| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 2 Apr 2008 19:09:41 +0200
From: Volker Armin Hemmann <volker.armin.hemmann@...clausthal.de>
To: Tejun Heo <htejun@...il.com>
Cc: linux-kernel@...r.kernel.org, linux-ide@...r.kernel.org
Subject: Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
On Mittwoch, 2. April 2008, Tejun Heo wrote:
> Volker Armin Hemmann wrote:
> >On Mittwoch, 19. März 2008, Tejun Heo wrote:
> >> Volker Armin Hemmann wrote:
> >>> On Mittwoch, 19. März 2008, Tejun Heo wrote:
> >>>> x UDMA/133 abar m8192@...9dfc000 port 0xf9dfc200
> >>>>
> >>>>> irq 315
> >>>>> [ 38.125479] ata4: SATA max UDMA/133 abar m8192@...9dfc000 port
> >>>>> 0xf9dfc280 irq 315
> >>>>> [ 38.597035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> >>>>> [ 38.597732] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max
> >>>>> UDMA/133 [ 38.597775] ata1.00: 312581808 sectors, multi 16: LBA48
> >>>>> [ 38.598405] ata1.00: configured for UDMA/133
> >>>>> [ 39.069342] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> >>>>> [ 39.084225] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
> >>>>> [ 39.084264] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth
> >>>>> 0/32) [ 39.086268] ata2.00: configured for UDMA/133
> >>>>
> >>>> So, just to confirm. With the updated patch, you don't see any
> >>>> problem, right?
> >>>
> >>> Correct. With the updated patch I don't see problems in 'non-raid'
> >>> mode. AHCI mode still has problems without nosmi. But that is an
> >>> entirely different problem, right?
> >>
> >> Yeap, can you please post the result of "lspci -nn"?
> >
> > with AHCI+nosmi, 2.6.24.3:
> > 00:0a.0 SATA controller [0106]: nVidia Corporation MCP65 AHCI Controller
> > [10de:044d] (rev a1)
>
> Sorry about the long delay. Can you please test the attached patch in
> both ahci and non-ahci modes w/o pci=nomsi and post resulting boot logs?
patch -p1 < /home/energyman/mcp65-ahci-debug.patch
patching file drivers/ata/libata-core.c
Hunk #1 succeeded at 7136 (offset 2 lines).
patching file drivers/ata/libata-eh.c
Hunk #1 succeeded at 2083 (offset -107 lines).
patching file drivers/pci/quirks.c
Hunk #1 succeeded at 1733 with fuzz 1 (offset -122 lines).
saved config, removed linux-2.6.24.3, unpacked 2.6.24.3 from tarball, reiser4
and your patch, make oldconfig, make menuconfig, make all modules_install
install.
dmesgs are below.
>
> > I booted into systemrescuecd (which is the easiest way to get the error
> > and be able to safe the stuff) - lspci is of course identical, but
> > /proc/interrupts is not.
> >
> > 2.6.24.3:
> > cat /proc/interrupts
> > CPU0 CPU1
> > 0: 57 1 IO-APIC-edge timer
> > 1: 1 544 IO-APIC-edge i8042
> > 8: 0 1 IO-APIC-edge rtc
> > 9: 0 1 IO-APIC-fasteoi acpi
> > 12: 0 3 IO-APIC-edge i8042
> > 17: 22 21598 IO-APIC-fasteoi nvidia
> > 18: 0 0 IO-APIC-fasteoi EMU10K1
> > 19: 5 1132 IO-APIC-fasteoi eth0
> > 22: 30 21627 IO-APIC-fasteoi ehci_hcd:usb1
> > 23: 29 23078 IO-APIC-fasteoi ahci
> > NMI: 0 0 Non-maskable interrupts
> > LOC: 41299 60204 Local timer interrupts
> > RES: 14872 22506 Rescheduling interrupts
> > CAL: 1783 173 function call interrupts
> > TLB: 2668 2406 TLB shootdowns
> > TRM: 0 0 Thermal event interrupts
> > THR: 0 0 Threshold APIC interrupts
> > SPU: 0 0 Spurious interrupts
> > ERR: 0
>
> Does the 2.6.24.3 kernel have MSI turned on?
I think so:
[*] PCI support
[*] Support mmconfig PCI config space access
[ ] Support for DMA Remapping Devices (EXPERIMENTAL)
[*] PCI Express support
[*] Root Port Advanced Error Reporting support
[*] Message Signaled Interrupts (MSI and MSI-X)
[*] Enable deprecated pci_find_* API
[*] Interrupts on hypertransport devices
but to make sure,
non-raid, coldboot, pci=nomsi:
cat /proc/interrupts
CPU0 CPU1
0: 57 1 IO-APIC-edge timer
1: 2 3300 IO-APIC-edge i8042
8: 0 1 IO-APIC-edge rtc
9: 0 1 IO-APIC-fasteoi acpi
12: 0 3 IO-APIC-edge i8042
17: 17 43662 IO-APIC-fasteoi nvidia
18: 0 0 IO-APIC-fasteoi EMU10K1
19: 12 4188 IO-APIC-fasteoi eth0
22: 26 13832 IO-APIC-fasteoi ehci_hcd:usb1
23: 24 30517 IO-APIC-fasteoi ahci
NMI: 0 0 Non-maskable interrupts
LOC: 86361 120679 Local timer interrupts
RES: 25603 12907 Rescheduling interrupts
CAL: 7294 260 function call interrupts
TLB: 4641 4579 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
SPU: 0 0 Spurious interrupts
ERR: 0
non-raid, coldboot without pci=nomsi:
cat /proc/interrupts
CPU0 CPU1
0: 57 1 IO-APIC-edge timer
1: 0 208 IO-APIC-edge i8042
8: 0 1 IO-APIC-edge rtc
9: 0 1 IO-APIC-fasteoi acpi
12: 0 3 IO-APIC-edge i8042
17: 2 5029 IO-APIC-fasteoi nvidia
18: 0 0 IO-APIC-fasteoi EMU10K1
22: 2 1439 IO-APIC-fasteoi ehci_hcd:usb1
314: 4 594 PCI-MSI-edge eth0
315: 15 15953 PCI-MSI-edge ahci
NMI: 0 0 Non-maskable interrupts
LOC: 16704 18679 Local timer interrupts
RES: 5158 3043 Rescheduling interrupts
CAL: 672 86 function call interrupts
TLB: 508 572 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
SPU: 0 0 Spurious interrupts
ERR: 0
about the boots with your patch:
AHCI + nomsi:
[ 0.000000] Linux version 2.6.24.3reiser4mcp65patch (root@...rgy) (gcc
version 4.2.3 (Gentoo 4.2.3 p1.0)) #1 SMP Wed Apr 2 07:31:52 CEST 2008
[ 0.000000] Command line: pci=nomsi root=/dev/sda3 nmi_watchdog=0
console=tty6
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[ 0.000000] BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256
used
[ 0.000000] end_pfn_map = 1245184
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I OEMRSDT 12000731 MSFT
97)
[ 0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I OEMFACP 12000601 MSFT
97)
[ 0.000000] ACPI: DSDT CFFB0450, 4FFA (r1 ASR19 ASR19186 186 INTL
20051117)
[ 0.000000] ACPI: FACS CFFC0000, 0040
[ 0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I OEMAPIC 12000731 MSFT
97)
[ 0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I OEMMCFG 12000731 MSFT
97)
[ 0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I AMI_OEM 12000731 MSFT
97)
[ 0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I OEMHPET0 12000731 MSFT
97)
[ 0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I POWERNOW 1 AMD
1)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256
used
[ 0.000000] No mptable found.
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1245184
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 851888
[ 0.000000] 0: 1048576 -> 1245184
[ 0.000000] On node 0 totalpages: 1048399
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 853 pages reserved
[ 0.000000] DMA zone: 3090 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833512 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 -
00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 -
00000000000e6000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e6000 -
0000000000100000
[ 0.000000] swsusp: Registered nosave memory region: 00000000cffb0000 -
00000000cffc0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000cffc0000 -
00000000cfff0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000cfff0000 -
00000000d0000000
[ 0.000000] swsusp: Registered nosave memory region: 00000000d0000000 -
00000000fec00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 -
00000000fec01000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fec01000 -
00000000fee00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 -
00000000fef00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fef00000 -
00000000ff380000
[ 0.000000] swsusp: Registered nosave memory region: 00000000ff380000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at d4000000 (gap:
d0000000:2ec00000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 31408 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 1030522
[ 0.000000] Kernel command line: pci=nomsi root=/dev/sda3 nmi_watchdog=0
console=tty6
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] hpet clockevent registered
[ 0.000000] TSC calibrated against HPET
[ 32.744190] Marking TSC unstable due to TSCs unsynchronized
[ 32.744192] time.c: Detected 3013.888 MHz processor.
[ 32.748009] Console: colour VGA+ 80x25
[ 32.748011] console [tty6] enabled
[ 32.752634] Dentry cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 32.754864] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 32.755634] Checking aperture...
[ 32.755672] CPU 0: aperture @ 8000000 size 32 MB
[ 32.755709] Aperture too small (32 MB)
[ 32.761552] No AGP bridge found
[ 32.761588] Your BIOS doesn't leave a aperture memory hole
[ 32.761625] Please enable the IOMMU option in the BIOS setup
[ 32.761663] This costs you 64 MB of RAM
[ 32.786893] Mapping aperture over 65536 KB of RAM @ 8000000
[ 32.811013] Memory: 4049948k/4980736k available (2192k kernel code, 143428k
reserved, 681k data, 176k init)
[ 32.811081] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2,
Nodes=1
[ 32.893841] Calibrating delay using timer specific routine.. 6034.68
BogoMIPS (lpj=10053897)
[ 32.893933] Mount-cache hash table entries: 256
[ 32.894040] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 32.894080] CPU: L2 Cache: 1024K (64 bytes/line)
[ 32.894118] CPU: Physical Processor ID: 0
[ 32.894154] CPU: Processor Core ID: 0
[ 32.894207] SMP alternatives: switching to UP code
[ 32.894570] ACPI: Core revision 20070126
[ 32.929746] Using local APIC timer interrupts.
[ 32.962890] APIC timer calibration result 12557872
[ 32.962891] Detected 12.557 MHz APIC timer.
[ 32.962975] SMP alternatives: switching to SMP code
[ 32.963204] Booting processor 1/2 APIC 0x1
[ 32.973324] Initializing CPU#1
[ 33.056090] Calibrating delay using timer specific routine.. 6030.92
BogoMIPS (lpj=10046278)
[ 33.056094] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 33.056096] CPU: L2 Cache: 1024K (64 bytes/line)
[ 33.056097] CPU: Physical Processor ID: 0
[ 33.056098] CPU: Processor Core ID: 1
[ 33.056178] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[ 33.056232] Brought up 2 CPUs
[ 33.056689] net_namespace: 120 bytes
[ 33.056921] NET: Registered protocol family 16
[ 33.057033] ACPI: bus type pci registered
[ 33.057114] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[ 33.057153] PCI: Not using MMCONFIG.
[ 33.057189] PCI: Using configuration type 1
[ 33.059432] ACPI: EC: Look up EC in DSDT
[ 33.062880] ACPI: Interpreter enabled
[ 33.062917] ACPI: (supports S0 S1 S3 S4 S5)
[ 33.063087] ACPI: Using IOAPIC for interrupt routing
[ 33.063295] Error attaching device data
[ 33.063334] Error attaching device data
[ 33.063372] Error attaching device data
[ 33.063411] Error attaching device data
[ 33.068322] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 33.068857] PCI: Transparent bridge - 0000:00:08.0
[ 33.069157] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 33.069289] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 33.069386] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[ 33.069441] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 33.069496] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[ 33.069551] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 33.073491] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[ 33.073826] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
[ 33.074160] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0,
disabled.
[ 33.074520] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0,
disabled.
[ 33.074880] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0,
disabled.
[ 33.075238] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[ 33.075571] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0,
disabled.
[ 33.075931] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[ 33.076267] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[ 33.076601] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0,
disabled.
[ 33.076961] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[ 33.077294] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0,
disabled.
[ 33.077654] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0,
disabled.
[ 33.078014] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 33.078348] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0,
disabled.
[ 33.078708] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[ 33.079041] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0,
disabled.
[ 33.079439] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0,
disabled.
[ 33.079799] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0,
disabled.
[ 33.080159] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0,
disabled.
[ 33.080477] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 33.080530] pnp: PnP ACPI init
[ 33.080569] ACPI: bus type pnp registered
[ 33.083109] pnp: PnP ACPI: found 13 devices
[ 33.083146] ACPI: ACPI bus type pnp unregistered
[ 33.083268] SCSI subsystem initialized
[ 33.083325] libata version 3.00 loaded.
[ 33.083375] usbcore: registered new interface driver usbfs
[ 33.083431] usbcore: registered new interface driver hub
[ 33.083488] usbcore: registered new device driver usb
[ 33.083572] PCI: Using ACPI for IRQ routing
[ 33.083609] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[ 33.092684] PCI-DMA: Disabling AGP.
[ 33.093419] PCI-DMA: aperture base @ 8000000 size 65536 KB
[ 33.093460] PCI-DMA: using GART IOMMU.
[ 33.093500] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 33.093658] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 33.093797] hpet0: 3 32-bit timers, 25000000 Hz
[ 33.095969] Time: hpet clocksource has been installed.
[ 33.096017] Switched to high resolution mode on CPU 0
[ 33.096108] Switched to high resolution mode on CPU 1
[ 33.102701] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 33.106092] system 00:05: ioport range 0x800-0x80f has been reserved
[ 33.106132] system 00:05: ioport range 0x2000-0x207f has been reserved
[ 33.106171] system 00:05: ioport range 0x2080-0x20ff has been reserved
[ 33.106210] system 00:05: ioport range 0x2400-0x247f has been reserved
[ 33.106250] system 00:05: ioport range 0x2480-0x24ff has been reserved
[ 33.106289] system 00:05: ioport range 0x2800-0x287f has been reserved
[ 33.106328] system 00:05: ioport range 0x2880-0x28ff has been reserved
[ 33.106367] system 00:05: ioport range 0x2c00-0x2c7f has been reserved
[ 33.106407] system 00:05: ioport range 0x2c80-0x2cff has been reserved
[ 33.106446] system 00:05: iomem range 0x0-0x0 could not be reserved
[ 33.106486] system 00:05: iomem range 0xfee01000-0xfeefffff has been
reserved
[ 33.106529] system 00:07: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 33.106577] system 00:07: iomem range 0xfee00000-0xfee00fff could not be
reserved
[ 33.106627] system 00:0a: ioport range 0x290-0x29f has been reserved
[ 33.106670] system 00:0b: iomem range 0xe0000000-0xefffffff has been
reserved
[ 33.106715] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 33.106754] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[ 33.106794] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 33.106837] system 00:0c: iomem range 0x100000-0xcfffffff could not be
reserved
[ 33.106884] system 00:0c: iomem range 0xff380000-0xffffffff could not be
reserved
[ 33.107166] PCI: Bridge: 0000:00:08.0
[ 33.107203] IO window: d000-dfff
[ 33.107240] MEM window: f9f00000-f9ffffff
[ 33.107278] PREFETCH window: disabled.
[ 33.107315] PCI: Bridge: 0000:00:0b.0
[ 33.107352] IO window: c000-cfff
[ 33.107388] MEM window: f9e00000-f9efffff
[ 33.107425] PREFETCH window: disabled.
[ 33.107462] PCI: Bridge: 0000:00:0c.0
[ 33.107498] IO window: disabled.
[ 33.107534] MEM window: disabled.
[ 33.107570] PREFETCH window: disabled.
[ 33.107608] PCI: Bridge: 0000:00:0d.0
[ 33.107644] IO window: e000-efff
[ 33.107681] MEM window: fa000000-febfffff
[ 33.107717] PREFETCH window: d0000000-dfffffff
[ 33.107755] PCI: Bridge: 0000:00:0e.0
[ 33.107791] IO window: disabled.
[ 33.107827] MEM window: disabled.
[ 33.107863] PREFETCH window: disabled.
[ 33.107906] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 33.107915] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 33.107920] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 33.107925] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 33.107930] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 33.107936] NET: Registered protocol family 2
[ 33.139267] IP route cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 33.139864] TCP established hash table entries: 262144 (order: 10, 4194304
bytes)
[ 33.141290] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 33.141777] TCP: Hash tables configured (established 262144 bind 65536)
[ 33.141816] TCP reno registered
[ 33.150050] Loading Reiser4. See www.namesys.com for a description of
Reiser4.
[ 33.150154] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
254)
[ 33.150202] io scheduler noop registered
[ 33.150240] io scheduler cfq registered (default)
[ 33.150934] Boot video device is 0000:04:00.0
[ 33.151038] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 33.151056] assign_interrupt_mode Found MSI capability
[ 33.151096] Allocate Port Service[0000:00:0b.0:pcie00]
[ 33.151139] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 33.151156] assign_interrupt_mode Found MSI capability
[ 33.151194] Allocate Port Service[0000:00:0c.0:pcie00]
[ 33.151231] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 33.151248] assign_interrupt_mode Found MSI capability
[ 33.151286] Allocate Port Service[0000:00:0d.0:pcie00]
[ 33.151325] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 33.151341] assign_interrupt_mode Found MSI capability
[ 33.151379] Allocate Port Service[0000:00:0e.0:pcie00]
[ 33.151554] input: Power Button (FF) as /class/input/input0
[ 33.151592] ACPI: Power Button (FF) [PWRF]
[ 33.151677] input: Power Button (CM) as /class/input/input1
[ 33.151716] ACPI: Power Button (CM) [PWRB]
[ 33.151850] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 33.151955] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 33.175890] Real Time Clock Driver v1.12ac
[ 33.176009] hpet_resources: 0xfed00000 is busy
[ 33.176026] Linux agpgart interface v0.102
[ 33.176111] Driver 'sd' needs updating - please use bus_type methods
[ 33.176184] ahci 0000:00:0a.0: version 3.0
[ 33.176359] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 33.176403] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23
(level, low) -> IRQ 23
[ 34.179224] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf
impl SATA mode
[ 34.179276] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio
[ 34.179315] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 34.179517] scsi0 : ahci
[ 34.179613] scsi1 : ahci
[ 34.179678] scsi2 : ahci
[ 34.179744] scsi3 : ahci
[ 34.179833] ata1: SATA max UDMA/133 abar m8192@...9dfc000 port 0xf9dfc100
irq 23
[ 34.179880] ata2: SATA max UDMA/133 abar m8192@...9dfc000 port 0xf9dfc180
irq 23
[ 34.179927] ata3: SATA max UDMA/133 abar m8192@...9dfc000 port 0xf9dfc200
irq 23
[ 34.179975] ata4: SATA max UDMA/133 abar m8192@...9dfc000 port 0xf9dfc280
irq 23
[ 34.180028] ata1: hard resetting link
[ 34.808890] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 34.809485] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[ 34.809527] ata1.00: 312581808 sectors, multi 16: LBA48
[ 34.810165] ata1.00: configured for UDMA/133
[ 34.810204] ata1: EH complete
[ 34.810212] ata2: hard resetting link
[ 35.440852] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 35.461416] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[ 35.461455] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 35.463445] ata2.00: configured for UDMA/133
[ 35.463483] ata2: EH complete
[ 35.463491] ata3: hard resetting link
[ 35.780114] ata3: SATA link down (SStatus 0 SControl 300)
[ 35.780154] ata3: EH complete
[ 35.780193] ata4: hard resetting link
[ 36.099420] ata4: SATA link down (SStatus 0 SControl 300)
[ 36.099459] ata4: EH complete
[ 36.099544] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-00M 10.0
PQ: 0 ANSI: 5
[ 36.099655] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042
MB)
[ 36.099699] sd 0:0:0:0: [sda] Write Protect is off
[ 36.099737] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 36.099745] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 36.099815] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042
MB)
[ 36.099858] sd 0:0:0:0: [sda] Write Protect is off
[ 36.099896] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 36.099903] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 36.099952] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 36.125407] sd 0:0:0:0: [sda] Attached SCSI disk
[ 36.125541] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10
PQ: 0 ANSI: 5
[ 36.125650] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108
MB)
[ 36.125695] sd 1:0:0:0: [sdb] Write Protect is off
[ 36.125733] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 36.125742] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 36.125811] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108
MB)
[ 36.125855] sd 1:0:0:0: [sdb] Write Protect is off
[ 36.125892] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 36.125900] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 36.125949] sdb: sdb1 sdb2
[ 36.172294] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 36.172431] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64
irq 1,12
[ 36.175006] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 36.175046] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 36.200129] usbcore: registered new interface driver usbhid
[ 36.200168] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 36.200213] TCP cubic registered
[ 36.200252] NET: Registered protocol family 1
[ 36.200306] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor
6000+ processors (2 cpu cores) (version 2.20.00)
[ 36.200350] powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x6
[ 36.200389] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0x8
[ 36.200427] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xa
[ 36.200465] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xc
[ 36.200504] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0xe
[ 36.200542] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10
[ 36.200580] powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10
[ 36.200618] powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12
[ 36.226935] input: AT Translated Set 2 keyboard as /class/input/input2
[ 36.321226] ReiserFS: sda3: found reiserfs format "3.6" with standard
journal
[ 36.321269] ReiserFS: sda3: using ordered data mode
[ 36.330801] ReiserFS: sda3: journal params: device sda3, size 8192, journal
first block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
[ 36.331689] ReiserFS: sda3: checking transaction log (sda3)
[ 36.375107] ReiserFS: sda3: Using r5 hash to sort names
[ 36.375158] VFS: Mounted root (reiserfs filesystem) readonly.
[ 36.375208] Freeing unused kernel memory: 176k freed
[ 36.642927] Clocksource tsc unstable (delta = -121953431 ns)
[ 38.097912] ReiserFS: sda3: switching to journaled data mode
[ 38.197545] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 38.197754] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[ 38.197759] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19
(level, low) -> IRQ 19
[ 38.197768] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 38.197773] r8169 0000:01:00.0: no MSI. Back to INTx.
[ 38.197898] eth0: RTL8168b/8111b at 0xffffc20000170000, 00:19:66:47:f3:cb,
XID 38000000 IRQ 19
[ 38.212572] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 38.212578] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22
(level, low) -> IRQ 22
[ 38.212739] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 38.212742] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 38.212814] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus
number 1
[ 38.212836] ehci_hcd 0000:00:02.1: debug port 1
[ 38.212838] PCI: cache line size of 64 is not supported by device
0000:00:02.1
[ 38.212844] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00
[ 38.215380] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
[ 38.215451] usb usb1: configuration #1 chosen from 1 choice
[ 38.215466] hub 1-0:1.0: USB hub found
[ 38.215471] hub 1-0:1.0: 10 ports detected
[ 38.324831] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 38.366641] usb 1-3: configuration #1 chosen from 1 choice
[ 38.366825] hub 1-3:1.0: USB hub found
[ 38.367243] hub 1-3:1.0: 4 ports detected
[ 38.373811] reiser4: sdb2: found disk format 4.0.0.
[ 38.465745] usb 1-3.1: new low speed USB device using ehci_hcd and address
3
[ 38.495519] usb 1-3.1: configuration #1 chosen from 1 choice
[ 38.499113] input: Logitech USB Receiver as /class/input/input3
[ 38.506993] input: USB HID v1.11 Mouse [Logitech USB Receiver] on
usb-0000:00:02.1-3.1
[ 38.509283] input: Logitech USB Receiver as /class/input/input4
[ 38.524731] input: USB HID v1.11 Device [Logitech USB Receiver] on
usb-0000:00:02.1-3.1
[ 38.528863] mice: PS/2 mouse device common for all mice
[ 46.563647] reiser4: sda6: found disk format 4.0.0.
[ 47.004306] reiser4: sdb1: found disk format 4.0.0.
[ 47.362569] Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1
across:1951888k
[ 48.769822] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[ 48.769828] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18
(level, low) -> IRQ 18
[ 48.770924] Audigy2 value: Special config.
[ 50.135233] w83627ehf: Found W83627EHG chip at 0x290
[ 51.103076] r8169: eth0: link up
[ 51.103107] r8169: eth0: link up
[ 51.769942] NET: Registered protocol family 17
------------------------------------------------------------------------------------------
AHCI without nomsi:
no dmesg, because disks not found, like always. Kernel Panic at end of kernel
boot because no root-fs.
-------------------------------------------------------------------------------------------
Non-Raid, coldboot, without nomsi:
[ 0.000000] Linux version 2.6.24.3reiser4mcp65patch (root@...rgy) (gcc
version 4.2.3 (Gentoo 4.2.3 p1.0)) #1 SMP Wed Apr 2 07:31:52 CEST 2008
[ 0.000000] Command line: root=/dev/sda3 nmi_watchdog=0 console=tty6
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[ 0.000000] BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256
used
[ 0.000000] end_pfn_map = 1245184
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I OEMRSDT 12000731 MSFT
97)
[ 0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I OEMFACP 12000601 MSFT
97)
[ 0.000000] ACPI: DSDT CFFB0450, 4FFA (r1 ASR19 ASR19186 186 INTL
20051117)
[ 0.000000] ACPI: FACS CFFC0000, 0040
[ 0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I OEMAPIC 12000731 MSFT
97)
[ 0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I OEMMCFG 12000731 MSFT
97)
[ 0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I AMI_OEM 12000731 MSFT
97)
[ 0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I OEMHPET0 12000731 MSFT
97)
[ 0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I POWERNOW 1 AMD
1)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256
used
[ 0.000000] No mptable found.
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1245184
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 851888
[ 0.000000] 0: 1048576 -> 1245184
[ 0.000000] On node 0 totalpages: 1048399
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 853 pages reserved
[ 0.000000] DMA zone: 3090 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833512 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 -
00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 -
00000000000e6000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e6000 -
0000000000100000
[ 0.000000] swsusp: Registered nosave memory region: 00000000cffb0000 -
00000000cffc0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000cffc0000 -
00000000cfff0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000cfff0000 -
00000000d0000000
[ 0.000000] swsusp: Registered nosave memory region: 00000000d0000000 -
00000000fec00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 -
00000000fec01000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fec01000 -
00000000fee00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 -
00000000fef00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fef00000 -
00000000ff380000
[ 0.000000] swsusp: Registered nosave memory region: 00000000ff380000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at d4000000 (gap:
d0000000:2ec00000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 31408 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 1030522
[ 0.000000] Kernel command line: root=/dev/sda3 nmi_watchdog=0 console=tty6
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] hpet clockevent registered
[ 0.000000] TSC calibrated against HPET
[ 37.102619] Marking TSC unstable due to TSCs unsynchronized
[ 37.102621] time.c: Detected 3013.889 MHz processor.
[ 37.106452] Console: colour VGA+ 80x25
[ 37.106454] console [tty6] enabled
[ 37.111062] Dentry cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 37.113292] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 37.114061] Checking aperture...
[ 37.114099] CPU 0: aperture @ ecca000000 size 32 MB
[ 37.114137] Aperture too small (32 MB)
[ 37.120018] No AGP bridge found
[ 37.120054] Your BIOS doesn't leave a aperture memory hole
[ 37.120092] Please enable the IOMMU option in the BIOS setup
[ 37.120130] This costs you 64 MB of RAM
[ 37.145357] Mapping aperture over 65536 KB of RAM @ 8000000
[ 37.169480] Memory: 4049948k/4980736k available (2192k kernel code, 143428k
reserved, 681k data, 176k init)
[ 37.169548] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2,
Nodes=1
[ 37.252270] Calibrating delay using timer specific routine.. 6034.69
BogoMIPS (lpj=10053909)
[ 37.252362] Mount-cache hash table entries: 256
[ 37.252468] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 37.252508] CPU: L2 Cache: 1024K (64 bytes/line)
[ 37.252546] CPU: Physical Processor ID: 0
[ 37.252583] CPU: Processor Core ID: 0
[ 37.252636] SMP alternatives: switching to UP code
[ 37.252998] ACPI: Core revision 20070126
[ 37.288173] Using local APIC timer interrupts.
[ 37.321317] APIC timer calibration result 12557880
[ 37.321319] Detected 12.557 MHz APIC timer.
[ 37.321403] SMP alternatives: switching to SMP code
[ 37.321633] Booting processor 1/2 APIC 0x1
[ 37.331808] Initializing CPU#1
[ 37.414571] Calibrating delay using timer specific routine.. 6030.92
BogoMIPS (lpj=10046282)
[ 37.414576] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 37.414577] CPU: L2 Cache: 1024K (64 bytes/line)
[ 37.414579] CPU: Physical Processor ID: 0
[ 37.414580] CPU: Processor Core ID: 1
[ 37.414660] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[ 37.414661] Brought up 2 CPUs
[ 37.415120] net_namespace: 120 bytes
[ 37.415351] NET: Registered protocol family 16
[ 37.415464] ACPI: bus type pci registered
[ 37.415546] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[ 37.415585] PCI: Not using MMCONFIG.
[ 37.415622] PCI: Using configuration type 1
[ 37.417864] ACPI: EC: Look up EC in DSDT
[ 37.421312] ACPI: Interpreter enabled
[ 37.421349] ACPI: (supports S0 S1 S3 S4 S5)
[ 37.421519] ACPI: Using IOAPIC for interrupt routing
[ 37.421728] Error attaching device data
[ 37.421767] Error attaching device data
[ 37.421806] Error attaching device data
[ 37.421845] Error attaching device data
[ 37.426756] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 37.427293] PCI: Transparent bridge - 0000:00:08.0
[ 37.427592] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 37.427724] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 37.427821] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[ 37.427877] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 37.427932] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[ 37.427987] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 37.431926] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[ 37.432262] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
[ 37.432597] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0,
disabled.
[ 37.432958] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0,
disabled.
[ 37.433318] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0,
disabled.
[ 37.433678] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[ 37.434012] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0,
disabled.
[ 37.434373] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[ 37.434710] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[ 37.435044] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0,
disabled.
[ 37.435405] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[ 37.435739] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0,
disabled.
[ 37.436100] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0,
disabled.
[ 37.436460] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 37.436795] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0,
disabled.
[ 37.437156] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[ 37.437490] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0,
disabled.
[ 37.437888] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0,
disabled.
[ 37.438249] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0,
disabled.
[ 37.438611] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0,
disabled.
[ 37.438929] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 37.438983] pnp: PnP ACPI init
[ 37.439022] ACPI: bus type pnp registered
[ 37.441561] pnp: PnP ACPI: found 13 devices
[ 37.441598] ACPI: ACPI bus type pnp unregistered
[ 37.441720] SCSI subsystem initialized
[ 37.441777] libata version 3.00 loaded.
[ 37.441828] usbcore: registered new interface driver usbfs
[ 37.441884] usbcore: registered new interface driver hub
[ 37.441941] usbcore: registered new device driver usb
[ 37.442025] PCI: Using ACPI for IRQ routing
[ 37.442062] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[ 37.451111] PCI-DMA: Disabling AGP.
[ 37.451847] PCI-DMA: aperture base @ 8000000 size 65536 KB
[ 37.451888] PCI-DMA: using GART IOMMU.
[ 37.451928] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 37.452087] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 37.452226] hpet0: 3 32-bit timers, 25000000 Hz
[ 37.454396] Time: hpet clocksource has been installed.
[ 37.454445] Switched to high resolution mode on CPU 0
[ 37.454590] Switched to high resolution mode on CPU 1
[ 37.461128] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 37.461168] system 00:05: ioport range 0x800-0x80f has been reserved
[ 37.461208] system 00:05: ioport range 0x2000-0x207f has been reserved
[ 37.461247] system 00:05: ioport range 0x2080-0x20ff has been reserved
[ 37.464651] system 00:05: ioport range 0x2400-0x247f has been reserved
[ 37.464690] system 00:05: ioport range 0x2480-0x24ff has been reserved
[ 37.464729] system 00:05: ioport range 0x2800-0x287f has been reserved
[ 37.464769] system 00:05: ioport range 0x2880-0x28ff has been reserved
[ 37.464808] system 00:05: ioport range 0x2c00-0x2c7f has been reserved
[ 37.464847] system 00:05: ioport range 0x2c80-0x2cff has been reserved
[ 37.464887] system 00:05: iomem range 0x0-0x0 could not be reserved
[ 37.464927] system 00:05: iomem range 0xfee01000-0xfeefffff has been
reserved
[ 37.464970] system 00:07: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 37.465018] system 00:07: iomem range 0xfee00000-0xfee00fff could not be
reserved
[ 37.465068] system 00:0a: ioport range 0x290-0x29f has been reserved
[ 37.465111] system 00:0b: iomem range 0xe0000000-0xefffffff has been
reserved
[ 37.465156] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 37.465195] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[ 37.465239] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 37.465279] system 00:0c: iomem range 0x100000-0xcfffffff could not be
reserved
[ 37.465326] system 00:0c: iomem range 0xff380000-0xffffffff could not be
reserved
[ 37.465608] PCI: Bridge: 0000:00:08.0
[ 37.465645] IO window: d000-dfff
[ 37.465683] MEM window: f9f00000-f9ffffff
[ 37.465720] PREFETCH window: disabled.
[ 37.465758] PCI: Bridge: 0000:00:0b.0
[ 37.465794] IO window: c000-cfff
[ 37.465831] MEM window: f9e00000-f9efffff
[ 37.465867] PREFETCH window: disabled.
[ 37.465905] PCI: Bridge: 0000:00:0c.0
[ 37.465941] IO window: disabled.
[ 37.465977] MEM window: disabled.
[ 37.466013] PREFETCH window: disabled.
[ 37.466051] PCI: Bridge: 0000:00:0d.0
[ 37.466087] IO window: e000-efff
[ 37.466123] MEM window: fa000000-febfffff
[ 37.466161] PREFETCH window: d0000000-dfffffff
[ 37.466198] PCI: Bridge: 0000:00:0e.0
[ 37.466234] IO window: disabled.
[ 37.466271] MEM window: disabled.
[ 37.466307] PREFETCH window: disabled.
[ 37.466350] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 37.466359] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 37.466364] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 37.466369] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 37.466374] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 37.466379] NET: Registered protocol family 2
[ 37.497695] IP route cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 37.498291] TCP established hash table entries: 262144 (order: 10, 4194304
bytes)
[ 37.499717] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 37.500203] TCP: Hash tables configured (established 262144 bind 65536)
[ 37.500243] TCP reno registered
[ 37.508476] Loading Reiser4. See www.namesys.com for a description of
Reiser4.
[ 37.508580] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
254)
[ 37.508628] io scheduler noop registered
[ 37.508666] io scheduler cfq registered (default)
[ 37.509360] Boot video device is 0000:04:00.0
[ 37.509463] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 37.509481] assign_interrupt_mode Found MSI capability
[ 37.509536] Allocate Port Service[0000:00:0b.0:pcie00]
[ 37.509579] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 37.509596] assign_interrupt_mode Found MSI capability
[ 37.509645] Allocate Port Service[0000:00:0c.0:pcie00]
[ 37.509683] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 37.509700] assign_interrupt_mode Found MSI capability
[ 37.509748] Allocate Port Service[0000:00:0d.0:pcie00]
[ 37.509787] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 37.509804] assign_interrupt_mode Found MSI capability
[ 37.509853] Allocate Port Service[0000:00:0e.0:pcie00]
[ 37.510027] input: Power Button (FF) as /class/input/input0
[ 37.510066] ACPI: Power Button (FF) [PWRF]
[ 37.510151] input: Power Button (CM) as /class/input/input1
[ 37.510189] ACPI: Power Button (CM) [PWRB]
[ 37.510323] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 37.510428] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 37.534318] Real Time Clock Driver v1.12ac
[ 37.534436] hpet_resources: 0xfed00000 is busy
[ 37.534453] Linux agpgart interface v0.102
[ 37.534538] Driver 'sd' needs updating - please use bus_type methods
[ 37.534611] ahci 0000:00:0a.0: version 3.0
[ 37.534786] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 37.534830] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23
(level, low) -> IRQ 23
[ 38.535364] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf
impl IDE mode
[ 38.535416] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio
[ 38.535456] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 38.535658] scsi0 : ahci
[ 38.535753] scsi1 : ahci
[ 38.535819] scsi2 : ahci
[ 38.535885] scsi3 : ahci
[ 38.535973] ata1: SATA max UDMA/133 abar m8192@...9dfc000 port 0xf9dfc100
irq 315
[ 38.536021] ata2: SATA max UDMA/133 abar m8192@...9dfc000 port 0xf9dfc180
irq 315
[ 38.536068] ata3: SATA max UDMA/133 abar m8192@...9dfc000 port 0xf9dfc200
irq 315
[ 38.536116] ata4: SATA max UDMA/133 abar m8192@...9dfc000 port 0xf9dfc280
irq 315
[ 38.536170] ata1: hard resetting link
[ 39.167317] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 69.102247] ata1.00: qc timeout (cmd 0xec)
[ 69.102286] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 69.102325] ata1: failed to recover some devices, retrying in 5 secs
[ 74.094724] ata1: hard resetting link
[ 74.726687] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 74.727355] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[ 74.727397] ata1.00: 312581808 sectors, multi 16: LBA48
[ 74.728021] ata1.00: configured for UDMA/133
[ 74.728065] ata1: EH complete
[ 74.728020] ata2: hard resetting link
[ 75.358646] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 75.360694] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[ 75.360734] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 75.362725] ata2.00: configured for UDMA/133
[ 75.362763] ata2: EH complete
[ 75.362716] ata3: hard resetting link
[ 75.681278] ata3: SATA link down (SStatus 0 SControl 300)
[ 75.681318] ata3: EH complete
[ 75.681356] ata4: hard resetting link
[ 76.000584] ata4: SATA link down (SStatus 0 SControl 300)
[ 76.000622] ata4: EH complete
[ 76.000707] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-00M 10.0
PQ: 0 ANSI: 5
[ 76.000817] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042
MB)
[ 76.000861] sd 0:0:0:0: [sda] Write Protect is off
[ 76.000899] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 76.000907] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 76.000977] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042
MB)
[ 76.001020] sd 0:0:0:0: [sda] Write Protect is off
[ 76.001058] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 76.001065] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 76.001114] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 76.027136] sd 0:0:0:0: [sda] Attached SCSI disk
[ 76.027269] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10
PQ: 0 ANSI: 5
[ 76.027383] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108
MB)
[ 76.027428] sd 1:0:0:0: [sdb] Write Protect is off
[ 76.027466] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 76.027475] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 76.027544] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108
MB)
[ 76.027588] sd 1:0:0:0: [sdb] Write Protect is off
[ 76.027625] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 76.027633] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 76.027682] sdb: sdb1 sdb2
[ 76.076523] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 76.076661] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64
irq 1,12
[ 76.079553] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 76.079593] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 76.104671] usbcore: registered new interface driver usbhid
[ 76.104710] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 76.104754] TCP cubic registered
[ 76.104793] NET: Registered protocol family 1
[ 76.104847] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor
6000+ processors (2 cpu cores) (version 2.20.00)
[ 76.104838] powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x6
[ 76.104877] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0x8
[ 76.104916] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xa
[ 76.104954] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xc
[ 76.104992] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0xe
[ 76.105030] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10
[ 76.105068] powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10
[ 76.105107] powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12
[ 76.128444] input: AT Translated Set 2 keyboard as /class/input/input2
[ 76.215268] ReiserFS: sda3: found reiserfs format "3.6" with standard
journal
[ 76.215286] ReiserFS: sda3: using ordered data mode
[ 76.218449] ReiserFS: sda3: journal params: device sda3, size 8192, journal
first block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
[ 76.219179] ReiserFS: sda3: checking transaction log (sda3)
[ 76.233219] ReiserFS: sda3: Using r5 hash to sort names
[ 76.233243] VFS: Mounted root (reiserfs filesystem) readonly.
[ 76.233268] Freeing unused kernel memory: 176k freed
[ 76.320130] Clocksource tsc unstable (delta = -226409081 ns)
[ 77.843642] ReiserFS: sda3: switching to journaled data mode
[ 77.937038] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 77.937245] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[ 77.937250] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19
(level, low) -> IRQ 19
[ 77.937259] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 77.937407] eth0: RTL8168b/8111b at 0xffffc20000170000, 00:19:66:47:f3:cb,
XID 38000000 IRQ 314
[ 77.943778] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 77.943784] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22
(level, low) -> IRQ 22
[ 77.943935] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 77.943939] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 77.944013] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus
number 1
[ 77.944034] ehci_hcd 0000:00:02.1: debug port 1
[ 77.944036] PCI: cache line size of 64 is not supported by device
0000:00:02.1
[ 77.944043] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00
[ 77.946961] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
[ 77.947033] usb usb1: configuration #1 chosen from 1 choice
[ 77.947047] hub 1-0:1.0: USB hub found
[ 77.947052] hub 1-0:1.0: 10 ports detected
[ 78.056358] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 78.098216] usb 1-3: configuration #1 chosen from 1 choice
[ 78.098396] hub 1-3:1.0: USB hub found
[ 78.100884] hub 1-3:1.0: 4 ports detected
[ 78.104406] reiser4: sdb2: found disk format 4.0.0.
[ 78.197319] usb 1-3.1: new low speed USB device using ehci_hcd and address
3
[ 78.227050] usb 1-3.1: configuration #1 chosen from 1 choice
[ 78.230650] input: Logitech USB Receiver as /class/input/input3
[ 78.238571] input: USB HID v1.11 Mouse [Logitech USB Receiver] on
usb-0000:00:02.1-3.1
[ 78.240817] input: Logitech USB Receiver as /class/input/input4
[ 78.256310] input: USB HID v1.11 Device [Logitech USB Receiver] on
usb-0000:00:02.1-3.1
[ 78.260759] mice: PS/2 mouse device common for all mice
[ 86.535824] reiser4: sda6: found disk format 4.0.0.
[ 86.992785] reiser4: sdb1: found disk format 4.0.0.
[ 87.343050] Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1
across:1951888k
[ 89.330471] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[ 89.330476] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18
(level, low) -> IRQ 18
[ 89.331562] Audigy2 value: Special config.
[ 90.787221] w83627ehf: Found W83627EHG chip at 0x290
[ 91.679513] r8169: eth0: link up
[ 91.679616] r8169: eth0: link up
[ 92.349231] NET: Registered protocol family 17
--------------------------------------------------------------------------------------
Non-Raid, coldboot with nomsi:
[ 0.000000] Linux version 2.6.24.3reiser4mcp65patch (root@...rgy) (gcc
version 4.2.3 (Gentoo 4.2.3 p1.0)) #1 SMP Wed Apr 2 07:31:52 CEST 2008
[ 0.000000] Command line: pci=nomsi root=/dev/sda3 nmi_watchdog=0
console=tty6
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[ 0.000000] BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256
used
[ 0.000000] end_pfn_map = 1245184
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I OEMRSDT 12000731 MSFT
97)
[ 0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I OEMFACP 12000601 MSFT
97)
[ 0.000000] ACPI: DSDT CFFB0450, 4FFA (r1 ASR19 ASR19186 186 INTL
20051117)
[ 0.000000] ACPI: FACS CFFC0000, 0040
[ 0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I OEMAPIC 12000731 MSFT
97)
[ 0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I OEMMCFG 12000731 MSFT
97)
[ 0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I AMI_OEM 12000731 MSFT
97)
[ 0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I OEMHPET0 12000731 MSFT
97)
[ 0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I POWERNOW 1 AMD
1)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256
used
[ 0.000000] No mptable found.
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1245184
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 851888
[ 0.000000] 0: 1048576 -> 1245184
[ 0.000000] On node 0 totalpages: 1048399
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 853 pages reserved
[ 0.000000] DMA zone: 3090 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833512 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 -
00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 -
00000000000e6000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e6000 -
0000000000100000
[ 0.000000] swsusp: Registered nosave memory region: 00000000cffb0000 -
00000000cffc0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000cffc0000 -
00000000cfff0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000cfff0000 -
00000000d0000000
[ 0.000000] swsusp: Registered nosave memory region: 00000000d0000000 -
00000000fec00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 -
00000000fec01000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fec01000 -
00000000fee00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 -
00000000fef00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fef00000 -
00000000ff380000
[ 0.000000] swsusp: Registered nosave memory region: 00000000ff380000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at d4000000 (gap:
d0000000:2ec00000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 31408 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 1030522
[ 0.000000] Kernel command line: pci=nomsi root=/dev/sda3 nmi_watchdog=0
console=tty6
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] hpet clockevent registered
[ 0.000000] TSC calibrated against HPET
[ 27.759462] Marking TSC unstable due to TSCs unsynchronized
[ 27.759464] time.c: Detected 3013.887 MHz processor.
[ 27.763286] Console: colour VGA+ 80x25
[ 27.763288] console [tty6] enabled
[ 27.767917] Dentry cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 27.770146] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 27.770916] Checking aperture...
[ 27.770953] CPU 0: aperture @ ec8a000000 size 32 MB
[ 27.770991] Aperture too small (32 MB)
[ 27.776850] No AGP bridge found
[ 27.776886] Your BIOS doesn't leave a aperture memory hole
[ 27.776924] Please enable the IOMMU option in the BIOS setup
[ 27.776962] This costs you 64 MB of RAM
[ 27.802191] Mapping aperture over 65536 KB of RAM @ 8000000
[ 27.826316] Memory: 4049948k/4980736k available (2192k kernel code, 143428k
reserved, 681k data, 176k init)
[ 27.826385] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2,
Nodes=1
[ 27.909114] Calibrating delay using timer specific routine.. 6034.69
BogoMIPS (lpj=10053917)
[ 27.909206] Mount-cache hash table entries: 256
[ 27.909312] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 27.909352] CPU: L2 Cache: 1024K (64 bytes/line)
[ 27.909390] CPU: Physical Processor ID: 0
[ 27.909427] CPU: Processor Core ID: 0
[ 27.909480] SMP alternatives: switching to UP code
[ 27.909843] ACPI: Core revision 20070126
[ 27.945018] Using local APIC timer interrupts.
[ 27.978163] APIC timer calibration result 12557871
[ 27.978164] Detected 12.557 MHz APIC timer.
[ 27.978249] SMP alternatives: switching to SMP code
[ 27.978478] Booting processor 1/2 APIC 0x1
[ 27.988624] Initializing CPU#1
[ 28.071388] Calibrating delay using timer specific routine.. 6030.92
BogoMIPS (lpj=10046277)
[ 28.071392] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 28.071394] CPU: L2 Cache: 1024K (64 bytes/line)
[ 28.071395] CPU: Physical Processor ID: 0
[ 28.071396] CPU: Processor Core ID: 1
[ 28.071476] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[ 28.071506] Brought up 2 CPUs
[ 28.071965] net_namespace: 120 bytes
[ 28.072196] NET: Registered protocol family 16
[ 28.072308] ACPI: bus type pci registered
[ 28.072391] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[ 28.072430] PCI: Not using MMCONFIG.
[ 28.072466] PCI: Using configuration type 1
[ 28.074707] ACPI: EC: Look up EC in DSDT
[ 28.078159] ACPI: Interpreter enabled
[ 28.078197] ACPI: (supports S0 S1 S3 S4 S5)
[ 28.078366] ACPI: Using IOAPIC for interrupt routing
[ 28.078575] Error attaching device data
[ 28.078614] Error attaching device data
[ 28.078653] Error attaching device data
[ 28.078691] Error attaching device data
[ 28.083604] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 28.084141] PCI: Transparent bridge - 0000:00:08.0
[ 28.084440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 28.084572] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 28.084669] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[ 28.084724] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 28.084779] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[ 28.084835] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 28.088773] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[ 28.089109] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
[ 28.089443] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0,
disabled.
[ 28.089804] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0,
disabled.
[ 28.090164] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0,
disabled.
[ 28.090524] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[ 28.090857] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0,
disabled.
[ 28.091218] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[ 28.091554] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[ 28.091889] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0,
disabled.
[ 28.092249] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[ 28.092583] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0,
disabled.
[ 28.092943] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0,
disabled.
[ 28.093304] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 28.093639] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0,
disabled.
[ 28.093999] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[ 28.094334] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0,
disabled.
[ 28.094731] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0,
disabled.
[ 28.095092] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0,
disabled.
[ 28.095452] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0,
disabled.
[ 28.095770] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 28.095824] pnp: PnP ACPI init
[ 28.095863] ACPI: bus type pnp registered
[ 28.098401] pnp: PnP ACPI: found 13 devices
[ 28.098438] ACPI: ACPI bus type pnp unregistered
[ 28.098560] SCSI subsystem initialized
[ 28.098617] libata version 3.00 loaded.
[ 28.098667] usbcore: registered new interface driver usbfs
[ 28.098723] usbcore: registered new interface driver hub
[ 28.098780] usbcore: registered new device driver usb
[ 28.098864] PCI: Using ACPI for IRQ routing
[ 28.098902] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[ 28.107957] PCI-DMA: Disabling AGP.
[ 28.108693] PCI-DMA: aperture base @ 8000000 size 65536 KB
[ 28.108735] PCI-DMA: using GART IOMMU.
[ 28.108775] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 28.108934] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 28.109073] hpet0: 3 32-bit timers, 25000000 Hz
[ 28.111241] Time: hpet clocksource has been installed.
[ 28.111290] Switched to high resolution mode on CPU 0
[ 28.111406] Switched to high resolution mode on CPU 1
[ 28.117973] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 28.121365] system 00:05: ioport range 0x800-0x80f has been reserved
[ 28.121405] system 00:05: ioport range 0x2000-0x207f has been reserved
[ 28.121444] system 00:05: ioport range 0x2080-0x20ff has been reserved
[ 28.121483] system 00:05: ioport range 0x2400-0x247f has been reserved
[ 28.121523] system 00:05: ioport range 0x2480-0x24ff has been reserved
[ 28.121562] system 00:05: ioport range 0x2800-0x287f has been reserved
[ 28.121601] system 00:05: ioport range 0x2880-0x28ff has been reserved
[ 28.121641] system 00:05: ioport range 0x2c00-0x2c7f has been reserved
[ 28.121680] system 00:05: ioport range 0x2c80-0x2cff has been reserved
[ 28.121720] system 00:05: iomem range 0x0-0x0 could not be reserved
[ 28.121759] system 00:05: iomem range 0xfee01000-0xfeefffff has been
reserved
[ 28.121803] system 00:07: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 28.121850] system 00:07: iomem range 0xfee00000-0xfee00fff could not be
reserved
[ 28.121901] system 00:0a: ioport range 0x290-0x29f has been reserved
[ 28.121944] system 00:0b: iomem range 0xe0000000-0xefffffff has been
reserved
[ 28.121989] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 28.122028] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[ 28.122068] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 28.122111] system 00:0c: iomem range 0x100000-0xcfffffff could not be
reserved
[ 28.122159] system 00:0c: iomem range 0xff380000-0xffffffff could not be
reserved
[ 28.122441] PCI: Bridge: 0000:00:08.0
[ 28.122478] IO window: d000-dfff
[ 28.122515] MEM window: f9f00000-f9ffffff
[ 28.122553] PREFETCH window: disabled.
[ 28.122590] PCI: Bridge: 0000:00:0b.0
[ 28.122627] IO window: c000-cfff
[ 28.122663] MEM window: f9e00000-f9efffff
[ 28.122700] PREFETCH window: disabled.
[ 28.122737] PCI: Bridge: 0000:00:0c.0
[ 28.122773] IO window: disabled.
[ 28.122809] MEM window: disabled.
[ 28.122846] PREFETCH window: disabled.
[ 28.122883] PCI: Bridge: 0000:00:0d.0
[ 28.122919] IO window: e000-efff
[ 28.122956] MEM window: fa000000-febfffff
[ 28.122993] PREFETCH window: d0000000-dfffffff
[ 28.123031] PCI: Bridge: 0000:00:0e.0
[ 28.123067] IO window: disabled.
[ 28.123103] MEM window: disabled.
[ 28.123139] PREFETCH window: disabled.
[ 28.123182] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 28.123191] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 28.123196] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 28.123201] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 28.123206] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 28.123212] NET: Registered protocol family 2
[ 28.154540] IP route cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 28.155137] TCP established hash table entries: 262144 (order: 10, 4194304
bytes)
[ 28.156562] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 28.157048] TCP: Hash tables configured (established 262144 bind 65536)
[ 28.157088] TCP reno registered
[ 28.165321] Loading Reiser4. See www.namesys.com for a description of
Reiser4.
[ 28.165425] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
254)
[ 28.165473] io scheduler noop registered
[ 28.165511] io scheduler cfq registered (default)
[ 28.166207] Boot video device is 0000:04:00.0
[ 28.166310] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 28.166329] assign_interrupt_mode Found MSI capability
[ 28.166369] Allocate Port Service[0000:00:0b.0:pcie00]
[ 28.166412] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 28.166429] assign_interrupt_mode Found MSI capability
[ 28.166468] Allocate Port Service[0000:00:0c.0:pcie00]
[ 28.166505] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 28.166522] assign_interrupt_mode Found MSI capability
[ 28.166560] Allocate Port Service[0000:00:0d.0:pcie00]
[ 28.166599] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 28.166615] assign_interrupt_mode Found MSI capability
[ 28.166654] Allocate Port Service[0000:00:0e.0:pcie00]
[ 28.166828] input: Power Button (FF) as /class/input/input0
[ 28.166867] ACPI: Power Button (FF) [PWRF]
[ 28.166952] input: Power Button (CM) as /class/input/input1
[ 28.166990] ACPI: Power Button (CM) [PWRB]
[ 28.167124] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 28.167229] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 28.191163] Real Time Clock Driver v1.12ac
[ 28.191282] hpet_resources: 0xfed00000 is busy
[ 28.191299] Linux agpgart interface v0.102
[ 28.191384] Driver 'sd' needs updating - please use bus_type methods
[ 28.191457] ahci 0000:00:0a.0: version 3.0
[ 28.191632] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 28.191676] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23
(level, low) -> IRQ 23
[ 29.192210] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf
impl IDE mode
[ 29.192261] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio
[ 29.192301] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 29.192503] scsi0 : ahci
[ 29.192599] scsi1 : ahci
[ 29.192665] scsi2 : ahci
[ 29.192731] scsi3 : ahci
[ 29.192820] ata1: SATA max UDMA/133 abar m8192@...9dfc000 port 0xf9dfc100
irq 23
[ 29.192867] ata2: SATA max UDMA/133 abar m8192@...9dfc000 port 0xf9dfc180
irq 23
[ 29.192914] ata3: SATA max UDMA/133 abar m8192@...9dfc000 port 0xf9dfc200
irq 23
[ 29.192962] ata4: SATA max UDMA/133 abar m8192@...9dfc000 port 0xf9dfc280
irq 23
[ 29.193015] ata1: hard resetting link
[ 29.824163] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 59.759093] ata1.00: qc timeout (cmd 0xec)
[ 59.759131] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 59.759170] ata1: failed to recover some devices, retrying in 5 secs
[ 64.751570] ata1: hard resetting link
[ 65.383532] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 65.384169] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[ 65.384212] ata1.00: 312581808 sectors, multi 16: LBA48
[ 65.384862] ata1.00: configured for UDMA/133
[ 65.384905] ata1: EH complete
[ 65.384889] ata2: hard resetting link
[ 66.015492] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 66.036080] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[ 66.036120] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 66.038117] ata2.00: configured for UDMA/133
[ 66.038154] ata2: EH complete
[ 66.038136] ata3: hard resetting link
[ 66.354754] ata3: SATA link down (SStatus 0 SControl 300)
[ 66.354793] ata3: EH complete
[ 66.354832] ata4: hard resetting link
[ 66.674059] ata4: SATA link down (SStatus 0 SControl 300)
[ 66.674098] ata4: EH complete
[ 66.674183] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-00M 10.0
PQ: 0 ANSI: 5
[ 66.674293] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042
MB)
[ 66.674338] sd 0:0:0:0: [sda] Write Protect is off
[ 66.674375] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 66.674384] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 66.674453] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042
MB)
[ 66.674496] sd 0:0:0:0: [sda] Write Protect is off
[ 66.674534] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 66.674541] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 66.674590] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 66.708665] sd 0:0:0:0: [sda] Attached SCSI disk
[ 66.708799] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10
PQ: 0 ANSI: 5
[ 66.708908] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108
MB)
[ 66.708953] sd 1:0:0:0: [sdb] Write Protect is off
[ 66.708991] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 66.709000] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 66.709069] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108
MB)
[ 66.709112] sd 1:0:0:0: [sdb] Write Protect is off
[ 66.709150] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 66.709157] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 66.709206] sdb: sdb1 sdb2
[ 66.768403] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 66.768541] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64
irq 1,12
[ 66.771378] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 66.771423] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 66.798077] usbcore: registered new interface driver usbhid
[ 66.798115] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 66.798160] TCP cubic registered
[ 66.798199] NET: Registered protocol family 1
[ 66.798253] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor
6000+ processors (2 cpu cores) (version 2.20.00)
[ 66.798272] powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x6
[ 66.798312] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0x8
[ 66.798350] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xa
[ 66.798388] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xc
[ 66.798426] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0xe
[ 66.798465] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10
[ 66.798503] powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10
[ 66.798541] powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12
[ 66.823197] input: AT Translated Set 2 keyboard as /class/input/input2
[ 66.876439] ReiserFS: sda3: found reiserfs format "3.6" with standard
journal
[ 66.876457] ReiserFS: sda3: using ordered data mode
[ 66.879622] ReiserFS: sda3: journal params: device sda3, size 8192, journal
first block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
[ 66.880353] ReiserFS: sda3: checking transaction log (sda3)
[ 66.894391] ReiserFS: sda3: Using r5 hash to sort names
[ 66.894415] VFS: Mounted root (reiserfs filesystem) readonly.
[ 66.894440] Freeing unused kernel memory: 176k freed
[ 66.970322] Clocksource tsc unstable (delta = -233077876 ns)
[ 68.489857] ReiserFS: sda3: switching to journaled data mode
[ 68.592695] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 68.592900] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[ 68.592905] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19
(level, low) -> IRQ 19
[ 68.592913] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 68.592918] r8169 0000:01:00.0: no MSI. Back to INTx.
[ 68.593042] eth0: RTL8168b/8111b at 0xffffc20000170000, 00:19:66:47:f3:cb,
XID 38000000 IRQ 19
[ 68.604956] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 68.604962] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22
(level, low) -> IRQ 22
[ 68.605120] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 68.605124] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 68.605197] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus
number 1
[ 68.605218] ehci_hcd 0000:00:02.1: debug port 1
[ 68.605221] PCI: cache line size of 64 is not supported by device
0000:00:02.1
[ 68.605227] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00
[ 68.608985] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
[ 68.609055] usb usb1: configuration #1 chosen from 1 choice
[ 68.609070] hub 1-0:1.0: USB hub found
[ 68.609075] hub 1-0:1.0: 10 ports detected
[ 68.718144] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 68.759439] usb 1-3: configuration #1 chosen from 1 choice
[ 68.759615] hub 1-3:1.0: USB hub found
[ 68.762075] hub 1-3:1.0: 4 ports detected
[ 68.765724] reiser4: sdb2: found disk format 4.0.0.
[ 68.858877] usb 1-3.1: new low speed USB device using ehci_hcd and address
3
[ 68.893096] usb 1-3.1: configuration #1 chosen from 1 choice
[ 68.896822] input: Logitech USB Receiver as /class/input/input3
[ 68.902034] input: USB HID v1.11 Mouse [Logitech USB Receiver] on
usb-0000:00:02.1-3.1
[ 68.904024] input: Logitech USB Receiver as /class/input/input4
[ 68.919782] input: USB HID v1.11 Device [Logitech USB Receiver] on
usb-0000:00:02.1-3.1
[ 68.928654] mice: PS/2 mouse device common for all mice
[ 77.158319] reiser4: sda6: found disk format 4.0.0.
[ 77.610522] reiser4: sdb1: found disk format 4.0.0.
[ 77.962781] Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1
across:1951888k
[ 79.353427] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[ 79.353433] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18
(level, low) -> IRQ 18
[ 79.354520] Audigy2 value: Special config.
[ 81.058035] w83627ehf: Found W83627EHG chip at 0x290
[ 81.933779] r8169: eth0: link up
[ 81.933838] r8169: eth0: link up
[ 82.344617] NET: Registered protocol family 17
-------------------------------------------------------------------------------------
Non-Raid, reboot without nomsi:
[ 0.000000] Linux version 2.6.24.3reiser4mcp65patch (root@...rgy) (gcc
version 4.2.3 (Gentoo 4.2.3 p1.0)) #1 SMP Wed Apr 2 07:31:52 CEST 2008
[ 0.000000] Command line: root=/dev/sda3 nmi_watchdog=0 console=tty6
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[ 0.000000] BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256
used
[ 0.000000] end_pfn_map = 1245184
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I OEMRSDT 12000731 MSFT
97)
[ 0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I OEMFACP 12000601 MSFT
97)
[ 0.000000] ACPI: DSDT CFFB0450, 4FFA (r1 ASR19 ASR19186 186 INTL
20051117)
[ 0.000000] ACPI: FACS CFFC0000, 0040
[ 0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I OEMAPIC 12000731 MSFT
97)
[ 0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I OEMMCFG 12000731 MSFT
97)
[ 0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I AMI_OEM 12000731 MSFT
97)
[ 0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I OEMHPET0 12000731 MSFT
97)
[ 0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I POWERNOW 1 AMD
1)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256
used
[ 0.000000] No mptable found.
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1245184
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 851888
[ 0.000000] 0: 1048576 -> 1245184
[ 0.000000] On node 0 totalpages: 1048399
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 853 pages reserved
[ 0.000000] DMA zone: 3090 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833512 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 -
00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 -
00000000000e6000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e6000 -
0000000000100000
[ 0.000000] swsusp: Registered nosave memory region: 00000000cffb0000 -
00000000cffc0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000cffc0000 -
00000000cfff0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000cfff0000 -
00000000d0000000
[ 0.000000] swsusp: Registered nosave memory region: 00000000d0000000 -
00000000fec00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 -
00000000fec01000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fec01000 -
00000000fee00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 -
00000000fef00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fef00000 -
00000000ff380000
[ 0.000000] swsusp: Registered nosave memory region: 00000000ff380000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at d4000000 (gap:
d0000000:2ec00000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 31408 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 1030522
[ 0.000000] Kernel command line: root=/dev/sda3 nmi_watchdog=0 console=tty6
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] hpet clockevent registered
[ 0.000000] TSC calibrated against HPET
[ 35.568901] Marking TSC unstable due to TSCs unsynchronized
[ 35.568903] time.c: Detected 3013.888 MHz processor.
[ 35.572728] Console: colour VGA+ 80x25
[ 35.572730] console [tty6] enabled
[ 35.577335] Dentry cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 35.579563] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 35.580333] Checking aperture...
[ 35.580371] CPU 0: aperture @ 8000000 size 32 MB
[ 35.580408] Aperture too small (32 MB)
[ 35.586252] No AGP bridge found
[ 35.586288] Your BIOS doesn't leave a aperture memory hole
[ 35.586326] Please enable the IOMMU option in the BIOS setup
[ 35.586363] This costs you 64 MB of RAM
[ 35.611594] Mapping aperture over 65536 KB of RAM @ 8000000
[ 35.635717] Memory: 4049948k/4980736k available (2192k kernel code, 143428k
reserved, 681k data, 176k init)
[ 35.635785] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2,
Nodes=1
[ 35.718550] Calibrating delay using timer specific routine.. 6034.68
BogoMIPS (lpj=10053895)
[ 35.718643] Mount-cache hash table entries: 256
[ 35.718750] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 35.718789] CPU: L2 Cache: 1024K (64 bytes/line)
[ 35.718827] CPU: Physical Processor ID: 0
[ 35.718863] CPU: Processor Core ID: 0
[ 35.718916] SMP alternatives: switching to UP code
[ 35.719279] ACPI: Core revision 20070126
[ 35.754456] Using local APIC timer interrupts.
[ 35.787600] APIC timer calibration result 12557871
[ 35.787601] Detected 12.557 MHz APIC timer.
[ 35.787685] SMP alternatives: switching to SMP code
[ 35.787915] Booting processor 1/2 APIC 0x1
[ 35.798074] Initializing CPU#1
[ 35.880838] Calibrating delay using timer specific routine.. 6030.92
BogoMIPS (lpj=10046281)
[ 35.880842] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 35.880844] CPU: L2 Cache: 1024K (64 bytes/line)
[ 35.880846] CPU: Physical Processor ID: 0
[ 35.880846] CPU: Processor Core ID: 1
[ 35.880928] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[ 35.880942] Brought up 2 CPUs
[ 35.881401] net_namespace: 120 bytes
[ 35.881631] NET: Registered protocol family 16
[ 35.881744] ACPI: bus type pci registered
[ 35.881826] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[ 35.881865] PCI: Not using MMCONFIG.
[ 35.881901] PCI: Using configuration type 1
[ 35.884144] ACPI: EC: Look up EC in DSDT
[ 35.887592] ACPI: Interpreter enabled
[ 35.887630] ACPI: (supports S0 S1 S3 S4 S5)
[ 35.887799] ACPI: Using IOAPIC for interrupt routing
[ 35.888007] Error attaching device data
[ 35.888047] Error attaching device data
[ 35.888085] Error attaching device data
[ 35.888124] Error attaching device data
[ 35.893036] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 35.893571] PCI: Transparent bridge - 0000:00:08.0
[ 35.893871] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 35.894003] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 35.894100] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[ 35.894155] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 35.894210] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[ 35.894266] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 35.898204] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[ 35.898541] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
[ 35.898875] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0,
disabled.
[ 35.899235] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0,
disabled.
[ 35.899595] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0,
disabled.
[ 35.899955] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[ 35.900288] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0,
disabled.
[ 35.900648] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[ 35.900985] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[ 35.901319] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0,
disabled.
[ 35.901679] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[ 35.902013] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0,
disabled.
[ 35.902373] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0,
disabled.
[ 35.902734] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 35.903068] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0,
disabled.
[ 35.903429] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[ 35.903763] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0,
disabled.
[ 35.904160] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0,
disabled.
[ 35.904521] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0,
disabled.
[ 35.904882] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0,
disabled.
[ 35.905200] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 35.905254] pnp: PnP ACPI init
[ 35.905293] ACPI: bus type pnp registered
[ 35.907831] pnp: PnP ACPI: found 13 devices
[ 35.907869] ACPI: ACPI bus type pnp unregistered
[ 35.907990] SCSI subsystem initialized
[ 35.908047] libata version 3.00 loaded.
[ 35.908098] usbcore: registered new interface driver usbfs
[ 35.908153] usbcore: registered new interface driver hub
[ 35.908210] usbcore: registered new device driver usb
[ 35.908294] PCI: Using ACPI for IRQ routing
[ 35.908332] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[ 35.917394] PCI-DMA: Disabling AGP.
[ 35.918130] PCI-DMA: aperture base @ 8000000 size 65536 KB
[ 35.918172] PCI-DMA: using GART IOMMU.
[ 35.918211] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 35.918370] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 35.918509] hpet0: 3 32-bit timers, 25000000 Hz
[ 35.920679] Time: hpet clocksource has been installed.
[ 35.920727] Switched to high resolution mode on CPU 0
[ 35.920857] Switched to high resolution mode on CPU 1
[ 35.927411] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 35.927451] system 00:05: ioport range 0x800-0x80f has been reserved
[ 35.927490] system 00:05: ioport range 0x2000-0x207f has been reserved
[ 35.927530] system 00:05: ioport range 0x2080-0x20ff has been reserved
[ 35.930927] system 00:05: ioport range 0x2400-0x247f has been reserved
[ 35.930967] system 00:05: ioport range 0x2480-0x24ff has been reserved
[ 35.931006] system 00:05: ioport range 0x2800-0x287f has been reserved
[ 35.931045] system 00:05: ioport range 0x2880-0x28ff has been reserved
[ 35.931084] system 00:05: ioport range 0x2c00-0x2c7f has been reserved
[ 35.931124] system 00:05: ioport range 0x2c80-0x2cff has been reserved
[ 35.931163] system 00:05: iomem range 0x0-0x0 could not be reserved
[ 35.931203] system 00:05: iomem range 0xfee01000-0xfeefffff has been
reserved
[ 35.931247] system 00:07: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 35.931294] system 00:07: iomem range 0xfee00000-0xfee00fff could not be
reserved
[ 35.931345] system 00:0a: ioport range 0x290-0x29f has been reserved
[ 35.931387] system 00:0b: iomem range 0xe0000000-0xefffffff has been
reserved
[ 35.931433] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 35.931472] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[ 35.931514] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 35.931554] system 00:0c: iomem range 0x100000-0xcfffffff could not be
reserved
[ 35.931601] system 00:0c: iomem range 0xff380000-0xffffffff could not be
reserved
[ 35.931883] PCI: Bridge: 0000:00:08.0
[ 35.931920] IO window: d000-dfff
[ 35.931958] MEM window: f9f00000-f9ffffff
[ 35.931995] PREFETCH window: disabled.
[ 35.932033] PCI: Bridge: 0000:00:0b.0
[ 35.932069] IO window: c000-cfff
[ 35.932105] MEM window: f9e00000-f9efffff
[ 35.932142] PREFETCH window: disabled.
[ 35.932179] PCI: Bridge: 0000:00:0c.0
[ 35.932215] IO window: disabled.
[ 35.932252] MEM window: disabled.
[ 35.932288] PREFETCH window: disabled.
[ 35.932325] PCI: Bridge: 0000:00:0d.0
[ 35.932361] IO window: e000-efff
[ 35.932398] MEM window: fa000000-febfffff
[ 35.932435] PREFETCH window: d0000000-dfffffff
[ 35.932472] PCI: Bridge: 0000:00:0e.0
[ 35.932508] IO window: disabled.
[ 35.932545] MEM window: disabled.
[ 35.932581] PREFETCH window: disabled.
[ 35.932624] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 35.932632] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 35.932638] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 35.932643] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 35.932648] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 35.932653] NET: Registered protocol family 2
[ 35.963977] IP route cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 35.964574] TCP established hash table entries: 262144 (order: 10, 4194304
bytes)
[ 35.965998] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 35.966485] TCP: Hash tables configured (established 262144 bind 65536)
[ 35.966524] TCP reno registered
[ 35.974759] Loading Reiser4. See www.namesys.com for a description of
Reiser4.
[ 35.974862] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
254)
[ 35.974910] io scheduler noop registered
[ 35.974948] io scheduler cfq registered (default)
[ 35.975645] Boot video device is 0000:04:00.0
[ 35.975747] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 35.975765] assign_interrupt_mode Found MSI capability
[ 35.975819] Allocate Port Service[0000:00:0b.0:pcie00]
[ 35.975862] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 35.975879] assign_interrupt_mode Found MSI capability
[ 35.975927] Allocate Port Service[0000:00:0c.0:pcie00]
[ 35.975965] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 35.975982] assign_interrupt_mode Found MSI capability
[ 35.976030] Allocate Port Service[0000:00:0d.0:pcie00]
[ 35.976069] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 35.976085] assign_interrupt_mode Found MSI capability
[ 35.976134] Allocate Port Service[0000:00:0e.0:pcie00]
[ 35.976308] input: Power Button (FF) as /class/input/input0
[ 35.976346] ACPI: Power Button (FF) [PWRF]
[ 35.976431] input: Power Button (CM) as /class/input/input1
[ 35.976470] ACPI: Power Button (CM) [PWRB]
[ 35.976604] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 35.976708] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 36.000600] Real Time Clock Driver v1.12ac
[ 36.000718] hpet_resources: 0xfed00000 is busy
[ 36.000735] Linux agpgart interface v0.102
[ 36.000821] Driver 'sd' needs updating - please use bus_type methods
[ 36.000894] ahci 0000:00:0a.0: version 3.0
[ 36.001069] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 36.001112] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23
(level, low) -> IRQ 23
[ 37.001647] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf
impl IDE mode
[ 37.001698] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio
[ 37.001738] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 37.001939] scsi0 : ahci
[ 37.002035] scsi1 : ahci
[ 37.002101] scsi2 : ahci
[ 37.002167] scsi3 : ahci
[ 37.002256] ata1: SATA max UDMA/133 abar m8192@...9dfc000 port 0xf9dfc100
irq 315
[ 37.002303] ata2: SATA max UDMA/133 abar m8192@...9dfc000 port 0xf9dfc180
irq 315
[ 37.002351] ata3: SATA max UDMA/133 abar m8192@...9dfc000 port 0xf9dfc200
irq 315
[ 37.002398] ata4: SATA max UDMA/133 abar m8192@...9dfc000 port 0xf9dfc280
irq 315
[ 37.002451] ata1: hard resetting link
[ 42.636064] ata1: port is slow to respond, please be patient (Status 0xd0)
[ 46.999912] ata1: softreset failed (device not ready)
[ 46.999950] ata1: hard resetting link
[ 47.631874] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 47.632532] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[ 47.632575] ata1.00: 312581808 sectors, multi 16: LBA48
[ 47.633195] ata1.00: configured for UDMA/133
[ 47.633234] ata1: EH complete
[ 47.633204] ata2: hard resetting link
[ 48.263834] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 48.284435] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[ 48.284475] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 48.286461] ata2.00: configured for UDMA/133
[ 48.286498] ata2: EH complete
[ 48.286467] ata3: hard resetting link
[ 48.603096] ata3: SATA link down (SStatus 0 SControl 300)
[ 48.603136] ata3: EH complete
[ 48.603174] ata4: hard resetting link
[ 48.922402] ata4: SATA link down (SStatus 0 SControl 300)
[ 48.922441] ata4: EH complete
[ 48.922526] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-00M 10.0
PQ: 0 ANSI: 5
[ 48.922636] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042
MB)
[ 48.922681] sd 0:0:0:0: [sda] Write Protect is off
[ 48.922718] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 48.922727] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 48.922797] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042
MB)
[ 48.922840] sd 0:0:0:0: [sda] Write Protect is off
[ 48.922877] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 48.922884] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 48.922934] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 48.947679] sd 0:0:0:0: [sda] Attached SCSI disk
[ 48.947814] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10
PQ: 0 ANSI: 5
[ 48.947923] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108
MB)
[ 48.947968] sd 1:0:0:0: [sdb] Write Protect is off
[ 48.948005] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 48.948014] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 48.948084] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108
MB)
[ 48.948127] sd 1:0:0:0: [sdb] Write Protect is off
[ 48.948165] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 48.948172] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 48.948221] sdb: sdb1 sdb2
[ 48.955675] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 48.955824] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64
irq 1,12
[ 48.958615] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 48.958655] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 48.989889] usbcore: registered new interface driver usbhid
[ 48.989928] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 48.989972] TCP cubic registered
[ 48.990011] NET: Registered protocol family 1
[ 48.990065] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor
6000+ processors (2 cpu cores) (version 2.20.00)
[ 48.990071] powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x6
[ 48.990110] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0x8
[ 48.990149] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xa
[ 48.990187] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xc
[ 48.990225] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0xe
[ 48.990263] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10
[ 48.990301] powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10
[ 48.990339] powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12
[ 49.016392] input: AT Translated Set 2 keyboard as /class/input/input2
[ 49.110257] ReiserFS: sda3: found reiserfs format "3.6" with standard
journal
[ 49.110300] ReiserFS: sda3: using ordered data mode
[ 49.119834] ReiserFS: sda3: journal params: device sda3, size 8192, journal
first block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
[ 49.120720] ReiserFS: sda3: checking transaction log (sda3)
[ 49.164140] ReiserFS: sda3: Using r5 hash to sort names
[ 49.164190] VFS: Mounted root (reiserfs filesystem) readonly.
[ 49.164240] Freeing unused kernel memory: 176k freed
[ 49.991435] Clocksource tsc unstable (delta = -75286349 ns)
[ 51.294824] ReiserFS: sda3: switching to journaled data mode
[ 51.391705] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 51.391911] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[ 51.391916] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19
(level, low) -> IRQ 19
[ 51.391925] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 51.392071] eth0: RTL8168b/8111b at 0xffffc20000170000, 00:19:66:47:f3:cb,
XID 38000000 IRQ 314
[ 51.398432] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 51.398438] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22
(level, low) -> IRQ 22
[ 51.398587] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 51.398590] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 51.398660] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus
number 1
[ 51.398681] ehci_hcd 0000:00:02.1: debug port 1
[ 51.398683] PCI: cache line size of 64 is not supported by device
0000:00:02.1
[ 51.398690] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00
[ 51.400946] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
[ 51.401020] usb usb1: configuration #1 chosen from 1 choice
[ 51.401035] hub 1-0:1.0: USB hub found
[ 51.401041] hub 1-0:1.0: 10 ports detected
[ 51.511466] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 51.553322] usb 1-3: configuration #1 chosen from 1 choice
[ 51.553781] hub 1-3:1.0: USB hub found
[ 51.553892] hub 1-3:1.0: 4 ports detected
[ 51.553958] reiser4: sdb2: found disk format 4.0.0.
[ 51.650220] usb 1-3.1: new low speed USB device using ehci_hcd and address
3
[ 51.680243] usb 1-3.1: configuration #1 chosen from 1 choice
[ 51.683964] input: Logitech USB Receiver as /class/input/input3
[ 51.689218] input: USB HID v1.11 Mouse [Logitech USB Receiver] on
usb-0000:00:02.1-3.1
[ 51.691381] input: Logitech USB Receiver as /class/input/input4
[ 51.706973] input: USB HID v1.11 Device [Logitech USB Receiver] on
usb-0000:00:02.1-3.1
[ 51.715844] mice: PS/2 mouse device common for all mice
[ 59.998812] reiser4: sda6: found disk format 4.0.0.
[ 60.447503] reiser4: sdb1: found disk format 4.0.0.
[ 60.800499] Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1
across:1951888k
[ 62.060963] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[ 62.060969] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18
(level, low) -> IRQ 18
[ 62.062060] Audigy2 value: Special config.
[ 63.523122] w83627ehf: Found W83627EHG chip at 0x290
[ 64.564529] r8169: eth0: link up
[ 64.564610] r8169: eth0: link up
[ 65.034897] NET: Registered protocol family 17
--------------------------------------------------------------------------------------
Non-Raid, reboot with nomsi:
[ 0.000000] Linux version 2.6.24.3reiser4mcp65patch (root@...rgy) (gcc
version 4.2.3 (Gentoo 4.2.3 p1.0)) #1 SMP Wed Apr 2 07:31:52 CEST 2008
[ 0.000000] Command line: pci=nomsi root=/dev/sda3 nmi_watchdog=0
console=tty6
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[ 0.000000] BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256
used
[ 0.000000] end_pfn_map = 1245184
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I OEMRSDT 12000731 MSFT
97)
[ 0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I OEMFACP 12000601 MSFT
97)
[ 0.000000] ACPI: DSDT CFFB0450, 4FFA (r1 ASR19 ASR19186 186 INTL
20051117)
[ 0.000000] ACPI: FACS CFFC0000, 0040
[ 0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I OEMAPIC 12000731 MSFT
97)
[ 0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I OEMMCFG 12000731 MSFT
97)
[ 0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I AMI_OEM 12000731 MSFT
97)
[ 0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I OEMHPET0 12000731 MSFT
97)
[ 0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I POWERNOW 1 AMD
1)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256
used
[ 0.000000] No mptable found.
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1245184
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 851888
[ 0.000000] 0: 1048576 -> 1245184
[ 0.000000] On node 0 totalpages: 1048399
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 853 pages reserved
[ 0.000000] DMA zone: 3090 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833512 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 -
00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 -
00000000000e6000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e6000 -
0000000000100000
[ 0.000000] swsusp: Registered nosave memory region: 00000000cffb0000 -
00000000cffc0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000cffc0000 -
00000000cfff0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000cfff0000 -
00000000d0000000
[ 0.000000] swsusp: Registered nosave memory region: 00000000d0000000 -
00000000fec00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 -
00000000fec01000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fec01000 -
00000000fee00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 -
00000000fef00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fef00000 -
00000000ff380000
[ 0.000000] swsusp: Registered nosave memory region: 00000000ff380000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at d4000000 (gap:
d0000000:2ec00000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 31408 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 1030522
[ 0.000000] Kernel command line: pci=nomsi root=/dev/sda3 nmi_watchdog=0
console=tty6
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] hpet clockevent registered
[ 0.000000] TSC calibrated against HPET
[ 30.333692] Marking TSC unstable due to TSCs unsynchronized
[ 30.333693] time.c: Detected 3013.886 MHz processor.
[ 30.337517] Console: colour VGA+ 80x25
[ 30.337519] console [tty6] enabled
[ 30.342147] Dentry cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 30.344375] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 30.345145] Checking aperture...
[ 30.345183] CPU 0: aperture @ 8000000 size 32 MB
[ 30.345220] Aperture too small (32 MB)
[ 30.351101] No AGP bridge found
[ 30.351137] Your BIOS doesn't leave a aperture memory hole
[ 30.351175] Please enable the IOMMU option in the BIOS setup
[ 30.351213] This costs you 64 MB of RAM
[ 30.376449] Mapping aperture over 65536 KB of RAM @ 8000000
[ 30.400565] Memory: 4049948k/4980736k available (2192k kernel code, 143428k
reserved, 681k data, 176k init)
[ 30.400634] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2,
Nodes=1
[ 30.483342] Calibrating delay using timer specific routine.. 6034.68
BogoMIPS (lpj=10053900)
[ 30.483434] Mount-cache hash table entries: 256
[ 30.483541] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 30.483581] CPU: L2 Cache: 1024K (64 bytes/line)
[ 30.483619] CPU: Physical Processor ID: 0
[ 30.483655] CPU: Processor Core ID: 0
[ 30.483708] SMP alternatives: switching to UP code
[ 30.484071] ACPI: Core revision 20070126
[ 30.519247] Using local APIC timer interrupts.
[ 30.552391] APIC timer calibration result 12557863
[ 30.552393] Detected 12.557 MHz APIC timer.
[ 30.552477] SMP alternatives: switching to SMP code
[ 30.552707] Booting processor 1/2 APIC 0x1
[ 30.562854] Initializing CPU#1
[ 30.645618] Calibrating delay using timer specific routine.. 6030.92
BogoMIPS (lpj=10046281)
[ 30.645622] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 30.645624] CPU: L2 Cache: 1024K (64 bytes/line)
[ 30.645625] CPU: Physical Processor ID: 0
[ 30.645626] CPU: Processor Core ID: 1
[ 30.645707] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[ 30.645734] Brought up 2 CPUs
[ 30.646193] net_namespace: 120 bytes
[ 30.646424] NET: Registered protocol family 16
[ 30.646536] ACPI: bus type pci registered
[ 30.646618] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[ 30.646657] PCI: Not using MMCONFIG.
[ 30.646693] PCI: Using configuration type 1
[ 30.648936] ACPI: EC: Look up EC in DSDT
[ 30.652388] ACPI: Interpreter enabled
[ 30.652425] ACPI: (supports S0 S1 S3 S4 S5)
[ 30.652595] ACPI: Using IOAPIC for interrupt routing
[ 30.652803] Error attaching device data
[ 30.652842] Error attaching device data
[ 30.652881] Error attaching device data
[ 30.652920] Error attaching device data
[ 30.657832] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 30.658369] PCI: Transparent bridge - 0000:00:08.0
[ 30.658669] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 30.658801] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 30.658898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[ 30.658954] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 30.659009] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[ 30.659064] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 30.663003] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[ 30.663339] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
[ 30.663674] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0,
disabled.
[ 30.664034] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0,
disabled.
[ 30.664394] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0,
disabled.
[ 30.664754] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[ 30.665088] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0,
disabled.
[ 30.665448] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[ 30.665785] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[ 30.666120] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0,
disabled.
[ 30.666480] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[ 30.666814] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0,
disabled.
[ 30.667174] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0,
disabled.
[ 30.667535] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 30.667869] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0,
disabled.
[ 30.668230] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[ 30.668564] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0,
disabled.
[ 30.668962] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0,
disabled.
[ 30.669322] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0,
disabled.
[ 30.669683] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0,
disabled.
[ 30.670002] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 30.670055] pnp: PnP ACPI init
[ 30.670095] ACPI: bus type pnp registered
[ 30.672633] pnp: PnP ACPI: found 13 devices
[ 30.672670] ACPI: ACPI bus type pnp unregistered
[ 30.672792] SCSI subsystem initialized
[ 30.672849] libata version 3.00 loaded.
[ 30.672899] usbcore: registered new interface driver usbfs
[ 30.672955] usbcore: registered new interface driver hub
[ 30.673012] usbcore: registered new device driver usb
[ 30.673096] PCI: Using ACPI for IRQ routing
[ 30.673134] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[ 30.682185] PCI-DMA: Disabling AGP.
[ 30.682921] PCI-DMA: aperture base @ 8000000 size 65536 KB
[ 30.682963] PCI-DMA: using GART IOMMU.
[ 30.683002] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 30.683161] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 30.683301] hpet0: 3 32-bit timers, 25000000 Hz
[ 30.685470] Time: hpet clocksource has been installed.
[ 30.685519] Switched to high resolution mode on CPU 0
[ 30.685636] Switched to high resolution mode on CPU 1
[ 30.692202] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 30.695597] system 00:05: ioport range 0x800-0x80f has been reserved
[ 30.695637] system 00:05: ioport range 0x2000-0x207f has been reserved
[ 30.695676] system 00:05: ioport range 0x2080-0x20ff has been reserved
[ 30.695715] system 00:05: ioport range 0x2400-0x247f has been reserved
[ 30.695755] system 00:05: ioport range 0x2480-0x24ff has been reserved
[ 30.695794] system 00:05: ioport range 0x2800-0x287f has been reserved
[ 30.695833] system 00:05: ioport range 0x2880-0x28ff has been reserved
[ 30.695873] system 00:05: ioport range 0x2c00-0x2c7f has been reserved
[ 30.695912] system 00:05: ioport range 0x2c80-0x2cff has been reserved
[ 30.695952] system 00:05: iomem range 0x0-0x0 could not be reserved
[ 30.695991] system 00:05: iomem range 0xfee01000-0xfeefffff has been
reserved
[ 30.696035] system 00:07: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 30.696082] system 00:07: iomem range 0xfee00000-0xfee00fff could not be
reserved
[ 30.696133] system 00:0a: ioport range 0x290-0x29f has been reserved
[ 30.696176] system 00:0b: iomem range 0xe0000000-0xefffffff has been
reserved
[ 30.696221] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 30.696260] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[ 30.696300] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 30.696342] system 00:0c: iomem range 0x100000-0xcfffffff could not be
reserved
[ 30.696389] system 00:0c: iomem range 0xff380000-0xffffffff could not be
reserved
[ 30.696671] PCI: Bridge: 0000:00:08.0
[ 30.696708] IO window: d000-dfff
[ 30.696746] MEM window: f9f00000-f9ffffff
[ 30.696783] PREFETCH window: disabled.
[ 30.696821] PCI: Bridge: 0000:00:0b.0
[ 30.696857] IO window: c000-cfff
[ 30.696894] MEM window: f9e00000-f9efffff
[ 30.696930] PREFETCH window: disabled.
[ 30.696967] PCI: Bridge: 0000:00:0c.0
[ 30.697003] IO window: disabled.
[ 30.697040] MEM window: disabled.
[ 30.697076] PREFETCH window: disabled.
[ 30.697113] PCI: Bridge: 0000:00:0d.0
[ 30.697150] IO window: e000-efff
[ 30.697186] MEM window: fa000000-febfffff
[ 30.697223] PREFETCH window: d0000000-dfffffff
[ 30.697261] PCI: Bridge: 0000:00:0e.0
[ 30.697297] IO window: disabled.
[ 30.697333] MEM window: disabled.
[ 30.697370] PREFETCH window: disabled.
[ 30.697413] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 30.697421] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 30.697426] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 30.697431] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 30.697436] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 30.697442] NET: Registered protocol family 2
[ 30.728769] IP route cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 30.729365] TCP established hash table entries: 262144 (order: 10, 4194304
bytes)
[ 30.730789] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 30.731276] TCP: Hash tables configured (established 262144 bind 65536)
[ 30.731316] TCP reno registered
[ 30.739550] Loading Reiser4. See www.namesys.com for a description of
Reiser4.
[ 30.739654] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
254)
[ 30.739702] io scheduler noop registered
[ 30.739740] io scheduler cfq registered (default)
[ 30.740435] Boot video device is 0000:04:00.0
[ 30.740539] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 30.740557] assign_interrupt_mode Found MSI capability
[ 30.740598] Allocate Port Service[0000:00:0b.0:pcie00]
[ 30.740641] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 30.740658] assign_interrupt_mode Found MSI capability
[ 30.740696] Allocate Port Service[0000:00:0c.0:pcie00]
[ 30.740734] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 30.740750] assign_interrupt_mode Found MSI capability
[ 30.740789] Allocate Port Service[0000:00:0d.0:pcie00]
[ 30.740828] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 30.740844] assign_interrupt_mode Found MSI capability
[ 30.740883] Allocate Port Service[0000:00:0e.0:pcie00]
[ 30.741057] input: Power Button (FF) as /class/input/input0
[ 30.741096] ACPI: Power Button (FF) [PWRF]
[ 30.741181] input: Power Button (CM) as /class/input/input1
[ 30.741219] ACPI: Power Button (CM) [PWRB]
[ 30.741353] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 30.741458] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 30.765391] Real Time Clock Driver v1.12ac
[ 30.765510] hpet_resources: 0xfed00000 is busy
[ 30.765527] Linux agpgart interface v0.102
[ 30.765612] Driver 'sd' needs updating - please use bus_type methods
[ 30.765685] ahci 0000:00:0a.0: version 3.0
[ 30.765860] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 30.765904] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23
(level, low) -> IRQ 23
[ 31.766438] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf
impl IDE mode
[ 31.766489] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio
[ 31.766529] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 31.766731] scsi0 : ahci
[ 31.766827] scsi1 : ahci
[ 31.766893] scsi2 : ahci
[ 31.766959] scsi3 : ahci
[ 31.767048] ata1: SATA max UDMA/133 abar m8192@...9dfc000 port 0xf9dfc100
irq 23
[ 31.767095] ata2: SATA max UDMA/133 abar m8192@...9dfc000 port 0xf9dfc180
irq 23
[ 31.767143] ata3: SATA max UDMA/133 abar m8192@...9dfc000 port 0xf9dfc200
irq 23
[ 31.767190] ata4: SATA max UDMA/133 abar m8192@...9dfc000 port 0xf9dfc280
irq 23
[ 31.767244] ata1: hard resetting link
[ 37.400855] ata1: port is slow to respond, please be patient (Status 0xd0)
[ 41.764704] ata1: softreset failed (device not ready)
[ 41.764742] ata1: hard resetting link
[ 42.396665] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 42.397323] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[ 42.397366] ata1.00: 312581808 sectors, multi 16: LBA48
[ 42.398017] ata1.00: configured for UDMA/133
[ 42.398055] ata1: EH complete
[ 42.398038] ata2: hard resetting link
[ 43.028625] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 43.030633] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[ 43.030672] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 43.032670] ata2.00: configured for UDMA/133
[ 43.032708] ata2: EH complete
[ 43.032689] ata3: hard resetting link
[ 43.351257] ata3: SATA link down (SStatus 0 SControl 300)
[ 43.351297] ata3: EH complete
[ 43.351335] ata4: hard resetting link
[ 43.670563] ata4: SATA link down (SStatus 0 SControl 300)
[ 43.670602] ata4: EH complete
[ 43.670687] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-00M 10.0
PQ: 0 ANSI: 5
[ 43.670797] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042
MB)
[ 43.670841] sd 0:0:0:0: [sda] Write Protect is off
[ 43.670879] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 43.670887] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 43.670957] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042
MB)
[ 43.671000] sd 0:0:0:0: [sda] Write Protect is off
[ 43.671038] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 43.671045] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 43.671095] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 43.702464] sd 0:0:0:0: [sda] Attached SCSI disk
[ 43.702599] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10
PQ: 0 ANSI: 5
[ 43.702708] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108
MB)
[ 43.702752] sd 1:0:0:0: [sdb] Write Protect is off
[ 43.702790] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 43.702799] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 43.702869] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108
MB)
[ 43.702912] sd 1:0:0:0: [sdb] Write Protect is off
[ 43.702949] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 43.702957] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 43.703006] sdb: sdb1 sdb2
[ 43.783458] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 43.783595] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64
irq 1,12
[ 43.786170] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 43.786210] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 43.811212] usbcore: registered new interface driver usbhid
[ 43.811251] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 43.811295] TCP cubic registered
[ 43.811334] NET: Registered protocol family 1
[ 43.811388] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor
6000+ processors (2 cpu cores) (version 2.20.00)
[ 43.811406] powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x6
[ 43.811445] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0x8
[ 43.811483] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xa
[ 43.811522] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xc
[ 43.811560] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0xe
[ 43.811598] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10
[ 43.811636] powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10
[ 43.811674] powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12
[ 43.838200] input: AT Translated Set 2 keyboard as /class/input/input2
[ 43.931524] ReiserFS: sda3: found reiserfs format "3.6" with standard
journal
[ 43.931567] ReiserFS: sda3: using ordered data mode
[ 43.941099] ReiserFS: sda3: journal params: device sda3, size 8192, journal
first block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
[ 43.941987] ReiserFS: sda3: checking transaction log (sda3)
[ 43.993714] ReiserFS: sda3: Using r5 hash to sort names
[ 43.993765] VFS: Mounted root (reiserfs filesystem) readonly.
[ 43.993815] Freeing unused kernel memory: 176k freed
[ 44.971314] Clocksource tsc unstable (delta = -333322752 ns)
[ 46.105770] ReiserFS: sda3: switching to journaled data mode
[ 46.199182] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 46.199389] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[ 46.199394] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19
(level, low) -> IRQ 19
[ 46.199403] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 46.199408] r8169 0000:01:00.0: no MSI. Back to INTx.
[ 46.199532] eth0: RTL8168b/8111b at 0xffffc20000170000, 00:19:66:47:f3:cb,
XID 38000000 IRQ 19
[ 46.205916] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 46.205922] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22
(level, low) -> IRQ 22
[ 46.206070] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 46.206073] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 46.206147] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus
number 1
[ 46.206168] ehci_hcd 0000:00:02.1: debug port 1
[ 46.206171] PCI: cache line size of 64 is not supported by device
0000:00:02.1
[ 46.206177] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00
[ 46.209018] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
[ 46.209099] usb usb1: configuration #1 chosen from 1 choice
[ 46.209115] hub 1-0:1.0: USB hub found
[ 46.209121] hub 1-0:1.0: 10 ports detected
[ 46.318388] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 46.360226] usb 1-3: configuration #1 chosen from 1 choice
[ 46.360310] hub 1-3:1.0: USB hub found
[ 46.360421] hub 1-3:1.0: 4 ports detected
[ 46.361379] reiser4: sdb2: found disk format 4.0.0.
[ 46.457125] usb 1-3.1: new low speed USB device using ehci_hcd and address
3
[ 46.487187] usb 1-3.1: configuration #1 chosen from 1 choice
[ 46.490723] input: Logitech USB Receiver as /class/input/input3
[ 46.496916] input: USB HID v1.11 Mouse [Logitech USB Receiver] on
usb-0000:00:02.1-3.1
[ 46.498954] input: Logitech USB Receiver as /class/input/input4
[ 46.514984] input: USB HID v1.11 Device [Logitech USB Receiver] on
usb-0000:00:02.1-3.1
[ 46.523874] mice: PS/2 mouse device common for all mice
[ 54.781342] reiser4: sda6: found disk format 4.0.0.
[ 55.243478] reiser4: sdb1: found disk format 4.0.0.
[ 55.613500] Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1
across:1951888k
[ 56.942240] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[ 56.942246] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18
(level, low) -> IRQ 18
[ 56.943338] Audigy2 value: Special config.
[ 58.501961] w83627ehf: Found W83627EHG chip at 0x290
[ 59.483214] r8169: eth0: link up
[ 59.483219] r8169: eth0: link up
[ 60.168060] NET: Registered protocol family 17
In short, no changes at all.
If you need more information, please tell me so.
Glück Auf,
Volker
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists