| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 1 Feb 2008 17:34:10 +1000
From: Greg Ungerer <gerg@...pgear.com>
To: torvalds@...ux-foundation.org
Cc: gerg@...inux.org, linux-kernel@...r.kernel.org
Subject: [M68KNOMMU]: platform setup for 520x ColdFire parts
Switch to platform style configuration for 520x ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.
Signed-off-by: Greg Ungerer <gerg@...inux.org>
---
diff -Naurp linux-2.6.24/arch/m68knommu/platform/520x/config.c linux-2.6.24-uc0/arch/m68knommu/platform/520x/config.c
--- linux-2.6.24/arch/m68knommu/platform/520x/config.c 2008-01-25 08:58:37.000000000 +1000
+++ linux-2.6.24-uc0/arch/m68knommu/platform/520x/config.c 2007-11-30 11:03:11.000000000 +1000
@@ -5,7 +5,7 @@
*
* Copyright (C) 2005, Freescale (www.freescale.com)
* Copyright (C) 2005, Intec Automation (mike@...roidmicros.com)
- * Copyright (C) 1999-2003, Greg Ungerer (gerg@...pgear.com)
+ * Copyright (C) 1999-2007, Greg Ungerer (gerg@...pgear.com)
* Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
*/
@@ -13,21 +13,93 @@
#include <linux/kernel.h>
#include <linux/param.h>
+#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/io.h>
#include <asm/machdep.h>
-#include <asm/dma.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
/***************************************************************************/
-/*
- * DMA channel base address table.
- */
-unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
-unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
+void coldfire_reset(void);
/***************************************************************************/
-void coldfire_reset(void);
+static struct mcf_platform_uart m520x_uart_platform[] = {
+ {
+ .mapbase = MCF_MBAR + MCFUART_BASE1,
+ .irq = MCFINT_VECBASE + MCFINT_UART0,
+ },
+ {
+ .mapbase = MCF_MBAR + MCFUART_BASE2,
+ .irq = MCFINT_VECBASE + MCFINT_UART1,
+ },
+ {
+ .mapbase = MCF_MBAR + MCFUART_BASE3,
+ .irq = MCFINT_VECBASE + MCFINT_UART2,
+ },
+ { },
+};
+
+static struct platform_device m520x_uart = {
+ .name = "mcfuart",
+ .id = 0,
+ .dev.platform_data = m520x_uart_platform,
+};
+
+static struct platform_device *m520x_devices[] __initdata = {
+ &m520x_uart,
+};
+
+/***************************************************************************/
+
+#define INTC0 (MCF_MBAR + MCFICM_INTC0)
+
+static void __init m520x_uart_init_line(int line, int irq)
+{
+ u32 imr;
+ u16 par;
+ u8 par2;
+
+ writeb(0x03, INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line);
+
+ imr = readl(INTC0 + MCFINTC_IMRL);
+ imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1);
+ writel(imr, INTC0 + MCFINTC_IMRL);
+
+ switch (line) {
+ case 0:
+ par = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART);
+ par |= MCF_GPIO_PAR_UART_PAR_UTXD0 |
+ MCF_GPIO_PAR_UART_PAR_URXD0;
+ writew(par, MCF_IPSBAR + MCF_GPIO_PAR_UART);
+ break;
+ case 1:
+ par = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART);
+ par |= MCF_GPIO_PAR_UART_PAR_UTXD1 |
+ MCF_GPIO_PAR_UART_PAR_URXD1;
+ writew(par, MCF_IPSBAR + MCF_GPIO_PAR_UART);
+ break;
+ case 2:
+ par2 = readb(MCF_IPSBAR + MCF_GPIO_PAR_FECI2C);
+ par2 &= ~0x0F;
+ par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 |
+ MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2;
+ writeb(par2, MCF_IPSBAR + MCF_GPIO_PAR_FECI2C);
+ break;
+ }
+}
+
+static void __init m520x_uarts_init(void)
+{
+ const int nrlines = ARRAY_SIZE(m520x_uart_platform);
+ int line;
+
+ for (line = 0; (line < nrlines); line++)
+ m520x_uart_init_line(line, m520x_uart_platform[line].irq);
+}
/***************************************************************************/
@@ -42,9 +114,20 @@ void mcf_autovector(unsigned int vec)
/***************************************************************************/
-void config_BSP(char *commandp, int size)
+void __init config_BSP(char *commandp, int size)
{
mach_reset = coldfire_reset;
+ m520x_uarts_init();
+}
+
+/***************************************************************************/
+
+static int __init init_BSP(void)
+{
+ platform_add_devices(m520x_devices, ARRAY_SIZE(m520x_devices));
+ return 0;
}
+arch_initcall(init_BSP);
+
/***************************************************************************/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists