Linux version 2.6.21 (grenie@cognac) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #5 SMP Sat Jun 23 17:09:46 CEST 2007 Command line: auto BOOT_IMAGE=Linux21 ro root=807 resume2=/dev/sda6 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000037e80000 (usable) BIOS-e820: 0000000037e80000 - 0000000037e91000 (ACPI data) BIOS-e820: 0000000037e91000 - 0000000037f00000 (ACPI NVS) BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 157) 0 entries of 256 used Entering add_active_range(0, 256, 228992) 1 entries of 256 used end_pfn_map = 1048576 DMI present. ACPI: RSDP 000F85C0, 0014 (r0 PTLTD ) ACPI: RSDT 37E8B6CC, 0038 (r1 PTLTD RSDT 6040000 LTP 0) ACPI: FACP 37E90D48, 0074 (r1 ATI Bowfin 6040000 ATI F4240) ACPI: DSDT 37E8B704, 5644 (r1 ATI SB600 6040000 MSFT 100000E) ACPI: FACS 37E91FC0, 0040 ACPI: TCPA 37E90DBC, 0032 (r2 AMD 6040000 PTEC 0) ACPI: SSDT 37E90DEE, 0182 (r1 PTLTD POWERNOW 6040000 LTP 1) ACPI: APIC 37E90F70, 0054 (r1 PTLTD APIC 6040000 LTP 0) ACPI: MCFG 37E90FC4, 003C (r1 PTLTD MCFG 6040000 LTP 0) Entering add_active_range(0, 0, 157) 0 entries of 256 used Entering add_active_range(0, 256, 228992) 1 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 157 0: 256 -> 228992 On node 0 totalpages: 228893 DMA zone: 56 pages used for memmap DMA zone: 1111 pages reserved DMA zone: 2830 pages, LIFO batch:0 DMA32 zone: 3074 pages used for memmap DMA32 zone: 221822 pages, LIFO batch:31 Normal zone: 0 pages used for memmap ATI board detected. Disabling timer routing over 8254. ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: IRQ9 used by override. Setting APIC routing to physical flat Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009d000 - 000000000009e000 Nosave address range: 000000000009e000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000ce000 Nosave address range: 00000000000ce000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 32768 bytes of per cpu data Built 1 zonelists. Total pages: 224652 Kernel command line: auto BOOT_IMAGE=Linux21 ro root=807 resume2=/dev/sda6 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Detected 1596.072 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Checking aperture... CPU 0: aperture @ 4804000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Memory: 896796k/915968k available (2291k kernel code, 18664k reserved, 1398k data, 212k init) Calibrating delay using timer specific routine.. 3195.19 BogoMIPS (lpj=5323517) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20070126 ..MP-BIOS bug: 8254 timer not connected to IO-APIC Using local APIC timer interrupts. result 12469327 Detected 12.469 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 3193.80 BogoMIPS (lpj=5319694) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02 Brought up 2 CPUs migration_cost=144 Device driver platform lacks bus and class support for being resumed. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 - e09fffff PCI: No mmconfig possible on device 00:18 ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Device driver pci0000:00 lacks bus and class support for being resumed. Boot video device is 0000:01:05.0 PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init Device driver pnp0 lacks bus and class support for being resumed. pnp: ACPI device : hid PNP0A03 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0200 pnp: ACPI device : hid PNP0C04 pnp: ACPI device : hid PNP0B00 pnp: ACPI device : hid PNP0800 pnp: ACPI device : hid PNP0303 pnp: ACPI device : hid SYN1015 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C01 pnp: PnP ACPI: found 10 devices Generic PHY: Registered new driver SCSI subsystem initialized libata version 2.20 loaded. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0 PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0 pnp: the driver 'system' has been registered pnp: match found with the PnP device '00:01' and the driver 'system' pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved pnp: 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved pnp: 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved pnp: match found with the PnP device '00:08' and the driver 'system' pnp: 00:08: ioport range 0x1080-0x1080 has been reserved pnp: 00:08: ioport range 0x220-0x22f has been reserved pnp: match found with the PnP device '00:09' and the driver 'system' pnp: 00:09: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:09: iomem range 0xfff00000-0xffffffff could not be reserved pnp: 00:09: iomem range 0x0-0xfff could not be reserved PCI: Bridge: 0000:00:01.0 IO window: 9000-9fff MEM window: c0100000-c01fffff PREFETCH window: c8000000-cfffffff PCI: Bridge: 0000:00:05.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: c0200000-c02fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:14.4 IO window: disabled. MEM window: c0300000-c03fffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:05.0 to 64 PCI: Setting latency timer of device 0000:00:06.0 to 64 NET: Registered protocol family 2 Time: acpi_pm clocksource has been installed. IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1183818151.163:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:05.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:05.0:pcie00] Allocate Port Service[0000:00:05.0:pcie01] Allocate Port Service[0000:00:05.0:pcie03] PCI: Setting latency timer of device 0000:00:06.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] Allocate Port Service[0000:00:06.0:pcie01] Allocate Port Service[0000:00:06.0:pcie02] Allocate Port Service[0000:00:06.0:pcie03] Evaluate _OSC Set fails. Status = 0x0005 Evaluate _OSC Set fails. Status = 0x0005 aer_init: AER service init fails - Run ACPI _OSC fails aer: probe of 0000:00:05.0:pcie01 failed with error 2 Evaluate _OSC Set fails. Status = 0x0005 Evaluate _OSC Set fails. Status = 0x0005 aer_init: AER service init fails - Run ACPI _OSC fails aer: probe of 0000:00:06.0:pcie01 failed with error 2 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: framebuffer at 0xc8000000, mapped to 0xffffc20000b00000, using 4608k, total 16384k vesafb: mode is 1024x768x24, linelength=3072, pages=6 vesafb: scrolling: redraw vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device ACPI: Processor [CPU0] (supports 8 throttling states) Real Time Clock Driver v1.12ac Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0) Linux agpgart interface v0.102 (c) Dave Jones RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize loop: loaded (max 8 devices) Broadcom BCM5411: Registered new driver Broadcom BCM5421: Registered new driver Broadcom BCM5461: Registered new driver Device driver lo lacks bus and class support for being resumed. b44.c:v1.01 (Jun 16, 2006) ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 21 (level, low) -> IRQ 21 Device driver eth0 lacks bus and class support for being resumed. eth0: Broadcom 4400 10/100BaseT Ethernet 00:15:c5:c8:ed:39 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SB600_PATA: IDE controller at PCI slot 0000:00:14.1 ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 SB600_PATA: chipset revision 0 SB600_PATA: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x8420-0x8427, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: TSSTcorp DVD+/-RW TS-L632D, ATAPI CD/DVD-ROM drive Device driver ide0 lacks bus and class support for being resumed. ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 PCI driver AMD_IDE lacks driver specific resume support. PCI driver ATIIXP_IDE lacks driver specific resume support. hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ahci 0000:00:12.0: version 2.1 ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:12.0: flags: 64bit ncq ilck pm led clo pmp pio slum part ata1: SATA max UDMA/133 cmd 0xffffc20000034100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22 ata2: SATA max UDMA/133 cmd 0xffffc20000034180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22 ata3: SATA max UDMA/133 cmd 0xffffc20000034200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22 ata4: SATA max UDMA/133 cmd 0xffffc20000034280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22 scsi0 : ahci Device driver host0 lacks bus and class support for being resumed. ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC74P, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/100 scsi1 : ahci Device driver host1 lacks bus and class support for being resumed. ata2: SATA link down (SStatus 0 SControl 300) scsi2 : ahci Device driver host2 lacks bus and class support for being resumed. ata3: SATA link down (SStatus 0 SControl 300) scsi3 : ahci Device driver host3 lacks bus and class support for being resumed. ata4: SATA link down (SStatus 0 SControl 300) Device driver target0:0:0 lacks bus and class support for being resumed. scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > sd 0:0:0:0: Attached scsi disk sda pnp: the driver 'i8042 kbd' has been registered pnp: match found with the PnP device '00:06' and the driver 'i8042 kbd' pnp: the driver 'i8042 aux' has been registered pnp: match found with the PnP device '00:07' and the driver 'i8042 aux' PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 input: PC Speaker as /class/input/input1 Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04713/0x200000 input: SynPS/2 Synaptics TouchPad as /class/input/input2 piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device Device driver i2c-0 lacks bus and class support for being resumed. PCI driver piix4_smbus lacks driver specific resume support. PCI driver k8temp lacks driver specific resume support. TCP bic registered NET: Registered protocol family 1 powernow-k8: Found 2 AMD Turion(tm) 64 X2 Mobile Technology TL-50 processors (version 2.00.00) powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x13 powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e Suspend v2.2.9.13 Suspend2 Userspace Storage Manager support registered. Suspend2 Basic User Interface support registered. Suspend2 Compressor support registered. Suspend2 Block I/O support registered. Suspend2 Swap Allocator support registered. Suspend2 File Allocator support registered. Suspend2 Userspace UI support registered. Replacing swsusp. No storage allocator is currently active. Rechecking whether we can use one. Suspend2: SwapAllocator: Signature found. Suspend2: Resuming enabled. Suspend2: Normal swapspace found. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 212k freed PCI driver shpchp lacks driver specific resume support. shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci: SDHCI controller found at 0000:08:01.0 [1180:0822] (rev 19) ACPI: PCI Interrupt 0000:08:01.0[B] -> GSI 20 (level, low) -> IRQ 20 Device driver mmc0 lacks bus and class support for being resumed. mmc0: SDHCI at 0xc0302000 irq 20 DMA ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:13.0: irq 16, io mem 0xc0005000 Device driver usbdev1.1_ep00 lacks bus and class support for being resumed. usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Device driver usbdev1.1_ep81 lacks bus and class support for being resumed. ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.1: irq 17, io mem 0xc0006000 Device driver usbdev2.1_ep00 lacks bus and class support for being resumed. usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected bcm43xx driver Device driver usbdev2.1_ep81 lacks bus and class support for being resumed. ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 19, io mem 0xc0004400 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Device driver usbdev3.1_ep00 lacks bus and class support for being resumed. usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 10 ports detected Device driver usbdev3.1_ep81 lacks bus and class support for being resumed. ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 18, io mem 0xc0007000 Device driver usbdev4.1_ep00 lacks bus and class support for being resumed. usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected Device driver usbdev4.1_ep81 lacks bus and class support for being resumed. ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.3: irq 17, io mem 0xc0008000 Device driver usbdev5.1_ep00 lacks bus and class support for being resumed. usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected Device driver usbdev5.1_ep81 lacks bus and class support for being resumed. ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 18, io mem 0xc0009000 Device driver usbdev6.1_ep00 lacks bus and class support for being resumed. usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb 2-1: new low speed USB device using ohci_hcd and address 3 Device driver usbdev6.1_ep81 lacks bus and class support for being resumed. ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:05:00.0 to 64 bcm43xx: Chip ID 0x4311, rev 0x1 bcm43xx: Number of cores: 4 bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243 Device driver usbdev2.3_ep00 lacks bus and class support for being resumed. usb 2-1: configuration #1 chosen from 1 choice Device driver usbdev2.3_ep81 lacks bus and class support for being resumed. bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243 bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243 bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243 usbcore: registered new interface driver hiddev bcm43xx: PHY connected bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8 bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) bcm43xx: Radio turned off bcm43xx: Radio turned off Device driver eth1 lacks bus and class support for being resumed. ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 input: HID 062a:0000 as /class/input/input3 input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:13.1-1 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver Adding 1959888k swap on /dev/sda6. Priority:-1 extents:1 across:1959888k EXT3 FS on sda7, internal journal device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com fuse init (API version 7.8) kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. NET: Registered protocol family 17 b44: eth0: Link is up at 100 Mbps, full duplex. b44: eth0: Flow control is off for TX and off for RX. NET: Registered protocol family 10 lo: Disabled Privacy Extensions ACPI: Battery Slot [BAT1] (battery absent) ACPI: AC Adapter [ACAD] (on-line) input: Power Button (FF) as /class/input/input4 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input5 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /class/input/input6 ACPI: Sleep Button (CM) [SLPB] input: Lid Switch as /class/input/input7 ACPI: Lid Switch [LID] ACPI: Thermal Zone [THRM] (56 C) eth0: no IPv6 routers present device-mapper: core: cleaned up shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 unloaded ACPI: PCI interrupt for device 0000:05:00.0 disabled ieee80211_crypt: unregistered algorithm 'NULL' hda-intel: Invalid position buffer, using LPIB read method instead. APIC error on CPU0: 00(40) APIC error on CPU0: 40(40) APIC error on CPU0: 40(40) APIC error on CPU0: 40(40)