| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 1 Jan 2008 01:17:54 +0100
From: Miguel Botón <mboton.lkml@...il.com>
To: linux-kernel@...r.kernel.org
Cc: linux-wireless@...r.kernel.org, linville@...driver.com,
mb@...sch.de
Subject: [PATCH 2/2] b44: power down PHY when interface down
This is just this patch (http://lkml.org/lkml/2007/7/1/51) but adapted
to the 'b44' ssb driver.
Signed-off-by: Miguel Botón <mboton@...il.com>
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 49e9172..ea2a2b5 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -128,6 +128,8 @@ static void b44_init_rings(struct b44 *);
#define B44_FULL_RESET 1
#define B44_FULL_RESET_SKIP_PHY 2
#define B44_PARTIAL_RESET 3
+#define B44_CHIP_RESET_FULL 4
+#define B44_CHIP_RESET_PARTIAL 5
static void b44_init_hw(struct b44 *, int);
@@ -1259,7 +1261,7 @@ static void b44_clear_stats(struct b44 *bp)
}
/* bp->lock is held. */
-static void b44_chip_reset(struct b44 *bp)
+static void b44_chip_reset(struct b44 *bp, int reset_kind)
{
struct ssb_device *sdev = bp->sdev;
@@ -1281,6 +1283,13 @@ static void b44_chip_reset(struct b44 *bp)
ssb_device_enable(bp->sdev, 0);
b44_clear_stats(bp);
+ /*
+ * Don't enable PHY if we are doing a partial reset
+ * we are probably going to power down
+ */
+ if (reset_kind == B44_CHIP_RESET_PARTIAL)
+ return;
+
switch (sdev->bus->bustype) {
case SSB_BUSTYPE_SSB:
bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
@@ -1316,7 +1325,14 @@ static void b44_chip_reset(struct b44 *bp)
static void b44_halt(struct b44 *bp)
{
b44_disable_ints(bp);
- b44_chip_reset(bp);
+ /* reset PHY */
+ b44_phy_reset(bp);
+ /* power down PHY */
+ printk(KERN_INFO PFX "%s: powering down PHY\n", bp->dev->name);
+ bw32(bp, B44_MAC_CTRL, MAC_CTRL_PHY_PDOWN);
+ /* now reset the chip, but without enabling the MAC&PHY
+ * part of it. This has to be done _after_ we shut down the PHY */
+ b44_chip_reset(bp, B44_CHIP_RESET_PARTIAL);
}
/* bp->lock is held. */
@@ -1365,7 +1381,7 @@ static void b44_init_hw(struct b44 *bp, int reset_kind)
{
u32 val;
- b44_chip_reset(bp);
+ b44_chip_reset(bp, B44_CHIP_RESET_FULL);
if (reset_kind == B44_FULL_RESET) {
b44_phy_reset(bp);
b44_setup_phy(bp);
@@ -1422,7 +1438,7 @@ static int b44_open(struct net_device *dev)
err = request_irq(dev->irq, b44_interrupt, IRQF_SHARED, dev->name, dev);
if (unlikely(err < 0)) {
napi_disable(&bp->napi);
- b44_chip_reset(bp);
+ b44_chip_reset(bp, B44_CHIP_RESET_PARTIAL);
b44_free_rings(bp);
b44_free_consistent(bp);
goto out;
@@ -2188,7 +2204,7 @@ static int __devinit b44_init_one(struct ssb_device *sdev,
/* Chip reset provides power to the b44 MAC & PCI cores, which
* is necessary for MAC register access.
*/
- b44_chip_reset(bp);
+ b44_chip_reset(bp, B44_CHIP_RESET_FULL);
printk(KERN_INFO "%s: Broadcom 44xx/47xx 10/100BaseT Ethernet %s\n",
dev->name, print_mac(mac, dev->dev_addr));
@@ -2212,6 +2228,7 @@ static void __devexit b44_remove_one(struct ssb_device *sdev)
unregister_netdev(dev);
ssb_bus_may_powerdown(sdev->bus);
free_netdev(dev);
+ ssb_pcihost_set_power_state(sdev, PCI_D3hot);
ssb_set_drvdata(sdev, NULL);
}
@@ -2240,6 +2257,7 @@ static int b44_suspend(struct ssb_device *sdev, pm_message_t state)
b44_setup_wol(bp);
}
+ ssb_pcihost_set_power_state(sdev, PCI_D3hot);
return 0;
}
--
Miguel Botón
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists