Linux version 2.6.22-ARCH (root@Wohnung) (gcc version 4.2.1 20070704 (prerelease)) #1 SMP PREEMPT Thu Aug 2 18:27:37 CEST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS) BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 255MB LOWMEM available. Entering add_active_range(0, 0, 65520) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 65520 HighMem 65520 -> 65520 early_node_map[1] active PFN ranges 0: 0 -> 65520 On node 0 totalpages: 65520 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 479 pages used for memmap Normal zone: 60945 pages, LIFO batch:15 HighMem zone: 0 pages used for memmap DMI 2.2 present. ACPI: RSDP 000F6B30, 0014 (r0 GBT ) ACPI: RSDT 0FFF3000, 0028 (r1 GBT AWRDACPI 42302E31 AWRD 0) ACPI: FACP 0FFF3040, 0074 (r1 GBT AWRDACPI 42302E31 AWRD 0) ACPI: DSDT 0FFF30C0, 224C (r1 GBT AWRDACPI 1000 MSFT 100000C) ACPI: FACS 0FFF0000, 0040 ACPI: PM-Timer IO Port: 0x4008 Allocating PCI resources starting at 20000000 (gap: 10000000:efff0000) Built 1 zonelists. Total pages: 65009 Kernel command line: auto BOOT_IMAGE=arch ro root=341 lapic nmi_watchdog=0 Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! mapped APIC to ffffd000 (fee00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 1024 (order: 10, 4096 bytes) Detected 798.025 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 254924k/262080k available (2392k kernel code, 6704k reserved, 787k data, 304k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff82000 - 0xfffff000 ( 500 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB) lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB) .init : 0xc0421000 - 0xc046d000 ( 304 kB) .data : 0xc03561df - 0xc041b1bc ( 787 kB) .text : 0xc0100000 - 0xc03561df (2392 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1597.75 BogoMIPS (lpj=2662004) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 11k freed Early unpacking initramfs... done ACPI: Core revision 20070126 ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. ACPI: setting ELCR to 0200 (from 1e00) CPU0: Intel Pentium III (Coppermine) stepping 06 SMP motherboard not detected. Brought up 1 CPUs Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb370, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default ACPI: RTC can wake from S4 pnp: 00:00: iomem range 0xf0000-0xf3fff could not be reserved pnp: 00:00: iomem range 0xf4000-0xf7fff could not be reserved pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: d8000000-dfffffff PREFETCH window: 20000000-200fffff PCI: Setting latency timer of device 0000:00:01.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 5, 131072 bytes) TCP bind hash table entries: 8192 (order: 4, 98304 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 600k freed apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: VIA PCI bridge detected. Disabling DAC. Activating ISA DMA hang workarounds. Boot video device is 0000:01:00.0 isapnp: Scanning for PnP cards... Switched to high resolution mode on CPU 0 isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: module loaded input: Macintosh mouse button emulation as /class/input/input0 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Freeing unused kernel memory: 304k freed Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:07.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c596b (rev 12) IDE UDMA66 controller on pci0000:00:07.1 ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: WDC WD2500JB-55REA0, ATA DISK drive hdb: MAXTOR 6L020J1, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: WDC WD2500JB-55REA0, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(66) hda: cache flushes supported hda: unknown partition table hdb: max request size: 128KiB hdb: 40132503 sectors (20547 MB) w/1819KiB Cache, CHS=39813/16/63, UDMA(66) hdb: cache flushes supported hdb: hdb1 hdb2 hdc: max request size: 512KiB hdc: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(66) hdc: cache flushes supported hdc: unknown partition table kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb input: Power Button (FF) as /class/input/input1 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input2 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /class/input/input3 ACPI: Sleep Button (CM) [SLPB] ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 2 throttling states) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Linux agpgart interface v0.102 (c) Dave Jones USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 11, io base 0x0000e400 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected agpgart: Detected VIA Apollo Pro 133 chipset agpgart: AGP aperture is 64M @ 0xe0000000 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12 PCI: setting IRQ 12 as level-triggered ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 12 (level, low) -> IRQ 12 skge 1.11 addr 0xe4000000 irq 12 chip Yukon rev 1 skge eth0: addr 00:0f:38:6a:9c:fe ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 sk98lin: driver has been replaced by the skge driver and is scheduled for removal AC'97 0 analog subsections not ready parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] PPP generic driver version 2.4.2 input: PC Speaker as /class/input/input4 lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver Marking TSC unstable due to: possible TSC halt in C2. Time: acpi_pm clocksource has been installed. md: md0 stopped. EXT3 FS on hdb1, internal journal ReiserFS: hdb2: found reiserfs format "3.6" with standard journal ReiserFS: hdb2: using ordered data mode ReiserFS: hdb2: journal params: device hdb2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hdb2: checking transaction log (hdb2) ReiserFS: hdb2: Using r5 hash to sort names skge eth0: enabling interface skge eth0: Link is up at 1000 Mbps, full duplex, flow control both