lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Date:	Thu, 20 Dec 2007 02:20:54 +0100
From:	Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
To:	linux-ide@...r.kernel.org
Cc:	linux-kernel@...r.kernel.org
Subject: [PATCH 36/63] ide-cd: move VERBOSE_IDE_CD_ERRORS code to ide-cd_verbose.c


* Rename ide-cd kernel module to ide-cd_mod in preparation to moving code out
  from ide-cd.[c,h].   Add MODULE_ALIAS("ide-cd") to preserve compatibility.

* Move VERBOSE_IDE_CD_ERRORS code from ide-cd.[c,h] to ide-cd_verbose.c.

  ide-cd_verbose.c is IDE subsystem independent and may be easily converted
  into generic library usable by other drivers (i.e. libata) if needed.

* Add CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS config option to drivers/ide/Kconfig
  replacing VERBOSE_IDE_CD_ERRORS define.  Make this config option enabled by
  default and visible only if CONFIG_EMBEDDED is defined.

before the patch:
   text    data     bss     dec     hex filename
  22841     360    1056   24257    5ec1 drivers/ide/ide-cd.o

after the patch w/ CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y:
   text    data     bss     dec     hex filename
  22857     360    1056   24273    5ed1 drivers/ide/ide-cd_mod.o

after the patch w/ CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=n:
   text    data     bss     dec     hex filename
  15091     360    1056   16507    407b drivers/ide/ide-cd_mod.o

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
---
 drivers/ide/Kconfig          |    9 +
 drivers/ide/Makefile         |    4 
 drivers/ide/ide-cd.c         |  124 --------------
 drivers/ide/ide-cd.h         |  237 ----------------------------
 drivers/ide/ide-cd_verbose.c |  359 +++++++++++++++++++++++++++++++++++++++++++
 5 files changed, 375 insertions(+), 358 deletions(-)

Index: b/drivers/ide/Kconfig
===================================================================
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -206,6 +206,15 @@ config BLK_DEV_IDECD
 	  To compile this driver as a module, choose M here: the
 	  module will be called ide-cd.
 
+config BLK_DEV_IDECD_VERBOSE_ERRORS
+	bool "Verbose error logging for IDE/ATAPI CDROM driver" if EMBEDDED
+	depends on BLK_DEV_IDECD
+	default y
+	help
+	  Turn this on to have the driver print out the meanings of the
+	  ATAPI error codes.  This will use up additional 8kB of kernel-space
+	  memory, though.
+
 config BLK_DEV_IDETAPE
 	tristate "Include IDE/ATAPI TAPE support (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
Index: b/drivers/ide/Makefile
===================================================================
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -40,8 +40,10 @@ obj-$(CONFIG_BLK_DEV_IDEPNP)		+= ide-pnp
 obj-$(CONFIG_IDE_H8300)			+= h8300/
 obj-$(CONFIG_IDE_GENERIC)		+= ide-generic.o
 
+ide-cd_mod-y += ide-cd.o ide-cd_verbose.o
+
 obj-$(CONFIG_BLK_DEV_IDEDISK)		+= ide-disk.o
-obj-$(CONFIG_BLK_DEV_IDECD)		+= ide-cd.o
+obj-$(CONFIG_BLK_DEV_IDECD)		+= ide-cd_mod.o
 obj-$(CONFIG_BLK_DEV_IDETAPE)		+= ide-tape.o
 obj-$(CONFIG_BLK_DEV_IDEFLOPPY)		+= ide-floppy.o
 
Index: b/drivers/ide/ide-cd.c
===================================================================
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -199,129 +199,8 @@ void cdrom_analyze_sense_data(ide_drive_
 			}
  		}
  	}
-#if VERBOSE_IDE_CD_ERRORS
-	{
-		int i;
-		const char *s = "bad sense key!";
-		char buf[80];
-
-		printk(KERN_ERR "ATAPI device %s:\n", drive->name);
-		if (sense->error_code == 0x70)
-			printk(KERN_CONT "  Error: ");
-		else if (sense->error_code == 0x71)
-			printk("  Deferred Error: ");
-		else if (sense->error_code == 0x7f)
-			printk(KERN_CONT "  Vendor-specific Error: ");
-		else
-			printk(KERN_CONT "  Unknown Error Type: ");
-
-		if (sense->sense_key < ARRAY_SIZE(sense_key_texts))
-			s = sense_key_texts[sense->sense_key];
-
-		printk(KERN_CONT "%s -- (Sense key=0x%02x)\n",
-				 s, sense->sense_key);
-
-		if (sense->asc == 0x40) {
-			sprintf(buf, "Diagnostic failure on component 0x%02x",
-				sense->ascq);
-			s = buf;
-		} else {
-			int lo = 0, mid, hi = ARRAY_SIZE(sense_data_texts);
-			unsigned long key = (sense->sense_key << 16);
-
-			key |= (sense->asc << 8);
-			if (!(sense->ascq >= 0x80 && sense->ascq <= 0xdd))
-				key |= sense->ascq;
-			s = NULL;
-
-			while (hi > lo) {
-				mid = (lo + hi) / 2;
-				if (sense_data_texts[mid].asc_ascq == key ||
-				    sense_data_texts[mid].asc_ascq == (0xff0000|key)) {
-					s = sense_data_texts[mid].text;
-					break;
-				} else if (sense_data_texts[mid].asc_ascq > key)
-					hi = mid;
-				else
-					lo = mid + 1;
-			}
-		}
-
-		if (s == NULL) {
-			if (sense->asc > 0x80)
-				s = "(vendor-specific error)";
-			else
-				s = "(reserved error code)";
-		}
-
-		printk(KERN_ERR "  %s -- (asc=0x%02x, ascq=0x%02x)\n",
-				s, sense->asc, sense->ascq);
-
-		if (failed_command != NULL) {
-			int lo = 0, mid, hi = ARRAY_SIZE(packet_command_texts);
-			s = NULL;
-
-			while (hi > lo) {
-				mid = (lo + hi) / 2;
-				if (packet_command_texts[mid].packet_command ==
-				    failed_command->cmd[0]) {
-					s = packet_command_texts[mid].text;
-					break;
-				}
-				if (packet_command_texts[mid].packet_command >
-				    failed_command->cmd[0])
-					hi = mid;
-				else
-					lo = mid + 1;
-			}
-
-			printk(KERN_ERR "  The failed \"%s\" packet command "
-					"was: \n  \"", s);
-			for (i = 0; i < sizeof(failed_command->cmd); i++)
-				printk(KERN_CONT "%02x ",
-						 failed_command->cmd[i]);
-			printk(KERN_CONT "\"\n");
-		}
-
-		/* The SKSV bit specifies validity of the sense_key_specific
-		 * in the next two commands. It is bit 7 of the first byte.
-		 * In the case of NOT_READY, if SKSV is set the drive can
-		 * give us nice ETA readings.
-		 */
-		if (sense->sense_key == NOT_READY && (sense->sks[0] & 0x80)) {
-			int progress = (sense->sks[1] << 8 | sense->sks[2]) * 100;
-
-			printk(KERN_ERR "  Command is %02d%% complete\n",
-					progress / 0xffff);
-		}
-
-		if (sense->sense_key == ILLEGAL_REQUEST &&
-		    (sense->sks[0] & 0x80) != 0) {
-			printk(KERN_ERR "  Error in %s byte %d",
-					(sense->sks[0] & 0x40) != 0 ?
-					"command packet" : "command data",
-					(sense->sks[1] << 8) + sense->sks[2]);
-
-			if ((sense->sks[0] & 0x40) != 0)
-				printk(KERN_CONT " bit %d",
-						 sense->sks[0] & 0x07);
-
-			printk(KERN_CONT "\n");
-		}
-	}
-#else /* not VERBOSE_IDE_CD_ERRORS */
-	/* Suppress printing unit attention and `in progress of becoming ready'
-	   errors when we're not being verbose. */
-	if (sense->sense_key == UNIT_ATTENTION ||
-	    (sense->sense_key == NOT_READY && (sense->asc == 4 ||
-						sense->asc == 0x3a)))
-		return;
 
-	printk(KERN_ERR "%s: error code: 0x%02x  sense_key: 0x%02x  "
-			"asc: 0x%02x  ascq: 0x%02x\n",
-			drive->name, sense->error_code, sense->sense_key,
-			sense->asc, sense->ascq);
-#endif /* not VERBOSE_IDE_CD_ERRORS */
+	ide_cd_log_error(drive->name, failed_command, sense);
 }
 
 /*
@@ -3168,6 +3047,7 @@ static int __init ide_cdrom_init(void)
 }
 
 MODULE_ALIAS("ide:*m-cdrom*");
+MODULE_ALIAS("ide-cd");
 module_init(ide_cdrom_init);
 module_exit(ide_cdrom_exit);
 MODULE_LICENSE("GPL");
Index: b/drivers/ide/ide-cd.h
===================================================================
--- a/drivers/ide/ide-cd.h
+++ b/drivers/ide/ide-cd.h
@@ -10,14 +10,6 @@
 #include <linux/cdrom.h>
 #include <asm/byteorder.h>
 
-/* Turn this on to have the driver print out the meanings of the
-   ATAPI error codes.  This will use up additional kernel-space
-   memory, though. */
-
-#ifndef VERBOSE_IDE_CD_ERRORS
-#define VERBOSE_IDE_CD_ERRORS 1
-#endif
-
 /*
  * typical timeout for packet command
  */
@@ -153,232 +145,7 @@ struct cdrom_info {
 	unsigned long write_timeout;
 };
 
-/****************************************************************************
- * Descriptions of ATAPI error codes.
- */
-
-/* This stuff should be in cdrom.h, since it is now generic... */
-#if VERBOSE_IDE_CD_ERRORS
-/* The generic packet command opcodes for CD/DVD Logical Units,
- * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
-static const struct {
-	unsigned short packet_command;
-	const char * const text;
-} packet_command_texts[] = {
-	{ GPCMD_TEST_UNIT_READY, "Test Unit Ready" },
-	{ GPCMD_REQUEST_SENSE, "Request Sense" },
-	{ GPCMD_FORMAT_UNIT, "Format Unit" },
-	{ GPCMD_INQUIRY, "Inquiry" },
-	{ GPCMD_START_STOP_UNIT, "Start/Stop Unit" },
-	{ GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, "Prevent/Allow Medium Removal" },
-	{ GPCMD_READ_FORMAT_CAPACITIES, "Read Format Capacities" },
-	{ GPCMD_READ_CDVD_CAPACITY, "Read Cd/Dvd Capacity" },
-	{ GPCMD_READ_10, "Read 10" },
-	{ GPCMD_WRITE_10, "Write 10" },
-	{ GPCMD_SEEK, "Seek" },
-	{ GPCMD_WRITE_AND_VERIFY_10, "Write and Verify 10" },
-	{ GPCMD_VERIFY_10, "Verify 10" },
-	{ GPCMD_FLUSH_CACHE, "Flush Cache" },
-	{ GPCMD_READ_SUBCHANNEL, "Read Subchannel" },
-	{ GPCMD_READ_TOC_PMA_ATIP, "Read Table of Contents" },
-	{ GPCMD_READ_HEADER, "Read Header" },
-	{ GPCMD_PLAY_AUDIO_10, "Play Audio 10" },
-	{ GPCMD_GET_CONFIGURATION, "Get Configuration" },
-	{ GPCMD_PLAY_AUDIO_MSF, "Play Audio MSF" },
-	{ GPCMD_PLAYAUDIO_TI, "Play Audio TrackIndex" },
-	{ GPCMD_GET_EVENT_STATUS_NOTIFICATION,
-		"Get Event Status Notification" },
-	{ GPCMD_PAUSE_RESUME, "Pause/Resume" },
-	{ GPCMD_STOP_PLAY_SCAN, "Stop Play/Scan" },
-	{ GPCMD_READ_DISC_INFO, "Read Disc Info" },
-	{ GPCMD_READ_TRACK_RZONE_INFO, "Read Track Rzone Info" },
-	{ GPCMD_RESERVE_RZONE_TRACK, "Reserve Rzone Track" },
-	{ GPCMD_SEND_OPC, "Send OPC" },
-	{ GPCMD_MODE_SELECT_10, "Mode Select 10" },
-	{ GPCMD_REPAIR_RZONE_TRACK, "Repair Rzone Track" },
-	{ GPCMD_MODE_SENSE_10, "Mode Sense 10" },
-	{ GPCMD_CLOSE_TRACK, "Close Track" },
-	{ GPCMD_BLANK, "Blank" },
-	{ GPCMD_SEND_EVENT, "Send Event" },
-	{ GPCMD_SEND_KEY, "Send Key" },
-	{ GPCMD_REPORT_KEY, "Report Key" },
-	{ GPCMD_LOAD_UNLOAD, "Load/Unload" },
-	{ GPCMD_SET_READ_AHEAD, "Set Read-ahead" },
-	{ GPCMD_READ_12, "Read 12" },
-	{ GPCMD_GET_PERFORMANCE, "Get Performance" },
-	{ GPCMD_SEND_DVD_STRUCTURE, "Send DVD Structure" },
-	{ GPCMD_READ_DVD_STRUCTURE, "Read DVD Structure" },
-	{ GPCMD_SET_STREAMING, "Set Streaming" },
-	{ GPCMD_READ_CD_MSF, "Read CD MSF" },
-	{ GPCMD_SCAN, "Scan" },
-	{ GPCMD_SET_SPEED, "Set Speed" },
-	{ GPCMD_PLAY_CD, "Play CD" },
-	{ GPCMD_MECHANISM_STATUS, "Mechanism Status" },
-	{ GPCMD_READ_CD, "Read CD" },
-};
-
-/* From Table 303 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
-static const char * const sense_key_texts[16] = {
-	"No sense data",
-	"Recovered error",
-	"Not ready",
-	"Medium error",
-	"Hardware error",
-	"Illegal request",
-	"Unit attention",
-	"Data protect",
-	"Blank check",
-	"(reserved)",
-	"(reserved)",
-	"Aborted command",
-	"(reserved)",
-	"(reserved)",
-	"Miscompare",
-	"(reserved)",
-};
-
-/* From Table 304 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
-static const struct {
-	unsigned long asc_ascq;
-	const char * const text;
-} sense_data_texts[] = {
-	{ 0x000000, "No additional sense information" },
-	{ 0x000011, "Play operation in progress" },
-	{ 0x000012, "Play operation paused" },
-	{ 0x000013, "Play operation successfully completed" },
-	{ 0x000014, "Play operation stopped due to error" },
-	{ 0x000015, "No current audio status to return" },
-	{ 0x010c0a, "Write error - padding blocks added" },
-	{ 0x011700, "Recovered data with no error correction applied" },
-	{ 0x011701, "Recovered data with retries" },
-	{ 0x011702, "Recovered data with positive head offset" },
-	{ 0x011703, "Recovered data with negative head offset" },
-	{ 0x011704, "Recovered data with retries and/or CIRC applied" },
-	{ 0x011705, "Recovered data using previous sector ID" },
-	{ 0x011800, "Recovered data with error correction applied" },
-	{ 0x011801, "Recovered data with error correction and retries applied"},
-	{ 0x011802, "Recovered data - the data was auto-reallocated" },
-	{ 0x011803, "Recovered data with CIRC" },
-	{ 0x011804, "Recovered data with L-EC" },
-	{ 0x015d00, "Failure prediction threshold exceeded"
-		    " - Predicted logical unit failure" },
-	{ 0x015d01, "Failure prediction threshold exceeded"
-		    " - Predicted media failure" },
-	{ 0x015dff, "Failure prediction threshold exceeded - False" },
-	{ 0x017301, "Power calibration area almost full" },
-	{ 0x020400, "Logical unit not ready - cause not reportable" },
-	/* Following is misspelled in ATAPI 2.6, _and_ in Mt. Fuji */
-	{ 0x020401, "Logical unit not ready"
-		    " - in progress [sic] of becoming ready" },
-	{ 0x020402, "Logical unit not ready - initializing command required" },
-	{ 0x020403, "Logical unit not ready - manual intervention required" },
-	{ 0x020404, "Logical unit not ready - format in progress" },
-	{ 0x020407, "Logical unit not ready - operation in progress" },
-	{ 0x020408, "Logical unit not ready - long write in progress" },
-	{ 0x020600, "No reference position found (media may be upside down)" },
-	{ 0x023000, "Incompatible medium installed" },
