| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 18 Sep 2007 15:08:46 +0100
From: Duncan.Perrett@...kta.com
To: "Linux kernel" <linux-kernel@...r.kernel.org>
Subject: Re: PCI Interrupt
The driver already does that ...
result =
request_irq(irq, can_pci_interrupt, SA_INTERRUPT | SA_SHIRQ,
pDevice->au8IrqName, pDevice);
Any other ideas?
Duncan
"linux-os \(Dick
Johnson\)"
<linux-os@...logi To
c.com> <Duncan.Perrett@...kta.com>
cc
18/09/2007 14:57 "Linux kernel"
<linux-kernel@...r.kernel.org>
Subject
Please respond to Re: PCI Interrupt
"linux-os \(Dick
Johnson\)"
<linux-os@...logi
c.com>
On Tue, 18 Sep 2007 Duncan.Perrett@...kta.com wrote:
>
> I have a CAN PCI card installed on my Ubuntu box.
> I understand that PCI interrupts should be level rather than edge
> triggered.
>
> The output of cat /proc/interrupts is :-
>
> CPU0
> 0: 1614601 IO-APIC-edge timer
> 1: 164 IO-APIC-edge i8042
> 8: 3 IO-APIC-edge rtc
> 9: 1 IO-APIC-level acpi
> 12: 0 IO-APIC-edge CAN-ACx-PCI_01
> 14: 65786 IO-APIC-edge ide0
> 169: 3220 IO-APIC-level eth0, i915@pci:0000:00:02.0
> 177: 46459 IO-APIC-level eth1
> 209: 0 IO-APIC-level uhci_hcd:usb3, eth2
> 217: 2 IO-APIC-level uhci_hcd:usb1, ehci_hcd:usb4
> 225: 697 IO-APIC-level uhci_hcd:usb2
> NMI: 0
> LOC: 1614399
> ERR: 0
> MIS: 0
>
> You see that irq 12 CAN-ACx-PCI_01 is edge triggered.
> Is there any way of forcing the BIOS to see the interrupt as a
> level-triggered one?
It's done in the driver. IRQ12 can be shared, so the driver
needs to request the IRQ as a shared interrupt.
Cheers,
Dick Johnson
Penguin : Linux version 2.6.22.1 on an i686 machine (5588.30 BogoMips).
My book : http://www.AbominableFirebug.com/
_
****************************************************************
The information transmitted in this message is confidential and may be
privileged. Any review, retransmission, dissemination, or other use of
this information by persons or entities other than the intended recipient
is prohibited. If you are not the intended recipient, please notify
Analogic Corporation immediately - by replying to this message or by
sending an email to DeliveryErrors@...logic.com - and destroy all copies of
this information, including any attachments, without reading or disclosing
them.
Thank you.
*******************Internet Email Confidentiality Footer*******************
The contents of this e-mail message (including any attachments hereto) are
confidential to and are intended to be conveyed for the use of the
recipient to whom it is addressed only. If you receive this transmission in
error, please notify the sender of this immediately and delete the message
from your system. Any distribution, reproduction or use of this message by
someone other than recipient is not authorized and may be unlawful.
Elekta Limited is a company registered in England and Wales whose
registered number is 3244454 and whose registered address is Linac House,
Fleming Way, Crawley, West Sussex, RH10 9RR
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists