smartctl version 5.37 [i386-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Western Digital Caviar SE family Device Model: WDC WD2000JB-00EVA0 Serial Number: WD-WMAEH2782398 Firmware Version: 15.05R15 User Capacity: 200,049,647,616 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Jan 28 12:39:08 2008 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 249) Self-test routine in progress... 90% of test remaining. Total time to complete Offline data collection: (6942) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 88) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 194 194 051 Pre-fail Always - 12 3 Spin_Up_Time 0x0007 180 124 021 Pre-fail Always - 1500 4 Start_Stop_Count 0x0032 100 100 040 Old_age Always - 182 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 062 062 000 Old_age Always - 27779 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 178 194 Temperature_Celsius 0x0022 120 253 000 Old_age Always - 30 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0009 200 155 051 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 12 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 12 occurred at disk power-on lifetime: 472 hours (19 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 58 8b 3d 07 e0 Error: Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 00 00 c8 00 00 58 00 00 00:03:35.550 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00:03:35.550 NOP [Abort queued commands] 00 00 ef 00 00 45 00 00 00:03:35.550 NOP [Abort queued commands] 00 00 27 00 00 00 00 00 00:03:35.550 NOP [Abort queued commands] 00 00 07 00 00 89 3d 00 00:03:35.550 NOP [Abort queued commands] Error 11 occurred at disk power-on lifetime: 472 hours (19 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 58 8b 3d 07 e0 Error: Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 00 00 c8 00 00 58 00 00 00:03:33.500 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00:03:33.500 NOP [Abort queued commands] 00 00 ef 00 00 45 00 00 00:03:33.500 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00:03:33.500 NOP [Abort queued commands] 00 00 c8 00 00 58 00 00 00:03:33.500 NOP [Abort queued commands] Error 10 occurred at disk power-on lifetime: 472 hours (19 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 58 8b 3d 07 e0 Error: Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 00 00 c8 00 00 58 00 00 00:03:31.400 NOP [Abort queued commands] 00 00 ec 00 00 00 00 00 00:03:31.400 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00:03:31.400 NOP [Abort queued commands] 00 00 ec 00 00 00 00 00 00:03:31.400 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00:03:31.400 NOP [Abort queued commands] Error 9 occurred at disk power-on lifetime: 472 hours (19 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 58 8b 3d 07 e0 Error: Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 00 00 c8 00 00 58 00 00 00:03:29.350 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00:03:29.350 NOP [Abort queued commands] 00 00 ef 00 00 45 00 00 00:03:29.350 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00:03:29.350 NOP [Abort queued commands] 00 00 c8 00 00 58 00 00 00:03:29.350 NOP [Abort queued commands] Error 8 occurred at disk power-on lifetime: 472 hours (19 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 58 8b 3d 07 e0 Error: Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 00 00 c8 00 00 58 00 00 00:03:27.150 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00:03:27.150 NOP [Abort queued commands] 00 00 ef 00 00 45 00 00 00:03:27.150 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00:03:27.150 NOP [Abort queued commands] 00 00 c8 00 00 58 00 00 00:03:27.150 NOP [Abort queued commands] SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 460 - # 2 Extended offline Completed without error 00% 452 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.