| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 16 Apr 2008 17:44:13 -0700
From: Yinghai Lu <yhlu.kernel.send@...il.com>
To: Ingo Molnar <mingo@...e.hu>, "H. Peter Anvin" <hpa@...or.com>,
Thomas Gleixner <tglx@...utronix.de>
Cc: linux-kernel@...r.kernel.org
Subject: [PATCH] x86_64: clean up aperture_64.c
1. use symbolic register names where appropriate.
2. num to bus or slot changing
3. handle for new opteron for bus other than 0
Signed-off-by: Yinghai Lu <yhlu.kernel@...il.com>
Index: linux-2.6/arch/x86/kernel/aperture_64.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/aperture_64.c
+++ linux-2.6/arch/x86/kernel/aperture_64.c
@@ -35,6 +35,18 @@ int fallback_aper_force __initdata;
int fix_aperture __initdata = 1;
+struct bus_dev_range {
+ int bus;
+ int dev_base;
+ int dev_limit;
+};
+
+static struct bus_dev_range bus_dev_ranges[] __initdata = {
+ { 0x00, 0x18, 0x20},
+ { 0xff, 0x00, 0x20},
+ { 0xfe, 0x00, 0x20}
+};
+
static struct resource gart_resource = {
.name = "GART",
.flags = IORESOURCE_MEM,
@@ -120,33 +132,33 @@ static int __init aperture_valid(u64 ape
}
/* Find a PCI capability */
-static __u32 __init find_cap(int num, int slot, int func, int cap)
+static __u32 __init find_cap(int bus, int slot, int func, int cap)
{
int bytes;
u8 pos;
- if (!(read_pci_config_16(num, slot, func, PCI_STATUS) &
+ if (!(read_pci_config_16(bus, slot, func, PCI_STATUS) &
PCI_STATUS_CAP_LIST))
return 0;
- pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST);
+ pos = read_pci_config_byte(bus, slot, func, PCI_CAPABILITY_LIST);
for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) {
u8 id;
pos &= ~3;
- id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID);
+ id = read_pci_config_byte(bus, slot, func, pos+PCI_CAP_LIST_ID);
if (id == 0xff)
break;
if (id == cap)
return pos;
- pos = read_pci_config_byte(num, slot, func,
+ pos = read_pci_config_byte(bus, slot, func,
pos+PCI_CAP_LIST_NEXT);
}
return 0;
}
/* Read a standard AGPv3 bridge header */
-static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order)
+static __u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order)
{
u32 apsize;
u32 apsizereg;
@@ -155,8 +167,8 @@ static __u32 __init read_agp(int num, in
u64 aper;
u32 old_order;
- printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", num, slot, func);
- apsizereg = read_pci_config_16(num, slot, func, cap + 0x14);
+ printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", bus, slot, func);
+ apsizereg = read_pci_config_16(bus, slot, func, cap + 0x14);
if (apsizereg == 0xffffffff) {
printk(KERN_ERR "APSIZE in AGP bridge unreadable\n");
return 0;
@@ -174,8 +186,8 @@ static __u32 __init read_agp(int num, in
if ((int)*order < 0) /* < 32MB */
*order = 0;
- aper_low = read_pci_config(num, slot, func, 0x10);
- aper_hi = read_pci_config(num, slot, func, 0x14);
+ aper_low = read_pci_config(bus, slot, func, 0x10);
+ aper_hi = read_pci_config(bus, slot, func, 0x14);
aper = (aper_low & ~((1<<22)-1)) | ((u64)aper_hi << 32);
/*
@@ -213,15 +225,15 @@ static __u32 __init read_agp(int num, in
*/
static __u32 __init search_agp_bridge(u32 *order, int *valid_agp)
{
- int num, slot, func;
+ int bus, slot, func;
/* Poor man's PCI discovery */
- for (num = 0; num < 256; num++) {
+ for (bus = 0; bus < 256; bus++) {
for (slot = 0; slot < 32; slot++) {
for (func = 0; func < 8; func++) {
u32 class, cap;
u8 type;
- class = read_pci_config(num, slot, func,
+ class = read_pci_config(bus, slot, func,
PCI_CLASS_REVISION);
if (class == 0xffffffff)
break;
@@ -230,17 +242,17 @@ static __u32 __init search_agp_bridge(u3
case PCI_CLASS_BRIDGE_HOST:
case PCI_CLASS_BRIDGE_OTHER: /* needed? */
/* AGP bridge? */
- cap = find_cap(num, slot, func,
+ cap = find_cap(bus, slot, func,
PCI_CAP_ID_AGP);
if (!cap)
break;
*valid_agp = 1;
- return read_agp(num, slot, func, cap,
+ return read_agp(bus, slot, func, cap,
order);
}
/* No multi-function device? */
- type = read_pci_config_byte(num, slot, func,
+ type = read_pci_config_byte(bus, slot, func,
PCI_HEADER_TYPE);
if (!(type & 0x80))
break;
@@ -280,38 +292,49 @@ void __init early_gart_iommu_check(void)
* or BIOS forget to put that in reserved.
* try to update e820 to make that region as reserved.
*/
- int fix, num;
+ int fix, slot;
u32 ctl;
u32 aper_size = 0, aper_order = 0, last_aper_order = 0;
u64 aper_base = 0, last_aper_base = 0;
int aper_enabled = 0, last_aper_enabled = 0;
+ int i;
if (!early_pci_allowed())
return;
fix = 0;
- for (num = 24; num < 32; num++) {
- if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
- continue;
-
- ctl = read_pci_config(0, num, 3, 0x90);
- aper_enabled = ctl & 1;
- aper_order = (ctl >> 1) & 7;
- aper_size = (32 * 1024 * 1024) << aper_order;
- aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff;
- aper_base <<= 25;
-
- if ((last_aper_order && aper_order != last_aper_order) ||
- (last_aper_base && aper_base != last_aper_base) ||
- (last_aper_enabled && aper_enabled != last_aper_enabled)) {
- fix = 1;
- break;
+ for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) {
+ int bus;
+ int dev_base, dev_limit;
+
+ bus = bus_dev_ranges[i].bus;
+ dev_base = bus_dev_ranges[i].dev_base;
+ dev_limit = bus_dev_ranges[i].dev_limit;
+
+ for (slot = dev_base; slot < dev_limit; slot++) {
+ if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+ continue;
+
+ ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL);
+ aper_enabled = ctl & AMD64_GARTEN;
+ aper_order = (ctl >> 1) & 7;
+ aper_size = (32 * 1024 * 1024) << aper_order;
+ aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff;
+ aper_base <<= 25;
+
+ if ((last_aper_order && aper_order != last_aper_order) ||
+ (last_aper_base && aper_base != last_aper_base) ||
+ (last_aper_enabled && aper_enabled != last_aper_enabled)) {
+ fix = 1;
+ goto out;
+ }
+ last_aper_order = aper_order;
+ last_aper_base = aper_base;
+ last_aper_enabled = aper_enabled;
}
- last_aper_order = aper_order;
- last_aper_base = aper_base;
- last_aper_enabled = aper_enabled;
}
+out:
if (!fix && !aper_enabled)
return;
@@ -330,13 +353,22 @@ void __init early_gart_iommu_check(void)
}
/* different nodes have different setting, disable them all at first*/
- for (num = 24; num < 32; num++) {
- if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
- continue;
-
- ctl = read_pci_config(0, num, 3, 0x90);
- ctl &= ~1;
- write_pci_config(0, num, 3, 0x90, ctl);
+ for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) {
+ int bus;
+ int dev_base, dev_limit;
+
+ bus = bus_dev_ranges[i].bus;
+ dev_base = bus_dev_ranges[i].dev_base;
+ dev_limit = bus_dev_ranges[i].dev_limit;
+
+ for (slot = dev_base; slot < dev_limit; slot++) {
+ if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+ continue;
+
+ ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL);
+ ctl &= ~AMD64_GARTEN;
+ write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, ctl);
+ }
}
}
@@ -348,8 +380,8 @@ void __init gart_iommu_hole_init(void)
u32 agp_aper_base = 0, agp_aper_order = 0;
u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0;
u64 aper_base, last_aper_base = 0;
- int fix, num, valid_agp = 0;
- int node;
+ int fix, slot, valid_agp = 0;
+ int i, node;
if (gart_iommu_aperture_disabled || !fix_aperture ||
!early_pci_allowed())
@@ -362,48 +394,58 @@ void __init gart_iommu_hole_init(void)
fix = 0;
node = 0;
- for (num = 24; num < 32; num++) {
- if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
- continue;
-
- iommu_detected = 1;
- gart_iommu_aperture = 1;
-
- aper_order = (read_pci_config(0, num, 3, 0x90) >> 1) & 7;
- aper_size = (32 * 1024 * 1024) << aper_order;
- aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff;
- aper_base <<= 25;
-
- printk(KERN_INFO "Node %d: aperture @ %Lx size %u MB\n",
- node, aper_base, aper_size >> 20);
- node++;
-
- if (!aperture_valid(aper_base, aper_size, 64<<20)) {
- if (valid_agp && agp_aper_base &&
- agp_aper_base == aper_base &&
- agp_aper_order == aper_order) {
- /* the same between two setting from NB and agp */
- if (!no_iommu && end_pfn > MAX_DMA32_PFN && !printed_gart_size_msg) {
- printk(KERN_ERR "you are using iommu with agp, but GART size is less than 64M\n");
- printk(KERN_ERR "please increase GART size in your BIOS setup\n");
- printk(KERN_ERR "if BIOS doesn't have that option, contact your HW vendor!\n");
- printed_gart_size_msg = 1;
+ for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) {
+ int bus;
+ int dev_base, dev_limit;
+
+ bus = bus_dev_ranges[i].bus;
+ dev_base = bus_dev_ranges[i].dev_base;
+ dev_limit = bus_dev_ranges[i].dev_limit;
+
+ for (slot = dev_base; slot < dev_limit; slot++) {
+ if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+ continue;
+
+ iommu_detected = 1;
+ gart_iommu_aperture = 1;
+
+ aper_order = (read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL) >> 1) & 7;
+ aper_size = (32 * 1024 * 1024) << aper_order;
+ aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff;
+ aper_base <<= 25;
+
+ printk(KERN_INFO "Node %d: aperture @ %Lx size %u MB\n",
+ node, aper_base, aper_size >> 20);
+ node++;
+
+ if (!aperture_valid(aper_base, aper_size, 64<<20)) {
+ if (valid_agp && agp_aper_base &&
+ agp_aper_base == aper_base &&
+ agp_aper_order == aper_order) {
+ /* the same between two setting from NB and agp */
+ if (!no_iommu && end_pfn > MAX_DMA32_PFN && !printed_gart_size_msg) {
+ printk(KERN_ERR "you are using iommu with agp, but GART size is less than 64M\n");
+ printk(KERN_ERR "please increase GART size in your BIOS setup\n");
+ printk(KERN_ERR "if BIOS doesn't have that option, contact your HW vendor!\n");
+ printed_gart_size_msg = 1;
+ }
+ } else {
+ fix = 1;
+ goto out;
}
- } else {
- fix = 1;
- break;
}
- }
- if ((last_aper_order && aper_order != last_aper_order) ||
- (last_aper_base && aper_base != last_aper_base)) {
- fix = 1;
- break;
+ if ((last_aper_order && aper_order != last_aper_order) ||
+ (last_aper_base && aper_base != last_aper_base)) {
+ fix = 1;
+ goto out;
+ }
+ last_aper_order = aper_order;
+ last_aper_base = aper_base;
}
- last_aper_order = aper_order;
- last_aper_base = aper_base;
}
+out:
if (!fix && !fallback_aper_force) {
if (last_aper_base) {
unsigned long n = (32 * 1024 * 1024) << last_aper_order;
@@ -452,16 +494,22 @@ void __init gart_iommu_hole_init(void)
}
/* Fix up the north bridges */
- for (num = 24; num < 32; num++) {
- if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
- continue;
-
- /*
- * Don't enable translation yet. That is done later.
- * Assume this BIOS didn't initialise the GART so
- * just overwrite all previous bits
- */
- write_pci_config(0, num, 3, 0x90, aper_order<<1);
- write_pci_config(0, num, 3, 0x94, aper_alloc>>25);
+ for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) {
+ int bus;
+ int dev_base, dev_limit;
+
+ bus = bus_dev_ranges[i].bus;
+ dev_base = bus_dev_ranges[i].dev_base;
+ dev_limit = bus_dev_ranges[i].dev_limit;
+ for (slot = dev_base; slot < dev_limit; slot++) {
+ if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+ continue;
+
+ /* Don't enable translation yet. That is done later.
+ Assume this BIOS didn't initialise the GART so
+ just overwrite all previous bits */
+ write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, aper_order << 1);
+ write_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE, aper_alloc >> 25);
+ }
}
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists