| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 3 Jan 2008 14:20:01 +0100
From: Borislav Petkov <bbpetkov@...oo.de>
To: linux-ide@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: bzolnier@...il.com, Borislav Petkov <bbpetkov@...oo.de>
Subject: [RESEND PATCH 02/10] ide-floppy: move ide-floppy struct and macro defs into its own header. While at it
- do a white-space cleanup
- remove old crufty code untouched since at least 2005
- shorten lines longer than 80ish columns
- shorten some LAAARGE typenames.
There should be no functional changes resulting from this patch.
Signed-off-by: Borislav Petkov <bbpetkov@...oo.de>
---
drivers/ide/ide-floppy.c | 763 ++++++++++++----------------------------------
drivers/ide/ide-floppy.h | 382 +++++++++++++++++++++++
2 files changed, 581 insertions(+), 564 deletions(-)
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 785fbde..52d09c1 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -44,418 +44,7 @@
#include <asm/io.h>
#include <asm/unaligned.h>
-/*
- * The following are used to debug the driver.
- */
-#define IDEFLOPPY_DEBUG_LOG 0
-#define IDEFLOPPY_DEBUG_INFO 0
-#define IDEFLOPPY_DEBUG_BUGS 1
-
-/* #define IDEFLOPPY_DEBUG(fmt, args...) printk(KERN_INFO fmt, ## args) */
-#define IDEFLOPPY_DEBUG( fmt, args... )
-
-#if IDEFLOPPY_DEBUG_LOG
-#define debug_log printk
-#else
-#define debug_log(fmt, args... ) do {} while(0)
-#endif
-
-
-/*
- * Some drives require a longer irq timeout.
- */
-#define IDEFLOPPY_WAIT_CMD (5 * WAIT_CMD)
-
-/*
- * After each failed packet command we issue a request sense command
- * and retry the packet command IDEFLOPPY_MAX_PC_RETRIES times.
- */
-#define IDEFLOPPY_MAX_PC_RETRIES 3
-
-/*
- * With each packet command, we allocate a buffer of
- * IDEFLOPPY_PC_BUFFER_SIZE bytes.
- */
-#define IDEFLOPPY_PC_BUFFER_SIZE 256
-
-/*
- * In various places in the driver, we need to allocate storage
- * for packet commands and requests, which will remain valid while
- * we leave the driver to wait for an interrupt or a timeout event.
- */
-#define IDEFLOPPY_PC_STACK (10 + IDEFLOPPY_MAX_PC_RETRIES)
-
-/*
- * Our view of a packet command.
- */
-typedef struct idefloppy_packet_command_s {
- u8 c[12]; /* Actual packet bytes */
- int retries; /* On each retry, we increment retries */
- int error; /* Error code */
- int request_transfer; /* Bytes to transfer */
- int actually_transferred; /* Bytes actually transferred */
- int buffer_size; /* Size of our data buffer */
- int b_count; /* Missing/Available data on the current buffer */
- struct request *rq; /* The corresponding request */
- u8 *buffer; /* Data buffer */
- u8 *current_position; /* Pointer into the above buffer */
- void (*callback) (ide_drive_t *); /* Called when this packet command is completed */
- u8 pc_buffer[IDEFLOPPY_PC_BUFFER_SIZE]; /* Temporary buffer */
- unsigned long flags; /* Status/Action bit flags: long for set_bit */
-} idefloppy_pc_t;
-
-/*
- * Packet command flag bits.
- */
-#define PC_ABORT 0 /* Set when an error is considered normal - We won't retry */
-#define PC_DMA_RECOMMENDED 2 /* 1 when we prefer to use DMA if possible */
-#define PC_DMA_IN_PROGRESS 3 /* 1 while DMA in progress */
-#define PC_DMA_ERROR 4 /* 1 when encountered problem during DMA */
-#define PC_WRITING 5 /* Data direction */
-
-#define PC_SUPPRESS_ERROR 6 /* Suppress error reporting */
-
-/*
- * Removable Block Access Capabilities Page
- */
-typedef struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned page_code :6; /* Page code - Should be 0x1b */
- unsigned reserved1_6 :1; /* Reserved */
- unsigned ps :1; /* Should be 0 */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned ps :1; /* Should be 0 */
- unsigned reserved1_6 :1; /* Reserved */
- unsigned page_code :6; /* Page code - Should be 0x1b */
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
- u8 page_length; /* Page Length - Should be 0xa */
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned reserved2 :6;
- unsigned srfp :1; /* Supports reporting progress of format */
- unsigned sflp :1; /* System floppy type device */
- unsigned tlun :3; /* Total logical units supported by the device */
- unsigned reserved3 :3;
- unsigned sml :1; /* Single / Multiple lun supported */
- unsigned ncd :1; /* Non cd optical device */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned sflp :1; /* System floppy type device */
- unsigned srfp :1; /* Supports reporting progress of format */
- unsigned reserved2 :6;
- unsigned ncd :1; /* Non cd optical device */
- unsigned sml :1; /* Single / Multiple lun supported */
- unsigned reserved3 :3;
- unsigned tlun :3; /* Total logical units supported by the device */
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
- u8 reserved[8];
-} idefloppy_capabilities_page_t;
-
-/*
- * Flexible disk page.
- */
-typedef struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned page_code :6; /* Page code - Should be 0x5 */
- unsigned reserved1_6 :1; /* Reserved */
- unsigned ps :1; /* The device is capable of saving the page */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned ps :1; /* The device is capable of saving the page */
- unsigned reserved1_6 :1; /* Reserved */
- unsigned page_code :6; /* Page code - Should be 0x5 */
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
- u8 page_length; /* Page Length - Should be 0x1e */
- u16 transfer_rate; /* In kilobits per second */
- u8 heads, sectors; /* Number of heads, Number of sectors per track */
- u16 sector_size; /* Byes per sector */
- u16 cyls; /* Number of cylinders */
- u8 reserved10[10];
- u8 motor_delay; /* Motor off delay */
- u8 reserved21[7];
- u16 rpm; /* Rotations per minute */
- u8 reserved30[2];
-} idefloppy_flexible_disk_page_t;
-
-/*
- * Format capacity
- */
-typedef struct {
- u8 reserved[3];
- u8 length; /* Length of the following descriptors in bytes */
-} idefloppy_capacity_header_t;
-
-typedef struct {
- u32 blocks; /* Number of blocks */
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned dc :2; /* Descriptor Code */
- unsigned reserved :6;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned reserved :6;
- unsigned dc :2; /* Descriptor Code */
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
- u8 length_msb; /* Block Length (MSB)*/
- u16 length; /* Block Length */
-} idefloppy_capacity_descriptor_t;
-
-#define CAPACITY_INVALID 0x00
-#define CAPACITY_UNFORMATTED 0x01
-#define CAPACITY_CURRENT 0x02
-#define CAPACITY_NO_CARTRIDGE 0x03
-
-/*
- * Most of our global data which we need to save even as we leave the
- * driver due to an interrupt or a timer event is stored in a variable
- * of type idefloppy_floppy_t, defined below.
- */
-typedef struct ide_floppy_obj {
- ide_drive_t *drive;
- ide_driver_t *driver;
- struct gendisk *disk;
- struct kref kref;
- unsigned int openers; /* protected by BKL for now */
-
- /* Current packet command */
- idefloppy_pc_t *pc;
- /* Last failed packet command */
- idefloppy_pc_t *failed_pc;
- /* Packet command stack */
- idefloppy_pc_t pc_stack[IDEFLOPPY_PC_STACK];
- /* Next free packet command storage space */
- int pc_stack_index;
- struct request rq_stack[IDEFLOPPY_PC_STACK];
- /* We implement a circular array */
- int rq_stack_index;
-
- /*
- * Last error information
- */
- u8 sense_key, asc, ascq;
- /* delay this long before sending packet command */
- u8 ticks;
- int progress_indication;
-
- /*
- * Device information
- */
- /* Current format */
- int blocks, block_size, bs_factor;
- /* Last format capacity */
- idefloppy_capacity_descriptor_t capacity;
- /* Copy of the flexible disk page */
- idefloppy_flexible_disk_page_t flexible_disk_page;
- /* Write protect */
- int wp;
- /* Supports format progress report */
- int srfp;
- /* Status/Action flags */
- unsigned long flags;
-} idefloppy_floppy_t;
-
-#define IDEFLOPPY_TICKS_DELAY HZ/20 /* default delay for ZIP 100 (50ms) */
-
-/*
- * Floppy flag bits values.
- */
-#define IDEFLOPPY_DRQ_INTERRUPT 0 /* DRQ interrupt device */
-#define IDEFLOPPY_MEDIA_CHANGED 1 /* Media may have changed */
-#define IDEFLOPPY_USE_READ12 2 /* Use READ12/WRITE12 or READ10/WRITE10 */
-#define IDEFLOPPY_FORMAT_IN_PROGRESS 3 /* Format in progress */
-#define IDEFLOPPY_CLIK_DRIVE 4 /* Avoid commands not supported in Clik drive */
-#define IDEFLOPPY_ZIP_DRIVE 5 /* Requires BH algorithm for packets */
-
-/*
- * ATAPI floppy drive packet commands
- */
-#define IDEFLOPPY_FORMAT_UNIT_CMD 0x04
-#define IDEFLOPPY_INQUIRY_CMD 0x12
-#define IDEFLOPPY_MODE_SELECT_CMD 0x55
-#define IDEFLOPPY_MODE_SENSE_CMD 0x5a
-#define IDEFLOPPY_READ10_CMD 0x28
-#define IDEFLOPPY_READ12_CMD 0xa8
-#define IDEFLOPPY_READ_CAPACITY_CMD 0x23
-#define IDEFLOPPY_REQUEST_SENSE_CMD 0x03
-#define IDEFLOPPY_PREVENT_REMOVAL_CMD 0x1e
-#define IDEFLOPPY_SEEK_CMD 0x2b
-#define IDEFLOPPY_START_STOP_CMD 0x1b
-#define IDEFLOPPY_TEST_UNIT_READY_CMD 0x00
-#define IDEFLOPPY_VERIFY_CMD 0x2f
-#define IDEFLOPPY_WRITE10_CMD 0x2a
-#define IDEFLOPPY_WRITE12_CMD 0xaa
-#define IDEFLOPPY_WRITE_VERIFY_CMD 0x2e
-
-/*
- * Defines for the mode sense command
- */
-#define MODE_SENSE_CURRENT 0x00
-#define MODE_SENSE_CHANGEABLE 0x01
-#define MODE_SENSE_DEFAULT 0x02
-#define MODE_SENSE_SAVED 0x03
-
-/*
- * IOCTLs used in low-level formatting.
- */
-
-#define IDEFLOPPY_IOCTL_FORMAT_SUPPORTED 0x4600
-#define IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY 0x4601
-#define IDEFLOPPY_IOCTL_FORMAT_START 0x4602
-#define IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS 0x4603
-
-#if 0
-/*
- * Special requests for our block device strategy routine.
- */
-#define IDEFLOPPY_FIRST_RQ 90
-
-/*
- * IDEFLOPPY_PC_RQ is used to queue a packet command in the request queue.
- */
-#define IDEFLOPPY_PC_RQ 90
-
-#define IDEFLOPPY_LAST_RQ 90
-
-/*
- * A macro which can be used to check if a given request command
- * originated in the driver or in the buffer cache layer.
- */
-#define IDEFLOPPY_RQ_CMD(cmd) ((cmd >= IDEFLOPPY_FIRST_RQ) && (cmd <= IDEFLOPPY_LAST_RQ))
-
-#endif
-
-/*
- * Error codes which are returned in rq->errors to the higher part
- * of the driver.
- */
-#define IDEFLOPPY_ERROR_GENERAL 101
-
-/*
- * The following is used to format the general configuration word of
- * the ATAPI IDENTIFY DEVICE command.
- */
-struct idefloppy_id_gcw {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned packet_size :2; /* Packet Size */
- unsigned reserved234 :3; /* Reserved */
- unsigned drq_type :2; /* Command packet DRQ type */
- unsigned removable :1; /* Removable media */
- unsigned device_type :5; /* Device type */
- unsigned reserved13 :1; /* Reserved */
- unsigned protocol :2; /* Protocol type */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned protocol :2; /* Protocol type */
- unsigned reserved13 :1; /* Reserved */
- unsigned device_type :5; /* Device type */
- unsigned removable :1; /* Removable media */
- unsigned drq_type :2; /* Command packet DRQ type */
- unsigned reserved234 :3; /* Reserved */
- unsigned packet_size :2; /* Packet Size */
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
-};
-
-/*
- * INQUIRY packet command - Data Format
- */
-typedef struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned device_type :5; /* Peripheral Device Type */
- unsigned reserved0_765 :3; /* Peripheral Qualifier - Reserved */
- unsigned reserved1_6t0 :7; /* Reserved */
- unsigned rmb :1; /* Removable Medium Bit */
- unsigned ansi_version :3; /* ANSI Version */
- unsigned ecma_version :3; /* ECMA Version */
- unsigned iso_version :2; /* ISO Version */
- unsigned response_format :4; /* Response Data Format */
- unsigned reserved3_45 :2; /* Reserved */
- unsigned reserved3_6 :1; /* TrmIOP - Reserved */
- unsigned reserved3_7 :1; /* AENC - Reserved */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned reserved0_765 :3; /* Peripheral Qualifier - Reserved */
- unsigned device_type :5; /* Peripheral Device Type */
- unsigned rmb :1; /* Removable Medium Bit */
- unsigned reserved1_6t0 :7; /* Reserved */
- unsigned iso_version :2; /* ISO Version */
- unsigned ecma_version :3; /* ECMA Version */
- unsigned ansi_version :3; /* ANSI Version */
- unsigned reserved3_7 :1; /* AENC - Reserved */
- unsigned reserved3_6 :1; /* TrmIOP - Reserved */
- unsigned reserved3_45 :2; /* Reserved */
- unsigned response_format :4; /* Response Data Format */
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
- u8 additional_length; /* Additional Length (total_length-4) */
- u8 rsv5, rsv6, rsv7; /* Reserved */
- u8 vendor_id[8]; /* Vendor Identification */
- u8 product_id[16]; /* Product Identification */
- u8 revision_level[4]; /* Revision Level */
- u8 vendor_specific[20]; /* Vendor Specific - Optional */
- u8 reserved56t95[40]; /* Reserved - Optional */
- /* Additional information may be returned */
-} idefloppy_inquiry_result_t;
-
-/*
- * REQUEST SENSE packet command result - Data Format.
- */
-typedef struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned error_code :7; /* Current error (0x70) */
- unsigned valid :1; /* The information field conforms to SFF-8070i */
- u8 reserved1 :8; /* Reserved */
- unsigned sense_key :4; /* Sense Key */
- unsigned reserved2_4 :1; /* Reserved */
- unsigned ili :1; /* Incorrect Length Indicator */
- unsigned reserved2_67 :2;
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned valid :1; /* The information field conforms to SFF-8070i */
- unsigned error_code :7; /* Current error (0x70) */
- u8 reserved1 :8; /* Reserved */
- unsigned reserved2_67 :2;
- unsigned ili :1; /* Incorrect Length Indicator */
- unsigned reserved2_4 :1; /* Reserved */
- unsigned sense_key :4; /* Sense Key */
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
- u32 information __attribute__ ((packed));
- u8 asl; /* Additional sense length (n-7) */
- u32 command_specific; /* Additional command specific information */
- u8 asc; /* Additional Sense Code */
- u8 ascq; /* Additional Sense Code Qualifier */
- u8 replaceable_unit_code; /* Field Replaceable Unit Code */
- u8 sksv[3];
- u8 pad[2]; /* Padding to 20 bytes */
-} idefloppy_request_sense_result_t;
-
-/*
- * Pages of the SELECT SENSE / MODE SENSE packet commands.
- */
-#define IDEFLOPPY_CAPABILITIES_PAGE 0x1b
-#define IDEFLOPPY_FLEXIBLE_DISK_PAGE 0x05
-
-/*
- * Mode Parameter Header for the MODE SENSE packet command
- */
-typedef struct {
- u16 mode_data_length; /* Length of the following data transfer */
- u8 medium_type; /* Medium Type */
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned reserved3 :7;
- unsigned wp :1; /* Write protect */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned wp :1; /* Write protect */
- unsigned reserved3 :7;
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
- u8 reserved[4];
-} idefloppy_mode_parameter_header_t;
+#include "ide-floppy.h"
static DEFINE_MUTEX(idefloppy_ref_mutex);
@@ -512,7 +101,7 @@ static void idefloppy_write_zeros (ide_drive_t *drive, unsigned int bcount)
*/
static int idefloppy_do_end_request(ide_drive_t *drive, int uptodate, int nsecs)
{
- idefloppy_floppy_t *floppy = drive->driver_data;
+ idefloppy_t *floppy = drive->driver_data;
struct request *rq = HWGROUP(drive)->rq;
int error;
@@ -539,7 +128,8 @@ static int idefloppy_do_end_request(ide_drive_t *drive, int uptodate, int nsecs)
return 0;
}
-static void idefloppy_input_buffers (ide_drive_t *drive, idefloppy_pc_t *pc, unsigned int bcount)
+static void idefloppy_input_buffers (ide_drive_t *drive, idefloppy_pc_t *pc,
+ unsigned int bcount)
{
struct request *rq = pc->rq;
struct bio_vec *bvec;
@@ -566,12 +156,14 @@ static void idefloppy_input_buffers (ide_drive_t *drive, idefloppy_pc_t *pc, uns
idefloppy_do_end_request(drive, 1, done >> 9);
if (bcount) {
- printk(KERN_ERR "%s: leftover data in idefloppy_input_buffers, bcount == %d\n", drive->name, bcount);
+ printk(KERN_ERR "%s: leftover data in idefloppy_input_buffers,"
+ " bcount == %d\n", drive->name, bcount);
idefloppy_discard_data(drive, bcount);
}
}
-static void idefloppy_output_buffers (ide_drive_t *drive, idefloppy_pc_t *pc, unsigned int bcount)
+static void idefloppy_output_buffers (ide_drive_t *drive, idefloppy_pc_t *pc,
+ unsigned int bcount)
{
struct request *rq = pc->rq;
struct req_iterator iter;
@@ -599,7 +191,8 @@ static void idefloppy_output_buffers (ide_drive_t *drive, idefloppy_pc_t *pc, un
#if IDEFLOPPY_DEBUG_BUGS
if (bcount) {
- printk(KERN_ERR "%s: leftover data in idefloppy_output_buffers, bcount == %d\n", drive->name, bcount);
+ printk(KERN_ERR "%s: leftover data in idefloppy_output_buffers,"
+ " bcount == %d\n", drive->name, bcount);
idefloppy_write_zeros(drive, bcount);
}
#endif
@@ -619,7 +212,8 @@ static void idefloppy_update_buffers (ide_drive_t *drive, idefloppy_pc_t *pc)
* of the request queue, before the current request, so that it will be
* processed immediately, on the next pass through the driver.
*/
-static void idefloppy_queue_pc_head (ide_drive_t *drive,idefloppy_pc_t *pc,struct request *rq)
+static void idefloppy_queue_pc_head (ide_drive_t *drive,idefloppy_pc_t *pc,
+ struct request *rq)
{
struct ide_floppy_obj *floppy = drive->driver_data;
@@ -632,7 +226,7 @@ static void idefloppy_queue_pc_head (ide_drive_t *drive,idefloppy_pc_t *pc,struc
static idefloppy_pc_t *idefloppy_next_pc_storage (ide_drive_t *drive)
{
- idefloppy_floppy_t *floppy = drive->driver_data;
+ idefloppy_t *floppy = drive->driver_data;
if (floppy->pc_stack_index == IDEFLOPPY_PC_STACK)
floppy->pc_stack_index=0;
@@ -641,7 +235,7 @@ static idefloppy_pc_t *idefloppy_next_pc_storage (ide_drive_t *drive)
static struct request *idefloppy_next_rq_storage (ide_drive_t *drive)
{
- idefloppy_floppy_t *floppy = drive->driver_data;
+ idefloppy_t *floppy = drive->driver_data;
if (floppy->rq_stack_index == IDEFLOPPY_PC_STACK)
floppy->rq_stack_index = 0;
@@ -652,9 +246,10 @@ static struct request *idefloppy_next_rq_storage (ide_drive_t *drive)
* idefloppy_analyze_error is called on each failed packet command retry
* to analyze the request sense.
*/
-static void idefloppy_analyze_error (ide_drive_t *drive,idefloppy_request_sense_result_t *result)
+static void idefloppy_analyze_error (ide_drive_t *drive,
+ rq_sense_res_t *result)
{
- idefloppy_floppy_t *floppy = drive->driver_data;
+ idefloppy_t *floppy = drive->driver_data;
floppy->sense_key = result->sense_key;
floppy->asc = result->asc;
@@ -673,15 +268,18 @@ static void idefloppy_analyze_error (ide_drive_t *drive,idefloppy_request_sense_
static void idefloppy_request_sense_callback (ide_drive_t *drive)
{
- idefloppy_floppy_t *floppy = drive->driver_data;
+ idefloppy_t *floppy = drive->driver_data;
+ u8 *buf = floppy->pc->buffer;
debug_log(KERN_INFO "ide-floppy: Reached %s\n", __FUNCTION__);
-
+
if (!floppy->pc->error) {
- idefloppy_analyze_error(drive,(idefloppy_request_sense_result_t *) floppy->pc->buffer);
+ idefloppy_analyze_error(drive, (rq_sense_res_t *) buf);
idefloppy_do_end_request(drive, 1, 0);
} else {
- printk(KERN_ERR "Error in REQUEST SENSE itself - Aborting request!\n");
+ printk(KERN_ERR "Error in REQUEST SENSE itself - "
+ "Aborting request!\n");
+
idefloppy_do_end_request(drive, 0, 0);
}
}
@@ -691,8 +289,8 @@ static void idefloppy_request_sense_callback (ide_drive_t *drive)
*/
static void idefloppy_pc_callback (ide_drive_t *drive)
{
- idefloppy_floppy_t *floppy = drive->driver_data;
-
+ idefloppy_t *floppy = drive->driver_data;
+
debug_log(KERN_INFO "ide-floppy: Reached %s\n", __FUNCTION__);
idefloppy_do_end_request(drive, floppy->pc->error ? 0 : 1, 0);
@@ -714,7 +312,7 @@ static void idefloppy_init_pc (idefloppy_pc_t *pc)
static void idefloppy_create_request_sense_cmd (idefloppy_pc_t *pc)
{
- idefloppy_init_pc(pc);
+ idefloppy_init_pc(pc);
pc->c[0] = IDEFLOPPY_REQUEST_SENSE_CMD;
pc->c[4] = 255;
pc->request_transfer = 18;
@@ -745,7 +343,7 @@ static void idefloppy_retry_pc (ide_drive_t *drive)
*/
static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive)
{
- idefloppy_floppy_t *floppy = drive->driver_data;
+ idefloppy_t *floppy = drive->driver_data;
atapi_status_t status;
atapi_bcount_t bcount;
atapi_ireason_t ireason;
@@ -867,7 +465,9 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive)
pc->current_position += bcount.all;
BUG_ON(HWGROUP(drive)->handler != NULL);
- ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL); /* And set the interrupt handler again */
+
+ /* And set the interrupt handler again */
+ ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL);
return ide_started;
}
@@ -879,7 +479,7 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive)
static ide_startstop_t idefloppy_transfer_pc (ide_drive_t *drive)
{
ide_startstop_t startstop;
- idefloppy_floppy_t *floppy = drive->driver_data;
+ idefloppy_t *floppy = drive->driver_data;
atapi_ireason_t ireason;
if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
@@ -910,13 +510,13 @@ static ide_startstop_t idefloppy_transfer_pc (ide_drive_t *drive)
* gets in trouble.
*
* So, follow carefully. transfer_pc1 is called as an interrupt (or
- * directly). In either case, when the device says it's ready for a
+ * directly). In either case, when the device says it's ready for a
* packet, we schedule the packet transfer to occur about 2-3 ticks
* later in transfer_pc2.