-	{ 0x023a00, "Medium not present" },
-	{ 0x025300, "Media load or eject failed" },
-	{ 0x025700, "Unable to recover table of contents" },
-	{ 0x030300, "Peripheral device write fault" },
-	{ 0x030301, "No write current" },
-	{ 0x030302, "Excessive write errors" },
-	{ 0x030c00, "Write error" },
-	{ 0x030c01, "Write error - Recovered with auto reallocation" },
-	{ 0x030c02, "Write error - auto reallocation failed" },
-	{ 0x030c03, "Write error - recommend reassignment" },
-	{ 0x030c04, "Compression check miscompare error" },
-	{ 0x030c05, "Data expansion occurred during compress" },
-	{ 0x030c06, "Block not compressible" },
-	{ 0x030c07, "Write error - recovery needed" },
-	{ 0x030c08, "Write error - recovery failed" },
-	{ 0x030c09, "Write error - loss of streaming" },
-	{ 0x031100, "Unrecovered read error" },
-	{ 0x031106, "CIRC unrecovered error" },
-	{ 0x033101, "Format command failed" },
-	{ 0x033200, "No defect spare location available" },
-	{ 0x033201, "Defect list update failure" },
-	{ 0x035100, "Erase failure" },
-	{ 0x037200, "Session fixation error" },
-	{ 0x037201, "Session fixation error writin lead-in" },
-	{ 0x037202, "Session fixation error writin lead-out" },
-	{ 0x037300, "CD control error" },
-	{ 0x037302, "Power calibration area is full" },
-	{ 0x037303, "Power calibration area error" },
-	{ 0x037304, "Program memory area / RMA update failure" },
-	{ 0x037305, "Program memory area / RMA is full" },
-	{ 0x037306, "Program memory area / RMA is (almost) full" },
-	{ 0x040200, "No seek complete" },
-	{ 0x040300, "Write fault" },
-	{ 0x040900, "Track following error" },
-	{ 0x040901, "Tracking servo failure" },
-	{ 0x040902, "Focus servo failure" },
-	{ 0x040903, "Spindle servo failure" },
-	{ 0x041500, "Random positioning error" },
-	{ 0x041501, "Mechanical positioning or changer error" },
-	{ 0x041502, "Positioning error detected by read of medium" },
-	{ 0x043c00, "Mechanical positioning or changer error" },
-	{ 0x044000, "Diagnostic failure on component (ASCQ)" },
-	{ 0x044400, "Internal CD/DVD logical unit failure" },
-	{ 0x04b600, "Media load mechanism failed" },
-	{ 0x051a00, "Parameter list length error" },
-	{ 0x052000, "Invalid command operation code" },
-	{ 0x052100, "Logical block address out of range" },
-	{ 0x052102, "Invalid address for write" },
-	{ 0x052400, "Invalid field in command packet" },
-	{ 0x052600, "Invalid field in parameter list" },
-	{ 0x052601, "Parameter not supported" },
-	{ 0x052602, "Parameter value invalid" },
-	{ 0x052700, "Write protected media" },
-	{ 0x052c00, "Command sequence error" },
-	{ 0x052c03, "Current program area is not empty" },
-	{ 0x052c04, "Current program area is empty" },
-	{ 0x053001, "Cannot read medium - unknown format" },
-	{ 0x053002, "Cannot read medium - incompatible format" },
-	{ 0x053900, "Saving parameters not supported" },
-	{ 0x054e00, "Overlapped commands attempted" },
-	{ 0x055302, "Medium removal prevented" },
-	{ 0x055500, "System resource failure" },
-	{ 0x056300, "End of user area encountered on this track" },
-	{ 0x056400, "Illegal mode for this track or incompatible medium" },
-	{ 0x056f00, "Copy protection key exchange failure"
-		    " - Authentication failure" },
-	{ 0x056f01, "Copy protection key exchange failure - Key not present" },
-	{ 0x056f02, "Copy protection key exchange failure"
-		     " - Key not established" },
-	{ 0x056f03, "Read of scrambled sector without authentication" },
-	{ 0x056f04, "Media region code is mismatched to logical unit" },
-	{ 0x056f05, "Drive region must be permanent"
-		    " / region reset count error" },
-	{ 0x057203, "Session fixation error - incomplete track in session" },
-	{ 0x057204, "Empty or partially written reserved track" },
-	{ 0x057205, "No more RZONE reservations are allowed" },
-	{ 0x05bf00, "Loss of streaming" },
-	{ 0x062800, "Not ready to ready transition, medium may have changed" },
-	{ 0x062900, "Power on, reset or hardware reset occurred" },
-	{ 0x062a00, "Parameters changed" },
-	{ 0x062a01, "Mode parameters changed" },
-	{ 0x062e00, "Insufficient time for operation" },
-	{ 0x063f00, "Logical unit operating conditions have changed" },
-	{ 0x063f01, "Microcode has been changed" },
-	{ 0x065a00, "Operator request or state change input (unspecified)" },
-	{ 0x065a01, "Operator medium removal request" },
-	{ 0x0bb900, "Play operation aborted" },
-	/* Here we use 0xff for the key (not a valid key) to signify
-	 * that these can have _any_ key value associated with them... */
-	{ 0xff0401, "Logical unit is in process of becoming ready" },
-	{ 0xff0400, "Logical unit not ready, cause not reportable" },
-	{ 0xff0402, "Logical unit not ready, initializing command required" },
-	{ 0xff0403, "Logical unit not ready, manual intervention required" },
-	{ 0xff0500, "Logical unit does not respond to selection" },
-	{ 0xff0800, "Logical unit communication failure" },
-	{ 0xff0802, "Logical unit communication parity error" },
-	{ 0xff0801, "Logical unit communication time-out" },
-	{ 0xff2500, "Logical unit not supported" },
-	{ 0xff4c00, "Logical unit failed self-configuration" },
-	{ 0xff3e00, "Logical unit has not self-configured yet" },
-};
-#endif
-
+/* ide-cd_verbose.c */
+void ide_cd_log_error(const char *, struct request *, struct request_sense *);
 
 #endif /* _IDE_CD_H */
Index: b/drivers/ide/ide-cd_verbose.c
===================================================================
--- /dev/null
+++ b/drivers/ide/ide-cd_verbose.c
@@ -0,0 +1,359 @@
+/*
+ * Verbose error logging for ATAPI CD/DVD devices.
+ *
+ * Copyright (C) 1994-1996  Scott Snyder <snyder@...ld0.fnal.gov>
+ * Copyright (C) 1996-1998  Erik Andersen <andersee@...ian.org>
+ * Copyright (C) 1998-2000  Jens Axboe <axboe@...e.de>
+ */
+
+#include <linux/kernel.h>
+#include <linux/blkdev.h>
+#include <linux/cdrom.h>
+#include <scsi/scsi.h>
+
+#ifndef CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS
+void ide_cd_log_error(const char *name, struct request *failed_command,
+		      struct request_sense *sense)
+{
+	/* Suppress printing unit attention and `in progress of becoming ready'
+	   errors when we're not being verbose. */
+	if (sense->sense_key == UNIT_ATTENTION ||
+	    (sense->sense_key == NOT_READY && (sense->asc == 4 ||
+						sense->asc == 0x3a)))
+		return;
+
+	printk(KERN_ERR "%s: error code: 0x%02x  sense_key: 0x%02x  "
+			"asc: 0x%02x  ascq: 0x%02x\n",
+			name, sense->error_code, sense->sense_key,
+			sense->asc, sense->ascq);
+}
+#else
+/* The generic packet command opcodes for CD/DVD Logical Units,
+ * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
+static const struct {
+	unsigned short packet_command;
+	const char * const text;
+} packet_command_texts[] = {
+	{ GPCMD_TEST_UNIT_READY, "Test Unit Ready" },
+	{ GPCMD_REQUEST_SENSE, "Request Sense" },
+	{ GPCMD_FORMAT_UNIT, "Format Unit" },
+	{ GPCMD_INQUIRY, "Inquiry" },
+	{ GPCMD_START_STOP_UNIT, "Start/Stop Unit" },
+	{ GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, "Prevent/Allow Medium Removal" },
+	{ GPCMD_READ_FORMAT_CAPACITIES, "Read Format Capacities" },
+	{ GPCMD_READ_CDVD_CAPACITY, "Read Cd/Dvd Capacity" },
+	{ GPCMD_READ_10, "Read 10" },
+	{ GPCMD_WRITE_10, "Write 10" },
+	{ GPCMD_SEEK, "Seek" },
+	{ GPCMD_WRITE_AND_VERIFY_10, "Write and Verify 10" },
+	{ GPCMD_VERIFY_10, "Verify 10" },
+	{ GPCMD_FLUSH_CACHE, "Flush Cache" },
+	{ GPCMD_READ_SUBCHANNEL, "Read Subchannel" },
+	{ GPCMD_READ_TOC_PMA_ATIP, "Read Table of Contents" },
+	{ GPCMD_READ_HEADER, "Read Header" },
+	{ GPCMD_PLAY_AUDIO_10, "Play Audio 10" },
+	{ GPCMD_GET_CONFIGURATION, "Get Configuration" },
+	{ GPCMD_PLAY_AUDIO_MSF, "Play Audio MSF" },
+	{ GPCMD_PLAYAUDIO_TI, "Play Audio TrackIndex" },
+	{ GPCMD_GET_EVENT_STATUS_NOTIFICATION,
+		"Get Event Status Notification" },
+	{ GPCMD_PAUSE_RESUME, "Pause/Resume" },
+	{ GPCMD_STOP_PLAY_SCAN, "Stop Play/Scan" },
+	{ GPCMD_READ_DISC_INFO, "Read Disc Info" },
+	{ GPCMD_READ_TRACK_RZONE_INFO, "Read Track Rzone Info" },
+	{ GPCMD_RESERVE_RZONE_TRACK, "Reserve Rzone Track" },
+	{ GPCMD_SEND_OPC, "Send OPC" },
+	{ GPCMD_MODE_SELECT_10, "Mode Select 10" },
+	{ GPCMD_REPAIR_RZONE_TRACK, "Repair Rzone Track" },
+	{ GPCMD_MODE_SENSE_10, "Mode Sense 10" },
+	{ GPCMD_CLOSE_TRACK, "Close Track" },
+	{ GPCMD_BLANK, "Blank" },
+	{ GPCMD_SEND_EVENT, "Send Event" },
+	{ GPCMD_SEND_KEY, "Send Key" },
+	{ GPCMD_REPORT_KEY, "Report Key" },
+	{ GPCMD_LOAD_UNLOAD, "Load/Unload" },
+	{ GPCMD_SET_READ_AHEAD, "Set Read-ahead" },
+	{ GPCMD_READ_12, "Read 12" },
+	{ GPCMD_GET_PERFORMANCE, "Get Performance" },
+	{ GPCMD_SEND_DVD_STRUCTURE, "Send DVD Structure" },
+	{ GPCMD_READ_DVD_STRUCTURE, "Read DVD Structure" },
+	{ GPCMD_SET_STREAMING, "Set Streaming" },
+	{ GPCMD_READ_CD_MSF, "Read CD MSF" },
+	{ GPCMD_SCAN, "Scan" },
+	{ GPCMD_SET_SPEED, "Set Speed" },
+	{ GPCMD_PLAY_CD, "Play CD" },
+	{ GPCMD_MECHANISM_STATUS, "Mechanism Status" },
+	{ GPCMD_READ_CD, "Read CD" },
+};
+
+/* From Table 303 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
+static const char * const sense_key_texts[16] = {
+	"No sense data",
+	"Recovered error",
+	"Not ready",
+	"Medium error",
+	"Hardware error",
+	"Illegal request",
+	"Unit attention",
+	"Data protect",
+	"Blank check",
+	"(reserved)",
+	"(reserved)",
+	"Aborted command",
+	"(reserved)",
+	"(reserved)",
+	"Miscompare",
+	"(reserved)",
+};
+
+/* From Table 304 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
+static const struct {
+	unsigned long asc_ascq;
+	const char * const text;
+} sense_data_texts[] = {
+	{ 0x000000, "No additional sense information" },
+	{ 0x000011, "Play operation in progress" },
+	{ 0x000012, "Play operation paused" },
+	{ 0x000013, "Play operation successfully completed" },
+	{ 0x000014, "Play operation stopped due to error" },
+	{ 0x000015, "No current audio status to return" },
+	{ 0x010c0a, "Write error - padding blocks added" },
+	{ 0x011700, "Recovered data with no error correction applied" },
+	{ 0x011701, "Recovered data with retries" },
+	{ 0x011702, "Recovered data with positive head offset" },
+	{ 0x011703, "Recovered data with negative head offset" },
+	{ 0x011704, "Recovered data with retries and/or CIRC applied" },
+	{ 0x011705, "Recovered data using previous sector ID" },
+	{ 0x011800, "Recovered data with error correction applied" },
+	{ 0x011801, "Recovered data with error correction and retries applied"},
+	{ 0x011802, "Recovered data - the data was auto-reallocated" },
+	{ 0x011803, "Recovered data with CIRC" },
+	{ 0x011804, "Recovered data with L-EC" },
+	{ 0x015d00, "Failure prediction threshold exceeded"
+		    " - Predicted logical unit failure" },
+	{ 0x015d01, "Failure prediction threshold exceeded"
+		    " - Predicted media failure" },
+	{ 0x015dff, "Failure prediction threshold exceeded - False" },
+	{ 0x017301, "Power calibration area almost full" },
+	{ 0x020400, "Logical unit not ready - cause not reportable" },
+	/* Following is misspelled in ATAPI 2.6, _and_ in Mt. Fuji */
+	{ 0x020401, "Logical unit not ready"
+		    " - in progress [sic] of becoming ready" },
+	{ 0x020402, "Logical unit not ready - initializing command required" },
+	{ 0x020403, "Logical unit not ready - manual intervention required" },
+	{ 0x020404, "Logical unit not ready - format in progress" },
+	{ 0x020407, "Logical unit not ready - operation in progress" },
+	{ 0x020408, "Logical unit not ready - long write in progress" },
+	{ 0x020600, "No reference position found (media may be upside down)" },
+	{ 0x023000, "Incompatible medium installed" },
+	{ 0x023a00, "Medium not present" },
+	{ 0x025300, "Media load or eject failed" },
+	{ 0x025700, "Unable to recover table of contents" },
+	{ 0x030300, "Peripheral device write fault" },
+	{ 0x030301, "No write current" },
+	{ 0x030302, "Excessive write errors" },
+	{ 0x030c00, "Write error" },
+	{ 0x030c01, "Write error - Recovered with auto reallocation" },
+	{ 0x030c02, "Write error - auto reallocation failed" },
+	{ 0x030c03, "Write error - recommend reassignment" },
+	{ 0x030c04, "Compression check miscompare error" },
+	{ 0x030c05, "Data expansion occurred during compress" },
+	{ 0x030c06, "Block not compressible" },
+	{ 0x030c07, "Write error - recovery needed" },
+	{ 0x030c08, "Write error - recovery failed" },
+	{ 0x030c09, "Write error - loss of streaming" },
+	{ 0x031100, "Unrecovered read error" },
+	{ 0x031106, "CIRC unrecovered error" },
+	{ 0x033101, "Format command failed" },
+	{ 0x033200, "No defect spare location available" },
+	{ 0x033201, "Defect list update failure" },
+	{ 0x035100, "Erase failure" },
+	{ 0x037200, "Session fixation error" },
+	{ 0x037201, "Session fixation error writin lead-in" },
+	{ 0x037202, "Session fixation error writin lead-out" },
+	{ 0x037300, "CD control error" },
+	{ 0x037302, "Power calibration area is full" },
+	{ 0x037303, "Power calibration area error" },
+	{ 0x037304, "Program memory area / RMA update failure" },
+	{ 0x037305, "Program memory area / RMA is full" },
+	{ 0x037306, "Program memory area / RMA is (almost) full" },
+	{ 0x040200, "No seek complete" },
+	{ 0x040300, "Write fault" },
+	{ 0x040900, "Track following error" },
+	{ 0x040901, "Tracking servo failure" },
+	{ 0x040902, "Focus servo failure" },
+	{ 0x040903, "Spindle servo failure" },
+	{ 0x041500, "Random positioning error" },
+	{ 0x041501, "Mechanical positioning or changer error" },
+	{ 0x041502, "Positioning error detected by read of medium" },
+	{ 0x043c00, "Mechanical positioning or changer error" },
+	{ 0x044000, "Diagnostic failure on component (ASCQ)" },
+	{ 0x044400, "Internal CD/DVD logical unit failure" },
+	{ 0x04b600, "Media load mechanism failed" },
+	{ 0x051a00, "Parameter list length error" },
+	{ 0x052000, "Invalid command operation code" },
+	{ 0x052100, "Logical block address out of range" },
+	{ 0x052102, "Invalid address for write" },
+	{ 0x052400, "Invalid field in command packet" },
+	{ 0x052600, "Invalid field in parameter list" },
+	{ 0x052601, "Parameter not supported" },
+	{ 0x052602, "Parameter value invalid" },
+	{ 0x052700, "Write protected media" },
+	{ 0x052c00, "Command sequence error" },
+	{ 0x052c03, "Current program area is not empty" },
+	{ 0x052c04, "Current program area is empty" },
+	{ 0x053001, "Cannot read medium - unknown format" },
+	{ 0x053002, "Cannot read medium - incompatible format" },
+	{ 0x053900, "Saving parameters not supported" },
+	{ 0x054e00, "Overlapped commands attempted" },
+	{ 0x055302, "Medium removal prevented" },
+	{ 0x055500, "System resource failure" },
+	{ 0x056300, "End of user area encountered on this track" },
+	{ 0x056400, "Illegal mode for this track or incompatible medium" },
+	{ 0x056f00, "Copy protection key exchange failure"
+		    " - Authentication failure" },
+	{ 0x056f01, "Copy protection key exchange failure - Key not present" },
+	{ 0x056f02, "Copy protection key exchange failure"
+		     " - Key not established" },
+	{ 0x056f03, "Read of scrambled sector without authentication" },
+	{ 0x056f04, "Media region code is mismatched to logical unit" },
+	{ 0x056f05, "Drive region must be permanent"
+		    " / region reset count error" },
+	{ 0x057203, "Session fixation error - incomplete track in session" },
+	{ 0x057204, "Empty or partially written reserved track" },
+	{ 0x057205, "No more RZONE reservations are allowed" },
+	{ 0x05bf00, "Loss of streaming" },
+	{ 0x062800, "Not ready to ready transition, medium may have changed" },
+	{ 0x062900, "Power on, reset or hardware reset occurred" },
+	{ 0x062a00, "Parameters changed" },
+	{ 0x062a01, "Mode parameters changed" },
+	{ 0x062e00, "Insufficient time for operation" },
+	{ 0x063f00, "Logical unit operating conditions have changed" },
+	{ 0x063f01, "Microcode has been changed" },
+	{ 0x065a00, "Operator request or state change input (unspecified)" },
+	{ 0x065a01, "Operator medium removal request" },
+	{ 0x0bb900, "Play operation aborted" },
+	/* Here we use 0xff for the key (not a valid key) to signify
+	 * that these can have _any_ key value associated with them... */
+	{ 0xff0401, "Logical unit is in process of becoming ready" },
+	{ 0xff0400, "Logical unit not ready, cause not reportable" },
+	{ 0xff0402, "Logical unit not ready, initializing command required" },
+	{ 0xff0403, "Logical unit not ready, manual intervention required" },
+	{ 0xff0500, "Logical unit does not respond to selection" },
+	{ 0xff0800, "Logical unit communication failure" },
+	{ 0xff0802, "Logical unit communication parity error" },
+	{ 0xff0801, "Logical unit communication time-out" },
+	{ 0xff2500, "Logical unit not supported" },
+	{ 0xff4c00, "Logical unit failed self-configuration" },
+	{ 0xff3e00, "Logical unit has not self-configured yet" },
+};
+
+void ide_cd_log_error(const char *name, struct request *failed_command,
+		      struct request_sense *sense)
+{
+	int i;
+	const char *s = "bad sense key!";
+	char buf[80];
+
+	printk(KERN_ERR "ATAPI device %s:\n", name);
+	if (sense->error_code == 0x70)
+		printk(KERN_CONT "  Error: ");
+	else if (sense->error_code == 0x71)
+		printk("  Deferred Error: ");
+	else if (sense->error_code == 0x7f)
+		printk(KERN_CONT "  Vendor-specific Error: ");
+	else
+		printk(KERN_CONT "  Unknown Error Type: ");
+
+	if (sense->sense_key < ARRAY_SIZE(sense_key_texts))
+		s = sense_key_texts[sense->sense_key];
+
+	printk(KERN_CONT "%s -- (Sense key=0x%02x)\n", s, sense->sense_key);
+
+	if (sense->asc == 0x40) {
+		sprintf(buf, "Diagnostic failure on component 0x%02x",
+			sense->ascq);
+		s = buf;
+	} else {
+		int lo = 0, mid, hi = ARRAY_SIZE(sense_data_texts);
+		unsigned long key = (sense->sense_key << 16);
+
+		key |= (sense->asc << 8);
+		if (!(sense->ascq >= 0x80 && sense->ascq <= 0xdd))
+			key |= sense->ascq;
+		s = NULL;
+
+		while (hi > lo) {
+			mid = (lo + hi) / 2;
+			if (sense_data_texts[mid].asc_ascq == key ||
+			    sense_data_texts[mid].asc_ascq == (0xff0000|key)) {
+				s = sense_data_texts[mid].text;
+				break;
+			} else if (sense_data_texts[mid].asc_ascq > key)
+				hi = mid;
+			else
+				lo = mid + 1;
+		}
+	}
+
+	if (s == NULL) {
+		if (sense->asc > 0x80)
+			s = "(vendor-specific error)";
+		else
+			s = "(reserved error code)";
+	}
+
+	printk(KERN_ERR "  %s -- (asc=0x%02x, ascq=0x%02x)\n",
+			s, sense->asc, sense->ascq);
+
+	if (failed_command != NULL) {
+		int lo = 0, mid, hi = ARRAY_SIZE(packet_command_texts);
+		s = NULL;
+
+		while (hi > lo) {
+			mid = (lo + hi) / 2;
+			if (packet_command_texts[mid].packet_command ==
+			    failed_command->cmd[0]) {
+				s = packet_command_texts[mid].text;
+				break;
+			}
+			if (packet_command_texts[mid].packet_command >
+			    failed_command->cmd[0])
+				hi = mid;
+			else
+				lo = mid + 1;
+		}
+
+		printk(KERN_ERR "  The failed \"%s\" packet command "
+				"was: \n  \"", s);
+		for (i = 0; i < sizeof(failed_command->cmd); i++)
+			printk(KERN_CONT "%02x ", failed_command->cmd[i]);
+		printk(KERN_CONT "\"\n");
+	}
+
+	/* The SKSV bit specifies validity of the sense_key_specific
+	 * in the next two commands. It is bit 7 of the first byte.
+	 * In the case of NOT_READY, if SKSV is set the drive can
+	 * give us nice ETA readings.
+	 */
+	if (sense->sense_key == NOT_READY && (sense->sks[0] & 0x80)) {
+		int progress = (sense->sks[1] << 8 | sense->sks[2]) * 100;
+
+		printk(KERN_ERR "  Command is %02d%% complete\n",
+				progress / 0xffff);
+	}
+
+	if (sense->sense_key == ILLEGAL_REQUEST &&
+	    (sense->sks[0] & 0x80) != 0) {
+		printk(KERN_ERR "  Error in %s byte %d",
+				(sense->sks[0] & 0x40) != 0 ?
+				"command packet" : "command data",
+				(sense->sks[1] << 8) + sense->sks[2]);
+
+		if ((sense->sks[0] & 0x40) != 0)
+			printk(KERN_CONT " bit %d", sense->sks[0] & 0x07);
+
+		printk(KERN_CONT "\n");
+	}
+}
+#endif
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists