[ 0.000000] Linux version 2.6.23-git8 (root@localhost) (gcc version 4.1.2 (Gentoo 4.1.2)) #1 SMP Mon Oct 15 21:11:09 PDT 2007 [ 0.000000] Command line: root=/dev/hda1 vga=0x315 video=vesafb:mtrr:3,ywrap [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000077fc0000 (usable) [ 0.000000] BIOS-e820: 0000000077fc0000 - 0000000077fce000 (ACPI data) [ 0.000000] BIOS-e820: 0000000077fce000 - 0000000077ff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000077ff0000 - 0000000078000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 491456) 1 entries of 256 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000FB870, 0024 (r2 ACPIAM) [ 0.000000] ACPI: XSDT 77FC0100, 0044 (r1 A M I OEMXSDT 10000626 MSFT 97) [ 0.000000] ACPI: FACP 77FC0290, 00F4 (r3 A M I OEMFACP 10000626 MSFT 97) [ 0.000000] ACPI: DSDT 77FC0440, 5688 (r1 A0368 A0368001 1 INTL 2002026) [ 0.000000] ACPI: FACS 77FCE000, 0040 [ 0.000000] ACPI: APIC 77FC0390, 0070 (r1 A M I OEMAPIC 10000626 MSFT 97) [ 0.000000] ACPI: MCFG 77FC0400, 003C (r1 A M I OEMMCFG 10000626 MSFT 97) [ 0.000000] ACPI: OEMB 77FCE040, 005B (r1 A M I AMI_OEM 10000626 MSFT 97) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 491456) 1 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 491456 [ 0.000000] On node 0 totalpages: 491359 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 2109 pages reserved [ 0.000000] DMA zone: 1834 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6663 pages used for memmap [ 0.000000] DMA32 zone: 480697 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x508 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 78000000:86c00000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 28832 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order. Total pages: 482531 [ 0.000000] Kernel command line: root=/dev/hda1 vga=0x315 video=vesafb:mtrr:3,ywrap [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC calibrated against PM_TIMER [ 25.753330] Marking TSC unstable due to TSCs unsynchronized [ 25.753331] time.c: Detected 2611.894 MHz processor. [ 25.753375] Console: colour dummy device 80x25 [ 25.753380] console [tty0] enabled [ 25.753423] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 25.753425] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 25.753427] ... MAX_LOCK_DEPTH: 30 [ 25.753429] ... MAX_LOCKDEP_KEYS: 2048 [ 25.753430] ... CLASSHASH_SIZE: 1024 [ 25.753432] ... MAX_LOCKDEP_ENTRIES: 8192 [ 25.753434] ... MAX_LOCKDEP_CHAINS: 16384 [ 25.753436] ... CHAINHASH_SIZE: 8192 [ 25.753437] memory used by lock dependency info: 1648 kB [ 25.753439] per task-struct memory footprint: 1680 bytes [ 25.754392] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 25.755896] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 25.756074] Checking aperture... [ 25.756077] CPU 0: aperture @ 9050000000 size 32 MB [ 25.756079] Aperture too small (32 MB) [ 25.764920] No AGP bridge found [ 25.781975] Memory: 1926784k/1965824k available (2601k kernel code, 38632k reserved, 1279k data, 212k init) [ 25.859304] Calibrating delay using timer specific routine.. 5229.86 BogoMIPS (lpj=10459737) [ 25.859398] Mount-cache hash table entries: 256 [ 25.859771] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 25.859774] CPU: L2 Cache: 1024K (64 bytes/line) [ 25.859777] CPU: Physical Processor ID: 0 [ 25.859778] CPU: Processor Core ID: 0 [ 25.859798] lockdep: not fixing up alternatives. [ 25.859801] ACPI: Core revision 20070126 [ 25.903351] Using local APIC timer interrupts. [ 25.941638] APIC timer calibration result 12557173 [ 25.941639] Detected 12.557 MHz APIC timer. [ 25.941955] lockdep: not fixing up alternatives. [ 25.942034] Booting processor 1/2 APIC 0x1 [ 25.952164] Initializing CPU#1 [ 26.029683] Calibrating delay using timer specific routine.. 5223.79 BogoMIPS (lpj=10447587) [ 26.029688] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 26.029690] CPU: L2 Cache: 1024K (64 bytes/line) [ 26.029692] CPU: Physical Processor ID: 0 [ 26.029693] CPU: Processor Core ID: 1 [ 26.029798] Dual Core AMD Opteron(tm) Processor 185 stepping 02 [ 26.029810] Brought up 2 CPUs [ 26.029932] CPU0 attaching sched-domain: [ 26.029934] domain 0: span 3 [ 26.029936] groups: 1 2 [ 26.029940] CPU1 attaching sched-domain: [ 26.029941] domain 0: span 3 [ 26.029943] groups: 2 1 [ 26.030263] net_namespace: 120 bytes [ 26.030440] NET: Registered protocol family 16 [ 26.030665] ACPI: bus type pci registered [ 26.030782] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved [ 26.030785] PCI: Not using MMCONFIG. [ 26.030787] PCI: Using configuration type 1 [ 26.033496] ACPI: EC: Look up EC in DSDT [ 26.038787] ACPI: Interpreter enabled [ 26.038791] ACPI: (supports S0 S1 S3 S5) [ 26.038814] ACPI: Using IOAPIC for interrupt routing [ 26.048416] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 26.050241] PCI: Transparent bridge - 0000:00:10.0 [ 26.050301] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 26.050539] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE0._PRT] [ 26.050627] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE1._PRT] [ 26.050715] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 26.050829] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 26.062106] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *5 [ 26.062308] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5 [ 26.062507] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 26.062706] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *5 [ 26.062904] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. [ 26.063109] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled. [ 26.063306] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *11 [ 26.063504] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled. [ 26.063702] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5 [ 26.063900] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *5 [ 26.064097] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5 [ 26.064294] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *5 [ 26.064492] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled. [ 26.064690] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled. [ 26.064890] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5 [ 26.065088] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10 [ 26.065286] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11 [ 26.065484] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10 [ 26.065721] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 26.065862] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - CB, should be BE [20070126] [ 26.065870] Linux Plug and Play Support v0.97 (c) Adam Belay [ 26.065907] pnp: PnP ACPI init [ 26.065925] ACPI: bus type pnp registered [ 26.071195] pnp: PnP ACPI: found 15 devices [ 26.071198] ACPI: ACPI bus type pnp unregistered [ 26.071413] SCSI subsystem initialized [ 26.071569] PCI: Using ACPI for IRQ routing [ 26.071572] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 26.097680] pnp: 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved [ 26.097684] pnp: 00:07: iomem range 0xfeb80000-0xfebbffff has been reserved [ 26.097687] pnp: 00:07: iomem range 0xfee01000-0xfeefffff has been reserved [ 26.097694] pnp: 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved [ 26.097699] pnp: 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved [ 26.097707] pnp: 00:0c: ioport range 0x290-0x297 has been reserved [ 26.097714] pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 26.097722] pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 26.097724] pnp: 00:0e: iomem range 0xc0000-0xcffff has been reserved [ 26.097728] pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 26.097731] pnp: 00:0e: iomem range 0x100000-0x7fffffff could not be reserved [ 26.098348] PCI: Bridge: 0000:00:02.0 [ 26.098351] IO window: disabled. [ 26.098355] MEM window: disabled. [ 26.098358] PREFETCH window: disabled. [ 26.098361] PCI: Bridge: 0000:00:03.0 [ 26.098363] IO window: disabled. [ 26.098366] MEM window: disabled. [ 26.098369] PREFETCH window: disabled. [ 26.098372] PCI: Bridge: 0000:00:04.0 [ 26.098374] IO window: disabled. [ 26.098377] MEM window: disabled. [ 26.098380] PREFETCH window: disabled. [ 26.098384] PCI: Bridge: 0000:00:10.0 [ 26.098387] IO window: c000-cfff [ 26.098392] MEM window: faa00000-faafffff [ 26.098396] PREFETCH window: disabled. [ 26.098413] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 26.098423] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 26.098433] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 26.098445] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 26.098479] NET: Registered protocol family 2 [ 26.101634] Time: acpi_pm clocksource has been installed. [ 26.133690] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 26.134098] TCP established hash table entries: 65536 (order: 10, 4194304 bytes) [ 26.141522] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) [ 26.148654] TCP: Hash tables configured (established 65536 bind 65536) [ 26.148686] TCP reno registered [ 26.159404] Total HugeTLB memory allocated, 0 [ 26.159860] io scheduler noop registered [ 26.159863] io scheduler anticipatory registered (default) [ 26.159866] io scheduler deadline registered [ 26.159881] io scheduler cfq registered [ 26.159901] Boot video device is 0000:00:05.0 [ 26.186540] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 26.186583] assign_interrupt_mode Found MSI capability [ 26.186619] Allocate Port Service[0000:00:02.0:pcie00] [ 26.186721] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 26.186762] assign_interrupt_mode Found MSI capability [ 26.186790] Allocate Port Service[0000:00:03.0:pcie00] [ 26.186885] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 26.186925] assign_interrupt_mode Found MSI capability [ 26.186954] Allocate Port Service[0000:00:04.0:pcie00] [ 26.187253] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000080000, using 3750k, total 131072k [ 26.187257] vesafb: mode is 800x600x32, linelength=3200, pages=1 [ 26.187259] vesafb: scrolling: redraw [ 26.187261] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 26.192397] Console: switching to colour frame buffer device 100x37 [ 26.196889] fb0: VESA VGA frame buffer device [ 26.237097] Real Time Clock Driver v1.12ac [ 26.237297] Linux agpgart interface v0.102 [ 26.237402] [drm] Initialized drm 1.1.0 20060810 [ 26.237486] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 26.237579] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 26.237777] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0 [ 26.237892] NFORCE-MCP51: chipset revision 161 [ 26.237956] NFORCE-MCP51: not 100% native mode: will probe irqs later [ 26.238054] NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller [ 26.238148] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio [ 26.238264] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio [ 26.239273] Probing IDE interface ide0... [ 27.197788] hda: SAMSUNG SP2514N, ATA DISK drive [ 27.198856] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 27.198951] hda: selected mode 0x45 [ 27.199144] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 27.200324] Probing IDE interface ide1... [ 27.765724] hda: max request size: 512KiB [ 27.773226] hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100) [ 27.774733] hda: cache flushes supported [ 27.776135] hda: hda1 hda2 hda3 [ 27.780583] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 27.784487] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 27.786029] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 27.787748] mice: PS/2 mouse device common for all mice [ 27.808482] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 28.481064] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1 [ 28.485790] EDAC MC: Ver: 2.1.0 Oct 15 2007 [ 28.487899] TCP cubic registered [ 28.489808] NET: Registered protocol family 1 [ 28.491815] NET: Registered protocol family 10 [ 28.493997] IPv6 over IPv4 tunneling driver [ 28.496342] NET: Registered protocol family 17 [ 28.498440] powernow-k8: Found 1 Dual Core AMD Opteron(tm) Processor 185 processors (2 cpu cores) (version 2.00.00) [ 28.502964] powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8 [ 28.505323] powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa [ 28.507680] powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc [ 28.510076] powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe [ 28.512404] powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10 [ 28.514685] powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12 [ 28.517561] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 28.527904] kjournald starting. Commit interval 5 seconds [ 28.528054] EXT3-fs: mounted filesystem with ordered data mode. [ 28.528074] VFS: Mounted root (ext3 filesystem) readonly. [ 28.528090] Freeing unused kernel memory: 212k freed [ 28.537431] Write protecting the kernel read-only data: 1036k [ 28.622874] WARNING: at kernel/lockdep.c:2658 check_flags() [ 28.625132] [ 28.625133] Call Trace: [ 28.629491] [] __lock_acquire+0x3d8/0x1160 [ 28.631734] [] check_flags+0xd9/0x1a0 [ 28.633925] [] lock_acquire+0x62/0xe0 [ 28.636108] [] __lock_acquire+0x3d8/0x1160 [ 28.638290] [] __atomic_notifier_call_chain+0x51/0xa0 [ 28.640459] [] do_page_fault+0xc9/0x920 [ 28.642580] [] _spin_unlock+0x17/0x20 [ 28.644701] [] vma_link+0xd2/0x150 [ 28.646771] [] __lock_acquire+0x3d8/0x1160 [ 28.648808] [] error_exit+0x0/0xa9 [ 28.650866] [] __clear_user+0x46/0x80 [ 28.652914] [] padzero+0x24/0x30 [ 28.654885] [] load_elf_binary+0xb1a/0x2200 [ 28.656817] [] __lock_acquire+0x3d8/0x1160 [ 28.658695] [] dump_trace+0x206/0x2c0 [ 28.660568] [] follow_page+0x227/0x260 [ 28.662438] [] mark_lock+0x1b1/0x670 [ 28.664334] [] __lock_acquire+0x3d8/0x1160 [ 28.666235] [] search_binary_handler+0xb2/0x240 [ 28.668148] [] search_binary_handler+0x93/0x240 [ 28.669972] [] load_elf_binary+0x0/0x2200 [ 28.671727] [] search_binary_handler+0x9b/0x240 [ 28.673477] [] do_execve+0x1ad/0x1e0 [ 28.675246] [] sys_execve+0x44/0xc0 [ 28.677017] [] fd_install+0x2f/0x60 [ 28.678802] [] kernel_execve+0x64/0xd0 [ 28.680614] [] init_post+0x9f/0xf0 [ 28.682446] [] kernel_init+0x247/0x340 [ 28.684251] [] trace_hardirqs_on+0xda/0x190 [ 28.686041] [] trace_hardirqs_on_thunk+0x35/0x3a [ 28.687798] [] trace_hardirqs_on+0xda/0x190 [ 28.689524] [] child_rip+0xa/0x12 [ 28.691229] [] restore_args+0x0/0x30 [ 28.692909] [] kernel_init+0x0/0x340 [ 28.694560] [] child_rip+0x0/0x12 [ 28.696186] [ 28.697798] irq event stamp: 607167 [ 28.699408] hardirqs last enabled at (607167): [] _spin_unlock_irqrestore+0x55/0x70 [ 28.702857] hardirqs last disabled at (607166): [] _spin_lock_irqsave+0x1a/0x50 [ 28.704744] softirqs last enabled at (605894): [] call_softirq+0x1c/0x30 [ 28.706633] softirqs last disabled at (605889): [] call_softirq+0x1c/0x30 [ 30.531015] input: Power Button (FF) as /devices/virtual/input/input2 [ 30.531034] ACPI: Power Button (FF) [PWRF] [ 30.531104] input: Power Button (CM) as /devices/virtual/input/input3 [ 30.531119] ACPI: Power Button (CM) [PWRB] [ 30.535412] Floppy drive(s): fd0 is 1.44M [ 30.553636] FDC 0 is a post-1991 82077 [ 30.559764] usbcore: registered new interface driver usbfs [ 30.559787] usbcore: registered new interface driver hub [ 30.559812] usbcore: registered new device driver usb [ 30.560502] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 30.560823] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 30.560835] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 23 [ 30.561099] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 30.561106] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 30.561331] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 [ 30.561354] ohci_hcd 0000:00:0b.0: irq 23, io mem 0xfebde000 [ 30.568269] libata version 3.00 loaded. [ 30.569578] parport_pc 00:06: reported by Plug and Play ACPI [ 30.569726] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 30.573411] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. [ 30.578155] Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled [ 30.578303] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 30.588573] 8139too Fast Ethernet driver 0.9.28 [ 30.620639] usb usb1: configuration #1 chosen from 1 choice [ 30.620663] hub 1-0:1.0: USB hub found [ 30.620674] hub 1-0:1.0: 8 ports detected [ 30.665640] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 30.721790] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 [ 30.721802] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 22 [ 30.721808] PCI: Setting latency timer of device 0000:00:14.0 to 64 [ 30.721816] forcedeth: using HIGHDMA [ 31.241389] eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:14.0 [ 31.241535] sata_nv 0000:00:0e.0: version 3.5 [ 31.241822] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 [ 31.241834] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LSA0] -> GSI 21 (level, low) -> IRQ 21 [ 31.242093] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 31.242579] scsi0 : sata_nv [ 31.243239] scsi1 : sata_nv [ 31.243307] ata1: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe000 irq 21 [ 31.243310] ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xe008 irq 21 [ 31.708831] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 31.873015] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-H62N, CL00, max UDMA/100 [ 32.044992] ata1.00: configured for UDMA/100 [ 32.356722] ata2: SATA link down (SStatus 0 SControl 300) [ 32.370871] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H62N CL00 PQ: 0 ANSI: 5 [ 32.371216] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 [ 32.371227] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LSA1] -> GSI 20 (level, low) -> IRQ 20 [ 32.371509] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 32.371599] scsi2 : sata_nv [ 32.371899] scsi3 : sata_nv [ 32.371966] ata3: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 20 [ 32.371969] ata4: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 20 [ 32.680676] ata3: SATA link down (SStatus 0 SControl 300) [ 33.000626] ata4: SATA link down (SStatus 0 SControl 300) [ 33.011842] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19 [ 33.011853] ACPI: PCI Interrupt 0000:04:05.0[A] -> Link [LNKD] -> GSI 19 (level, low) -> IRQ 19 [ 33.064085] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[faaef800-faaeffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 33.069562] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18 [ 33.069577] ACPI: PCI Interrupt 0000:04:09.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ 18 [ 33.069940] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23 [ 33.069946] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 23 (level, low) -> IRQ 23 [ 33.070101] PCI: Setting latency timer of device 0000:00:0b.1 to 64 [ 33.070107] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 33.070160] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 [ 33.070202] ehci_hcd 0000:00:0b.1: debug port 1 [ 33.070207] PCI: cache line size of 64 is not supported by device 0000:00:0b.1 [ 33.070213] ehci_hcd 0000:00:0b.1: irq 23, io mem 0xfebdfc00 [ 33.070228] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 33.070354] usb usb2: configuration #1 chosen from 1 choice [ 33.070379] hub 2-0:1.0: USB hub found [ 33.070385] hub 2-0:1.0: 8 ports detected [ 33.070772] eth1: RealTek RTL8139 at 0xffffc20000022400, 00:00:c5:b3:0e:f2, IRQ 18 [ 33.070776] eth1: Identified 8139 chip type 'RTL-8139B' [ 33.074803] udev: renamed network interface eth1 to eth2 [ 33.097496] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 33.097501] Uniform CD-ROM driver Revision: 3.20 [ 33.097549] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 33.155293] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 33.173077] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 [ 33.173082] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 22 (level, low) -> IRQ 22 [ 33.173384] PCI: Setting latency timer of device 0000:00:10.1 to 64 [ 33.204773] ALSA sound/pci/hda/hda_intel.c:695: codec_mask = 0x1 [ 33.207861] ALSA sound/pci/hda/hda_codec.c:1827: hda_codec: model '3stack' is selected for config 10de:cb84 (ASUS A8N-VM) [ 33.783227] EXT3 FS on hda1, internal journal [ 34.340520] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000068024c] [ 40.350758] eth2: link down [ 40.357220] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 49.094426] eth0: no IPv6 routers present [ 181.254674] nvidia: module license 'NVIDIA' taints kernel. [ 181.510074] ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 17 [ 181.510087] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNEC] -> GSI 17 (level, low) -> IRQ 17 [ 181.510094] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 181.510189] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.19 Wed Sep 12 14:08:38 PDT 2007