| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 14 Oct 2007 23:07:38 -0600
From: Jim Cromie <jim.cromie@...il.com>
To: Linux kernel <linux-kernel@...r.kernel.org>,
LM Sensors <lm-sensors@...sensors.org>
Subject: [ patch .24-rc0 3/5 ] SuperIO locks coordinator - use in hwmon/pc87360
03 - use superio-locks in drivers/hwmon/pc87360
this driver keeps the slot for only during __init, since it
only needs the sio-port to read the ISA addresses of the
Logical Devices in the chip, which are then used exclusively.
Signed-off-by: Jim Cromie <jim.cromie@...il.com>
---
hwmon-superio-pc87360
Kconfig | 1
pc87360.c | 73 +++++++++++++++++++++++++-------------------------------------
2 files changed, 31 insertions(+), 43 deletions(-)
diff -ruNp -X dontdiff -X exclude-diffs hwmon-fan-push-offset/drivers/hwmon/Kconfig hwmon-superio.old/drivers/hwmon/Kconfig
--- hwmon-fan-push-offset/drivers/hwmon/Kconfig 2007-10-14 13:00:24.000000000 -0600
+++ hwmon-superio.old/drivers/hwmon/Kconfig 2007-10-14 17:22:23.000000000 -0600
@@ -489,6 +495,7 @@ config SENSORS_MAX6650
config SENSORS_PC87360
tristate "National Semiconductor PC87360 family"
select HWMON_VID
+ select SUPERIO_LOCKS
help
If you say yes here you get access to the hardware monitoring
functions of the National Semiconductor PC8736x Super-I/O chips.
diff -ruNp -X dontdiff -X exclude-diffs hwmon-fan-push-offset/drivers/hwmon/pc87360.c hwmon-superio.old/drivers/hwmon/pc87360.c
--- hwmon-fan-push-offset/drivers/hwmon/pc87360.c 2007-10-14 13:00:24.000000000 -0600
+++ hwmon-superio.old/drivers/hwmon/pc87360.c 2007-10-14 17:22:23.000000000 -0600
@@ -41,6 +41,7 @@
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon-vid.h>
+#include <linux/superio-locks.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <asm/io.h>
@@ -64,10 +65,14 @@ MODULE_PARM_DESC(init,
*/
#define DEV 0x07 /* Register: Logical device select */
-#define DEVID 0x20 /* Register: Device ID */
#define ACT 0x30 /* Register: Device activation */
#define BASE 0x60 /* Register: Base address */
+static __devinit struct superio_search where = {
+ .cmdreg_addrs = { 0x2E, 0x4E },
+ .device_ids = { 0xE1, 0xE8, 0xE4, 0xE5, 0xE9, 0 },
+};
+
#define FSCM 0x09 /* Logical device: fans */
#define VLM 0x0d /* Logical device: voltages */
#define TMS 0x0e /* Logical device: temperatures */
@@ -77,24 +82,6 @@ static const u8 logdev[3] = { FSCM, VLM,
#define LD_IN 1
#define LD_TEMP 2
-static inline void superio_outb(int sioaddr, int reg, int val)
-{
- outb(reg, sioaddr);
- outb(val, sioaddr+1);
-}
-
-static inline int superio_inb(int sioaddr, int reg)
-{
- outb(reg, sioaddr);
- return inb(sioaddr+1);
-}
-
-static inline void superio_exit(int sioaddr)
-{
- outb(0x02, sioaddr);
- outb(0x02, sioaddr+1);
-}
-
/*
* Logical devices
*/
@@ -817,17 +804,22 @@ static DEVICE_ATTR(name, S_IRUGO, show_n
* Device detection, registration and update
*/
-static int __init pc87360_find(int sioaddr, u8 *devid, unsigned short *addresses)
+static int __init pc87360_find(unsigned short *addresses)
{
u16 val;
- int i;
- int nrdev; /* logical device count */
+ int i, nrdev; /* logical device count */
- /* No superio_enter */
+ struct superio* const gate = superio_find(&where);
+ if (!gate) {
+ printk(KERN_WARNING "pc87360: superio port not detected, "
+ "module not intalled.\n");
+ return -ENODEV;
+ }
+ superio_enter(gate);
+ devid = gate->devid; /* Remember the device id */
/* Identify device */
- val = superio_inb(sioaddr, DEVID);
- switch (val) {
+ switch (devid) {
case 0xE1: /* PC87360 */
case 0xE8: /* PC87363 */
case 0xE4: /* PC87364 */
@@ -838,25 +830,23 @@ static int __init pc87360_find(int sioad
nrdev = 3;
break;
default:
- superio_exit(sioaddr);
+ superio_exit(gate);
return -ENODEV;
}
- /* Remember the device id */
- *devid = val;
for (i = 0; i < nrdev; i++) {
/* select logical device */
- superio_outb(sioaddr, DEV, logdev[i]);
+ superio_select(gate, logdev[i]);
- val = superio_inb(sioaddr, ACT);
+ val = superio_inb(gate, ACT);
if (!(val & 0x01)) {
printk(KERN_INFO "pc87360: Device 0x%02x not "
"activated\n", logdev[i]);
continue;
}
- val = (superio_inb(sioaddr, BASE) << 8)
- | superio_inb(sioaddr, BASE + 1);
+ val = (superio_inb(gate, BASE) << 8)
+ | superio_inb(gate, BASE + 1);
if (!val) {
printk(KERN_INFO "pc87360: Base address not set for "
"device 0x%02x\n", logdev[i]);
@@ -866,8 +856,8 @@ static int __init pc87360_find(int sioad
addresses[i] = val;
if (i==0) { /* Fans */
- confreg[0] = superio_inb(sioaddr, 0xF0);
- confreg[1] = superio_inb(sioaddr, 0xF1);
+ confreg[0] = superio_inb(gate, 0xF0);
+ confreg[1] = superio_inb(gate, 0xF1);
#ifdef DEBUG
printk(KERN_DEBUG "pc87360: Fan 1: mon=%d "
@@ -882,12 +872,12 @@ static int __init pc87360_find(int sioad
#endif
} else if (i==1) { /* Voltages */
/* Are we using thermistors? */
- if (*devid == 0xE9) { /* PC87366 */
+ if (devid == 0xE9) { /* PC87366 */
/* These registers are not logical-device
specific, just that we won't need them if
we don't use the VLM device */
- confreg[2] = superio_inb(sioaddr, 0x2B);
- confreg[3] = superio_inb(sioaddr, 0x25);
+ confreg[2] = superio_inb(gate, 0x2B);
+ confreg[3] = superio_inb(gate, 0x25);
if (confreg[2] & 0x40) {
printk(KERN_INFO "pc87360: Using "
@@ -903,7 +893,8 @@ static int __init pc87360_find(int sioad
}
}
- superio_exit(sioaddr);
+ superio_exit(gate);
+ superio_release(gate); /* not needed for any post-load operations */
return 0;
}
@@ -1449,12 +1440,8 @@ static int __init pc87360_init(void)
int err, i;
unsigned short address = 0;
- if (pc87360_find(0x2e, &devid, extra_isa)
- && pc87360_find(0x4e, &devid, extra_isa)) {
- printk(KERN_WARNING "pc87360: PC8736x not detected, "
- "module not inserted.\n");
+ if (pc87360_find(extra_isa))
return -ENODEV;
- }
/* Arbitrarily pick one of the addresses */
for (i = 0; i < 3; i++) {
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists