[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.25-rc7-amd64 (Debian 2.6.25~rc7-1~experimental.1~snapshot.11011) (waldi@debian.org) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Sun Mar 30 17:36:02 CEST 2008 [ 0.000000] Command line: root=/dev/mapper/lucky-root ro vga=791 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f7b0000 (usable) [ 0.000000] BIOS-e820: 000000007f7b0000 - 000000007f7c5400 (reserved) [ 0.000000] BIOS-e820: 000000007f7c5400 - 000000007f7e7fb8 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f7e7fb8 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 522160) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000F77A0, 0024 (r2 HP ) [ 0.000000] ACPI: XSDT 7F7C81C4, 0074 (r1 HPQOEM SLIC-MPC 1 HP 1) [ 0.000000] ACPI: FACP 7F7C8084, 00F4 (r4 HP 30C9 3 HP 1) [ 0.000000] ACPI: DSDT 7F7C84C0, 13484 (r1 HP nc2500 10000 MSFT 3000001) [ 0.000000] ACPI: FACS 7F7E7D80, 0040 [ 0.000000] ACPI: SLIC 7F7C8238, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1) [ 0.000000] ACPI: HPET 7F7C83B0, 0038 (r1 HP 30C9 1 HP 1) [ 0.000000] ACPI: APIC 7F7C83E8, 0068 (r1 HP 30C9 1 HP 1) [ 0.000000] ACPI: MCFG 7F7C8450, 003C (r1 HP 30C9 1 HP 1) [ 0.000000] ACPI: TCPA 7F7C848C, 0032 (r2 HP 30C9 1 HP 1) [ 0.000000] ACPI: SSDT 7F7DB944, 02BE (r1 HP HPQPAT 1 MSFT 3000001) [ 0.000000] ACPI: SSDT 7F7DC586, 025F (r1 HP Cpu0Tst 3000 INTL 20060317) [ 0.000000] ACPI: SSDT 7F7DC7E5, 00A6 (r1 HP Cpu1Tst 3000 INTL 20060317) [ 0.000000] ACPI: SSDT 7F7DC88B, 04D7 (r1 HP CpuPm 3000 INTL 20060317) [ 0.000000] ACPI: DMI detected: Hewlett-Packard [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007f7b0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 522160) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007f7b0000 [ 0.000000] NODE_DATA [000000000000c000 - 0000000000012fff] [ 0.000000] bootmap [0000000000013000 - 0000000000022ef7] pages 10 [ 0.000000] early res: 0 [0-fff] BIOS data page [ 0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE [ 0.000000] early res: 2 [200000-6464a7] TEXT DATA BSS [ 0.000000] early res: 3 [37909000-37fef295] RAMDISK [ 0.000000] early res: 4 [9fc00-a0bff] EBDA [ 0.000000] early res: 5 [8000-bfff] PGTABLE [ 0.000000] No mptable found. [ 0.000000] [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 [ 0.000000] [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0 [ 0.000000] [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0 [ 0.000000] [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0 [ 0.000000] [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0 [ 0.000000] [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0 [ 0.000000] [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0 [ 0.000000] [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0 [ 0.000000] [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0 [ 0.000000] [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0 [ 0.000000] [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0 [ 0.000000] [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0 [ 0.000000] [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0 [ 0.000000] [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 522160 [ 0.000000] On node 0 totalpages: 522063 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1102 pages reserved [ 0.000000] DMA zone: 2841 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7082 pages used for memmap [ 0.000000] DMA32 zone: 510982 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 35224 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 513823 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/mapper/lucky-root ro vga=791 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC calibrated against PM_TIMER [ 0.000002] time.c: Detected 1196.998 MHz processor. [ 0.000033] Console: colour dummy device 80x25 [ 0.000037] console [tty0] enabled [ 0.000312] Checking aperture... [ 0.000331] Calgary: detecting Calgary via BIOS EBDA area [ 0.000334] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.004000] Memory: 2047828k/2088640k available (2205k kernel code, 40424k reserved, 1027k data, 372k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] hpet clockevent registered [ 0.080009] Calibrating delay using timer specific routine.. 2397.27 BogoMIPS (lpj=4794551) [ 0.080086] Security Framework initialized [ 0.080096] SELinux: Disabled at boot. [ 0.080103] Capability LSM initialized [ 0.080473] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.082281] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.083199] Mount-cache hash table entries: 256 [ 0.083436] Initializing cgroup subsys ns [ 0.083445] Initializing cgroup subsys cpuacct [ 0.083478] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.083485] CPU: L2 cache: 2048K [ 0.083492] CPU 0/0 -> Node 0 [ 0.083496] CPU: Physical Processor ID: 0 [ 0.083501] CPU: Processor Core ID: 0 [ 0.083514] CPU0: Thermal monitoring handled by SMI [ 0.083516] using mwait in idle threads. [ 0.084014] ACPI: Core revision 20070126 [ 0.159849] Using local APIC timer interrupts. [ 0.160012] APIC timer calibration result 8312498 [ 0.160015] Detected 8.312 MHz APIC timer. [ 0.160257] Booting processor 1/2 APIC 0x1 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 2394.01 BogoMIPS (lpj=4788021) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 2048K [ 0.004000] CPU 1/1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] Intel(R) Core(TM)2 Duo CPU U7600 @ 1.20GHz stepping 0d [ 0.248605] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.252053] Brought up 2 CPUs [ 0.252179] CPU0 attaching sched-domain: [ 0.252183] domain 0: span 00000003 [ 0.252186] groups: 00000001 00000002 [ 0.252191] domain 1: span 00000003 [ 0.252194] groups: 00000003 [ 0.252198] CPU1 attaching sched-domain: [ 0.252201] domain 0: span 00000003 [ 0.252203] groups: 00000002 00000001 [ 0.252208] domain 1: span 00000003 [ 0.252210] groups: 00000003 [ 0.252623] net_namespace: 1016 bytes [ 0.252633] Booting paravirtualized kernel on bare hardware [ 0.252958] NET: Registered protocol family 16 [ 0.253267] ACPI: bus type pci registered [ 0.253402] PCI: BIOS Bug: MCFG area at f8000000 is not E820-reserved [ 0.253409] PCI: Not using MMCONFIG. [ 0.253414] PCI: Using configuration type 1 [ 0.256981] ACPI: EC: Look up EC in DSDT [ 0.006529] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.352927] ACPI: Interpreter enabled [ 0.352935] ACPI: (supports S0 S3 S4 S5) [ 0.352961] ACPI: Using IOAPIC for interrupt routing [ 0.373140] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.373149] ACPI: EC: driver started in interrupt mode [ 0.373254] ACPI: PCI Root Bridge [C003] (0000:00) [ 0.374568] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.374580] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO [ 0.375467] PCI: Transparent bridge - 0000:00:1e.0 [ 0.375547] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT] [ 0.376539] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B2._PRT] [ 0.376876] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11F._PRT] [ 0.377174] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C133._PRT] [ 0.457624] ACPI: PCI Interrupt Link [C12F] (IRQs *10 11) [ 0.458064] ACPI: PCI Interrupt Link [C130] (IRQs *10 11) [ 0.458499] ACPI: PCI Interrupt Link [C131] (IRQs 10 *11) [ 0.458932] ACPI: PCI Interrupt Link [C132] (IRQs 10 11) *5 [ 0.459369] ACPI: PCI Interrupt Link [C142] (IRQs *10 11) [ 0.459788] ACPI: PCI Interrupt Link [C143] (IRQs 10 11) *0, disabled. [ 0.460232] ACPI: PCI Interrupt Link [C144] (IRQs 10 *11) [ 0.460437] ACPI Exception (pci_link-0184): AE_NOT_FOUND, Evaluating _PRS [20070126] [ 0.460798] ACPI: Power Resource [C29F] (on) [ 0.460907] ACPI: Power Resource [C1C7] (off) [ 0.461123] ACPI: Power Resource [C3AD] (off) [ 0.461329] ACPI: Power Resource [C3B0] (off) [ 0.461535] ACPI: Power Resource [C3C3] (off) [ 0.461741] ACPI: Power Resource [C3C4] (off) [ 0.461945] ACPI: Power Resource [C3C5] (off) [ 0.462148] ACPI: Power Resource [C3C6] (off) [ 0.462352] ACPI: Power Resource [C3C7] (off) [ 0.462616] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.462672] pnp: PnP ACPI init [ 0.462686] ACPI: bus type pnp registered [ 0.462990] 00:00: calling quirk 0xffffffff8035b6ca: quirk_system_pci_resources+0x0/0x173() [ 0.463069] pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.470412] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.471723] pnp 00:02: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.471808] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.471891] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.471970] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.472054] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.472449] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.472543] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.472638] pnp 00:09: Plug and Play ACPI device, IDs SYN0130 SYN0100 SYN0002 PNP0f13 (active) [ 0.473563] 00:0a: calling quirk 0xffffffff8035b6ca: quirk_system_pci_resources+0x0/0x173() [ 0.473649] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.477980] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active) [ 0.478106] 00:0c: calling quirk 0xffffffff8035b6ca: quirk_system_pci_resources+0x0/0x173() [ 0.478202] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.480866] 00:0d: calling quirk 0xffffffff8035b6ca: quirk_system_pci_resources+0x0/0x173() [ 0.480975] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.481004] pnp: PnP ACPI: found 14 devices [ 0.481011] ACPI: ACPI bus type pnp unregistered [ 0.481290] usbcore: registered new interface driver usbfs [ 0.481382] usbcore: registered new interface driver hub [ 0.481448] usbcore: registered new device driver usb [ 0.481654] PCI: Using ACPI for IRQ routing [ 0.481661] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.508048] NET: Registered protocol family 8 [ 0.508054] NET: Registered protocol family 20 [ 0.508116] PCI-GART: No AMD northbridge found. [ 0.508130] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 11 [ 0.508139] hpet0: 3 64-bit timers, 14318180 Hz [ 0.509204] ACPI: RTC can wake from S4 [ 0.512044] Switched to high resolution mode on CPU 0 [ 0.260027] Switched to high resolution mode on CPU 1 [ 0.524049] pnp: the driver 'system' has been registered [ 0.524065] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.524074] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 0.524082] system 00:00: iomem range 0x100000-0x7f7fffff could not be reserved [ 0.524090] system 00:00: driver attached [ 0.524104] system 00:0a: ioport range 0x500-0x55f has been reserved [ 0.524114] system 00:0a: ioport range 0x800-0x80f has been reserved [ 0.524122] system 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved [ 0.524132] system 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved [ 0.524139] system 00:0a: driver attached [ 0.524148] system 00:0c: ioport range 0x4d0-0x4d1 has been reserved [ 0.524156] system 00:0c: ioport range 0x2f8-0x2ff has been reserved [ 0.524163] system 00:0c: ioport range 0x3f8-0x3ff has been reserved [ 0.524170] system 00:0c: ioport range 0x1000-0x107f has been reserved [ 0.524178] system 00:0c: ioport range 0x1100-0x113f has been reserved [ 0.524185] system 00:0c: ioport range 0x1200-0x121f has been reserved [ 0.524193] system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved [ 0.524201] system 00:0c: iomem range 0xfec00000-0xfec000ff could not be reserved [ 0.524210] system 00:0c: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 0.524219] system 00:0c: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 0.524228] system 00:0c: iomem range 0xfed90000-0xfed99fff could not be reserved [ 0.524236] system 00:0c: driver attached [ 0.524244] system 00:0d: iomem range 0xcee00-0xcffff has been reserved [ 0.524251] system 00:0d: iomem range 0xd2000-0xd3fff has been reserved [ 0.524259] system 00:0d: iomem range 0xfeda0000-0xfedbffff could not be reserved [ 0.524268] system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.524276] system 00:0d: driver attached [ 0.524915] PCI: Bridge: 0000:00:1c.0 [ 0.524921] IO window: disabled. [ 0.524930] MEM window: disabled. [ 0.524938] PREFETCH window: disabled. [ 0.524950] PCI: Bridge: 0000:00:1c.1 [ 0.524954] IO window: disabled. [ 0.524964] MEM window: 0xe0000000-0xe00fffff [ 0.524973] PREFETCH window: disabled. [ 0.524990] PCI: Bus 3, cardbus bridge: 0000:02:06.0 [ 0.524995] IO window: 0x00003000-0x000030ff [ 0.525005] IO window: 0x00003400-0x000034ff [ 0.525014] PREFETCH window: 0x88000000-0x8bffffff [ 0.525024] MEM window: 0x8c000000-0x8fffffff [ 0.525033] PCI: Bridge: 0000:00:1e.0 [ 0.525040] IO window: 3000-3fff [ 0.525050] MEM window: 0xe0100000-0xe03fffff [ 0.525059] PREFETCH window: 0x0000000088000000-0x000000008bffffff [ 0.525103] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.525117] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.525149] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 0.525162] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.525180] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.525204] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 0.525269] NET: Registered protocol family 2 [ 0.560220] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.561439] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.564750] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.565650] TCP: Hash tables configured (established 262144 bind 65536) [ 0.565658] TCP reno registered [ 0.576334] checking if image is initramfs... it is [ 1.544147] Freeing initrd memory: 7064k freed [ 1.302450] audit: initializing netlink socket (disabled) [ 1.302486] type=2000 audit(1206956948.549:1): initialized [ 1.302799] Total HugeTLB memory allocated, 0 [ 1.302957] VFS: Disk quotas dquot_6.5.1 [ 1.303003] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.303140] io scheduler noop registered [ 1.303146] io scheduler anticipatory registered [ 1.303152] io scheduler deadline registered [ 1.303174] io scheduler cfq registered (default) [ 1.303191] pci 0000:00:02.0: Boot video device [ 1.303490] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 1.303546] assign_interrupt_mode Found MSI capability [ 1.303612] Allocate Port Service[0000:00:1c.0:pcie00] [ 1.303758] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 1.303812] assign_interrupt_mode Found MSI capability [ 1.303873] Allocate Port Service[0000:00:1c.1:pcie00] [ 1.304567] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000900000, using 3072k, total 7616k [ 1.304577] vesafb: mode is 1024x768x16, linelength=2048, pages=3 [ 1.304584] vesafb: scrolling: redraw [ 1.304590] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 1.324650] Console: switching to colour frame buffer device 128x48 [ 1.344940] fb0: VESA VGA frame buffer device [ 1.348618] Real Time Clock Driver v1.12ac [ 1.349161] hpet_resources: 0xfed00000 is busy [ 1.349279] Linux agpgart interface v0.103 [ 1.349441] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.350145] pnp: the driver 'serial' has been registered [ 1.350483] isa bounce pool size: 16 pages [ 1.351884] brd: module loaded [ 1.352111] input: Macintosh mouse button emulation as /class/input/input0 [ 1.352520] pnp: the driver 'i8042 kbd' has been registered [ 1.352538] i8042 kbd 00:08: driver attached [ 1.352584] pnp: the driver 'i8042 aux' has been registered [ 1.352611] i8042 aux 00:09: driver attached [ 1.352659] PNP: PS/2 Controller [PNP0303:C29C,PNP0f13:C29D] at 0x60,0x64 irq 1,12 [ 1.354957] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.355932] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.356099] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.356298] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.356497] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.356696] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.384202] mice: PS/2 mouse device common for all mice [ 1.384446] cpuidle: using governor ladder [ 1.384593] cpuidle: using governor menu [ 1.385299] TCP bic registered [ 1.385430] NET: Registered protocol family 1 [ 1.385615] NET: Registered protocol family 17 [ 1.385990] registered taskstats version 1 [ 1.386283] Freeing unused kernel memory: 372k freed [ 1.408034] input: AT Translated Set 2 keyboard as /class/input/input1 [ 1.667455] ACPI: Transitioning device [C3B1] to D3 [ 1.668216] ACPI: PNP0C0B:00 is registered as cooling_device0 [ 1.672120] ACPI: Fan [C3B1] (off) [ 1.676533] ACPI: Transitioning device [C3B2] to D3 [ 1.680180] ACPI: PNP0C0B:01 is registered as cooling_device1 [ 1.684120] ACPI: Fan [C3B2] (off) [ 1.692275] ACPI: Transitioning device [C3C8] to D3 [ 1.696170] ACPI: PNP0C0B:02 is registered as cooling_device2 [ 1.700124] ACPI: Fan [C3C8] (off) [ 1.708448] ACPI: Transitioning device [C3C9] to D3 [ 1.712171] ACPI: PNP0C0B:03 is registered as cooling_device3 [ 1.716124] ACPI: Fan [C3C9] (off) [ 1.720504] ACPI: Transitioning device [C3CA] to D3 [ 1.724169] ACPI: PNP0C0B:04 is registered as cooling_device4 [ 1.728123] ACPI: Fan [C3CA] (off) [ 1.736384] ACPI: Transitioning device [C3CB] to D3 [ 1.740170] ACPI: PNP0C0B:05 is registered as cooling_device5 [ 1.744124] ACPI: Fan [C3CB] (off) [ 1.752169] ACPI: Transitioning device [C3CC] to D3 [ 1.756174] ACPI: PNP0C0B:06 is registered as cooling_device6 [ 1.760125] ACPI: Fan [C3CC] (off) [ 2.044889] ACPI: SSDT 7F7DBCCA, 023D (r1 HP Cpu0Ist 3000 INTL 20060317) [ 2.052394] ACPI: SSDT 7F7DBF8C, 05FA (r1 HP Cpu0Cst 3001 INTL 20060317) [ 2.071031] Monitor-Mwait will be used to enter C-1 state [ 2.071036] Monitor-Mwait will be used to enter C-2 state [ 2.071234] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 2.072200] ACPI: ACPI0007:00 is registered as cooling_device7 [ 2.076141] ACPI: Processor [CPU0] (supports 8 throttling states) [ 2.080649] ACPI: SSDT 7F7DBC02, 00C8 (r1 HP Cpu1Ist 3000 INTL 20060317) [ 2.084599] ACPI: SSDT 7F7DBF07, 0085 (r1 HP Cpu1Cst 3000 INTL 20060317) [ 1.834505] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 2.091059] Marking TSC unstable due to TSC halts in idle [ 1.836206] ACPI: ACPI0007:01 is registered as cooling_device8 [ 1.840129] ACPI: Processor [CPU1] (supports 8 throttling states) [ 1.848840] ACPI: LNXTHERM:01 is registered as thermal_zone0 [ 1.852468] ACPI: Thermal Zone [TZ6] (25 C) [ 1.877151] ACPI: LNXTHERM:02 is registered as thermal_zone1 [ 1.884428] ACPI: Thermal Zone [TZ0] (36 C) [ 1.895862] ACPI: LNXTHERM:03 is registered as thermal_zone2 [ 1.897449] ACPI: Thermal Zone [TZ1] (40 C) [ 1.907944] ACPI: LNXTHERM:04 is registered as thermal_zone3 [ 1.912265] ACPI: Thermal Zone [TZ3] (29 C) [ 1.928287] ACPI: LNXTHERM:05 is registered as thermal_zone4 [ 2.249594] ACPI: Thermal Zone [TZ4] (28 C) [ 1.950447] ACPI: LNXTHERM:06 is registered as thermal_zone5 [ 2.266800] ACPI: Thermal Zone [TZ5] (66 C) [ 2.440785] USB Universal Host Controller Interface driver v3.0 [ 2.444629] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 2.448589] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 2.448595] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 2.452815] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 2.456629] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00002040 [ 2.460795] usb usb1: configuration #1 chosen from 1 choice [ 2.464628] hub 1-0:1.0: USB hub found [ 2.468597] hub 1-0:1.0: 2 ports detected [ 2.845333] Uniform Multi-Platform E-IDE driver [ 2.847531] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 2.584987] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.588605] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.592585] usb usb1: Product: UHCI Host Controller [ 2.596585] usb usb1: Manufacturer: Linux 2.6.25-rc7-amd64 uhci_hcd [ 2.600585] usb usb1: SerialNumber: 0000:00:1a.0 [ 2.604634] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 2.608595] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 2.608601] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 2.612657] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 2.616629] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00002060 [ 2.620739] usb usb2: configuration #1 chosen from 1 choice [ 2.624621] hub 2-0:1.0: USB hub found [ 2.628594] hub 2-0:1.0: 2 ports detected [ 2.736748] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.740629] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.744631] usb usb2: Product: UHCI Host Controller [ 2.748620] usb usb2: Manufacturer: Linux 2.6.25-rc7-amd64 uhci_hcd [ 2.752618] usb usb2: SerialNumber: 0000:00:1a.1 [ 2.756672] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 2.760631] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 2.760638] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.764688] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 2.768657] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002080 [ 2.772775] usb usb3: configuration #1 chosen from 1 choice [ 2.776656] hub 3-0:1.0: USB hub found [ 2.780629] hub 3-0:1.0: 2 ports detected [ 3.263285] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 2.891436] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.895350] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.899352] usb usb3: Product: UHCI Host Controller [ 2.903351] usb usb3: Manufacturer: Linux 2.6.25-rc7-amd64 uhci_hcd [ 2.907353] usb usb3: SerialNumber: 0000:00:1d.0 [ 2.911392] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22 [ 2.915359] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 2.915366] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.919430] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 2.923428] uhci_hcd 0000:00:1d.1: irq 22, io base 0x000020a0 [ 2.927508] usb usb4: configuration #1 chosen from 1 choice [ 2.931388] hub 4-0:1.0: USB hub found [ 2.935361] hub 4-0:1.0: 2 ports detected [ 2.987664] usb 1-1: configuration #1 chosen from 1 choice [ 2.991767] usb 1-1: New USB device found, idVendor=03f0, idProduct=171d [ 2.995679] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.999671] usb 1-1: Product: HP Integrated Module [ 3.003671] usb 1-1: Manufacturer: Broadcom Corp [ 3.502026] Clocksource tsc unstable (delta = -156435253 ns) [ 3.027480] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.031401] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.035394] usb usb4: Product: UHCI Host Controller [ 3.039396] usb usb4: Manufacturer: Linux 2.6.25-rc7-amd64 uhci_hcd [ 3.043393] usb usb4: SerialNumber: 0000:00:1d.1 [ 3.051411] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 3.059400] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 3.059406] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.063461] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 3.067438] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000020c0 [ 3.075550] usb usb5: configuration #1 chosen from 1 choice [ 3.079431] hub 5-0:1.0: USB hub found [ 3.083404] hub 5-0:1.0: 2 ports detected [ 3.194227] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.198135] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.202136] usb usb5: Product: UHCI Host Controller [ 3.206133] usb usb5: Manufacturer: Linux 2.6.25-rc7-amd64 uhci_hcd [ 3.210136] usb usb5: SerialNumber: 0000:00:1d.2 [ 3.763670] ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 3.821243] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e0101000-e01017ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 3.831070] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 3.833944] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 [ 3.837893] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 3.837899] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 3.841950] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 3.853775] ehci_hcd 0000:00:1a.7: debug port 1 [ 3.853858] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 3.853870] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0621000 [ 3.873881] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.878039] usb usb6: configuration #1 chosen from 1 choice [ 3.881897] hub 6-0:1.0: USB hub found [ 3.885875] hub 6-0:1.0: 4 ports detected [ 3.993988] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.997860] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.001859] usb usb6: Product: EHCI Host Controller [ 4.005859] usb usb6: Manufacturer: Linux 2.6.25-rc7-amd64 ehci_hcd [ 4.009866] usb usb6: SerialNumber: 0000:00:1a.7 [ 4.013910] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 [ 4.017888] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 4.017894] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 4.021954] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 4.033342] ehci_hcd 0000:00:1d.7: debug port 1 [ 4.033879] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 4.033888] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe0628000 [ 3.607254] usb 3-2: configuration #1 chosen from 1 choice [ 3.615143] usb 3-2: can't set config #1, error -71 [ 4.055920] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 4.056084] usb usb7: configuration #1 chosen from 1 choice [ 4.056123] hub 7-0:1.0: USB hub found [ 4.056132] hub 7-0:1.0: 6 ports detected [ 3.619109] usb 3-2: New USB device found, idVendor=08ff, idProduct=2580 [ 3.623026] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.627025] usb 3-2: Product: Fingerprint Sensor [ 4.162421] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.166295] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.170295] usb usb7: Product: EHCI Host Controller [ 4.174295] usb usb7: Manufacturer: Linux 2.6.25-rc7-amd64 ehci_hcd [ 4.178295] usb usb7: SerialNumber: 0000:00:1d.7 [ 4.182792] ICH8M: IDE controller (0x8086:0x2850 rev 0x03) at PCI slot 0000:00:1f.1 [ 4.186306] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 4.190306] ICH8M: not 100% native mode: will probe irqs later [ 4.194305] ICH8M: IDE port disabled [ 4.198301] ide0: BM-DMA at 0x20e0-0x20e7, BIOS settings: hda:DMA, hdb:DMA [ 4.202302] Probing IDE interface ide0... [ 3.881561] usb 1-1: USB disconnect, address 2 [ 4.130786] usb 1-1: new full speed USB device using uhci_hcd and address 3 [ 4.662531] hdb: MATSHITADVD-RAM UJ-842S, ATAPI CD/DVD-ROM drive [ 4.308545] usb 1-1: configuration #1 chosen from 1 choice [ 4.311185] usb 1-1: New USB device found, idVendor=03f0, idProduct=171d [ 4.312555] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.316553] usb 1-1: Product: HP Integrated Module [ 4.320552] usb 1-1: Manufacturer: Broadcom Corp [ 5.006232] hda: TOSHIBA MK8009GAH, ATA DISK drive [ 5.009808] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 5.009875] hda: UDMA/100 mode selected [ 5.013854] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 5.014144] hdb: MWDMA2 mode selected [ 4.564497] usb 3-2: USB disconnect, address 2 [ 5.018100] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 5.032577] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001b249929010210] [ 4.599311] No dock devices found. [ 4.610772] SCSI subsystem initialized [ 4.624147] libata version 3.00 loaded. [ 5.119647] hda: max request size: 128KiB [ 5.120275] hda: 156301488 sectors (80026 MB), CHS=65535/16/63 [ 5.124426] hda: cache flushes supported [ 5.128334] hda: hda1 hda2 hda3 [ 4.685600] hdb: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache [ 4.688413] Uniform CD-ROM driver Revision: 3.20 [ 4.807443] usb 3-2: new full speed USB device using uhci_hcd and address 3 [ 5.446132] usb 3-2: configuration #1 chosen from 1 choice [ 5.453185] usb 3-2: New USB device found, idVendor=08ff, idProduct=2580 [ 5.456923] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.460918] usb 3-2: Product: Fingerprint Sensor [ 5.687875] device-mapper: uevent: version 1.0.3 [ 5.689072] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [ 77.449099] PM: Starting manual resume from disk [ 77.216432] kjournald starting. Commit interval 5 seconds [ 77.599693] EXT3-fs: mounted filesystem with ordered data mode. [ 81.817874] input: Power Button (FF) as /class/input/input2 [ 81.876808] ACPI: Power Button (FF) [PWRF] [ 81.880947] input: Sleep Button (CM) as /class/input/input3 [ 81.934673] ACPI: Sleep Button (CM) [C2BF] [ 81.936839] input: Lid Switch as /class/input/input4 [ 81.970287] ACPI: Lid Switch [C155] [ 81.973476] ACPI: AC Adapter [C23B] (on-line) [ 82.137608] e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0 [ 82.140790] e1000e: Copyright (c) 1999-2007 Intel Corporation. [ 82.144822] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 82.148768] PCI: Setting latency timer of device 0000:00:19.0 to 64 [ 82.000153] ACPI: Battery Slot [C23D] (battery present) [ 82.365653] eth0: (PCI Express:2.5GB/s:Width x1) 00:1e:68:06:12:ee [ 82.365657] eth0: Intel(R) PRO/1000 Network Connection [ 82.365696] eth0: MAC: 4, PHY: 6, PBA No: ffffff-0ff [ 82.365775] agpgart: Detected an Intel 965GM Chipset. [ 82.001910] ACPI: WMI: Mapper loaded [ 82.403700] agpgart: Detected 7676K stolen memory. [ 82.424832] agpgart: AGP aperture is 256M @ 0xd0000000 [ 82.707289] ACPI: device:02 is registered as cooling_device9 [ 82.710253] input: Video Bus as /class/input/input5 [ 82.784809] ACPI: Video Device [C09A] (multi-head: yes rom: no post: no) [ 82.697069] Bluetooth: Core ver 2.11 [ 82.744260] NET: Registered protocol family 31 [ 82.745456] Bluetooth: HCI device and connection manager initialized [ 82.749397] Bluetooth: HCI socket layer initialized [ 83.245523] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 83.248928] iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060) [ 83.252890] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 82.887798] input: PC Speaker as /class/input/input6 [ 83.486815] Yenta: CardBus bridge found at 0000:02:06.0 [103c:30c9] [ 83.595018] ricoh-mmc: Ricoh MMC Controller disabling driver [ 83.595025] ricoh-mmc: Copyright(c) Philip Langdale [ 83.608017] Bluetooth: HCI USB driver ver 2.9 [ 83.612151] Yenta: ISA IRQ mask 0x04b8, PCI irq 18 [ 83.615053] Socket status: 30000006 [ 83.619041] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06 [ 83.239173] usbcore: registered new interface driver hci_usb [ 83.623042] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff [ 83.627028] pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe03fffff [ 83.631027] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff [ 83.635396] ricoh-mmc: Ricoh MMC controller found at 0000:02:06.3 [1180:0843] (rev 11) [ 83.639049] ricoh-mmc: Controller is now disabled. [ 83.807538] sdhci: Secure Digital Host Controller Interface driver [ 83.810237] sdhci: Copyright(c) Pierre Ossman [ 83.814275] sdhci: SDHCI controller found at 0000:02:06.2 [1180:0822] (rev 21) [ 83.818247] ACPI: PCI Interrupt 0000:02:06.2[C] -> GSI 20 (level, low) -> IRQ 20 [ 83.822258] sdhc0:slot0: Will use DMA mode even though HW doesn't fully claim to support it. [ 83.830231] mmc0: SDHCI at 0xe0102000 irq 20 DMA [ 83.561362] pnp: the driver 'tpm_inf_pnp' has been registered [ 83.561745] tpm_inf_pnp 00:02: Found C284 with ID IFX0102 [ 83.565798] tpm_inf_pnp 00:02: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) [ 83.570037] tpm_inf_pnp 00:02: driver attached [ 84.051552] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.23ks [ 84.054282] iwl4965: Copyright(c) 2003-2007 Intel Corporation [ 84.058376] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 84.062287] PCI: Setting latency timer of device 0000:10:00.0 to 64 [ 84.066299] iwl4965: Detected Intel Wireless WiFi Link 4965AGN [ 84.118656] iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels [ 84.123101] phy0: Selected rate control algorithm 'iwl-4965-rs' [ 84.339785] ACPI: PCI interrupt for device 0000:10:00.0 disabled [ 84.164081] input: PS/2 Generic Mouse as /class/input/input7 [ 84.220160] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 84.224143] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 84.805893] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 84.844060] input: SynPS/2 Synaptics TouchPad as /class/input/input8 [ 86.605978] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x006ba000 [ 87.270261] EXT3 FS on dm-1, internal journal [ 88.670658] loop: module loaded [ 88.786193] tun: Universal TUN/TAP device driver, 1.6 [ 88.786406] tun: (C) 1999-2004 Max Krasnyansky [ 91.314501] kjournald starting. Commit interval 5 seconds [ 91.317416] EXT3 FS on hda1, internal journal [ 91.321095] EXT3-fs: mounted filesystem with ordered data mode. [ 91.362657] kjournald starting. Commit interval 5 seconds [ 91.364863] EXT3 FS on dm-3, internal journal [ 91.368449] EXT3-fs: mounted filesystem with ordered data mode. [ 91.071837] Adding 1048568k swap on /dev/mapper/lucky-swap. Priority:-1 extents:1 across:1048568k [ 92.858817] Bridge firewalling registered [ 93.215772] br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 92.876596] device eth0 entered promiscuous mode [ 94.897320] eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 94.900894] eth0: 10/100 speed: disabling TSO [ 94.905430] br0: port 1(eth0) entering learning state [ 103.880556] br0: topology change detected, propagating [ 103.884547] br0: port 1(eth0) entering forwarding state [ 105.552042] NET: Registered protocol family 10 [ 105.555411] lo: Disabled Privacy Extensions [ 112.922474] pnp: the driver 'parport_pc' has been registered [ 112.664432] lp: driver loaded but no devices found [ 112.778585] ppdev: user-space parallel port driver [ 115.797086] eth0: no IPv6 routers present [ 116.287256] br0: no IPv6 routers present [ 119.053997] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 121.707099] Bluetooth: L2CAP ver 2.9 [ 121.710270] Bluetooth: L2CAP socket layer initialized [ 121.850732] Bluetooth: RFCOMM socket layer initialized [ 121.854078] Bluetooth: RFCOMM TTY layer initialized [ 121.858023] Bluetooth: RFCOMM ver 1.8 [ 122.418172] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 122.419231] PM: Writing back config space on device 0000:10:00.0 at offset 1 (was 100002, writing 100006) [ 122.417622] iwl4965: iwlwifi-4965-1.ucode firmware file req failed: Reason -2 [ 122.417898] iwl4965: Could not read microcode: -2 [ 122.425981] ACPI: PCI interrupt for device 0000:10:00.0 disabled [ 125.489416] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 125.493348] PM: Writing back config space on device 0000:10:00.0 at offset 1 (was 100002, writing 100006) [ 125.509783] iwl4965: iwlwifi-4965-1.ucode firmware file req failed: Reason -2 [ 125.513236] iwl4965: Could not read microcode: -2 [ 125.517315] ACPI: PCI interrupt for device 0000:10:00.0 disabled [ 126.367749] hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } [ 126.369671] hdb: task_no_data_intr: error=0x04 { AbortedCommand } [ 126.369671] ide: failed opcode was: 0xef [ 130.641477] [drm] Initialized drm 1.1.0 20060810 [ 130.666634] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 130.666652] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 130.666902] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 142.804354] eth0: no IPv6 routers present [ 147.382170] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 147.382286] PM: Writing back config space on device 0000:10:00.0 at offset 1 (was 100002, writing 100006) [ 147.393959] iwl4965: iwlwifi-4965-1.ucode firmware file req failed: Reason -2 [ 147.393971] iwl4965: Could not read microcode: -2