*/
static int idefloppy_transfer_pc2 (ide_drive_t *drive)
{
- idefloppy_floppy_t *floppy = drive->driver_data;
+ idefloppy_t *floppy = drive->driver_data;
/* Send the actual packet */
HWIF(drive)->atapi_output_bytes(drive, floppy->pc->c, 12);
@@ -926,7 +526,7 @@ static int idefloppy_transfer_pc2 (ide_drive_t *drive)
static ide_startstop_t idefloppy_transfer_pc1 (ide_drive_t *drive)
{
- idefloppy_floppy_t *floppy = drive->driver_data;
+ idefloppy_t *floppy = drive->driver_data;
ide_startstop_t startstop;
atapi_ireason_t ireason;
@@ -941,7 +541,7 @@ static ide_startstop_t idefloppy_transfer_pc1 (ide_drive_t *drive)
"while issuing a packet command\n");
return ide_do_reset(drive);
}
- /*
+ /*
* The following delay solves a problem with ATAPI Zip 100 drives
* where the Busy flag was apparently being deasserted before the
* unit was ready to receive data. This was happening on a
@@ -950,8 +550,8 @@ static ide_startstop_t idefloppy_transfer_pc1 (ide_drive_t *drive)
* used until after the packet is moved in about 50 msec.
*/
BUG_ON(HWGROUP(drive)->handler != NULL);
- ide_set_handler(drive,
- &idefloppy_pc_intr, /* service routine for packet command */
+ ide_set_handler(drive,
+ &idefloppy_pc_intr, /* service routine for packet command */
floppy->ticks, /* wait this long before "failing" */
&idefloppy_transfer_pc2); /* fail == transfer_pc2 */
return ide_started;
@@ -962,7 +562,7 @@ static ide_startstop_t idefloppy_transfer_pc1 (ide_drive_t *drive)
*
* Supresses error messages resulting from Medium not present
*/
-static inline int idefloppy_should_report_error(idefloppy_floppy_t *floppy)
+static inline int idefloppy_should_report_error(idefloppy_t *floppy)
{
if (floppy->sense_key == 0x02 &&
floppy->asc == 0x3a &&
@@ -976,7 +576,7 @@ static inline int idefloppy_should_report_error(idefloppy_floppy_t *floppy)
*/
static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *pc)
{
- idefloppy_floppy_t *floppy = drive->driver_data;
+ idefloppy_t *floppy = drive->driver_data;
ide_hwif_t *hwif = drive->hwif;
atapi_feature_t feature;
atapi_bcount_t bcount;
@@ -1061,7 +661,7 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p
/* immediate */
pkt_xfer_routine = &idefloppy_transfer_pc;
}
-
+
if (test_bit (IDEFLOPPY_DRQ_INTERRUPT, &floppy->flags)) {
/* Issue the packet command */
ide_execute_command(drive, WIN_PACKETCMD,
@@ -1127,10 +727,11 @@ static void idefloppy_create_format_unit_cmd (idefloppy_pc_t *pc, int b, int l,
/*
* A mode sense command is used to "sense" floppy parameters.
*/
-static void idefloppy_create_mode_sense_cmd (idefloppy_pc_t *pc, u8 page_code, u8 type)
+static void idefloppy_create_mode_sense_cmd (idefloppy_pc_t *pc, u8 page_code,
+ u8 type)
{
- u16 length = sizeof(idefloppy_mode_parameter_header_t);
-
+ u16 length = sizeof(idefloppy_mode_par_hdr_t);
+
idefloppy_init_pc(pc);
pc->c[0] = IDEFLOPPY_MODE_SENSE_CMD;
pc->c[1] = 0;
@@ -1164,7 +765,8 @@ static void idefloppy_create_test_unit_ready_cmd(idefloppy_pc_t *pc)
pc->c[0] = IDEFLOPPY_TEST_UNIT_READY_CMD;
}
-static void idefloppy_create_rw_cmd (idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, struct request *rq, unsigned long sector)
+static void idefloppy_create_rw_cmd (idefloppy_t *floppy, idefloppy_pc_t *pc,
+ struct request *rq, unsigned long sector)
{
int block = sector / floppy->bs_factor;
int blocks = rq->nr_sectors / floppy->bs_factor;
@@ -1194,7 +796,7 @@ static void idefloppy_create_rw_cmd (idefloppy_floppy_t *floppy, idefloppy_pc_t
}
static void
-idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, struct request *rq)
+idefloppy_blockpc_cmd(idefloppy_t *floppy, idefloppy_pc_t *pc, struct request *rq)
{
idefloppy_init_pc(pc);
pc->callback = &idefloppy_rw_callback;
@@ -1206,7 +808,7 @@ idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, struct req
pc->buffer = rq->data;
if (rq->bio)
set_bit(PC_DMA_RECOMMENDED, &pc->flags);
-
+
/*
* possibly problematic, doesn't look like ide-floppy correctly
* handled scattered requests if dma fails...
@@ -1215,11 +817,12 @@ idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, struct req
}
/*
- * idefloppy_do_request is our request handling function.
+ * idefloppy_do_request is our request handling function.
*/
-static ide_startstop_t idefloppy_do_request (ide_drive_t *drive, struct request *rq, sector_t block_s)
+static ide_startstop_t idefloppy_do_request (ide_drive_t *drive,
+ struct request *rq, sector_t block_s)
{
- idefloppy_floppy_t *floppy = drive->driver_data;
+ idefloppy_t *floppy = drive->driver_data;
idefloppy_pc_t *pc;
unsigned long block = (unsigned long)block_s;
@@ -1233,10 +836,14 @@ static ide_startstop_t idefloppy_do_request (ide_drive_t *drive, struct request
if (rq->errors >= ERROR_MAX) {
if (floppy->failed_pc != NULL) {
if (idefloppy_should_report_error(floppy))
- printk(KERN_ERR "ide-floppy: %s: I/O error, pc = %2x,"
- " key = %2x, asc = %2x, ascq = %2x\n",
- drive->name, floppy->failed_pc->c[0],
- floppy->sense_key, floppy->asc, floppy->ascq);
+ printk(KERN_ERR "ide-floppy: %s: I/O error,"
+ " pc = %2x, key = %2x, asc = %2x,"
+ " ascq = %2x\n",
+ drive->name,
+ floppy->failed_pc->c[0],
+ floppy->sense_key,
+ floppy->asc,
+ floppy->ascq);
}
else
printk(KERN_ERR "ide-floppy: %s: I/O error\n",
@@ -1293,55 +900,62 @@ static int idefloppy_queue_pc_tail (ide_drive_t *drive,idefloppy_pc_t *pc)
*/
static int idefloppy_get_flexible_disk_page (ide_drive_t *drive)
{
- idefloppy_floppy_t *floppy = drive->driver_data;
+ idefloppy_t *floppy = drive->driver_data;
idefloppy_pc_t pc;
- idefloppy_mode_parameter_header_t *header;
- idefloppy_flexible_disk_page_t *page;
+ idefloppy_mode_par_hdr_t *header;
+ idefloppy_flex_disk_page_t *page;
int capacity, lba_capacity;
- idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE, MODE_SENSE_CURRENT);
+ idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE,
+ MODE_SENSE_CURRENT);
if (idefloppy_queue_pc_tail(drive,&pc)) {
printk(KERN_ERR "ide-floppy: Can't get flexible disk "
"page parameters\n");
return 1;
}
- header = (idefloppy_mode_parameter_header_t *) pc.buffer;
+ header = (idefloppy_mode_par_hdr_t *) pc.buffer;
floppy->wp = header->wp;
set_disk_ro(floppy->disk, floppy->wp);
- page = (idefloppy_flexible_disk_page_t *) (header + 1);
+ page = (idefloppy_flex_disk_page_t *) (header + 1);
page->transfer_rate = ntohs(page->transfer_rate);
page->sector_size = ntohs(page->sector_size);
page->cyls = ntohs(page->cyls);
page->rpm = ntohs(page->rpm);
capacity = page->cyls * page->heads * page->sectors * page->sector_size;
- if (memcmp (page, &floppy->flexible_disk_page, sizeof (idefloppy_flexible_disk_page_t)))
+
+ if (memcmp (page, &floppy->flex_disk_page,
+ sizeof (idefloppy_flex_disk_page_t)))
+
printk(KERN_INFO "%s: %dkB, %d/%d/%d CHS, %d kBps, "
"%d sector size, %d rpm\n",
drive->name, capacity / 1024, page->cyls,
page->heads, page->sectors,
page->transfer_rate / 8, page->sector_size, page->rpm);
- floppy->flexible_disk_page = *page;
+ floppy->flex_disk_page = *page;
drive->bios_cyl = page->cyls;
drive->bios_head = page->heads;
drive->bios_sect = page->sectors;
lba_capacity = floppy->blocks * floppy->block_size;
+
if (capacity < lba_capacity) {
printk(KERN_NOTICE "%s: The disk reports a capacity of %d "
"bytes, but the drive only handles %d\n",
drive->name, lba_capacity, capacity);
- floppy->blocks = floppy->block_size ? capacity / floppy->block_size : 0;
+ floppy->blocks = floppy->block_size ?
+ capacity / floppy->block_size : 0;
}
+
return 0;
}
static int idefloppy_get_capability_page(ide_drive_t *drive)
{
- idefloppy_floppy_t *floppy = drive->driver_data;
+ idefloppy_t *floppy = drive->driver_data;
idefloppy_pc_t pc;
- idefloppy_mode_parameter_header_t *header;
- idefloppy_capabilities_page_t *page;
+ idefloppy_mode_par_hdr_t *header;
+ idefloppy_cap_page_t *page;
floppy->srfp = 0;
idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_CAPABILITIES_PAGE,
@@ -1352,8 +966,8 @@ static int idefloppy_get_capability_page(ide_drive_t *drive)
return 1;
}
- header = (idefloppy_mode_parameter_header_t *) pc.buffer;
- page= (idefloppy_capabilities_page_t *)(header+1);
+ header = (idefloppy_mode_par_hdr_t *) pc.buffer;
+ page= (idefloppy_cap_page_t *)(header+1);
floppy->srfp = page->srfp;
return (0);
}
@@ -1364,12 +978,12 @@ static int idefloppy_get_capability_page(ide_drive_t *drive)
*/
static int idefloppy_get_capacity (ide_drive_t *drive)
{
- idefloppy_floppy_t *floppy = drive->driver_data;
+ idefloppy_t *floppy = drive->driver_data;
idefloppy_pc_t pc;
idefloppy_capacity_header_t *header;
- idefloppy_capacity_descriptor_t *descriptor;
+ idefloppy_cap_desc_t *descriptor;
int i, descriptors, rc = 1, blocks, length;
-
+
drive->bios_cyl = 0;
drive->bios_head = drive->bios_sect = 0;
floppy->blocks = 0;
@@ -1382,14 +996,14 @@ static int idefloppy_get_capacity (ide_drive_t *drive)
return 1;
}
header = (idefloppy_capacity_header_t *) pc.buffer;
- descriptors = header->length / sizeof(idefloppy_capacity_descriptor_t);
- descriptor = (idefloppy_capacity_descriptor_t *) (header + 1);
+ descriptors = header->length / sizeof(idefloppy_cap_desc_t);
+ descriptor = (idefloppy_cap_desc_t *) (header + 1);
for (i = 0; i < descriptors; i++, descriptor++) {
blocks = descriptor->blocks = ntohl(descriptor->blocks);
length = descriptor->length = ntohs(descriptor->length);
- if (!i)
+ if (!i)
{
switch (descriptor->dc) {
/* Clik! drive returns this instead of CAPACITY_CURRENT */
@@ -1402,7 +1016,8 @@ static int idefloppy_get_capacity (ide_drive_t *drive)
break;
case CAPACITY_CURRENT:
/* Normal Zip/LS-120 disks */
- if (memcmp(descriptor, &floppy->capacity, sizeof (idefloppy_capacity_descriptor_t)))
+ if (memcmp(descriptor, &floppy->capacity,
+ sizeof (idefloppy_cap_desc_t)))
printk(KERN_INFO "%s: %dkB, %d blocks, %d "
"sector size\n", drive->name,
blocks * length / 1024, blocks, length);
@@ -1453,31 +1068,31 @@ static int idefloppy_get_capacity (ide_drive_t *drive)
}
/*
-** Obtain the list of formattable capacities.
-** Very similar to idefloppy_get_capacity, except that we push the capacity
-** descriptors to userland, instead of our own structures.
-**
-** Userland gives us the following structure:
-**
-** struct idefloppy_format_capacities {
-** int nformats;
-** struct {
-** int nblocks;
-** int blocksize;
-** } formats[];
-** } ;
-**
-** userland initializes nformats to the number of allocated formats[]
-** records. On exit we set nformats to the number of records we've
-** actually initialized.
-**
-*/
+ * Obtain the list of formattable capacities.
+ * Very similar to idefloppy_get_capacity, except that we push the capacity
+ * descriptors to userland, instead of our own structures.
+ *
+ * Userland gives us the following structure:
+ *
+ * struct idefloppy_format_capacities {
+ * int nformats;
+ * struct {
+ * int nblocks;
+ * int blocksize;
+ * } formats[];
+ * } ;
+ *
+ * userland initializes nformats to the number of allocated formats[]
+ * records. On exit we set nformats to the number of records we've
+ * actually initialized.
+ *
+ */
static int idefloppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
{
idefloppy_pc_t pc;
idefloppy_capacity_header_t *header;
- idefloppy_capacity_descriptor_t *descriptor;
+ idefloppy_cap_desc_t *descriptor;
int i, descriptors, blocks, length;
int u_array_size;
int u_index;
@@ -1496,17 +1111,17 @@ static int idefloppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
}
header = (idefloppy_capacity_header_t *) pc.buffer;
descriptors = header->length /
- sizeof(idefloppy_capacity_descriptor_t);
- descriptor = (idefloppy_capacity_descriptor_t *) (header + 1);
+ sizeof(idefloppy_cap_desc_t);
+ descriptor = (idefloppy_cap_desc_t *) (header + 1);
u_index = 0;
argp = arg + 1;
/*
- ** We always skip the first capacity descriptor. That's the
- ** current capacity. We are interested in the remaining descriptors,
- ** the formattable capacities.
- */
+ * We always skip the first capacity descriptor. That's the
+ * current capacity. We are interested in the remaining descriptors,
+ * the formattable capacities.
+ */
for (i=0; i<descriptors; i++, descriptor++) {
if (u_index >= u_array_size)
@@ -1534,20 +1149,20 @@ static int idefloppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
}
/*
-** Send ATAPI_FORMAT_UNIT to the drive.
-**
-** Userland gives us the following structure:
-**
-** struct idefloppy_format_command {
-** int nblocks;
-** int blocksize;
-** int flags;
-** } ;
-**
-** flags is a bitmask, currently, the only defined flag is:
-**
-** 0x01 - verify media after format.
-*/
+ * Send ATAPI_FORMAT_UNIT to the drive.
+ *
+ * Userland gives us the following structure:
+ *
+ * struct idefloppy_format_command {
+ * int nblocks;
+ * int blocksize;
+ * int flags;
+ * } ;
+ *
+ * flags is a bitmask, currently, the only defined flag is:
+ *
+ * 0x01 - verify media after format.
+ */
static int idefloppy_begin_format(ide_drive_t *drive, int __user *arg)
{
@@ -1573,18 +1188,18 @@ static int idefloppy_begin_format(ide_drive_t *drive, int __user *arg)
}
/*
-** Get ATAPI_FORMAT_UNIT progress indication.
-**
-** Userland gives a pointer to an int. The int is set to a progress
-** indicator 0-65536, with 65536=100%.
-**
-** If the drive does not support format progress indication, we just check
-** the dsc bit, and return either 0 or 65536.
-*/
+ * Get ATAPI_FORMAT_UNIT progress indication.
+ *
+ * Userland gives a pointer to an int. The int is set to a progress
+ * indicator 0-65536, with 65536=100%.
+ *
+ * If the drive does not support format progress indication, we just check
+ * the dsc bit, and return either 0 or 65536.
+ */
static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg)
{
- idefloppy_floppy_t *floppy = drive->driver_data;
+ idefloppy_t *floppy = drive->driver_data;
idefloppy_pc_t pc;
int progress_indication = 0x10000;
@@ -1622,7 +1237,7 @@ static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg)
*/
static sector_t idefloppy_capacity (ide_drive_t *drive)
{
- idefloppy_floppy_t *floppy = drive->driver_data;
+ idefloppy_t *floppy = drive->driver_data;
unsigned long capacity = floppy->blocks * floppy->bs_factor;
return capacity;
@@ -1647,7 +1262,7 @@ static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id)
if ((gcw.device_type == 5) &&
!strstr(id->model, "CD-ROM") &&
strstr(id->model, "ZIP"))
- gcw.device_type = 0;
+ gcw.device_type = 0;
#endif
#if IDEFLOPPY_DEBUG_INFO
@@ -1669,7 +1284,7 @@ static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id)
default: sprintf(buffer, "Reserved");
}
printk(KERN_INFO "Device Type: %x - %s\n", gcw.device_type, buffer);
- printk(KERN_INFO "Removable: %s\n",gcw.removable ? "Yes":"No");
+ printk(KERN_INFO "Removable: %s\n",gcw.removable ? "Yes":"No");
switch (gcw.drq_type) {
case 0: sprintf(buffer, "Microprocessor DRQ");break;
case 1: sprintf(buffer, "Interrupt DRQ");break;
@@ -1689,9 +1304,12 @@ static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id)
printk(KERN_INFO "Write buffer size(?): %d bytes\n",id->buf_size*512);
printk(KERN_INFO "DMA: %s",id->capability & 0x01 ? "Yes\n":"No\n");
printk(KERN_INFO "LBA: %s",id->capability & 0x02 ? "Yes\n":"No\n");
- printk(KERN_INFO "IORDY can be disabled: %s",id->capability & 0x04 ? "Yes\n":"No\n");
- printk(KERN_INFO "IORDY supported: %s",id->capability & 0x08 ? "Yes\n":"Unknown\n");
- printk(KERN_INFO "ATAPI overlap supported: %s",id->capability & 0x20 ? "Yes\n":"No\n");
+ printk(KERN_INFO "IORDY can be disabled: %s",
+ id->capability & 0x04 ? "Yes\n":"No\n");
+ printk(KERN_INFO "IORDY supported: %s",
+ id->capability & 0x08 ? "Yes\n":"Unknown\n");
+ printk(KERN_INFO "ATAPI overlap supported: %s",
+ id->capability & 0x20 ? "Yes\n":"No\n");
printk(KERN_INFO "PIO Cycle Timing Category: %d\n",id->tPIO);
printk(KERN_INFO "DMA Cycle Timing Category: %d\n",id->tDMA);
printk(KERN_INFO "Single Word DMA supported modes:\n");
@@ -1713,12 +1331,16 @@ static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id)
sprintf(buffer, "Not supported");
else
sprintf(buffer, "%d ns",id->eide_dma_min);
- printk(KERN_INFO "Minimum Multi-word DMA cycle per word: %s\n", buffer);
+ printk(KERN_INFO "Minimum Multi-word DMA cycle per word: %s\n",
+ buffer);
+
if (id->eide_dma_time == 0)
sprintf(buffer, "Not supported");
else
sprintf(buffer, "%d ns",id->eide_dma_time);
- printk(KERN_INFO "Manufacturer\'s Recommended Multi-word cycle: %s\n", buffer);
+ printk(KERN_INFO "Manufacturer\'s Recommended Multi-word"
+ " cycle: %s\n", buffer);
+
if (id->eide_pio == 0)
sprintf(buffer, "Not supported");
else
@@ -1731,7 +1353,8 @@ static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id)
sprintf(buffer, "%d ns",id->eide_pio_iordy);
printk(KERN_INFO "Minimum PIO cycle with IORDY: %s\n", buffer);
} else
- printk(KERN_INFO "According to the device, fields 64-70 are not valid.\n");
+ printk(KERN_INFO "According to the device, fields 64-70 are not"
+ " valid.\n");
#endif /* IDEFLOPPY_DEBUG_INFO */
if (gcw.protocol != 2)
@@ -1741,7 +1364,8 @@ static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id)
else if (!gcw.removable)
printk(KERN_ERR "ide-floppy: The removable flag is not set\n");
else if (gcw.drq_type == 3) {
- printk(KERN_ERR "ide-floppy: Sorry, DRQ type %d not supported\n", gcw.drq_type);
+ printk(KERN_ERR "ide-floppy: Sorry, DRQ type %d not supported\n",
+ gcw.drq_type);
} else if (gcw.packet_size != 0) {
printk(KERN_ERR "ide-floppy: Packet size is not 12 bytes long\n");
} else
@@ -1752,15 +1376,23 @@ static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id)
#ifdef CONFIG_IDE_PROC_FS
static void idefloppy_add_settings(ide_drive_t *drive)
{
- idefloppy_floppy_t *floppy = drive->driver_data;
+ idefloppy_t *floppy = drive->driver_data;
-/*
- * drive setting name read/write data type min max mul_factor div_factor data pointer set function
- */
- ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 1023, 1, 1, &drive->bios_cyl, NULL);
- ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &drive->bios_head, NULL);
- ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL);
- ide_add_setting(drive, "ticks", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &floppy->ticks, NULL);
+ /*
+ * drive setting name read/write data_type min max mul_factor div_factor
+ * data_pointer set_function
+ */
+ ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 1023, 1, 1,
+ &drive->bios_cyl, NULL);
+
+ ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE,0, 255, 1, 1,
+ &drive->bios_head,NULL);
+
+ ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE,0, 63, 1, 1,
+ &drive->bios_sect,NULL);
+
+ ide_add_setting(drive, "ticks", SETTING_RW, TYPE_BYTE,0, 255, 1, 1,
+ &floppy->ticks, NULL);
}
#else
static inline void idefloppy_add_settings(ide_drive_t *drive) { ; }
@@ -1769,7 +1401,7 @@ static inline void idefloppy_add_settings(ide_drive_t *drive) { ; }
/*
* Driver initialization.
*/
-static void idefloppy_setup (ide_drive_t *drive, idefloppy_floppy_t *floppy)
+static void idefloppy_setup (ide_drive_t *drive, idefloppy_t *floppy)
{
struct idefloppy_id_gcw gcw;
@@ -1805,14 +1437,13 @@ static void idefloppy_setup (ide_drive_t *drive, idefloppy_floppy_t *floppy)
set_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags);
}
-
(void) idefloppy_get_capacity(drive);
idefloppy_add_settings(drive);
}
static void ide_floppy_remove(ide_drive_t *drive)
{
- idefloppy_floppy_t *floppy = drive->driver_data;
+ idefloppy_t *floppy = drive->driver_data;
struct gendisk *g = floppy->disk;
ide_proc_unregister_driver(drive, floppy->driver);
@@ -1846,8 +1477,8 @@ static int proc_idefloppy_read_capacity
}
static ide_proc_entry_t idefloppy_proc[] = {
- { "capacity", S_IFREG|S_IRUGO, proc_idefloppy_read_capacity, NULL },
- { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL },
+ { "capacity", S_IFREG|S_IRUGO, proc_idefloppy_read_capacity, NULL },
+ { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL },
{ NULL, 0, NULL, NULL }
};
#endif /* CONFIG_IDE_PROC_FS */
@@ -1904,10 +1535,10 @@ static int idefloppy_open(struct inode *inode, struct file *filp)
if (idefloppy_get_capacity (drive)
&& (filp->f_flags & O_NDELAY) == 0
/*
- ** Allow O_NDELAY to open a drive without a disk, or with
- ** an unreadable disk, so that we can get the format
- ** capacity of the drive or begin the format - Sam
- */
+ * Allow O_NDELAY to open a drive without a disk, or with
+ * an unreadable disk, so that we can get the format
+ * capacity of the drive or begin the format - Sam
+ */
) {
ret = -EIO;
goto out_put_floppy;
@@ -1942,7 +1573,7 @@ static int idefloppy_release(struct inode *inode, struct file *filp)
struct ide_floppy_obj *floppy = ide_floppy_g(disk);
ide_drive_t *drive = floppy->drive;
idefloppy_pc_t pc;
-
+
debug_log(KERN_INFO "Reached idefloppy_release\n");
if (floppy->openers == 1) {
@@ -1992,7 +1623,8 @@ static int idefloppy_ioctl(struct inode *inode, struct file *file,
if (floppy->openers > 1)
return -EBUSY;
- /* The IOMEGA Clik! Drive doesn't support this command - no room for an eject mechanism */
+ /* The IOMEGA Clik! Drive doesn't support this command -
+ * no room for an eject mechanism */
if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) {
idefloppy_create_prevent_cmd(&pc, prevent);
(void) idefloppy_queue_pc_tail(drive, &pc);
@@ -2012,8 +1644,8 @@ static int idefloppy_ioctl(struct inode *inode, struct file *file,
return -EPERM;
if (floppy->openers > 1) {
- /* Don't format if someone is using the disk */
+ /* Don't format if someone is using the disk */
clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS,
&floppy->flags);
return -EBUSY;
@@ -2026,11 +1658,11 @@ static int idefloppy_ioctl(struct inode *inode, struct file *file,
clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags);
return err;
/*
- ** Note, the bit will be cleared when the device is
- ** closed. This is the cleanest way to handle the
- ** situation where the drive does not support
- ** format progress reporting.
- */
+ * Note, the bit will be cleared when the device is
+ * closed. This is the cleanest way to handle the
+ * situation where the drive does not support
+ * format progress reporting.
+ */
case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS:
return idefloppy_get_format_progress(drive, argp);
}
@@ -2083,7 +1715,7 @@ static struct block_device_operations idefloppy_ops = {
static int ide_floppy_probe(ide_drive_t *drive)
{
- idefloppy_floppy_t *floppy;
+ idefloppy_t *floppy;
struct gendisk *g;
if (!strstr("ide-floppy", drive->driver_req))
@@ -2093,15 +1725,18 @@ static int ide_floppy_probe(ide_drive_t *drive)
if (drive->media != ide_floppy)
goto failed;
if (!idefloppy_identify_device (drive, drive->id)) {
- printk (KERN_ERR "ide-floppy: %s: not supported by this version of ide-floppy\n", drive->name);
+ printk (KERN_ERR "ide-floppy: %s: not supported by this version"
+ " of ide-floppy\n", drive->name);
goto failed;
}
if (drive->scsi) {
- printk("ide-floppy: passing drive %s to ide-scsi emulation.\n", drive->name);
+ printk("ide-floppy: passing drive %s to ide-scsi emulation.\n",
+ drive->name);
goto failed;
}
- if ((floppy = kzalloc(sizeof (idefloppy_floppy_t), GFP_KERNEL)) == NULL) {
- printk (KERN_ERR "ide-floppy: %s: Can't allocate a floppy structure\n", drive->name);
+ if ((floppy = kzalloc(sizeof (idefloppy_t), GFP_KERNEL)) == NULL) {
+ printk (KERN_ERR "ide-floppy: %s: Can't allocate a floppy"
+ " structure\n", drive->name);
goto failed;
}
diff --git a/drivers/ide/ide-floppy.h b/drivers/ide/ide-floppy.h
new file mode 100644
index 0000000..ecfafa6
--- /dev/null
+++ b/drivers/ide/ide-floppy.h
@@ -0,0 +1,382 @@
+#ifndef _IDE_FLOPPY_H
+#define _IDE_FLOPPY_H
+
+/*
+ * The following are used to debug the driver.
+ */
+#define IDEFLOPPY_DEBUG_LOG 0
+#define IDEFLOPPY_DEBUG_INFO 0
+#define IDEFLOPPY_DEBUG_BUGS 1
+
+/* #define IDEFLOPPY_DEBUG(fmt, args...) printk(KERN_INFO fmt, ## args) */
+#define IDEFLOPPY_DEBUG( fmt, args... )
+
+#if IDEFLOPPY_DEBUG_LOG
+#define debug_log printk
+#else
+#define debug_log(fmt, args... ) do {} while(0)
+#endif
+
+/*
+ * Some drives require a longer irq timeout.
+ */
+#define IDEFLOPPY_WAIT_CMD (5 * WAIT_CMD)
+
+/*
+ * After each failed packet command we issue a request sense command
+ * and retry the packet command IDEFLOPPY_MAX_PC_RETRIES times.
+ */
+#define IDEFLOPPY_MAX_PC_RETRIES 3
+
+/*
+ * With each packet command, we allocate a buffer of
+ * IDEFLOPPY_PC_BUFFER_SIZE bytes.
+ */
+#define IDEFLOPPY_PC_BUFFER_SIZE 256
+
+/*
+ * In various places in the driver, we need to allocate storage
+ * for packet commands and requests, which will remain valid while
+ * we leave the driver to wait for an interrupt or a timeout event.
+ */
+#define IDEFLOPPY_PC_STACK (10 + IDEFLOPPY_MAX_PC_RETRIES)
+
+/*
+ * Our view of a packet command.
+ */
+typedef struct idefloppy_packet_command_s {
+ u8 c[12]; /* Actual packet bytes */
+ int retries; /* On each retry, we increment
+ retries */
+ int error; /* Error code */
+ int request_transfer; /* Bytes to transfer */
+ int actually_transferred; /* Bytes actually transferred */
+ int buffer_size; /* Size of our data buffer */
+ int b_count; /* Missing/Available data on the
+ current buffer */
+ struct request *rq; /* The corresponding request */
+ u8 *buffer; /* Data buffer */
+ u8 *current_position; /* Pointer into the above buffer */
+ void (*callback) (ide_drive_t *); /* Called when this packet
+ command is completed */
+ u8 pc_buffer[IDEFLOPPY_PC_BUFFER_SIZE]; /* Temporary buffer */
+ unsigned long flags; /* Status/Action bit flags: long
+ for set_bit */
+} idefloppy_pc_t;
+
+/*
+ * Packet command flag bits.
+ */
+#define PC_ABORT 0 /* Set when an error is considered \
+ normal - We won't retry */
+
+#define PC_DMA_RECOMMENDED 2 /* 1 when we prefer to use DMA \
+ if possible */
+
+#define PC_DMA_IN_PROGRESS 3 /* 1 while DMA in progress */
+
+#define PC_DMA_ERROR 4 /* 1 when encountered problem \
+ during DMA */
+
+#define PC_WRITING 5 /* Data direction */
+
+#define PC_SUPPRESS_ERROR 6 /* Suppress error reporting */
+
+/*
+ * Removable Block Access Capabilities Page
+ */
+typedef struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ unsigned page_code :6; /* Page code - Should be 0x1b */
+ unsigned reserved1_6 :1; /* Reserved */
+ unsigned ps :1; /* Should be 0 */
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ unsigned ps :1; /* Should be 0 */
+ unsigned reserved1_6 :1; /* Reserved */
+ unsigned page_code :6; /* Page code - Should be 0x1b */
+#else
+#error "Bitfield endianness not defined! Check your byteorder.h"
+#endif
+ u8 page_length; /* Page Length - Should be 0xa */
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ unsigned reserved2 :6;
+ unsigned srfp :1; /* Supports reporting progress
+ of format */
+ unsigned sflp :1; /* System floppy type device */
+ unsigned tlun :3; /* Total logical units supported
+ by the device */
+ unsigned reserved3 :3;
+ unsigned sml :1; /* Single / Multiple lun supported */
+ unsigned ncd :1; /* Non cd optical device */
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ unsigned sflp :1; /* System floppy type device */
+ unsigned srfp :1; /* Supports reporting progress
+ of format */
+ unsigned reserved2 :6;
+ unsigned ncd :1; /* Non cd optical device */
+ unsigned sml :1; /* Single / Multiple lun supported */
+ unsigned reserved3 :3;
+ unsigned tlun :3; /* Total logical units supported
+ by the device */
+#else
+#error "Bitfield endianness not defined! Check your byteorder.h"
+#endif
+ u8 reserved[8];
+} idefloppy_cap_page_t;
+
+/*
+ * Flexible disk page.
+ */
+typedef struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ unsigned page_code :6; /* Page code - Should be 0x5 */
+ unsigned reserved1_6 :1; /* Reserved */
+ unsigned ps :1; /* The device is capable of
+ saving the page */
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ unsigned ps :1; /* The device is capable of
+ saving the page */
+ unsigned reserved1_6 :1; /* Reserved */
+ unsigned page_code :6; /* Page code - Should be 0x5 */
+#else
+#error "Bitfield endianness not defined! Check your byteorder.h"
+#endif
+ u8 page_length; /* Page Length - Should be 0x1e */
+ u16 transfer_rate; /* In kilobits per second */
+ u8 heads, sectors; /* Number of heads, Number of
+ sectors per track */
+ u16 sector_size; /* Byes per sector */
+ u16 cyls; /* Number of cylinders */
+ u8 reserved10[10];
+ u8 motor_delay; /* Motor off delay */
+ u8 reserved21[7];
+ u16 rpm; /* Rotations per minute */
+ u8 reserved30[2];
+} idefloppy_flex_disk_page_t;
+
+/*
+ * Format capacity
+ */
+typedef struct {
+ u8 reserved[3];
+ u8 length; /* Length of the following
+ descriptors in bytes */
+} idefloppy_capacity_header_t;
+
+typedef struct {
+ u32 blocks; /* Number of blocks */
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ unsigned dc :2; /* Descriptor Code */
+ unsigned reserved :6;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ unsigned reserved :6;
+ unsigned dc :2; /* Descriptor Code */
+#else
+#error "Bitfield endianness not defined! Check your byteorder.h"
+#endif
+ u8 length_msb; /* Block Length (MSB)*/
+ u16 length; /* Block Length */
+} idefloppy_cap_desc_t;
+
+#define CAPACITY_INVALID 0x00
+#define CAPACITY_UNFORMATTED 0x01
+#define CAPACITY_CURRENT 0x02
+#define CAPACITY_NO_CARTRIDGE 0x03
+
+/*
+ * Most of our global data which we need to save even as we leave the
+ * driver due to an interrupt or a timer event is stored in a variable
+ * of type idefloppy_t, defined below.
+ */
+typedef struct ide_floppy_obj {
+ ide_drive_t *drive;
+ ide_driver_t *driver;
+ struct gendisk *disk;
+ struct kref kref;
+ unsigned int openers; /* protected by BKL for now */
+
+ /* Current packet command */
+ idefloppy_pc_t *pc;
+ /* Last failed packet command */
+ idefloppy_pc_t *failed_pc;
+ /* Packet command stack */
+ idefloppy_pc_t pc_stack[IDEFLOPPY_PC_STACK];
+ /* Next free packet command storage space */
+ int pc_stack_index;
+ struct request rq_stack[IDEFLOPPY_PC_STACK];
+ /* We implement a circular array */
+ int rq_stack_index;
+
+ /*
+ * Last error information
+ */
+ u8 sense_key, asc, ascq;
+ /* delay this long before sending packet command */
+ u8 ticks;
+ int progress_indication;
+
+ /*
+ * Device information
+ */
+ /* Current format */
+ int blocks, block_size, bs_factor;
+ /* Last format capacity */
+ idefloppy_cap_desc_t capacity;
+ /* Copy of the flexible disk page */
+ idefloppy_flex_disk_page_t flex_disk_page;
+ /* Write protect */
+ int wp;
+ /* Supports format progress report */
+ int srfp;
+ /* Status/Action flags */
+ unsigned long flags;
+} idefloppy_t;
+
+#define IDEFLOPPY_TICKS_DELAY HZ/20 /* default delay for ZIP 100 (50ms) */
+
+/*
+ * Floppy flag bits values.
+ */
+#define IDEFLOPPY_DRQ_INTERRUPT 0 /* DRQ interrupt device */
+#define IDEFLOPPY_MEDIA_CHANGED 1 /* Media may have changed */
+#define IDEFLOPPY_USE_READ12 2 /* Use READ12/WRITE12 or \
+ READ10/WRITE10 */
+
+#define IDEFLOPPY_FORMAT_IN_PROGRESS 3 /* Format in progress */
+#define IDEFLOPPY_CLIK_DRIVE 4 /* Avoid commands not supported \
+ in Clik drive */
+
+#define IDEFLOPPY_ZIP_DRIVE 5 /* Requires BH algorithm for \
+ packets */
+
+/*
+ * ATAPI floppy drive packet commands
+ */
+#define IDEFLOPPY_FORMAT_UNIT_CMD 0x04
+#define IDEFLOPPY_INQUIRY_CMD 0x12
+#define IDEFLOPPY_MODE_SELECT_CMD 0x55
+#define IDEFLOPPY_MODE_SENSE_CMD 0x5a
+#define IDEFLOPPY_READ10_CMD 0x28
+#define IDEFLOPPY_READ12_CMD 0xa8
+#define IDEFLOPPY_READ_CAPACITY_CMD 0x23
+#define IDEFLOPPY_REQUEST_SENSE_CMD 0x03
+#define IDEFLOPPY_PREVENT_REMOVAL_CMD 0x1e
+#define IDEFLOPPY_SEEK_CMD 0x2b
+#define IDEFLOPPY_START_STOP_CMD 0x1b
+#define IDEFLOPPY_TEST_UNIT_READY_CMD 0x00
+#define IDEFLOPPY_VERIFY_CMD 0x2f
+#define IDEFLOPPY_WRITE10_CMD 0x2a
+#define IDEFLOPPY_WRITE12_CMD 0xaa
+#define IDEFLOPPY_WRITE_VERIFY_CMD 0x2e
+
+/*
+ * Defines for the mode sense command
+ */
+#define MODE_SENSE_CURRENT 0x00
+#define MODE_SENSE_CHANGEABLE 0x01
+#define MODE_SENSE_DEFAULT 0x02
+#define MODE_SENSE_SAVED 0x03
+
+/*
+ * IOCTLs used in low-level formatting.
+ */
+
+#define IDEFLOPPY_IOCTL_FORMAT_SUPPORTED 0x4600
+#define IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY 0x4601
+#define IDEFLOPPY_IOCTL_FORMAT_START 0x4602
+#define IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS 0x4603
+
+/*
+ * Error codes which are returned in rq->errors to the higher part
+ * of the driver.
+ */
+#define IDEFLOPPY_ERROR_GENERAL 101
+
+/*
+ * The following is used to format the general configuration word of
+ * the ATAPI IDENTIFY DEVICE command.
+ */
+struct idefloppy_id_gcw {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ unsigned packet_size :2; /* Packet Size */
+ unsigned reserved234 :3; /* Reserved */
+ unsigned drq_type :2; /* Command packet DRQ type */
+ unsigned removable :1; /* Removable media */
+ unsigned device_type :5; /* Device type */
+ unsigned reserved13 :1; /* Reserved */
+ unsigned protocol :2; /* Protocol type */
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ unsigned protocol :2; /* Protocol type */
+ unsigned reserved13 :1; /* Reserved */
+ unsigned device_type :5; /* Device type */
+ unsigned removable :1; /* Removable media */
+ unsigned drq_type :2; /* Command packet DRQ type */
+ unsigned reserved234 :3; /* Reserved */
+ unsigned packet_size :2; /* Packet Size */
+#else
+#error "Bitfield endianness not defined! Check your byteorder.h"
+#endif
+};
+
+/*
+ * REQUEST SENSE packet command result - Data Format.
+ */
+typedef struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ unsigned error_code :7; /* Current error (0x70) */
+ unsigned valid :1; /* The information field conforms
+ to SFF-8070i */
+ u8 reserved1 :8; /* Reserved */
+ unsigned sense_key :4; /* Sense Key */
+ unsigned reserved2_4 :1; /* Reserved */
+ unsigned ili :1; /* Incorrect Length Indicator */
+ unsigned reserved2_67 :2;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ unsigned valid :1; /* The information field conforms
+ to SFF-8070i */
+ unsigned error_code :7; /* Current error (0x70) */
+ u8 reserved1 :8; /* Reserved */
+ unsigned reserved2_67 :2;
+ unsigned ili :1; /* Incorrect Length Indicator */
+ unsigned reserved2_4 :1; /* Reserved */
+ unsigned sense_key :4; /* Sense Key */
+#else
+#error "Bitfield endianness not defined! Check your byteorder.h"
+#endif
+ u32 information __attribute__ ((packed));
+ u8 asl; /* Additional sense length (n-7) */
+ u32 command_specific; /* Additional command specific
+ information */
+ u8 asc; /* Additional Sense Code */
+ u8 ascq; /* Additional Sense Code Qualifier */
+ u8 replaceable_unit_code; /* Field Replaceable Unit Code */
+ u8 sksv[3];
+ u8 pad[2]; /* Padding to 20 bytes */
+} rq_sense_res_t;
+
+/*
+ * Pages of the SELECT SENSE / MODE SENSE packet commands.
+ */
+#define IDEFLOPPY_CAPABILITIES_PAGE 0x1b
+#define IDEFLOPPY_FLEXIBLE_DISK_PAGE 0x05
+
+/*
+ * Mode Parameter Header for the MODE SENSE packet command
+ */
+typedef struct {
+ u16 mode_data_length; /* Length of the following data
+ transfer */
+ u8 medium_type; /* Medium Type */
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ unsigned reserved3 :7;
+ unsigned wp :1; /* Write protect */
+#elif defined(__BIG_ENDIAN_BITFIELD)
+ unsigned wp :1; /* Write protect */
+ unsigned reserved3 :7;
+#else
+#error "Bitfield endianness not defined! Check your byteorder.h"
+#endif
+ u8 reserved[4];
+} idefloppy_mode_par_hdr_t;
+
+#endif /* _IDE_FLOPPY_H */
--
1.5.3.7
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists