| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 25 Feb 2008 20:24:51 -0400
From: Kevin Winchester <kjwinchester@...il.com>
To: Pavel Machek <pavel@....cz>
CC: "Rafael J. Wysocki" <rjw@...k.pl>,
LKML <linux-kernel@...r.kernel.org>, len.brown@...el.com,
linux-pm@...ts.linux-foundation.org
Subject: Re: broken suspend to ram with velocity driver
Pavel Machek wrote:
> Hi!
>
>>> velocity_suspend() seems to be at fault.
>> (gdb) l *(velocity_suspend+0x37)
>> 0xc0244665 is in velocity_suspend (drivers/net/via-velocity.c:3399).
>> 3394 if(!netif_running(vptr->dev))
>> 3395 return 0;
>> 3396
>> 3397 netif_device_detach(vptr->dev);
>> 3398
>> 3399 spin_lock_irqsave(&vptr->lock, flags);
>> 3400 pci_save_state(pdev);
>> 3401 #ifdef ETHTOOL_GWOL
>> 3402 if (vptr->flags & VELOCITY_FLAGS_WOL_ENABLED) {
>> 3403 velocity_get_ip(vptr);
>> (gdb)
>> 3404 velocity_save_context(vptr, &vptr->context);
>> 3405 velocity_shutdown(vptr);
>> 3406 velocity_set_wol(vptr);
>> 3407 pci_enable_wake(pdev, PCI_D3hot, 1);
>> 3408 pci_set_power_state(pdev, PCI_D3hot);
>> 3409 } else {
>> 3410 velocity_save_context(vptr, &vptr->context);
>> 3411 velocity_shutdown(vptr);
>> 3412 pci_disable_device(pdev);
>> 3413 pci_set_power_state(pdev, pci_choose_state(pdev, state));
>> (gdb)
>> 3414 }
>> 3415 #else
>> 3416 pci_set_power_state(pdev, pci_choose_state(pdev, state));
>> 3417 #endif
>> 3418 spin_unlock_irqrestore(&vptr->lock, flags);
>> 3419 return 0;
>> 3420 }
>>
>> So velocity_suspend calls spin_lock_irqsave, and then pci_set_power_state which msleep()s. Is that the root problem here? (I've added Ingo & Peter to the CC list since they may have some comments on the scheduler/lockdep parts of the trace).
>
> Looks like velocity is broken. Can you try to unload it before sleep
> to see if the rest of suspend works for you?
>
(Trimmed cc, since this is really just more of a PM discussion)
No modules here...
I recompiled the kernel without the velocity driver, and got behaviour more comparable to the other failures I've experienced in the past:
Feb 25 20:18:46 alekhine kernel: [ 73.564725] PM: Syncing filesystems ... done.
Feb 25 20:19:14 alekhine kernel: [ 73.580807] Freezing user space processes ... (elapsed 0.01 seconds) done.
Feb 25 20:19:14 alekhine kernel: [ 73.595524] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Feb 25 20:19:14 alekhine kernel: [ 73.595839] ACPI: Preparing to enter system sleep state S3
Feb 25 20:19:14 alekhine kernel: [ 73.697308] Suspending console(s)
Feb 25 20:19:14 alekhine kernel: [ 73.700386] sd 3:0:0:0: [sda] Synchronizing SCSI cache
Feb 25 20:19:14 alekhine kernel: [ 73.783185] sd 3:0:0:0: [sda] Stopping disk
Feb 25 20:19:14 alekhine kernel: [ 73.784302] ACPI: PCI interrupt for device 0000:00:11.5 disabled
Feb 25 20:19:14 alekhine kernel: [ 73.794585] ACPI: PCI interrupt for device 0000:00:10.4 disabled
Feb 25 20:19:14 alekhine kernel: [ 73.805370] ACPI: PCI interrupt for device 0000:00:10.3 disabled
Feb 25 20:19:14 alekhine kernel: [ 73.816170] ACPI: PCI interrupt for device 0000:00:10.2 disabled
Feb 25 20:19:14 alekhine kernel: [ 73.826999] ACPI: PCI interrupt for device 0000:00:10.1 disabled
Feb 25 20:19:14 alekhine kernel: [ 73.837833] ACPI: PCI interrupt for device 0000:00:10.0 disabled
Feb 25 20:19:14 alekhine kernel: [ 73.848668] ACPI: PCI interrupt for device 0000:00:0f.1 disabled
Feb 25 20:19:14 alekhine kernel: [ 73.859346] ACPI: PCI interrupt for device 0000:00:0f.0 disabled
Feb 25 20:19:14 alekhine kernel: [ 73.882878] Intel machine check architecture supported.
Feb 25 20:19:14 alekhine kernel: [ 73.882878] Intel machine check reporting enabled on CPU#0.
Feb 25 20:19:14 alekhine kernel: [ 73.884890] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 20
Feb 25 20:19:14 alekhine kernel: [ 73.884892] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 20
Feb 25 20:19:14 alekhine kernel: [ 73.890893] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
Feb 25 20:19:14 alekhine kernel: [ 73.890893] usb usb2: root hub lost power or was reset
Feb 25 20:19:14 alekhine kernel: [ 73.901724] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
Feb 25 20:19:14 alekhine kernel: [ 73.901724] usb usb3: root hub lost power or was reset
Feb 25 20:19:14 alekhine kernel: [ 73.912597] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
Feb 25 20:19:14 alekhine kernel: [ 73.912597] usb usb4: root hub lost power or was reset
Feb 25 20:19:14 alekhine kernel: [ 73.923472] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
Feb 25 20:19:14 alekhine kernel: [ 73.923472] usb usb5: root hub lost power or was reset
Feb 25 20:19:14 alekhine kernel: [ 73.934336] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
Feb 25 20:19:14 alekhine kernel: [ 73.945209] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
Feb 25 20:19:14 alekhine kernel: [ 73.947465] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Feb 25 20:19:14 alekhine kernel: [ 73.947660] sd 3:0:0:0: [sda] Starting disk
Feb 25 20:19:14 alekhine kernel: [ 74.183122] ata3.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out
Feb 25 20:19:14 alekhine kernel: [ 74.183122] ata3.01: ACPI cmd ef/03:42:00:00:00:b0 filtered out
Feb 25 20:19:14 alekhine kernel: [ 74.336028] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
Feb 25 20:19:14 alekhine kernel: [ 74.336028] ata3.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
Feb 25 20:19:14 alekhine kernel: [ 74.491252] ata3.00: configured for UDMA/33
Feb 25 20:19:14 alekhine kernel: [ 74.678330] ata3.01: configured for UDMA/33
Feb 25 20:19:14 alekhine kernel: [ 78.168897] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
Feb 25 20:19:14 alekhine kernel: [ 78.168897] ata4.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
Feb 25 20:19:14 alekhine kernel: [ 78.172976] ata4.00: configured for UDMA/100
Feb 25 20:19:14 alekhine kernel: [ 78.177133] sd 3:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
Feb 25 20:19:14 alekhine kernel: [ 78.177133] sd 3:0:0:0: [sda] Write Protect is off
Feb 25 20:19:14 alekhine kernel: [ 78.177133] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 25 20:19:14 alekhine kernel: [ 78.720991] Restarting tasks ... <6>usb 2-1: USB disconnect, address 2
Feb 25 20:19:14 alekhine kernel: [ 78.766838] done.
Feb 25 20:19:14 alekhine kernel: [ 78.951998] usb 2-1: new low speed USB device using uhci_hcd and address 4
Feb 25 20:19:14 alekhine kernel: [ 79.114037] usb 2-1: configuration #1 chosen from 1 choice
Feb 25 20:19:14 alekhine kernel: [ 79.138166] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input5
Feb 25 20:19:14 alekhine kernel: [ 79.180828] input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:10.0-1
Feb 25 20:19:14 alekhine kernel: [ 79.181059] usb 2-2: USB disconnect, address 3
Feb 25 20:19:15 alekhine kernel: [ 79.436567] usb 2-2: new low speed USB device using uhci_hcd and address 5
Feb 25 20:19:15 alekhine kernel: [ 79.606180] usb 2-2: configuration #1 chosen from 1 choice
Feb 25 20:19:15 alekhine kernel: [ 79.623893] input: Microsoft Microsoft<AE> Digital Media Pro Keyboard as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input6
Feb 25 20:19:15 alekhine kernel: [ 79.663140] input: USB HID v1.11 Keyboard [Microsoft Microsoft<AE> Digital Media Pro Keyboard] on usb-0000:00:10.0-2
Feb 25 20:19:15 alekhine kernel: [ 79.697610] input: Microsoft Microsoft<AE> Digital Media Pro Keyboard as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.1/input/input7
Feb 25 20:19:15 alekhine kernel: [ 79.721948] input: USB HID v1.11 Device [Microsoft Microsoft<AE> Digital Media Pro Keyboard] on usb-0000:00:10.0-2
I don't see anything there that would explain the failure, but the console never comes back, and I am forced to hard reset the box. Anything else I can try?
Thanks,
--
Kevin Winchester
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists