lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Sun, 24 Jun 2007 14:32:22 +0200 From: Enrico Sardi <enricoss@...cali.it> To: linux-kernel@...r.kernel.org Subject: hsm violation Hi all! I found the following messages in the kernel log: --------------------------------- [ 45.288000] set_level status: 0 [ 45.572000] set_level status: 0 [ 45.740000] set_level status: 0 [ 46.820000] set_level status: 0 [ 47.092000] set_level status: 0 [ 61.176000] ata1.00: exception Emask 0x2 SAct 0x2 SErr 0x0 action 0x2 frozen [ 61.176000] ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x2 FIS=005040a1:00000004) [ 61.176000] ata1.00: cmd 60/08:08:37:cc:00/00:00:0c:00:00/40 tag 1 cdb 0x0 data 4096 in [ 61.176000] res 50/00:08:27:3c:ed/00:00:0b:00:00/40 Emask 0x2 (HSM violation) [ 61.488000] ata1: soft resetting port [ 61.660000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 61.660000] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808 [ 61.660000] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808 [ 61.660000] ata1.00: configured for UDMA/100 [ 61.660000] ata1: EH complete [ 61.660000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) [ 61.660000] sda: Write Protect is off [ 61.660000] sda: Mode Sense: 00 3a 00 00 [ 61.660000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 101.972000] set_level status: 0 [ 102.200000] set_level status: 0 [ 102.404000] set_level status: 0 [ 103.284000] set_level status: 0 [ 103.476000] set_level status: 0 [ 103.912000] set_level status: 0 [ 104.284000] set_level status: 0 [ 104.660000] set_level status: 0 [ 113.576000] set_level status: 0 [ 559.020000] set_level status: 0 [ 559.476000] set_level status: 0 [ 559.632000] set_level status: 0 [ 561.744000] set_level status: 0 [ 563.560000] set_level status: 0 [ 564.224000] set_level status: 0 [ 564.688000] set_level status: 0 [ 567.096000] set_level status: 0 [ 567.712000] set_level status: 0 [ 569.060000] set_level status: 0 [ 569.524000] set_level status: 0 [ 569.828000] set_level status: 0 [ 570.204000] set_level status: 0 [ 570.504000] set_level status: 0 [ 571.724000] set_level status: 0 [ 572.012000] set_level status: 0 [ 572.360000] set_level status: 0 [ 572.696000] set_level status: 0 [ 573.016000] set_level status: 0 [ 574.092000] set_level status: 0 [ 574.348000] set_level status: 0 [ 604.476000] set_level status: 0 [ 604.764000] set_level status: 0 [ 605.048000] set_level status: 0 [ 605.244000] set_level status: 0 [ 605.400000] set_level status: 0 [ 605.540000] set_level status: 0 [ 605.688000] set_level status: 0 [ 606.528000] set_level status: 0 [ 606.820000] set_level status: 0 [ 608.336000] set_level status: 0 ---------------------------------------------- This is the result of hdparm -I /dev/sda: /dev/sda: ATA device, with non-removable media Model Number: Hitachi HTS541616J9SA00 Serial Number: SB2461***V3AWE Firmware Revision: SB4OC70P Standards: Used: ATA/ATAPI-7 T13 1532D revision 1 Supported: 7 6 5 4 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 312581808 device size with M = 1024*1024: 152627 MBytes device size with M = 1000*1000: 160041 MBytes (160 GB) Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Vendor, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Advanced power management level: 128 (0x80) Recommended acoustic management value: 128, current value: 254 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE * Advanced Power Management feature set Power-Up In Standby feature set * SET_FEATURES required to spinup after power up SET_MAX security extension Automatic Acoustic Management feature set * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test * General Purpose Logging feature set * WRITE_{DMA|MULTIPLE}_FUA_EXT * 64-bit World wide name * IDLE_IMMEDIATE with UNLOAD * SATA-I signaling speed (1.5Gb/s) * Native Command Queueing (NCQ) * Host-initiated interface power management * Phy event counters Non-Zero buffer offsets in DMA Setup FIS DMA Setup Auto-Activate optimization Device-initiated interface power management In-order data delivery * Software settings preservation Security: Master password revision code = 65534 supported not enabled not locked frozen not expired: security count not supported: enhanced erase 82min for SECURITY ERASE UNIT. Checksum: correct ----------------------------------------------------- I'm using Ubuntu feisty fawn (2.6.20-16-generic) on an Acer Travelmate 6292 (Santa Rosa). Many thanks! Enrico - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists