total 4 Kernel Free SCB list: 0 6 5 4 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] scsi0: FIFO1 Active, LONGJMP == 0x80f2, SCB 0x3 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x28] DFSTATUS[0x88] SG_CACHE_SHADOW[0xa] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x44] SHADDR = 0x23e1a1102, SHCNT = 0xfffffc HADDR = 0x23e1a10fe, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc] CCSCBCTL[0x4] scsi0: REG0 == 0x1, SINDEX = 0x102, DINDEX = 0x102 scsi0: SCBPTR == 0x2, SCB_NEXT == 0x1, SCB_NEXT2 == 0xffff CDB 12 1 0 0 fe 0 STACK: 0x20d 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> sd 0:0:0:1: Device is active, asserting ATN scsi0: Recovery code sleeping scsi0: Timer Expired (active 1) Recovery code awake scsi0: Command abort returning 0x2003 sd 0:0:0:0: Attempting to queue an ABORT message:CDB: 0x12 0x1 0x0 0x0 0xfe 0x0 scsi0: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x34 Mode 0x22 Card was paused INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19] SCSISIGI[0x77] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x60] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 8 CMDS_PENDING = 3 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 qinstart = 173 qinfifonext = 174 QINFIFO: 0x7 WAITING_TID_QUEUES: 0 ( 0x2 0x1 ) Pending list: 1 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 7 FIFO_USE[0x0] SCB_CONTROL[0x74] SCB_SCSIID[0x7] 3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] Total 4 Kernel Free SCB list: 0 6 5 4 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] scsi0: FIFO1 Active, LONGJMP == 0x80f2, SCB 0x3 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x28] DFSTATUS[0x88] SG_CACHE_SHADOW[0xa] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x44] SHADDR = 0x23e1a1102, SHCNT = 0xfffffc HADDR = 0x23e1a10fe, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc] CCSCBCTL[0x4] scsi0: REG0 == 0x1, SINDEX = 0x102, DINDEX = 0x102 scsi0: SCBPTR == 0x2, SCB_NEXT == 0x1, SCB_NEXT2 == 0xffff CDB 12 1 0 0 fe 0 STACK: 0x20c 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0:0:0:0: Cmd aborted from QINFIFO sd 0:0:0:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x20c Mode 0x22 Card was paused INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19] SCSISIGI[0x77] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x60] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 8 CMDS_PENDING = 2 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 qinstart = 173 qinfifonext = 175 QINFIFO: 0x7 0x2 WAITING_TID_QUEUES: 0 ( 0x1 ) Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 1 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 7 FIFO_USE[0x0] SCB_CONTROL[0x74] SCB_SCSIID[0x7] 3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] Total 4 Kernel Free SCB list: 0 6 5 4 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] scsi0: FIFO1 Active, LONGJMP == 0x80f2, SCB 0x3 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x28] DFSTATUS[0x88] SG_CACHE_SHADOW[0xa] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x44] SHADDR = 0x23e1a1102, SHCNT = 0xfffffc HADDR = 0x23e1a10fe, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc] CCSCBCTL[0x4] scsi0: REG0 == 0x1, SINDEX = 0x102, DINDEX = 0x102 scsi0: SCBPTR == 0x2, SCB_NEXT == 0x1, SCB_NEXT2 == 0xffff CDB 12 1 0 0 fe 0 STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0:0:0:0: Cmd aborted from QINFIFO sd 0:0:0:2: Attempting to queue an ABORT message:CDB: 0x12 0x1 0x0 0x0 0xfe 0x0 scsi0: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x20c Mode 0x22 Card was paused INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19] SCSISIGI[0x77] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x60] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 8 CMDS_PENDING = 2 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 qinstart = 173 qinfifonext = 174 QINFIFO: 0x7 WAITING_TID_QUEUES: 0 ( 0x1 ) Pending list: 1 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 7 FIFO_USE[0x0] SCB_CONTROL[0x74] SCB_SCSIID[0x7] 3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] Total 3 Kernel Free SCB list: 2 0 6 5 4 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] scsi0: FIFO1 Active, LONGJMP == 0x80f2, SCB 0x3 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x28] DFSTATUS[0x88] SG_CACHE_SHADOW[0xa] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x44] SHADDR = 0x23e1a1102, SHCNT = 0xfffffc HADDR = 0x23e1a10fe, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc] CCSCBCTL[0x4] scsi0: REG0 == 0x1, SINDEX = 0x102, DINDEX = 0x102 scsi0: SCBPTR == 0x2, SCB_NEXT == 0x1, SCB_NEXT2 == 0xffff CDB 12 1 0 0 fe 0 STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0:0:0:2: Cmd aborted from QINFIFO sd 0:0:0:2: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x20c Mode 0x22 Card was paused INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19] SCSISIGI[0x77] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x60] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 8 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 qinstart = 173 qinfifonext = 175 QINFIFO: 0x7 0x1 WAITING_TID_QUEUES: Pending list: 1 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 7 FIFO_USE[0x0] SCB_CONTROL[0x74] SCB_SCSIID[0x7] 3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] Total 3 Kernel Free SCB list: 2 0 6 5 4 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] scsi0: FIFO1 Active, LONGJMP == 0x80f2, SCB 0x3 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x28] DFSTATUS[0x88] SG_CACHE_SHADOW[0xa] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x44] SHADDR = 0x23e1a1102, SHCNT = 0xfffffc HADDR = 0x23e1a10fe, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc] CCSCBCTL[0x4] scsi0: REG0 == 0x1, SINDEX = 0x102, DINDEX = 0x102 scsi0: SCBPTR == 0x2, SCB_NEXT == 0x1, SCB_NEXT2 == 0xffff CDB 12 1 0 0 fe 0 STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0:0:0:2: Cmd aborted from QINFIFO sd 0:0:0:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x1 0x0 0x0 0xfe 0x0 scsi0: Device reset code sleeping scsi0: Device reset timer expired (active 1) scsi0: Device reset returning 0x2003 sd 0:0:0:1: Attempting to queue a TARGET RESET message:CDB: 0x12 0x1 0x0 0x0 0xfe 0x0 scsi0: Device reset code sleeping scsi0: Device reset timer expired (active 2) scsi0: Device reset returning 0x2003 sd 0:0:0:2: Attempting to queue a TARGET RESET message:CDB: 0x12 0x1 0x0 0x0 0xfe 0x0 scsi0: Device reset code sleeping scsi0: Device reset timer expired (active 1) scsi0: Device reset returning 0x2003 sd 0:0:0:3: Attempting to queue a TARGET RESET message:CDB: 0x12 0x1 0x0 0x0 0xfe 0x0 scsi0: Device reset code sleeping scsi0: Device reset timer expired (active 2) scsi0: Device reset returning 0x2003 scsi0: bus reset still active sd 0:0:0:3: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x20c Mode 0x22 Card was paused INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19] SCSISIGI[0x77] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x60] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 8 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 qinstart = 173 qinfifonext = 179 QINFIFO: 0x7 0x1 0x2 0x0 0x6 0x5 WAITING_TID_QUEUES: Pending list: 5 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x0] 6 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x0] 0 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 1 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 7 FIFO_USE[0x0] SCB_CONTROL[0x74] SCB_SCSIID[0x7] 3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] Total 7 Kernel Free SCB list: 4 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] scsi0: FIFO1 Active, LONGJMP == 0x80f2, SCB 0x3 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x28] DFSTATUS[0x88] SG_CACHE_SHADOW[0xa] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x44] SHADDR = 0x23e1a1102, SHCNT = 0xfffffc HADDR = 0x23e1a10fe, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc] CCSCBCTL[0x4] scsi0: REG0 == 0x1, SINDEX = 0x102, DINDEX = 0x102 scsi0: SCBPTR == 0x2, SCB_NEXT == 0x1, SCB_NEXT2 == 0xffff CDB 12 1 0 0 fe 0 STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0:0:0:3: Cmd aborted from QINFIFO sd 0:0:0:1: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x20c Mode 0x22 Card was paused INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19] SCSISIGI[0x77] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x60] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 8 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 qinstart = 173 qinfifonext = 179 QINFIFO: 0x7 0x1 0x2 0x0 0x6 0x5 WAITING_TID_QUEUES: Pending list: 5 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x0] 6 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x0] 0 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 1 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 7 FIFO_USE[0x0] SCB_CONTROL[0x74] SCB_SCSIID[0x7] 3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] Total 7 Kernel Free SCB list: 4 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] scsi0: FIFO1 Active, LONGJMP == 0x80f2, SCB 0x3 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x28] DFSTATUS[0x88] SG_CACHE_SHADOW[0xa] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x44] SHADDR = 0x23e1a1102, SHCNT = 0xfffffc HADDR = 0x23e1a10fe, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc] CCSCBCTL[0x4] scsi0: REG0 == 0x1, SINDEX = 0x102, DINDEX = 0x102 scsi0: SCBPTR == 0x2, SCB_NEXT == 0x1, SCB_NEXT2 == 0xffff CDB 12 1 0 0 fe 0 STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0:0:0:1: Cmd aborted from QINFIFO sd 0:0:0:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x20c Mode 0x22 Card was paused INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19] SCSISIGI[0x77] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x60] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 8 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 qinstart = 173 qinfifonext = 179 QINFIFO: 0x7 0x1 0x2 0x0 0x6 0x5 WAITING_TID_QUEUES: Pending list: 5 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x0] 6 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x0] 0 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 1 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 7 FIFO_USE[0x0] SCB_CONTROL[0x74] SCB_SCSIID[0x7] 3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] Total 7 Kernel Free SCB list: 4 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] scsi0: FIFO1 Active, LONGJMP == 0x80f2, SCB 0x3 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x28] DFSTATUS[0x88] SG_CACHE_SHADOW[0xa] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x44] SHADDR = 0x23e1a1102, SHCNT = 0xfffffc HADDR = 0x23e1a10fe, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc] CCSCBCTL[0x4] scsi0: REG0 == 0x1, SINDEX = 0x102, DINDEX = 0x102 scsi0: SCBPTR == 0x2, SCB_NEXT == 0x1, SCB_NEXT2 == 0xffff CDB 12 1 0 0 fe 0 STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0:0:0:0: Cmd aborted from QINFIFO sd 0:0:0:2: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x20c Mode 0x22 Card was paused INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x19] SCSISIGI[0x77] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x60] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 8 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 qinstart = 173 qinfifonext = 179 QINFIFO: 0x7 0x1 0x2 0x0 0x6 0x5 WAITING_TID_QUEUES: Pending list: 5 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x0] 6 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x0] 0 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 1 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 7 FIFO_USE[0x0] SCB_CONTROL[0x74] SCB_SCSIID[0x7] 3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] Total 7 Kernel Free SCB list: 4 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] scsi0: FIFO1 Active, LONGJMP == 0x80f2, SCB 0x3 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x28] DFSTATUS[0x88] SG_CACHE_SHADOW[0xa] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x44] SHADDR = 0x23e1a1102, SHCNT = 0xfffffc HADDR = 0x23e1a10fe, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc] CCSCBCTL[0x4] scsi0: REG0 == 0x1, SINDEX = 0x102, DINDEX = 0x102 scsi0: SCBPTR == 0x2, SCB_NEXT == 0x1, SCB_NEXT2 == 0xffff CDB 12 1 0 0 fe 0 STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> scsi0:0:0:2: Cmd aborted from QINFIFO sd 0:0:0:3: scsi: Device offlined - not ready after error recovery sd 0:0:0:1: scsi: Device offlined - not ready after error recovery sd 0:0:0:0: scsi: Device offlined - not ready after error recovery sd 0:0:0:2: scsi: Device offlined - not ready after error recovery floppy0: no floppy controllers found lp: driver loaded but no devices found input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] No dock devices found. ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sde1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sde3, internal journal EXT3-fs: mounted filesystem with ordered data mode. bnx2: eth0: using MSI bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON audit(1178900370.021:3): audit_pid=3952 old=0 by auid=4294967295 Loading iSCSI transport class v2.0-724. iscsi: registered transport (tcp) iscsi: registered transport (iser) Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: HIDP (Human Interface Emulation) ver 1.1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 eth0: no IPv6 routers present