[ 177.078312] [ 190.712608] ide-cd: cmd 0x1e timed out [ 190.731121] hdc: lost interrupt [ 0.000000] Linux version 2.6.23-rt1 (root@rok.spina.si) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-27)) #5 SMP PREEMPT RT Sat Oct 13 09:36:19 CEST 2007 [ 0.000000] Command line: ro root=/dev/VolGroup00/LogVol01 netconsole=@192.168.10.124/eth0,9354@192.168.10.1/ nmi_watchdog=2 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) [ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000F7C80, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 3FFB0000, 0034 (r1 A M I OEMRSDT 12000521 MSFT 97) [ 0.000000] ACPI: FACP 3FFB0200, 0084 (r2 A M I OEMFACP 12000521 MSFT 97) [ 0.000000] ACPI: DSDT 3FFB0450, 3CF4 (r1 75D8P 75D8P004 4 INTL 2002026) [ 0.000000] ACPI: FACS 3FFC0000, 0040 [ 0.000000] ACPI: APIC 3FFB0390, 0078 (r1 A M I OEMAPIC 12000521 MSFT 97) [ 0.000000] ACPI: MCFG 3FFB0410, 003C (r1 A M I OEMMCFG 12000521 MSFT 97) [ 0.000000] ACPI: OEMB 3FFC0040, 0046 (r1 A M I AMI_OEM 12000521 MSFT 97) [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 262064 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, address 0xfecc0000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000) [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PERCPU: Allocating 38072 bytes of per cpu data [ 0.000000] Real-Time Preemption Support (C) 2004-2007 Ingo Molnar [ 0.000000] Built 1 zonelists in Zone order. Total pages: 245927 [ 0.000000] Kernel command line: ro root=/dev/VolGroup00/LogVol01 netconsole=@192.168.10.124/eth0,9354@192.168.10.1/ nmi_watchdog=2 [ 0.000000] netconsole: local port 6665 [ 0.000000] netconsole: local IP 192.168.10.124 [ 0.000000] netconsole: interface eth0 [ 0.000000] netconsole: remote port 9354 [ 0.000000] netconsole: remote IP 192.168.10.1 [ 0.000000] netconsole: remote ethernet address ff:ff:ff:ff:ff:ff [ 0.000000] Initializing CPU#0 [ 0.000000] WARNING: experimental RCU implementation. [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 24.186195] time.c: Detected 3139.771 MHz processor. [ 24.189104] Console: colour VGA+ 80x25 [ 24.189109] console [tty0] enabled [ 24.199477] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 24.199738] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 24.199896] ... MAX_LOCK_DEPTH: 30 [ 24.200054] ... MAX_LOCKDEP_KEYS: 2048 [ 24.200224] ... CLASSHASH_SIZE: 1024 [ 24.200382] ... MAX_LOCKDEP_ENTRIES: 16384 [ 24.200540] ... MAX_LOCKDEP_CHAINS: 32768 [ 24.200697] ... CHAINHASH_SIZE: 16384 [ 24.200855] memory used by lock dependency info: 2608 kB [ 24.201018] per task-struct memory footprint: 1680 bytes [ 24.201872] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 24.202620] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 24.202885] Checking aperture... [ 24.240447] Memory: 977344k/1048256k available (3281k kernel code, 70048k reserved, 1787k data, 272k init) [ 24.301099] Calibrating delay using timer specific routine.. 6285.79 BogoMIPS (lpj=3142895) [ 24.301899] Mount-cache hash table entries: 256 [ 24.304136] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 24.304349] CPU: L2 cache: 2048K [ 24.304502] using mwait in idle threads. [ 24.304658] CPU: Physical Processor ID: 0 [ 24.304813] CPU: Processor Core ID: 0 [ 24.304978] CPU0: Thermal monitoring enabled (TM1) [ 24.305188] lockdep: not fixing up alternatives. [ 24.305350] ACPI: Core revision 20070126 [ 24.334335] Using local APIC timer interrupts. [ 24.366341] Detected 13.082 MHz APIC timer. [ 24.369742] lockdep: not fixing up alternatives. [ 24.370164] Booting processor 1/2 APIC 0x1 [ 25.027370] Initializing CPU#1 [ 25.087749] Calibrating delay using timer specific routine.. 