# Gigabyte GA-7IXE4
chip "w83782d-*"

#   BIOS labels
 
    label in0 "Vcore"
    label in1 "Vcache"
    label in2 "Vcc3"
    label in3 "+5V"
    label in4 "+12V"
    label in5 "-12V"
    label in6 "-5V"
    label in7 "+5V SB"
    label in8 "Battery"

#   W83782D datasheet

    compute in3 @ * (34 + 50) / 50 , @ * 50 / (34 + 50)
    compute in4 @ * (28 + 10) / 10 , @ * 10 / (28 + 10)
    compute in5 (@ - 3.6) * (232 + 56) / 56 + 3.6 , (@ - 3.6) * 56 / (232 + 56) + 3.6
    compute in6 (@ - 3.6) * (120 + 56) / 56 + 3.6 , (@ - 3.6) * 56 / (120 + 56) + 3.6
    compute in7 @ * (34 + 50) / 50 , @ * 50 / (34 + 50)

#   Duron datasheet, VID. D3 = 1.6 +/- .1, D7 = 1.75 +/- .05 (but do 1.80 +/- 0.05)

    set in0_min 1.75
    set in0_max 1.85

#   Duron datasheet, VCCA. D3 = D7 = 2.5 +/- .25
	
    set in1_min 2.25
    set in1_max 2.75

#   Leave 10% for all

    set in2_min 3.3 * 0.9
    set in2_max 3.3 * 1.1

    set in3_min 5.0 * 0.9
    set in3_max 5.0 * 1.1

    set in4_min 12.0 * 0.9
    set in4_max 12.0 * 1.1

#   20 % for negative voltages

    set in5_min -12.0 * 1.2 
    set in5_max -12.0 * 0.8

    set in6_min -5.0 * 1.2
    set in6_max -5.0 * 0.8

    set in7_min 5.0 * 0.9
    set in7_max 5.0 * 1.1

#   20% for battery

    set in8_min 3.0 * 0.8
    set in8_max 3.0 * 1.2		

    label temp1 "Sys Temp"
    label temp2 "CPU Temp"

    set temp1_over 55
    set temp1_hyst 52
		
#   Have temp2 (CPU) compliant with the BIOS readout
    compute temp2 @-10,@+10
						
    set temp2_over 60 
    set temp2_hyst 57

#   Not connected
    ignore temp3	

    label fan1 "Sys Fan"
    label fan2 "CPU Fan"
    label fan3 "Pow Fan"

    set fan1_div 4 # min RPM = 1.35 x 10^6 / (div * 255) = 1323 (255 == max count)
    set fan2_div 4 # min RPM = 1.35 x 10^6 / (div * 255) = 1323 (255 == max count)
    set fan3_div 4 # min RPM = 1.35 x 10^6 / (div * 255) = 1323 (255 == max count)

    set fan1_min 1500 * 0.9 # 1500 RPM fan
    set fan2_min 2200 * 0.9 # 2200 RPM fan
#   set fan3_min nnnn * 0.9 # nnnn RPM fan

#   No readout on HD (Pow) fan
    ignore fan3

#   0x000001: in0
#   0x000002: in1
#   0x000004: in2
#   0x000008: in3
#   0x000010: temp1
#   0x000020: temp2 (+temp3 on W83781D)
#   0x000040: fan1
#   0x000080: fan2
#   0x000100: in4
#   0x000200: in5
#   0x000400: in6 
#   0x000800: fan3 
#   0x001000: chassis
#   0x002000: temp3 (W83782D and W83627HF only)
#   0x010000: in7 (W83782D and W83627HF only)
#   0x020000: in8 (W83782D and W83627HF only)

    set beeps 198655 # 0x0307ff
    set beep_enable 1