[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Wed, 10 Oct 2007 09:13:41 -0600
From: Robert Hancock <hancockr@...w.ca>
To: Jim Gifford <maillist@...55.com>
Cc: Kernel <linux-kernel@...r.kernel.org>
Subject: Re: Nvidia SATA - Seagate SATA Drives
Jim Gifford wrote:
> Robert Hancock wrote:
>> Jim Gifford wrote:
>>> Here's the situation. I have a MSI KN8Neo-f motherboard with a
>>> Seagate Barracuda 250 GB SATA drive. I have replaced this drive three
>>> times in the last two weeks due to it failing. Now the only thing in
>>> common is the use of a 2.6.22.9 kernel I built from scratch, before
>>> that I was using 2.6.19 kernel but working on doing some upgrades for
>>> the CLFS project and tried a 2.6.22.9. I will explain the situation
>>> and including the links I used for fix the issues.
>>>
>>> It boots up and instantly has a problem detecting so I have to add
>>> irqpoll to my bootup line. {Reference
>>> http://my.opera.com/snowburn/blog/index.dml/tag/failed%20to%20set%20xfermode}
>>> Then I get the adma issue, so I add sata_nv.adma=0 to my bootup
>>> line.{Reference
>>> http://www.ussg.iu.edu/hypermail/linux/kernel/0706.1/1424.html}
>>>
>>> Now after a few times of booting the drive completely fails. So is
>>> the nv_sata drive the cause?? Based on what I have done yes, and the
>>> reason I can say that is because I took another one of those drives
>>> and the same computer loaded Windows(forgive me for using this
>>> word!!!) on it and it worked perfectly.
>>
>> You'll have to be more specific about "completely fails".. Also, it
>> would be useful to get the dmesg output from dmesg directly and not
>> from syslog, as the entries posted under the second link you gave were
>> missing some critical information (it seems that syslog can do this in
>> some cases..) In particular the line showing what command failed would
>> be useful.
> It never gets into the system at all, just locks up. The hard drive
> starts clicking and eventually doesn't get recognized by BIOS.
That doesn't sound like a kernel problem if it's not even recognized by
the BIOS, there's nothing the kernel should be able to do that could
cause that. Sounds more like a hardware issue. If the drive has been
replaced before then it could be a power supply or temperature problem?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists