| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 4 Apr 2008 17:33:45 +0400
From: Sergei Shtylyov <sshtylyov@...mvista.com>
To: ralf@...ux-mips.org
Cc: linux-mips@...ux-mips.org, linux-kernel@...r.kernel.org
Subject: [PATCH] Alchemy: move UART platform code to its proper place (take 2)
Move the code registering the Alchemy UART platform devices from drivers/serial
to its proper place, into the Alchemy platform code. Fix the related Kconfig
entry, while at it...
Signed-off-by: Sergei Shtylyov <sshtylyov@...mvista.com>
---
Note that we don't register UART platform devices if CONFIG_SERIAL_8250_AU1X00
is defined (the same way that the old code behaved) since if the 8250.c driver
is built without this option, it won't be able to correctly access the Alchemy
UART registers.
Ralf, please update the patch in your queue...
drivers/serial/8250_au1x00.c | 100 -------------------------------------
arch/mips/au1000/common/platform.c | 57 +++++++++++++++++++++
drivers/serial/Kconfig | 8 +-
drivers/serial/Makefile | 1
4 files changed, 61 insertions(+), 105 deletions(-)
Index: linux-2.6/arch/mips/au1000/common/platform.c
===================================================================
--- linux-2.6.orig/arch/mips/au1000/common/platform.c
+++ linux-2.6/arch/mips/au1000/common/platform.c
@@ -3,16 +3,65 @@
*
* Copyright 2004, Matt Porter <mporter@...nel.crashing.org>
*
+ * (C) Copyright Embedded Alley Solutions, Inc 2005
+ * Author: Pantelis Antoniou <pantelis@...eddedalley.com>
+ *
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
#include <linux/init.h>
#include <asm/mach-au1x00/au1xxx.h>
+#define PORT(_base, _irq) \
+ { \
+ .iobase = _base, \
+ .membase = (void __iomem *)_base,\
+ .mapbase = CPHYSADDR(_base), \
+ .irq = _irq, \
+ .regshift = 2, \
+ .iotype = UPIO_AU, \
+ .flags = UPF_SKIP_TEST \
+ }
+
+static struct plat_serial8250_port au1x00_uart_data[] = {
+#if defined(CONFIG_SERIAL_8250_AU1X00)
+#if defined(CONFIG_SOC_AU1000)
+ PORT(UART0_ADDR, AU1000_UART0_INT),
+ PORT(UART1_ADDR, AU1000_UART1_INT),
+ PORT(UART2_ADDR, AU1000_UART2_INT),
+ PORT(UART3_ADDR, AU1000_UART3_INT),
+#elif defined(CONFIG_SOC_AU1500)
+ PORT(UART0_ADDR, AU1500_UART0_INT),
+ PORT(UART3_ADDR, AU1500_UART3_INT),
+#elif defined(CONFIG_SOC_AU1100)
+ PORT(UART0_ADDR, AU1100_UART0_INT),
+ PORT(UART1_ADDR, AU1100_UART1_INT),
+ PORT(UART3_ADDR, AU1100_UART3_INT),
+#elif defined(CONFIG_SOC_AU1550)
+ PORT(UART0_ADDR, AU1550_UART0_INT),
+ PORT(UART1_ADDR, AU1550_UART1_INT),
+ PORT(UART3_ADDR, AU1550_UART3_INT),
+#elif defined(CONFIG_SOC_AU1200)
+ PORT(UART0_ADDR, AU1200_UART0_INT),
+ PORT(UART1_ADDR, AU1200_UART1_INT),
+#endif
+#endif /* CONFIG_SERIAL_8250_AU1X00 */
+ { },
+};
+
+static struct platform_device au1xx0_uart_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_AU1X00,
+ .dev = {
+ .platform_data = au1x00_uart_data,
+ },
+};
+
/* OHCI (USB full speed host controller) */
static struct resource au1xxx_usb_ohci_resources[] = {
[0] = {
@@ -287,6 +336,7 @@ static struct platform_device pbdb_smbus
#endif
static struct platform_device *au1xxx_platform_devices[] __initdata = {
+ &au1xx0_uart_device,
&au1xxx_usb_ohci_device,
&au1x00_pcmcia_device,
#ifdef CONFIG_FB_AU1100
@@ -310,6 +360,13 @@ static struct platform_device *au1xxx_pl
int __init au1xxx_platform_init(void)
{
+ unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
+ int i;
+
+ /* Fill up uartclk. */
+ for (i = 0; au1x00_uart_data[i].flags ; i++)
+ au1x00_uart_data[i].uartclk = uartclk;
+
return platform_add_devices(au1xxx_platform_devices, ARRAY_SIZE(au1xxx_platform_devices));
}
Index: linux-2.6/drivers/serial/8250_au1x00.c
===================================================================
--- linux-2.6.orig/drivers/serial/8250_au1x00.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Serial Device Initialisation for Au1x00
- *
- * (C) Copyright Embedded Alley Solutions, Inc 2005
- * Author: Pantelis Antoniou <pantelis@...eddedalley.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/serial_core.h>
-#include <linux/signal.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-
-#include <linux/serial_8250.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-#include "8250.h"
-
-#define PORT(_base, _irq) \
- { \
- .iobase = _base, \
- .membase = (void __iomem *)_base,\
- .mapbase = CPHYSADDR(_base), \
- .irq = _irq, \
- .uartclk = 0, /* filled */ \
- .regshift = 2, \
- .iotype = UPIO_AU, \
- .flags = UPF_SKIP_TEST \
- }
-
-static struct plat_serial8250_port au1x00_data[] = {
-#if defined(CONFIG_SOC_AU1000)
- PORT(UART0_ADDR, AU1000_UART0_INT),
- PORT(UART1_ADDR, AU1000_UART1_INT),
- PORT(UART2_ADDR, AU1000_UART2_INT),
- PORT(UART3_ADDR, AU1000_UART3_INT),
-#elif defined(CONFIG_SOC_AU1500)
- PORT(UART0_ADDR, AU1500_UART0_INT),
- PORT(UART3_ADDR, AU1500_UART3_INT),
-#elif defined(CONFIG_SOC_AU1100)
- PORT(UART0_ADDR, AU1100_UART0_INT),
- PORT(UART1_ADDR, AU1100_UART1_INT),
- /* The internal UART2 does not exist on the AU1100 processor. */
- PORT(UART3_ADDR, AU1100_UART3_INT),
-#elif defined(CONFIG_SOC_AU1550)
- PORT(UART0_ADDR, AU1550_UART0_INT),
- PORT(UART1_ADDR, AU1550_UART1_INT),
- PORT(UART3_ADDR, AU1550_UART3_INT),
-#elif defined(CONFIG_SOC_AU1200)
- PORT(UART0_ADDR, AU1200_UART0_INT),
- PORT(UART1_ADDR, AU1200_UART1_INT),
-#endif
- { },
-};
-
-static struct platform_device au1x00_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_AU1X00,
- .dev = {
- .platform_data = au1x00_data,
- },
-};
-
-static int __init au1x00_init(void)
-{
- int i;
- unsigned int uartclk;
-
- /* get uart clock */
- uartclk = get_au1x00_uart_baud_base() * 16;
-
- /* fill up uartclk */
- for (i = 0; au1x00_data[i].flags ; i++)
- au1x00_data[i].uartclk = uartclk;
-
- return platform_device_register(&au1x00_device);
-}
-
-/* XXX: Yes, I know this doesn't yet work. */
-static void __exit au1x00_exit(void)
-{
- platform_device_unregister(&au1x00_device);
-}
-
-module_init(au1x00_init);
-module_exit(au1x00_exit);
-
-MODULE_AUTHOR("Pantelis Antoniou <pantelis@...eddedalley.com>");
-MODULE_DESCRIPTION("8250 serial probe module for Au1x000 cards");
-MODULE_LICENSE("GPL");
Index: linux-2.6/drivers/serial/Kconfig
===================================================================
--- linux-2.6.orig/drivers/serial/Kconfig
+++ linux-2.6/drivers/serial/Kconfig
@@ -262,12 +262,12 @@ config SERIAL_8250_ACORN
cards. If unsure, say N.
config SERIAL_8250_AU1X00
- bool "AU1X00 serial port support"
+ bool "Au1x00 serial port support"
depends on SERIAL_8250 != n && SOC_AU1X00
help
- If you have an Au1x00 board and want to use the serial port, say Y
- to this option. The driver can handle 1 or 2 serial ports.
- If unsure, say N.
+ If you have an Au1x00 SOC based board and want to use the serial port,
+ say Y to this option. The driver can handle up to 4 serial ports,
+ depending on the SOC. If unsure, say N.
config SERIAL_8250_RM9K
bool "Support for MIPS RM9xxx integrated serial port"
Index: linux-2.6/drivers/serial/Makefile
===================================================================
--- linux-2.6.orig/drivers/serial/Makefile
+++ linux-2.6/drivers/serial/Makefile
@@ -20,7 +20,6 @@ obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_b
obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o
obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
-obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o
obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists