[ 0.000000] Linux version 2.6.23-l162 (bschubert@lanczos) (gcc version 3.4.6 (Ubuntu 3.4.6-5ubuntu1)) #7 SMP Mon Oct 15 11:50:28 CEST 2007 [ 0.000000] Command line: root=/dev/ram0 ramdisk_size=110592 console=tty0 console=ttyS0,115200 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000fbff0000 (usable) [ 0.000000] BIOS-e820: 00000000fbff0000 - 00000000fbfff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fbfff000 - 00000000fc000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000400000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 1032176) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 4194304) 2 entries of 3200 used [ 0.000000] end_pfn_map = 4194304 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000F6F20, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT FBFF0000, 0038 (r1 A M I OEMRSDT 7000626 MSFT 97) [ 0.000000] ACPI: FACP FBFF0200, 0081 (r1 A M I OEMFACP 7000626 MSFT 97) [ 0.000000] ACPI: DSDT FBFF0410, 3751 (r1 0AAAA 0AAAA000 0 INTL 2002026) [ 0.000000] ACPI: FACS FBFFF000, 0040 [ 0.000000] ACPI: APIC FBFF0380, 0084 (r1 A M I OEMAPIC 7000626 MSFT 97) [ 0.000000] ACPI: OEMB FBFFF040, 0041 (r1 A M I OEMBIOS 7000626 MSFT 97) [ 0.000000] ACPI: SRAT FBFF3B70, 0110 (r1 A M I OEMSRAT 7000626 MSFT 97) [ 0.000000] ACPI: ASF! FBFF3C80, 0086 (r1 AMIASF AMDSTRET 1 INTL 2002026) [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 1 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 100000-fc000000 [ 0.000000] Entering add_active_range(0, 256, 1032176) 0 entries of 3200 used [ 0.000000] SRAT: Node 1 PXM 1 200000000-400000000 [ 0.000000] Entering add_active_range(1, 2097152, 4194304) 1 entries of 3200 used [ 0.000000] SRAT: Node 0 PXM 0 100000-200000000 [ 0.000000] Entering add_active_range(0, 256, 1032176) 2 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 2097152) 2 entries of 3200 used [ 0.000000] SRAT: Node 0 PXM 0 0-200000000 [ 0.000000] Entering add_active_range(0, 0, 159) 3 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 1032176) 4 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 2097152) 4 entries of 3200 used [ 0.000000] NUMA: Using 33 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-0000000200000000 [ 0.000000] Bootmem setup node 1 0000000200000000-0000000400000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 4194304 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 1032176 [ 0.000000] 0: 1048576 -> 2097152 [ 0.000000] 1: 2097152 -> 4194304 [ 0.000000] On node 0 totalpages: 2080655 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1451 pages reserved [ 0.000000] DMA zone: 2492 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 1013800 pages, LIFO batch:31 [ 0.000000] Normal zone: 14336 pages used for memmap [ 0.000000] Normal zone: 1034240 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] On node 1 totalpages: 2097152 [ 0.000000] DMA zone: 0 pages used for memmap [ 0.000000] DMA32 zone: 0 pages used for memmap [ 0.000000] Normal zone: 28672 pages used for memmap [ 0.000000] Normal zone: 2068480 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfebff000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, address 0xfebff000, GSI 24-27 [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfebfe000] gsi_base[28]) [ 0.000000] IOAPIC[2]: apic_id 4, address 0xfebfe000, GSI 28-31 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at fc400000 (gap: fc000000:3780000) [ 0.000000] .eh_frame_hdr for 'kernel' present but unusable [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PERCPU: Allocating 32872 bytes of per cpu data [ 0.000000] Built 2 zonelists in Zone order. Total pages: 4119012 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/ram0 ramdisk_size=110592 console=tty0 console=ttyS0,115200 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 114.643908] time.c: Detected 1992.367 MHz processor. [ 114.648062] Console: colour VGA+ 80x25 [ 114.648065] console [tty0] enabled [ 114.660503] console [ttyS0] enabled [ 115.061441] Checking aperture... [ 115.064821] CPU 0: aperture @ 4000000 size 32 MB [ 115.069609] Aperture too small (32 MB) [ 115.080187] No AGP bridge found [ 115.083491] Your BIOS doesn't leave a aperture memory hole [ 115.089157] Please enable the IOMMU option in the BIOS setup [ 115.094996] This costs you 64 MB of RAM [ 115.129197] Mapping aperture over 65536 KB of RAM @ 4000000 [ 115.657704] Memory: 16368744k/16777216k available (3104k kernel code, 342484k reserved, 1703k data, 320k init) [ 115.668042] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=2 [ 115.751854] Calibrating delay using timer specific routine.. 3988.62 BogoMIPS (lpj=7977257) [ 115.761773] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 115.781701] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 115.795079] Mount-cache hash table entries: 256 [ 115.799928] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 115.807258] CPU: L2 Cache: 1024K (64 bytes/line) [ 115.812046] CPU 0/0 -> Node 0 [ 115.815186] SMP alternatives: switching to UP code [ 115.820804] ACPI: Core revision 20070126 [ 115.866967] Using local APIC timer interrupts. [ 115.921673] result 12452292 [ 115.924622] Detected 12.452 MHz APIC timer. [ 115.931591] SMP alternatives: switching to SMP code [ 115.937126] Booting processor 1/2 APIC 0x1 [ 115.951486] Initializing CPU#1 [ 116.031323] Calibrating delay using timer specific routine.. 3984.78 BogoMIPS (lpj=7969570) [ 116.031332] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 116.031334] CPU: L2 Cache: 1024K (64 bytes/line) [ 116.031337] CPU 1/1 -> Node 1 [ 116.031467] AMD Opteron(tm) Processor 246 stepping 0a [ 116.035345] Brought up 2 CPUs [ 116.073142] NET: Registered protocol family 16 [ 116.077915] ACPI: bus type pci registered [ 116.082208] PCI: Using configuration type 1 [ 116.091900] ACPI: EC: Look up EC in DSDT [ 116.095037] ACPI: Interpreter enabled [ 116.098858] ACPI: (supports S0 S1 S5) [ 116.102917] ACPI: Using IOAPIC for interrupt routing [ 116.113996] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 116.119869] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 116.119937] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 116.120018] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLA._PRT] [ 116.120113] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLB._PRT] [ 116.122439] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 116.130993] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 116.139545] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 116.148099] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 116.156662] Linux Plug and Play Support v0.97 (c) Adam Belay [ 116.162529] pnp: PnP ACPI init [ 116.165778] ACPI: bus type pnp registered [ 116.173458] pnp: PnP ACPI: found 15 devices [ 116.177812] ACPI: ACPI bus type pnp unregistered [ 116.182789] SCSI subsystem initialized [ 116.186738] libata version 2.21 loaded. [ 116.186886] PCI: Using ACPI for IRQ routing [ 116.191261] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 116.231015] PCI-DMA: Disabling AGP. [ 116.235147] PCI-DMA: aperture base @ 4000000 size 65536 KB [ 116.240820] PCI-DMA: using GART IOMMU. [ 116.244738] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 116.267017] pnp: 00:0a: ioport range 0x680-0x6ff has been reserved [ 116.273381] pnp: 00:0a: ioport range 0x295-0x296 has been reserved [ 116.279745] pnp: 00:0a: ioport range 0x778-0x77f has been reserved [ 116.286109] pnp: 00:0a: ioport range 0xb78-0xb7f has been reserved [ 116.292466] pnp: 00:0a: ioport range 0xf78-0xf7f has been reserved [ 116.298834] pnp: 00:0d: ioport range 0xca0-0xcaf has been reserved [ 116.305199] pnp: 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved [ 116.312350] pnp: 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved [ 116.319916] pnp: 00:0d: iomem range 0xfff80000-0xffffffff could not be reserved [ 116.327484] pnp: 00:0d: iomem range 0xff780000-0xff7fffff could not be reserved [ 116.335054] pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 116.341680] pnp: 00:0e: iomem range 0xc0000-0xdffff has been reserved [ 116.348307] pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 116.355281] pnp: 00:0e: iomem range 0x100000-0xfbffffff could not be reserved [ 116.362943] PCI: Bridge: 0000:00:06.0 [ 116.366718] Time: acpi_pm clocksource has been installed. [ 116.372341] IO window: 9000-bfff [ 116.375907] MEM window: fc900000-feafffff [ 116.380256] PREFETCH window: disabled. [ 116.384344] PCI: Bridge: 0000:00:0a.0 [ 116.388169] IO window: disabled. [ 116.391730] MEM window: fc800000-fc8fffff [ 116.396081] PREFETCH window: ff500000-ff5fffff [ 116.400869] PCI: Bridge: 0000:00:0b.0 [ 116.404691] IO window: disabled. [ 116.408250] MEM window: disabled. [ 116.411900] PREFETCH window: disabled. [ 116.416058] NET: Registered protocol family 2 [ 116.462865] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 116.476537] TCP established hash table entries: 2097152 (order: 13, 50331648 bytes) [ 116.519246] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 116.526767] TCP: Hash tables configured (established 2097152 bind 65536) [ 116.533653] TCP reno registered [ 116.546520] checking if image is initramfs...it isn't (no cpio magic); looks like an initrd [ 118.007208] Freeing initrd memory: 41021k freed [ 118.037873] VFS: Disk quotas dquot_6.5.1 [ 118.042028] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 118.049125] io scheduler noop registered [ 118.053215] io scheduler deadline registered (default) [ 118.058587] io scheduler cfq registered [ 118.062599] PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for 0000:00:0a.0 subordinate bus. [ 118.071598] AMD8131 rev 12 detected, disabling PCI-X MMRBC [ 118.077277] PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for 0000:00:0b.0 subordinate bus. [ 118.086269] AMD8131 rev 12 detected, disabling PCI-X MMRBC [ 118.092882] Boot video device is 0000:03:06.0 [ 118.119406] hpet_acpi_add: no address or irqs in _CRS [ 118.124703] AMD768 RNG detected [ 118.128499] Linux agpgart interface v0.102 [ 118.132759] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 118.140906] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 118.147480] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 118.154102] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 118.160032] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 118.166014] Floppy drive(s): fd0 is 1.44M [ 118.191199] FDC 0 is a post-1991 82077 [ 118.196725] RAMDISK driver initialized: 16 RAM disks of 110592K size 1024 blocksize [ 118.204932] loop: module loaded [ 118.208235] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 [ 118.214417] Copyright (c) 1999-2006 Intel Corporation. [ 118.219799] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI [ 118.226078] e100: Copyright(c) 1999-2006 Intel Corporation [ 118.231832] tg3.c:v3.81 (September 5, 2007) [ 118.236202] ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 24 (level, low) -> IRQ 24 [ 118.270915] eth0: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000Base-T Ethernet 00:e0:81:2b:91:4a [ 118.283405] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 118.291152] eth0: dma_rwctrl[769f4000] dma_mask[64-bit] [ 118.296570] ACPI: PCI Interrupt 0000:02:09.1[B] -> GSI 25 (level, low) -> IRQ 25 [ 118.337338] eth1: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000Base-T Ethernet 00:e0:81:2b:91:4b [ 118.349827] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 118.357567] eth1: dma_rwctrl[769f4000] dma_mask[64-bit] [ 118.363091] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. [ 118.371119] sata_sil 0000:03:05.0: version 2.3 [ 118.371171] ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 118.379382] scsi0 : sata_sil [ 118.382496] scsi1 : sata_sil [ 118.385586] scsi2 : sata_sil [ 118.388685] scsi3 : sata_sil [ 118.391789] ata1: SATA max UDMA/100 cmd 0xffffc20004d4ac80 ctl 0xffffc20004d4ac8a bmdma 0xffffc20004d4ac00 irq 19 [ 118.402344] ata2: SATA max UDMA/100 cmd 0xffffc20004d4acc0 ctl 0xffffc20004d4acca bmdma 0xffffc20004d4ac08 irq 19 [ 118.412886] ata3: SATA max UDMA/100 cmd 0xffffc20004d4ae80 ctl 0xffffc20004d4ae8a bmdma 0xffffc20004d4ae00 irq 19 [ 118.423428] ata4: SATA max UDMA/100 cmd 0xffffc20004d4aec0 ctl 0xffffc20004d4aeca bmdma 0xffffc20004d4ae08 irq 19 [ 118.746253] ata1: SATA link down (SStatus 0 SControl 310) [ 119.065650] ata2: SATA link down (SStatus 0 SControl 310) [ 119.540775] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 119.715051] ata3.00: ATA-7: ST3250820AS, 3.AAC, max UDMA/133 [ 119.720896] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 119.789857] ata3.00: configured for UDMA/100 [ 120.107695] ata4: SATA link down (SStatus 0 SControl 310) [ 120.113359] scsi 2:0:0:0: Direct-Access ATA ST3250820AS 3.AA PQ: 0 ANSI: 5 [ 120.121823] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 120.129153] sd 2:0:0:0: [sda] Write Protect is off [ 120.134117] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 120.134131] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 120.143487] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 120.150816] sd 2:0:0:0: [sda] Write Protect is off [ 120.155772] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 120.155785] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 120.165105] sda: sda1 sda2 sda3 [ 120.188930] sd 2:0:0:0: [sda] Attached SCSI disk [ 120.193959] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 120.200324] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 120.210587] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 120.215763] mice: PS/2 mouse device common for all mice [ 120.221239] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 120.230097] oprofile: using NMI interrupt. [ 120.234372] TCP cubic registered [ 120.237762] NET: Registered protocol family 1 [ 120.242285] NET: Registered protocol family 17 [ 120.275750] input: AT Translated Set 2 keyboard as /class/input/input0 [ 120.351314] RAMDISK: Compressed image found at block 0 [ 122.022214] VFS: Mounted root (ext2 filesystem) readonly. [ 122.027810] Freeing unused kernel memory: 320k freed [ 122.411934] ACPI: Processor [CPU1] (supports 8 throttling states) [ 122.418811] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] [ 122.429596] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] [ 122.512126] EDAC MC: Ver: 2.1.0 Oct 15 2007 [ 122.535388] pata_amd 0000:00:07.1: version 0.3.9 [ 122.551700] scsi4 : pata_amd [ 122.556552] usbcore: registered new interface driver usbfs [ 122.557169] scsi5 : pata_amd [ 122.557220] ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001ffa0 irq 14 [ 122.557223] ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001ffa8 irq 15 [ 122.587473] usbcore: registered new interface driver hub [ 122.601842] usbcore: registered new device driver usb [ 122.617149] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 122.870859] ata5.00: ATAPI: QSI CD-ROM SCR-242, CXAC, max UDMA/33 [ 123.034541] ata5.00: configured for UDMA/33 [ 123.209599] scsi 4:0:0:0: CD-ROM QSI CD-ROM SCR-242 CXAC PQ: 0 ANSI: 5 [ 123.219087] EDAC MC0: Giving out device to 'k8_edac' 'Athlon64/Opteron': DEV 0000:00:18.2 [ 123.228109] EDAC PCI0: Giving out device to module 'k8_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) [ 123.240297] EDAC MC1: Giving out device to 'k8_edac' 'Athlon64/Opteron': DEV 0000:00:19.2 [ 123.249295] ACPI: PCI Interrupt 0000:03:00.0[D] -> GSI 19 (level, low) -> IRQ 19 [ 123.257796] ohci_hcd 0000:03:00.0: OHCI Host Controller [ 123.265955] ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1 [ 123.274154] ohci_hcd 0000:03:00.0: irq 19, io mem 0xfeafc000 [ 123.339774] usb usb1: configuration #1 chosen from 1 choice [ 123.345952] hub 1-0:1.0: USB hub found [ 123.350140] hub 1-0:1.0: 3 ports detected [ 123.461475] ACPI: PCI Interrupt 0000:03:00.1[D] -> GSI 19 (level, low) -> IRQ 19 [ 123.469952] ohci_hcd 0000:03:00.1: OHCI Host Controller [ 123.475794] ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 2 [ 123.483993] ohci_hcd 0000:03:00.1: irq 19, io mem 0xfeafd000 [ 123.551350] usb usb2: configuration #1 chosen from 1 choice [ 123.557509] hub 2-0:1.0: USB hub found [ 123.561690] hub 2-0:1.0: 3 ports detected [ 123.687627] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 123.693485] scsi 4:0:0:0: Attached scsi generic sg1 type 5 [ 123.932540] usb 2-2: new full speed USB device using ohci_hcd and address 2 [ 123.998960] Real Time Clock Driver v1.12ac [ 124.113162] usb 2-2: configuration #1 chosen from 1 choice [ 124.128282] usbcore: registered new interface driver usbserial [ 124.134695] drivers/usb/serial/usb-serial.c: USB Serial support registered for generic [ 124.143496] usbcore: registered new interface driver usbserial_generic [ 124.150640] drivers/usb/serial/usb-serial.c: USB Serial Driver core [ 124.158844] w83627hf: Found W83627HF chip at 0x290 [ 124.167540] drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303 [ 124.176218] pl2303 2-2:1.0: pl2303 converter detected [ 124.182958] usb 2-2: pl2303 converter now attached to ttyUSB0 [ 124.190363] usbcore: registered new interface driver pl2303 [ 124.196580] drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver [ 127.525919] tg3: eth0: Link is up at 1000 Mbps, full duplex. [ 127.531978] tg3: eth0: Flow control is off for TX and off for RX. [ 136.766030] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 136.773917] sd 2:0:0:0: [sda] Write Protect is off [ 136.779229] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 136.779247] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 136.789232] sda: sda1 sda2 sda3 [ 139.812179] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 139.820030] sd 2:0:0:0: [sda] Write Protect is off [ 139.825347] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 139.825365] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 139.835312] sda: sda1 sda2 sda3 [ 142.861469] ReiserFS: sda1: found reiserfs format "3.6" with standard journal [ 142.870083] ReiserFS: sda1: using ordered data mode [ 142.880261] ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 142.896826] ReiserFS: sda1: checking transaction log (sda1) [ 142.919220] ReiserFS: sda1: Using r5 hash to sort names [ 143.330225] ReiserFS: sda1: found reiserfs format "3.6" with standard journal [ 143.337841] ReiserFS: sda1: using ordered data mode [ 143.343314] ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 143.359638] ReiserFS: sda1: checking transaction log (sda1) [ 143.376333] ReiserFS: sda1: Using r5 hash to sort names [ 143.396521] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled [ 143.407882] SGI XFS Quota Management subsystem [ 143.461049] XFS mounting filesystem sda3 [ 143.562173] Ending clean XFS mount for filesystem: sda3 [ 147.325573] fuse init (API version 7.8)