6279.44 BogoMIPS (lpj=3139722) [ 25.087767] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 25.087772] CPU: L2 cache: 2048K [ 25.087777] CPU: Physical Processor ID: 0 [ 25.087779] CPU: Processor Core ID: 0 [ 25.087794] CPU1: Thermal monitoring enabled (TM1) [ 25.088309] Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03 [ 24.442078] checking TSC synchronization [CPU#0 -> CPU#1]: [ 24.463713] Measured 2029973108 cycles TSC warp between CPUs, turning off TSC clock. [ 24.463978] Marking TSC unstable due to check_tsc_sync_source failed [ 24.464329] Brought up 2 CPUs [ 24.464700] testing NMI watchdog ... OK. [ 24.487943] NET: Registered protocol family 16 [ 24.489623] ACPI: bus type pci registered [ 24.490404] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved [ 24.490591] PCI: Not using MMCONFIG. [ 24.490748] PCI: Using configuration type 1 [ 24.539703] ACPI: Interpreter enabled [ 24.539864] ACPI: (supports S0 S1 S3 S5) [ 24.540361] ACPI: Using IOAPIC for interrupt routing [ 24.590866] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 24.663431] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 24.664721] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 24.665921] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 24.667057] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 24.668229] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 24.669575] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 24.670914] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 24.672249] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 24.673793] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - C2, should be B5 [20070126] [ 24.674174] Linux Plug and Play Support v0.97 (c) Adam Belay [ 24.674580] pnp: PnP ACPI init [ 24.674800] ACPI: bus type pnp registered [ 24.695023] pnp: PnP ACPI: found 14 devices [ 24.695186] ACPI: ACPI bus type pnp unregistered [ 25.343063] SCSI subsystem initialized [ 25.344849] PCI: Using ACPI for IRQ routing [ 25.345008] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 24.708172] Bluetooth: Core ver 2.11 [ 24.708835] NET: Registered protocol family 31 [ 24.708995] Bluetooth: HCI device and connection manager initialized [ 24.709220] Bluetooth: HCI socket layer initialized [ 24.709454] PCI-GART: No AMD northbridge found. [ 24.709701] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 24.710059] hpet0: 3 32-bit timers, 14318180 Hz [ 25.366130] pnp: 00:08: iomem range 0xfec00000-0xfec00fff has been reserved [ 25.366333] pnp: 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved [ 25.366633] pnp: 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 25.366875] pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 25.367048] pnp: 00:0d: iomem range 0xc0000-0xcffff has been reserved [ 25.367224] pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 25.367401] pnp: 00:0d: iomem range 0x100000-0x3fffffff could not be reserved [ 24.724173] PCI: Bridge: 0000:00:01.0 [ 24.724329] IO window: disabled. [ 24.724518] MEM window: disabled. [ 24.724678] PREFETCH window: disabled. [ 24.724840] PCI: Bridge: 0000:00:02.0 [ 24.724993] IO window: disabled. [ 24.725151] MEM window: f1e00000-fbefffff [ 24.725312] PREFETCH window: cff00000-dfefffff [ 24.725583] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27 [ 24.726063] NET: Registered protocol family 2 [ 25.401081] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 25.402799] TCP established hash table entries: 16384 (order: 9, 3014656 bytes) [ 25.408711] TCP bind hash table entries: 16384 (order: 9, 2883584 bytes) [ 25.413974] TCP: Hash tables configured (established 16384 bind 16384) [ 25.414252] TCP reno registered [ 24.781085] checking if image is initramfs... it is [ 25.148173] Freeing initrd memory: 3677k freed [ 25.808178] Initializing RT-Tester: OK [ 25.163168] Total HugeTLB memory allocated, 0 [ 25.810569] VFS: Disk quotas dquot_6.5.1 [ 25.810794] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 25.166431] io scheduler noop registered [ 25.166591] io scheduler anticipatory registered [ 25.168162] io scheduler deadline registered [ 25.168414] io scheduler cfq registered (default) [ 25.168600] PCI: VIA PCI bridge detected. Disabling DAC. [ 25.171419] PCI: Bypassing VIA 8237 APIC De-Assert Message [ 25.172765] assign_interrupt_mode Found MSI capability [ 25.174919] vga16fb: mapped to 0xffff8100000a0000 [ 25.412953] Console: switching to colour frame buffer device 80x30 [ 25.661618] fb0: VGA16 VGA frame buffer device [ 25.666028] input: Power Button (FF) as /devices/virtual/input/input0 [ 25.669634] ACPI: Power Button (FF) [PWRF] [ 25.674184] input: Power Button (CM) as /devices/virtual/input/input1 [ 25.678945] ACPI: Power Button (CM) [PWRB] [ 25.685820] ACPI: SSDT 3FFB4150, 02FC (r1 AMI CPU1PM 1 INTL 2002026) [ 25.699680] ACPI Warning (tbutils-0217): Incorrect checksum in table [SSDT] - AE, should be 57 [20070126] [ 25.716642] ACPI: SSDT 3FFB4450, 02FC (r1 AMI CPU2PM 1 INTL 2002026) [ 25.737589] ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126] [ 25.749800] ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126] [ 25.885565] Real Time Clock Driver v1.12ac [ 25.902834] Linux agpgart interface v0.102 [ 25.917872] Serial: 8250/16550 driver $Revision: 1.90 $ 16 ports, IRQ sharing enabled [ 25.951240] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 26.623010] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 25.996535] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 26.683545] 0000:00:09.0: ttyS4 at I/O 0xd000 (irq = 17) is a 16550A [ 26.059824] 0000:00:09.0: ttyS5 at I/O 0xcc00 (irq = 17) is a 16550A [ 26.081265] 0000:00:09.0: ttyS6 at I/O 0xc480 (irq = 17) is a 16550A [ 26.102209] 0000:00:09.0: ttyS7 at I/O 0xc400 (irq = 17) is a 16550A [ 26.122730] 0000:00:09.0: ttyS8 at I/O 0xc080 (irq = 17) is a 16550A [ 26.143318] 0000:00:09.0: ttyS9 at I/O 0xc000 (irq = 17) is a 16550A [ 26.167947] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize [ 26.208394] loop: module loaded [ 26.227255] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 26.245954] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 26.285233] eth0: VIA Rhine II at 0xfbfffc00, 00:13:8f:27:34:8c, IRQ 23. [ 26.305773] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. [ 26.343912] netconsole: device eth0 not up yet, forcing it [ 26.364229] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 26.426981] netconsole: carrier detect appears untrustworthy, waiting 4 seconds [ 30.476904] console [netcon0] enabled [ 34.463786] netconsole: network logging started [ 34.466191] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 34.466211] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 34.467094] megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007 [ 34.469608] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 34.472410] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 34.474939] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 34.478914] mice: PS/2 mouse device common for all mice [ 34.502813] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 34.511006] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 34.512980] Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 2007 UTC). [ 34.522966] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22 [ 34.669507] logips2pp: Detected unknown logitech mouse model 127 [ 35.045556] ALSA device list: [ 35.066790] #0: VIA 8237 with ALC850 at 0xe400, irq 22 [ 35.089932] TCP cubic registered [ 35.111455] Initializing XFRM netlink socket [ 35.132464] NET: Registered protocol family 1 [ 35.787214] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input3 [ 35.195152] NET: Registered protocol family 17 [ 35.870659] ***************************************************************************** [ 35.264125] * * [ 35.301890] * REMINDER, the following debugging options are turned on in your .config: * [ 35.340547] * * [ 35.340551] * CONFIG_DEBUG_RT_MUTEXES * [ 35.340620] * CONFIG_DEBUG_SLAB * [ 35.340624] * CONFIG_LOCKDEP * [ 35.340627] * * [ 35.340629] * they may increase runtime overhead and latencies. * [ 35.340632] * * [ 35.340635] ***************************************************************************** [ 35.340640] Freeing unused kernel memory: 272k freed [ 36.082628] usbcore: registered new interface driver usbfs [ 36.095018] usbcore: registered new interface driver hub [ 36.107068] usbcore: registered new device driver usb [ 36.137452] USB Universal Host Controller Interface driver v3.0 [ 36.150123] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 36.175876] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 36.191751] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 36.866368] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000ec00 [ 36.883947] usb usb1: configuration #1 chosen from 1 choice [ 36.899234] hub 1-0:1.0: USB hub found [ 36.268595] hub 1-0:1.0: 2 ports detected [ 37.042790] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21 [ 37.073551] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 37.089768] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 36.476214] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e080 [ 36.495231] usb usb2: configuration #1 chosen from 1 choice [ 37.159884] hub 2-0:1.0: USB hub found [ 37.178369] hub 2-0:1.0: 2 ports detected [ 37.248589] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 37.302584] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21 [ 36.695635] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 36.716955] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 36.758096] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e000 [ 36.780278] usb usb3: configuration #1 chosen from 1 choice [ 36.801141] hub 3-0:1.0: USB hub found [ 37.449193] usb 1-1: configuration #1 chosen from 1 choice [ 37.488794] hub 3-0:1.0: 2 ports detected [ 36.964412] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21 [ 37.005822] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 37.027185] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 37.069661] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000dc00 [ 37.091902] usb usb4: configuration #1 chosen from 1 choice [ 37.113286] hub 4-0:1.0: USB hub found [ 37.134395] hub 4-0:1.0: 2 ports detected [ 37.311890] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21 [ 37.352668] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 37.373117] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 [ 37.412736] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfbfff800 [ 37.432823] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 37.474395] usb usb5: configuration #1 chosen from 1 choice [ 37.494798] hub 5-0:1.0: USB hub found [ 37.515105] hub 5-0:1.0: 8 ports detected [ 37.641177] usb 1-1: USB disconnect, address 2 [ 37.741279] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20 [ 37.778751] sata_via 0000:00:0f.0: routed to hard irq line 7 [ 38.444787] scsi0 : sata_via [ 37.817555] scsi1 : sata_via [ 37.835771] ata1: SATA max UDMA/133 cmd 0x000000000001d880 ctl 0x000000000001d802 bmdma 0x000000000001d080 irq 20 [ 37.872525] ata2: SATA max UDMA/133 cmd 0x000000000001d480 ctl 0x000000000001d402 bmdma 0x000000000001d088 irq 20 [ 38.116771] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 38.847087] usb 5-7: new high speed USB device using ehci_hcd and address 3 [ 38.957404] ata1.00: ATA-6: WDC WD2000JD-00KLB0, 08.05J08, max UDMA/100 [ 38.331116] ata1.00: 390721968 sectors, multi 16: LBA48 [ 38.987230] usb 5-7: configuration #1 chosen from 1 choice [ 39.020413] ata1.00: configured for UDMA/100 [ 39.197990] usb 1-1: new full speed USB device using uhci_hcd and address 3 [ 38.593642] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 38.637311] scsi 0:0:0:0: Direct-Access ATA WDC WD2000JD-00K 08.0 PQ: 0 ANSI: 5 [ 38.677306] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) [ 38.697331] sd 0:0:0:0: [sda] Write Protect is off [ 38.717766] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 39.389268] usb 1-1: configuration #1 chosen from 1 choice [ 38.782598] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) [ 38.803899] sd 0:0:0:0: [sda] Write Protect is off [ 38.824455] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 38.866034] sda: sda1 sda2 sda3 [ 38.904125] sd 0:0:0:0: [sda] Attached SCSI disk [ 41.503094] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 41.521962] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 41.610373] Initializing USB Mass Storage driver... [ 41.629652] scsi2 : SCSI emulation for USB Mass Storage devices [ 42.294397] usbcore: registered new interface driver usb-storage [ 41.665966] USB Mass Storage support registered. [ 47.295655] scsi 2:0:0:0: Direct-Access Generic USB Storage-CFC I19A PQ: 0 ANSI: 0 CCS [ 46.699811] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 46.718586] scsi 2:0:0:1: Direct-Access Generic USB Storage-SDC I19A PQ: 0 ANSI: 0 CCS [ 46.755166] sd 2:0:0:1: [sdc] 494080 512-byte hardware sectors (253 MB) [ 46.773791] sd 2:0:0:1: [sdc] Write Protect is off [ 46.791483] sd 2:0:0:1: [sdc] Assuming drive cache: write through [ 46.815888] sd 2:0:0:1: [sdc] 494080 512-byte hardware sectors (253 MB) [ 46.833882] sd 2:0:0:1: [sdc] Write Protect is off [ 46.851125] sd 2:0:0:1: [sdc] Assuming drive cache: write through [ 46.868483] sdc: sdc1 [ 46.889825] sd 2:0:0:1: [sdc] Attached SCSI removable disk [ 46.909026] scsi 2:0:0:2: Direct-Access Generic USB Storage-SMC I19A PQ: 0 ANSI: 0 CCS [ 46.948708] sd 2:0:0:2: [sdd] Attached SCSI removable disk [ 46.969266] scsi 2:0:0:3: Direct-Access Generic USB Storage-MSC I19A PQ: 0 ANSI: 0 CCS [ 47.009862] sd 2:0:0:3: [sde] Attached SCSI removable disk [ 50.331658] kjournald starting. Commit interval 5 seconds [ 50.979221] EXT3-fs: mounted filesystem with ordered data mode. [ 185.600900] hdc: lost interrupt [ 222.420462] stopped custom tracer. [ 221.774206] NMI show regs on CPU#0: [ 221.774210] apic_timer_irqs: 69292 [ 221.774213] CPU 0: [ 221.774215] Modules linked in: nfsd exportfs lockd nfs_acl sunrpc w83627hf hwmon_vid rfcomm l2cap ipv6 floppy ide_cd cdrom tuner parport_pc parport i2c_viapro bttv video_buf ir_common compat_ioctl32 i2c_algo_bit btcx_risc tveeprom i2c_core hci_usb via82cxxx videodev v4l2_common v4l1_compat sg usb_storage generic ide_core ata_generic sata_via libata ehci_hcd ohci_hcd uhci_hcd usbcore [ 221.774257] Pid: 0, comm: swapper Not tainted 2.6.23-rt1 #5 [ 221.774260] RIP: 0010:[] [] mwait_idle+0x61/0x6b [ 221.774272] RSP: 0018:ffffffff80735f48 EFLAGS: 00000246 [ 221.774275] RAX: 0000000000000000 RBX: ffffffff80735f48 RCX: 0000000000000000 [ 221.774278] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff80697760 [ 221.774281] RBP: ffffffff80735ee8 R08: 0000000000000001 R09: 0000000000000000 [ 221.774284] R10: 0000000000000001 R11: 0000000000000002 R12: ffffffff8025bee6 [ 221.774287] R13: ffffffff80735eb8 R14: 0000000000000046 R15: ffffffff80697760 [ 221.774291] FS: 0000000000000000(0000) GS:ffffffff806f4280(0000) knlGS:0000000000000000 [ 221.774295] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [ 221.774297] CR2: 00002ba31e3eb000 CR3: 000000003c159000 CR4: 00000000000006e0 [ 221.774301] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 221.774304] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 221.774307] [ 221.774308] Call Trace: [ 221.774312] [] mwait_idle+0x58/0x6b [ 221.774318] [] cpu_idle+0x81/0xef [ 221.774327] [] rest_init+0x75/0x84 [ 221.774380] [] start_kernel+0x2d4/0x38f [ 221.774421] [] _sinittext+0x111/0x150 [ 221.774452] [ 221.774543] INFO: lockdep is turned off. [ 221.774582] --------------------------- [ 221.774585] | preempt count: 00000002 ] [ 221.774587] | 2-level deep critical section nesting: [ 221.774592] ---------------------------------------- [ 221.774595] .. [] .... cpu_idle+0xbd/0xef [ 221.774600] .....[] .. ( <= rest_init+0x75/0x84) [ 221.774605] .. [] .... __spin_lock+0x16/0x3e [ 221.774610] .....[] .. ( <= irq_show_regs_callback+0x33/0x72) [ 221.774614] [ 223.156787] NMI Watchdog detected LOCKUP on CPU 1 [ 223.173795] CPU 1 [ 223.190714] Modules linked in: nfsd exportfs lockd nfs_acl sunrpc w83627hf hwmon_vid rfcomm l2cap ipv6 floppy ide_cd cdrom tuner parport_pc parport i2c_viapro bttv video_buf ir_common compat_ioctl32 i2c_algo_bit btcx_risc tveeprom i2c_core hci_usb via82cxxx videodev v4l2_common v4l1_compat sg usb_storage generic ide_core ata_generic sata_via libata ehci_hcd ohci_hcd uhci_hcd usbcore [ 223.286834] Pid: 3321, comm: lockup Not tainted 2.6.23-rt1 #5 [ 223.304037] RIP: 0033:[<00000000004004ac>] [<00000000004004ac>] [ 223.321411] RSP: 002b:00007fff0cff8870 EFLAGS: 00003017 [ 223.338752] RAX: 0000000000000000 RBX: 00002b909dcc9bc0 RCX: 00002b909dd9be57 [ 223.356230] RDX: 00007fff0cff8968 RSI: 00007fff0cff8958 RDI: 0000000000000003 [ 223.374296] RBP: 00007fff0cff8870 R08: 00002b909e017270 R09: 00002b909dabc530 [ 223.392575] R10: 0000000000000000 R11: 0000000000003202 R12: 0000000000000000 [ 223.411437] R13: 00007fff0cff8950 R14: 0000000000000000 R15: 0000000000000000 [ 223.430467] FS: 00002b909e01c6f0(0000) GS:ffff81003ff8e858(0000) knlGS:0000000000000000 [ 223.468917] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 223.488993] CR2: 00002b909dcfb3d0 CR3: 0000000028022000 CR4: 00000000000006e0 [ 223.509580] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 223.530658] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 223.551895] Process lockup (pid: 3321, threadinfo ffff810027602000, task ffff810033fdc940) [ 223.594978] [ 223.616405] BUG: sleeping function called from invalid context lockup(3321) at kernel/rtmutex.c:637 [ 223.660807] in_atomic():1 [00010000], irqs_disabled():1 [ 223.683341] INFO: lockdep is turned off. [ 223.705476] irq event stamp: 7459 [ 223.727818] hardirqs last enabled at (7459): [] trace_hardirqs_on+0xd/0xf [ 223.773266] hardirqs last disabled at (7458): [] trace_hardirqs_off+0xd/0xf [ 223.818723] softirqs last enabled at (0): [] copy_process+0x51c/0x174a [ 223.864754] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 223.888433] [ 223.888434] Call Trace: [ 223.934292] [] __might_sleep+0xed/0x132 [ 223.957450] [] __rt_spin_lock+0x30/0x3f [ 223.980156] [] rt_spin_lock+0x30/0x37 [ 224.002566] [] __wake_up+0x1c/0x5d [ 224.024723] [] wake_up_klogd+0x35/0x37 [ 224.046449] [] bust_spinlocks+0x28/0x34 [ 224.068190] [] oops_end+0x1d/0x77 [ 224.089599] [] die_nmi+0x5c/0x90 [ 224.110581] [] nmi_watchdog_tick+0x221/0x252 [ 224.131308] [] default_do_nmi+0x53/0x1a6 [ 224.151612] [] do_nmi+0x4b/0x81 [ 224.171488] [] nmi+0x7f/0x80 [ 224.191305] <> [ 224.210762] INFO: lockdep is turned off. [ 224.229639] --------------------------- [ 224.248686] | preempt count: 00010000 ] [ 224.267138] | 0-level deep critical section nesting: [ 224.285213] ---------------------------------------- [ 224.303156]