Jun 10 19:14:05 upstairs kernel: klogd 1.3-3, log source = /proc/kmsg started.
Jun 10 19:14:05 upstairs kernel: Inspecting /boot/System.map-2.6.26-rc5-git2
Jun 10 19:14:05 upstairs kernel: Loaded 26388 symbols from /boot/System.map-2.6.26-rc5-git2.
Jun 10 19:14:05 upstairs kernel: Symbols match kernel version 2.6.26.
Jun 10 19:14:05 upstairs kernel: No module symbols loaded - kernel modules not enabled. 
Jun 10 19:14:05 upstairs kernel: d 
Jun 10 19:14:05 upstairs kernel: [    6.238912] PM: Adding info for No Bus:usbdev7.2_ep83 
Jun 10 19:14:05 upstairs kernel: [    6.238912] drivers/usb/core/inode.c: creating file '002' 
Jun 10 19:14:05 upstairs kernel: [    6.238912] driver: '7-1': driver_bound: bound to device 'usb' 
Jun 10 19:14:05 upstairs kernel: [    6.238912] bus: 'usb': really_probe: bound device 7-1 to driver usb 
Jun 10 19:14:05 upstairs kernel: [    6.238912] device: 'usbdev7.2_ep00': device_add 
Jun 10 19:14:05 upstairs kernel: [    6.238912] PM: Adding info for No Bus:usbdev7.2_ep00 
Jun 10 19:14:05 upstairs kernel: [    6.238912] usb 7-1: New USB device found, idVendor=2040, idProduct=9950 
Jun 10 19:14:05 upstairs kernel: [    6.239959] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 
Jun 10 19:14:05 upstairs kernel: [    6.240012] usb 7-1: Product: WinTV Nova-DT 
Jun 10 19:14:05 upstairs kernel: [    6.240062] usb 7-1: Manufacturer: Hauppauge 
Jun 10 19:14:05 upstairs kernel: [    6.240112] usb 7-1: SerialNumber: 4030248054 
Jun 10 19:14:05 upstairs kernel: [    6.240166] uhci_hcd 0000:02:09.0: port 2 portsc 018a,00 
Jun 10 19:14:05 upstairs kernel: [    6.240175] hub 7-0:1.0: port 2, status 0300, change 0003, 1.5 Mb/s 
Jun 10 19:14:05 upstairs kernel: [    6.343916] hub 7-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x300 
Jun 10 19:14:05 upstairs kernel: [    6.343920] hub 6-0:1.0: state 7 ports 3 chg 0000 evt 0004 
Jun 10 19:14:05 upstairs kernel: [    6.343925] hub 6-2:1.0: state 7 ports 4 chg 0000 evt 0000 
Jun 10 19:14:05 upstairs kernel: [    6.354523] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 
Jun 10 19:14:05 upstairs kernel: [    6.497290] driver: '8-0:1.0': driver_bound: bound to device 'hub' 
Jun 10 19:14:05 upstairs kernel: [    6.497290] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 
Jun 10 19:14:05 upstairs kernel: [    6.497290] bus: 'usb': really_probe: bound device 8-0:1.0 to driver hub 
Jun 10 19:14:05 upstairs kernel: [    6.497290] device: 'usbdev8.1_ep81': device_add 
Jun 10 19:14:05 upstairs kernel: [    6.497290] PM: Adding info for No Bus:usbdev8.1_ep81 
Jun 10 19:14:05 upstairs kernel: [    6.497290] drivers/usb/core/inode.c: creating file '001' 
Jun 10 19:14:05 upstairs kernel: [    6.497290] driver: 'usb8': driver_bound: bound to device 'usb' 
Jun 10 19:14:05 upstairs kernel: [    6.497290] bus: 'usb': really_probe: bound device usb8 to driver usb 
Jun 10 19:14:05 upstairs kernel: [    6.497290] device: 'usbdev8.1_ep00': device_add 
Jun 10 19:14:05 upstairs kernel: [    6.497290] PM: Adding info for No Bus:usbdev8.1_ep00 
Jun 10 19:14:05 upstairs kernel: [    6.498149] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 
Jun 10 19:14:05 upstairs kernel: [    6.498204] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 
Jun 10 19:14:05 upstairs kernel: [    6.498266] usb usb8: Product: OHCI Host Controller 
Jun 10 19:14:05 upstairs kernel: [    6.498293] usb usb8: Manufacturer: Linux 2.6.26-rc5-git2 ohci_hcd 
Jun 10 19:14:05 upstairs kernel: [    6.498349] usb usb8: SerialNumber: 0000:02:0a.1 
Jun 10 19:14:05 upstairs kernel: [    6.498405] driver: '0000:02:0a.1': driver_bound: bound to device 'ohci_hcd' 
Jun 10 19:14:05 upstairs kernel: [    6.498408] bus: 'pci': really_probe: bound device 0000:02:0a.1 to driver ohci_hcd 
Jun 10 19:14:05 upstairs kernel: [    6.499396] bus: 'pci': driver_probe_device: matched device 0000:02:09.1 with driver uhci_hcd 
Jun 10 19:14:05 upstairs kernel: [    6.499400] bus: 'pci': really_probe: probing driver uhci_hcd with device 0000:02:09.1 
Jun 10 19:14:05 upstairs kernel: [    6.499419] ACPI: PCI Interrupt 0000:02:09.1[B] -> GSI 18 (level, low) -> IRQ 18 
Jun 10 19:14:05 upstairs kernel: [    6.499523] uhci_hcd 0000:02:09.1: UHCI Host Controller 
Jun 10 19:14:05 upstairs kernel: [    6.499579] device: 'usb_host9': device_add 
Jun 10 19:14:05 upstairs kernel: [    6.499591] PM: Adding info for No Bus:usb_host9 
Jun 10 19:14:05 upstairs kernel: [    6.499605] drivers/usb/core/inode.c: creating file '009' 
Jun 10 19:14:05 upstairs kernel: [    6.499610] uhci_hcd 0000:02:09.1: new USB bus registered, assigned bus number 9 
Jun 10 19:14:05 upstairs kernel: [    6.499675] uhci_hcd 0000:02:09.1: detected 2 ports 
Jun 10 19:14:05 upstairs kernel: [    6.499728] uhci_hcd 0000:02:09.1: uhci_check_and_reset_hc: cmd = 0x0000 
Jun 10 19:14:05 upstairs kernel: [    6.499730] uhci_hcd 0000:02:09.1: Performing full reset 
Jun 10 19:14:05 upstairs kernel: [    6.499747] uhci_hcd 0000:02:09.1: irq 18, io base 0x0000e800 
Jun 10 19:14:05 upstairs kernel: [    6.499829] usb usb9: default language 0x0409 
Jun 10 19:14:05 upstairs kernel: [    6.499838] device: 'usb9': device_add 
Jun 10 19:14:05 upstairs kernel: [    6.499865] bus: 'usb': add device usb9 
Jun 10 19:14:05 upstairs kernel: [    6.499870] PM: Adding info for usb:usb9 
Jun 10 19:14:05 upstairs kernel: [    6.499880] usb usb9: uevent 
Jun 10 19:14:05 upstairs kernel: [    6.499890] bus: 'usb': driver_probe_device: matched device usb9 with driver usb 
Jun 10 19:14:05 upstairs kernel: [    6.499892] bus: 'usb': really_probe: probing driver usb with device usb9 
Jun 10 19:14:05 upstairs kernel: [    6.499897] usb usb9: usb_probe_device 
Jun 10 19:14:05 upstairs kernel: [    6.499900] usb usb9: configuration #1 chosen from 1 choice 
Jun 10 19:14:05 upstairs kernel: [    6.499954] usb usb9: adding 9-0:1.0 (config #1, interface 0) 
Jun 10 19:14:05 upstairs kernel: [    6.499956] device: '9-0:1.0': device_add 
Jun 10 19:14:05 upstairs kernel: [    6.499969] bus: 'usb': add device 9-0:1.0 
Jun 10 19:14:05 upstairs kernel: [    6.499973] PM: Adding info for usb:9-0:1.0 
Jun 10 19:14:05 upstairs kernel: [    6.499979] usb 9-0:1.0: uevent 
Jun 10 19:14:05 upstairs kernel: [    6.499990] bus: 'usb': driver_probe_device: matched device 9-0:1.0 with driver hub 
Jun 10 19:14:05 upstairs kernel: [    6.499992] bus: 'usb': really_probe: probing driver hub with device 9-0:1.0 
Jun 10 19:14:05 upstairs kernel: [    6.499997] hub 9-0:1.0: usb_probe_interface 
Jun 10 19:14:05 upstairs kernel: [    6.499999] hub 9-0:1.0: usb_probe_interface - got id 
Jun 10 19:14:05 upstairs kernel: [    6.500001] hub 9-0:1.0: USB hub found 
Jun 10 19:14:05 upstairs kernel: [    6.500057] hub 9-0:1.0: 2 ports detected 
Jun 10 19:14:05 upstairs kernel: [    6.500107] hub 9-0:1.0: standalone hub 
Jun 10 19:14:05 upstairs kernel: [    6.500109] hub 9-0:1.0: no power switching (usb 1.0) 
Jun 10 19:14:05 upstairs kernel: [    6.500110] hub 9-0:1.0: individual port over-current protection 
Jun 10 19:14:05 upstairs kernel: [    6.500113] hub 9-0:1.0: power on to power good time: 2ms 
Jun 10 19:14:05 upstairs kernel: [    6.500117] hub 9-0:1.0: local power source is good 
Jun 10 19:14:05 upstairs kernel: [    6.500119] hub 9-0:1.0: trying to enable port power on non-switchable hub 
Jun 10 19:14:05 upstairs kernel: [    6.600298] driver: '9-0:1.0': driver_bound: bound to device 'hub' 
Jun 10 19:14:05 upstairs kernel: [    6.600302] bus: 'usb': really_probe: bound device 9-0:1.0 to driver hub 
Jun 10 19:14:05 upstairs kernel: [    6.600308] device: 'usbdev9.1_ep81': device_add 
Jun 10 19:14:05 upstairs kernel: [    6.600335] PM: Adding info for No Bus:usbdev9.1_ep81 
Jun 10 19:14:05 upstairs kernel: [    6.600351] drivers/usb/core/inode.c: creating file '001' 
Jun 10 19:14:05 upstairs kernel: [    6.600355] driver: 'usb9': driver_bound: bound to device 'usb' 
Jun 10 19:14:05 upstairs kernel: [    6.600358] bus: 'usb': really_probe: bound device usb9 to driver usb 
Jun 10 19:14:05 upstairs kernel: [    6.600364] device: 'usbdev9.1_ep00': device_add 
Jun 10 19:14:05 upstairs kernel: [    6.600381] PM: Adding info for No Bus:usbdev9.1_ep00 
Jun 10 19:14:05 upstairs kernel: [    6.600394] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 
Jun 10 19:14:05 upstairs kernel: [    6.600448] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 
Jun 10 19:14:05 upstairs kernel: [    6.600510] usb usb9: Product: UHCI Host Controller 
Jun 10 19:14:05 upstairs kernel: [    6.600561] usb usb9: Manufacturer: Linux 2.6.26-rc5-git2 uhci_hcd 
Jun 10 19:14:05 upstairs kernel: [    6.600613] usb usb9: SerialNumber: 0000:02:09.1 
Jun 10 19:14:05 upstairs kernel: [    6.600671] driver: '0000:02:09.1': driver_bound: bound to device 'uhci_hcd' 
Jun 10 19:14:05 upstairs kernel: [    6.600674] bus: 'pci': really_probe: bound device 0000:02:09.1 to driver uhci_hcd 
Jun 10 19:14:05 upstairs kernel: [    6.602522] hub 9-0:1.0: state 7 ports 2 chg 0000 evt 0006 
Jun 10 19:14:05 upstairs kernel: [    6.602522] bus: 'pci': driver_probe_device: matched device 0000:02:09.2 with driver ehci_hcd 
Jun 10 19:14:05 upstairs kernel: [    6.602526] bus: 'pci': really_probe: probing driver ehci_hcd with device 0000:02:09.2 
Jun 10 19:14:05 upstairs kernel: [    6.602537] uhci_hcd 0000:02:09.1: port 1 portsc 008a,00 
Jun 10 19:14:05 upstairs kernel: [    6.602547] hub 9-0:1.0: port 1, status 0100, change 0003, 12 Mb/s 
Jun 10 19:14:05 upstairs kernel: [    6.602547] ACPI: PCI Interrupt 0000:02:09.2[C] -> GSI 19 (level, low) -> IRQ 19 
Jun 10 19:14:05 upstairs kernel: [    6.602558] ehci_hcd 0000:02:09.2: EHCI Host Controller 
Jun 10 19:14:05 upstairs kernel: [    6.602563] device: 'usb_host10': device_add 
Jun 10 19:14:05 upstairs kernel: [    6.602574] PM: Adding info for No Bus:usb_host10 
Jun 10 19:14:05 upstairs kernel: [    6.602587] drivers/usb/core/inode.c: creating file '010' 
Jun 10 19:14:05 upstairs kernel: [    6.602592] ehci_hcd 0000:02:09.2: new USB bus registered, assigned bus number 10 
Jun 10 19:14:05 upstairs kernel: [    6.602598] ehci_hcd 0000:02:09.2: reset hcs_params 0x2204 dbg=0 cc=2 pcc=2 ordered !ppc ports=4 
Jun 10 19:14:05 upstairs kernel: [    6.602602] ehci_hcd 0000:02:09.2: reset hcc_params 6872 thresh 7 uframes 256/512/1024 
Jun 10 19:14:05 upstairs kernel: [    6.602621] ehci_hcd 0000:02:09.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT 
Jun 10 19:14:05 upstairs kernel: [    6.602638] ehci_hcd 0000:02:09.2: MWI active 
Jun 10 19:14:05 upstairs kernel: [    6.602640] ehci_hcd 0000:02:09.2: supports USB remote wakeup 
Jun 10 19:14:05 upstairs kernel: [    6.602646] ehci_hcd 0000:02:09.2: irq 19, io mem 0xfbfffc00 
Jun 10 19:14:05 upstairs kernel: [    6.602650] ehci_hcd 0000:02:09.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT 
Jun 10 19:14:05 upstairs kernel: [    6.602656] ehci_hcd 0000:02:09.2: init command 010009 (park)=0 ithresh=1 period=256 RUN 
Jun 10 19:14:05 upstairs kernel: [    6.608295] ehci_hcd 0000:02:09.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 
Jun 10 19:14:05 upstairs kernel: [    6.608370] usb usb10: default language 0x0409 
Jun 10 19:14:05 upstairs kernel: [    6.608378] device: 'usb10': device_add 
Jun 10 19:14:05 upstairs kernel: [    6.608404] bus: 'usb': add device usb10 
Jun 10 19:14:05 upstairs kernel: [    6.608410] PM: Adding info for usb:usb10 
Jun 10 19:14:05 upstairs kernel: [    6.608418] usb usb10: uevent 
Jun 10 19:14:05 upstairs kernel: [    6.608428] bus: 'usb': driver_probe_device: matched device usb10 with driver usb 
Jun 10 19:14:05 upstairs kernel: [    6.608431] bus: 'usb': really_probe: probing driver usb with device usb10 
Jun 10 19:14:05 upstairs kernel: [    6.608437] usb usb10: usb_probe_device 
Jun 10 19:14:05 upstairs kernel: [    6.608439] usb usb10: configuration #1 chosen from 1 choice 
Jun 10 19:14:05 upstairs kernel: [    6.608494] usb usb10: adding 10-0:1.0 (config #1, interface 0) 
Jun 10 19:14:05 upstairs kernel: [    6.608496] device: '10-0:1.0': device_add 
Jun 10 19:14:05 upstairs kernel: [    6.608506] bus: 'usb': add device 10-0:1.0 
Jun 10 19:14:05 upstairs kernel: [    6.608510] PM: Adding info for usb:10-0:1.0 
Jun 10 19:14:05 upstairs kernel: [    6.608517] usb 10-0:1.0: uevent 
Jun 10 19:14:05 upstairs kernel: [    6.608527] bus: 'usb': driver_probe_device: matched device 10-0:1.0 with driver hub 
Jun 10 19:14:05 upstairs kernel: [    6.608530] bus: 'usb': really_probe: probing driver hub with device 10-0:1.0 
Jun 10 19:14:05 upstairs kernel: [    6.608535] hub 10-0:1.0: usb_probe_interface 
Jun 10 19:14:05 upstairs kernel: [    6.608537] hub 10-0:1.0: usb_probe_interface - got id 
Jun 10 19:14:05 upstairs kernel: [    6.608539] hub 10-0:1.0: USB hub found 
Jun 10 19:14:05 upstairs kernel: [    6.608594] hub 10-0:1.0: 4 ports detected 
Jun 10 19:14:05 upstairs kernel: [    6.608644] hub 10-0:1.0: standalone hub 
Jun 10 19:14:05 upstairs kernel: [    6.608646] hub 10-0:1.0: no power switching (usb 1.0) 
Jun 10 19:14:05 upstairs kernel: [    6.608648] hub 10-0:1.0: individual port over-current protection 
Jun 10 19:14:05 upstairs kernel: [    6.608650] hub 10-0:1.0: power on to power good time: 20ms 
Jun 10 19:14:05 upstairs kernel: [    6.608654] hub 10-0:1.0: local power source is good 
Jun 10 19:14:05 upstairs kernel: [    6.608657] hub 10-0:1.0: trying to enable port power on non-switchable hub 
Jun 10 19:14:05 upstairs kernel: [    6.706301] hub 9-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 
Jun 10 19:14:05 upstairs kernel: [    6.706308] uhci_hcd 0000:02:09.1: port 2 portsc 018a,00 
Jun 10 19:14:05 upstairs kernel: [    6.706316] hub 9-0:1.0: port 2, status 0300, change 0003, 1.5 Mb/s 
Jun 10 19:14:05 upstairs kernel: [    6.710246] driver: '10-0:1.0': driver_bound: bound to device 'hub' 
Jun 10 19:14:05 upstairs kernel: [    6.710250] bus: 'usb': really_probe: bound device 10-0:1.0 to driver hub 
Jun 10 19:14:05 upstairs kernel: [    6.710257] device: 'usbdev10.1_ep81': device_add 
Jun 10 19:14:05 upstairs kernel: [    6.710279] PM: Adding info for No Bus:usbdev10.1_ep81 
Jun 10 19:14:05 upstairs kernel: [    6.710288] drivers/usb/core/inode.c: creating file '001' 
Jun 10 19:14:05 upstairs kernel: [    6.710288] driver: 'usb10': driver_bound: bound to device 'usb' 
Jun 10 19:14:05 upstairs kernel: [    6.710288] bus: 'usb': really_probe: bound device usb10 to driver usb 
Jun 10 19:14:05 upstairs kernel: [    6.710288] device: 'usbdev10.1_ep00': device_add 
Jun 10 19:14:05 upstairs kernel: [    6.710288] PM: Adding info for No Bus:usbdev10.1_ep00 
Jun 10 19:14:05 upstairs kernel: [    6.710288] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002 
Jun 10 19:14:05 upstairs kernel: [    6.710288] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 
Jun 10 19:14:05 upstairs kernel: [    6.710288] usb usb10: Product: EHCI Host Controller 
Jun 10 19:14:05 upstairs kernel: [    6.710288] usb usb10: Manufacturer: Linux 2.6.26-rc5-git2 ehci_hcd 
Jun 10 19:14:05 upstairs kernel: [    6.710288] usb usb10: SerialNumber: 0000:02:09.2 
Jun 10 19:14:05 upstairs kernel: [    6.710288] driver: '0000:02:09.2': driver_bound: bound to device 'ehci_hcd' 
Jun 10 19:14:05 upstairs kernel: [    6.710288] bus: 'pci': really_probe: bound device 0000:02:09.2 to driver ehci_hcd 
Jun 10 19:14:05 upstairs kernel: [    6.711733] bus: 'pci': driver_probe_device: matched device 0000:02:0a.2 with driver ehci_hcd 
Jun 10 19:14:05 upstairs kernel: [    6.711736] bus: 'pci': really_probe: probing driver ehci_hcd with device 0000:02:0a.2 
Jun 10 19:14:05 upstairs kernel: [    6.711756] ACPI: PCI Interrupt 0000:02:0a.2[C] -> GSI 23 (level, low) -> IRQ 23 
Jun 10 19:14:05 upstairs kernel: [    6.711867] ehci_hcd 0000:02:0a.2: EHCI Host Controller 
Jun 10 19:14:05 upstairs kernel: [    6.711922] device: 'usb_host11': device_add 
Jun 10 19:14:05 upstairs kernel: [    6.711934] PM: Adding info for No Bus:usb_host11 
Jun 10 19:14:05 upstairs kernel: [    6.711948] drivers/usb/core/inode.c: creating file '011' 
Jun 10 19:14:05 upstairs kernel: [    6.711953] ehci_hcd 0000:02:0a.2: new USB bus registered, assigned bus number 11 
Jun 10 19:14:05 upstairs kernel: [    6.712020] ehci_hcd 0000:02:0a.2: reset hcs_params 0x2395 dbg=0 cc=2 pcc=3 ports=5 
Jun 10 19:14:05 upstairs kernel: [    6.712026] ehci_hcd 0000:02:0a.2: reset portroute 1 0 1 0 0  
Jun 10 19:14:05 upstairs kernel: [    6.712030] ehci_hcd 0000:02:0a.2: reset hcc_params 0002 thresh 0 uframes 256/512/1024 
Jun 10 19:14:05 upstairs kernel: [    6.712050] ehci_hcd 0000:02:0a.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT 
Jun 10 19:14:05 upstairs kernel: [    6.712056] ehci_hcd 0000:02:0a.2: ...powerup ports... 
Jun 10 19:14:05 upstairs kernel: [    6.732419] ehci_hcd 0000:02:0a.2: MWI active 
Jun 10 19:14:05 upstairs kernel: [    6.732425] ehci_hcd 0000:02:0a.2: supports USB remote wakeup 
Jun 10 19:14:05 upstairs kernel: [    6.732435] ehci_hcd 0000:02:0a.2: irq 23, io mem 0xfbfff800 
Jun 10 19:14:05 upstairs kernel: [    6.732493] ehci_hcd 0000:02:0a.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT 
Jun 10 19:14:05 upstairs kernel: [    6.732499] ehci_hcd 0000:02:0a.2: init command 010009 (park)=0 ithresh=1 period=256 RUN 
Jun 10 19:14:05 upstairs kernel: [    6.738397] ehci_hcd 0000:02:0a.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004 
Jun 10 19:14:05 upstairs kernel: [    6.738477] usb usb11: default language 0x0409 
Jun 10 19:14:05 upstairs kernel: [    6.738485] device: 'usb11': device_add 
Jun 10 19:14:05 upstairs kernel: [    6.738515] bus: 'usb': add device usb11 
Jun 10 19:14:05 upstairs kernel: [    6.738527] PM: Adding info for usb:usb11 
Jun 10 19:14:05 upstairs kernel: [    6.738536] usb usb11: uevent 
Jun 10 19:14:05 upstairs kernel: [    6.738550] bus: 'usb': driver_probe_device: matched device usb11 with driver usb 
Jun 10 19:14:05 upstairs kernel: [    6.738553] bus: 'usb': really_probe: probing driver usb with device usb11 
Jun 10 19:14:05 upstairs kernel: [    6.738561] usb usb11: usb_probe_device 
Jun 10 19:14:05 upstairs kernel: [    6.738564] usb usb11: configuration #1 chosen from 1 choice 
Jun 10 19:14:05 upstairs kernel: [    6.738620] usb usb11: adding 11-0:1.0 (config #1, interface 0) 
Jun 10 19:14:05 upstairs kernel: [    6.738623] device: '11-0:1.0': device_add 
Jun 10 19:14:05 upstairs kernel: [    6.738633] bus: 'usb': add device 11-0:1.0 
Jun 10 19:14:05 upstairs kernel: [    6.738637] PM: Adding info for usb:11-0:1.0 
Jun 10 19:14:05 upstairs kernel: [    6.738643] usb 11-0:1.0: uevent 
Jun 10 19:14:05 upstairs kernel: [    6.738654] bus: 'usb': driver_probe_device: matched device 11-0:1.0 with driver hub 
Jun 10 19:14:05 upstairs kernel: [    6.738656] bus: 'usb': really_probe: probing driver hub with device 11-0:1.0 
Jun 10 19:14:05 upstairs kernel: [    6.738663] hub 11-0:1.0: usb_probe_interface 
Jun 10 19:14:05 upstairs kernel: [    6.738665] hub 11-0:1.0: usb_probe_interface - got id 
Jun 10 19:14:05 upstairs kernel: [    6.738667] hub 11-0:1.0: USB hub found 
Jun 10 19:14:05 upstairs kernel: [    6.738723] hub 11-0:1.0: 5 ports detected 
Jun 10 19:14:05 upstairs kernel: [    6.738772] hub 11-0:1.0: standalone hub 
Jun 10 19:14:05 upstairs kernel: [    6.738774] hub 11-0:1.0: individual port power switching 
Jun 10 19:14:05 upstairs kernel: [    6.738776] hub 11-0:1.0: individual port over-current protection 
Jun 10 19:14:05 upstairs kernel: [    6.738779] hub 11-0:1.0: power on to power good time: 20ms 
Jun 10 19:14:05 upstairs kernel: [    6.738783] hub 11-0:1.0: local power source is good 
Jun 10 19:14:05 upstairs kernel: [    6.738785] hub 11-0:1.0: enabling power on all ports 
Jun 10 19:14:05 upstairs kernel: [    6.810301] hub 9-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x300 
Jun 10 19:14:05 upstairs kernel: [    6.810306] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0002 
Jun 10 19:14:05 upstairs kernel: [    6.810313] uhci_hcd 0000:02:09.0: port 1 portsc 009a,00 
Jun 10 19:14:05 upstairs kernel: [    6.810321] hub 7-0:1.0: port 1, status 0100, change 0003, 12 Mb/s 
Jun 10 19:14:05 upstairs kernel: [    6.810324] usb 7-1: USB disconnect, address 2 
Jun 10 19:14:05 upstairs kernel: [    6.810375] usb 7-1: unregistering device 
Jun 10 19:14:05 upstairs kernel: [    6.810377] usb 7-1: usb_disable_device nuking all URBs 
Jun 10 19:14:05 upstairs kernel: [    6.810382] usb 7-1: unregistering interface 7-1:1.0 
Jun 10 19:14:05 upstairs kernel: [    6.810384] PM: Removing info for usb:7-1:1.0 
Jun 10 19:14:05 upstairs kernel: [    6.810400] bus: 'usb': remove device 7-1:1.0 
Jun 10 19:14:05 upstairs kernel: [    6.810407] usb 7-1:1.0: uevent 
Jun 10 19:14:05 upstairs kernel: [    6.810422] device: 'usbdev7.2_ep01': device_unregister 
Jun 10 19:14:05 upstairs kernel: [    6.810425] PM: Removing info for No Bus:usbdev7.2_ep01 
Jun 10 19:14:05 upstairs kernel: [    6.810452] device: 'usbdev7.2_ep81': device_unregister 
Jun 10 19:14:05 upstairs kernel: [    6.810454] PM: Removing info for No Bus:usbdev7.2_ep81 
Jun 10 19:14:05 upstairs kernel: [    6.810476] device: 'usbdev7.2_ep82': device_unregister 
Jun 10 19:14:05 upstairs kernel: [    6.810478] PM: Removing info for No Bus:usbdev7.2_ep82 
Jun 10 19:14:05 upstairs kernel: [    6.810500] device: 'usbdev7.2_ep83': device_unregister 
Jun 10 19:14:05 upstairs kernel: [    6.810502] PM: Removing info for No Bus:usbdev7.2_ep83 
Jun 10 19:14:05 upstairs kernel: [    6.810527] device: 'usbdev7.2_ep00': device_unregister 
Jun 10 19:14:05 upstairs kernel: [    6.810529] PM: Removing info for No Bus:usbdev7.2_ep00 
Jun 10 19:14:05 upstairs kernel: [    6.810555] PM: Removing info for usb:7-1 
Jun 10 19:14:05 upstairs kernel: [    6.810579] bus: 'usb': remove device 7-1 
Jun 10 19:14:05 upstairs kernel: [    6.810591] usb 7-1: uevent 
Jun 10 19:14:05 upstairs kernel: [    6.826817] ohci_hcd 0000:02:0a.0: urb f76dfb00 path 2 ep1in 5f160000 cc 5 --> status -62 
Jun 10 19:14:05 upstairs kernel: [    6.826817] hub 6-2:1.0: transfer --> -62 
Jun 10 19:14:05 upstairs kernel: [    6.839297] driver: '11-0:1.0': driver_bound: bound to device 'hub' 
Jun 10 19:14:05 upstairs kernel: [    6.839300] bus: 'usb': really_probe: bound device 11-0:1.0 to driver hub 
Jun 10 19:14:05 upstairs kernel: [    6.839306] device: 'usbdev11.1_ep81': device_add 
Jun 10 19:14:05 upstairs kernel: [    6.839328] PM: Adding info for No Bus:usbdev11.1_ep81 
Jun 10 19:14:05 upstairs kernel: [    6.839344] drivers/usb/core/inode.c: creating file '001' 
Jun 10 19:14:05 upstairs kernel: [    6.839349] driver: 'usb11': driver_bound: bound to device 'usb' 
Jun 10 19:14:05 upstairs kernel: [    6.839352] bus: 'usb': really_probe: bound device usb11 to driver usb 
Jun 10 19:14:05 upstairs kernel: [    6.839357] device: 'usbdev11.1_ep00': device_add 
Jun 10 19:14:05 upstairs kernel: [    6.839374] PM: Adding info for No Bus:usbdev11.1_ep00 
Jun 10 19:14:05 upstairs kernel: [    6.839387] usb usb11: New USB device found, idVendor=1d6b, idProduct=0002 
Jun 10 19:14:05 upstairs kernel: [    6.839442] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1 
Jun 10 19:14:05 upstairs kernel: [    6.839504] usb usb11: Product: EHCI Host Controller 
Jun 10 19:14:05 upstairs kernel: [    6.839555] usb usb11: Manufacturer: Linux 2.6.26-rc5-git2 ehci_hcd 
Jun 10 19:14:05 upstairs kernel: [    6.839607] usb usb11: SerialNumber: 0000:02:0a.2 
Jun 10 19:14:05 upstairs kernel: [    6.839659] driver: '0000:02:0a.2': driver_bound: bound to device 'ehci_hcd' 
Jun 10 19:14:05 upstairs kernel: [    6.839662] bus: 'pci': really_probe: bound device 0000:02:0a.2 to driver ehci_hcd 
Jun 10 19:14:05 upstairs kernel: [    6.892636] bus: 'i2c': registered 
Jun 10 19:14:05 upstairs kernel: [    6.892641] device class 'i2c-adapter': registering 
Jun 10 19:14:05 upstairs kernel: [    6.892654] bus: 'i2c': add driver dummy 
Jun 10 19:14:05 upstairs kernel: [    6.914309] hub 7-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 
Jun 10 19:14:05 upstairs kernel: [    6.914316] hub 10-0:1.0: state 7 ports 4 chg 0000 evt 0000 
Jun 10 19:14:05 upstairs kernel: [    6.914325] ehci_hcd 0000:02:09.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT 
Jun 10 19:14:05 upstairs kernel: [    6.914332] hub 10-0:1.0: port 1, status 0501, change 0001, 480 Mb/s 
Jun 10 19:14:05 upstairs kernel: [    6.922801] ohci_hcd 0000:02:0a.0: urb f76dfb00 path 2 ep1in 5e160000 cc 5 --> status -62 
Jun 10 19:14:05 upstairs kernel: [    6.922808] hub 6-2:1.0: transfer --> -62 
Jun 10 19:14:05 upstairs kernel: [    6.947291] device class 'firmware': registering 
Jun 10 19:14:05 upstairs kernel: [    6.963959] device class 'dvb': registering 
Jun 10 19:14:05 upstairs kernel: [    6.967903] bus: 'usb': add driver usbhid 
Jun 10 19:14:05 upstairs kernel: [    6.967925] bus: 'usb': driver_probe_device: matched device 2-2:1.0 with driver usbhid 
Jun 10 19:14:05 upstairs kernel: [    6.967928] bus: 'usb': really_probe: probing driver usbhid with device 2-2:1.0 
Jun 10 19:14:05 upstairs kernel: [    6.967934] usbhid 2-2:1.0: usb_probe_interface 
Jun 10 19:14:05 upstairs kernel: [    6.967936] usbhid 2-2:1.0: usb_probe_interface - got id 
Jun 10 19:14:05 upstairs kernel: [    6.981833] device: 'input3': device_add 
Jun 10 19:14:05 upstairs kernel: [    6.981865] PM: Adding info for No Bus:input3 
Jun 10 19:14:05 upstairs kernel: [    6.981903] input: Microsft Microsoft Wireless Desktop Receiver 3.1A as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input3 
Jun 10 19:14:05 upstairs kernel: [    6.982335] uhci_hcd 0000:00:1d.1: reserve dev 4 ep81-INT, period 8, phase 4, 118 us 
Jun 10 19:14:05 upstairs kernel: [    6.983576] device: 'event3': device_add 
Jun 10 19:14:05 upstairs kernel: [    6.983587] PM: Adding info for No Bus:event3 
Jun 10 19:14:05 upstairs kernel: [    6.983600] input: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1A] on usb-0000:00:1d.1-2 
Jun 10 19:14:05 upstairs kernel: [    6.983760] driver: '2-2:1.0': driver_bound: bound to device 'usbhid' 
Jun 10 19:14:05 upstairs kernel: [    6.983763] bus: 'usb': really_probe: bound device 2-2:1.0 to driver usbhid 
Jun 10 19:14:05 upstairs kernel: [    6.983767] bus: 'usb': driver_probe_device: matched device 2-2:1.1 with driver usbhid 
Jun 10 19:14:05 upstairs kernel: [    6.983769] bus: 'usb': really_probe: probing driver usbhid with device 2-2:1.1 
Jun 10 19:14:05 upstairs kernel: [    6.983775] usbhid 2-2:1.1: usb_probe_interface 
Jun 10 19:14:05 upstairs kernel: [    6.983777] usbhid 2-2:1.1: usb_probe_interface - got id 
Jun 10 19:14:05 upstairs kernel: [    6.992291] dib0700: loaded with support for 7 different device-types 
Jun 10 19:14:05 upstairs kernel: [    6.992291] bus: 'usb': add driver dvb_usb_dib0700 
Jun 10 19:14:05 upstairs kernel: [    7.018301] hub 10-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 
Jun 10 19:14:05 upstairs kernel: [    7.018782] ohci_hcd 0000:02:0a.0: urb f76dfb00 path 2 ep1in 5f160000 cc 5 --> status -62 
Jun 10 19:14:05 upstairs kernel: [    7.018787] hub 6-2:1.0: transfer --> -62 
Jun 10 19:14:05 upstairs kernel: [    7.069540] ehci_hcd 0000:02:09.2: port 1 high speed 
Jun 10 19:14:05 upstairs kernel: [    7.069546] ehci_hcd 0000:02:09.2: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT 
Jun 10 19:14:05 upstairs kernel: [    7.114757] ohci_hcd 0000:02:0a.0: urb f76dfb00 path 2 ep1in 5e160000 cc 5 --> status -62 
Jun 10 19:14:05 upstairs kernel: [    7.114757] hub 6-2:1.0: transfer --> -62 
Jun 10 19:14:05 upstairs kernel: [    7.119542] device: 'input4': device_add 
Jun 10 19:14:05 upstairs kernel: [    7.119542] PM: Adding info for No Bus:input4 
Jun 10 19:14:05 upstairs kernel: [    7.119542] input: Microsft Microsoft Wireless Desktop Receiver 3.1A as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.1/input/input4 
Jun 10 19:14:05 upstairs kernel: [    7.119542] uhci_hcd 0000:00:1d.1: reserve dev 4 ep82-INT, period 8, phase 4, 118 us 
Jun 10 19:14:05 upstairs kernel: [    7.119542] device: 'mouse1': device_add 
Jun 10 19:14:05 upstairs kernel: [    7.119542] PM: Adding info for No Bus:mouse1 
Jun 10 19:14:05 upstairs kernel: [    7.120305] usb 10-1: new high speed USB device using ehci_hcd and address 2 
Jun 10 19:14:05 upstairs kernel: [    7.120687] device: 'event4': device_add 
Jun 10 19:14:05 upstairs kernel: [    7.120697] PM: Adding info for No Bus:event4 
Jun 10 19:14:05 upstairs kernel: [    7.120710] input: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1A] on usb-0000:00:1d.1-2 
Jun 10 19:14:05 upstairs kernel: [    7.120854] driver: '2-2:1.1': driver_bound: bound to device 'usbhid' 
Jun 10 19:14:05 upstairs kernel: [    7.120857] bus: 'usb': really_probe: bound device 2-2:1.1 to driver usbhid 
Jun 10 19:14:05 upstairs kernel: [    7.132922] usb 10-1: default language 0x0409 
Jun 10 19:14:05 upstairs kernel: [    7.133293] device: '10-1': device_add 
Jun 10 19:14:05 upstairs kernel: [    7.133293] bus: 'usb': add device 10-1 
Jun 10 19:14:05 upstairs kernel: [    7.133293] PM: Adding info for usb:10-1 
Jun 10 19:14:05 upstairs kernel: [    7.133293] usb 10-1: uevent 
Jun 10 19:14:05 upstairs kernel: [    7.133293] bus: 'usb': driver_probe_device: matched device 10-1 with driver usb 
Jun 10 19:14:05 upstairs kernel: [    7.133293] bus: 'usb': really_probe: probing driver usb with device 10-1 
Jun 10 19:14:05 upstairs kernel: [    7.133293] usb 10-1: usb_probe_device 
Jun 10 19:14:05 upstairs kernel: [    7.133293] usb 10-1: configuration #1 chosen from 1 choice 
Jun 10 19:14:05 upstairs kernel: [    7.133293] usb 10-1: adding 10-1:1.0 (config #1, interface 0) 
Jun 10 19:14:05 upstairs kernel: [    7.133293] device: '10-1:1.0': device_add 
Jun 10 19:14:05 upstairs kernel: [    7.133293] bus: 'usb': add device 10-1:1.0 
Jun 10 19:14:05 upstairs kernel: [    7.133293] PM: Adding info for usb:10-1:1.0 
Jun 10 19:14:05 upstairs kernel: [    7.133293] usb 10-1:1.0: uevent 
Jun 10 19:14:05 upstairs kernel: [    7.133293] device: 'usbdev10.2_ep01': device_add 
Jun 10 19:14:05 upstairs kernel: [    7.133293] PM: Adding info for No Bus:usbdev10.2_ep01 
Jun 10 19:14:05 upstairs kernel: [    7.133293] device: 'usbdev10.2_ep81': device_add 
Jun 10 19:14:05 upstairs kernel: [    7.133293] PM: Adding info for No Bus:usbdev10.2_ep81 
Jun 10 19:14:05 upstairs kernel: [    7.133293] device: 'usbdev10.2_ep82': device_add 
Jun 10 19:14:05 upstairs kernel: [    7.133293] PM: Adding info for No Bus:usbdev10.2_ep82 
Jun 10 19:14:05 upstairs kernel: [    7.133293] device: 'usbdev10.2_ep83': device_add 
Jun 10 19:14:05 upstairs kernel: [    7.133293] PM: Adding info for No Bus:usbdev10.2_ep83 
Jun 10 19:14:05 upstairs kernel: [    7.133293] drivers/usb/core/inode.c: creating file '002' 
Jun 10 19:14:05 upstairs kernel: [    7.133293] driver: '10-1': driver_bound: bound to device 'usb' 
Jun 10 19:14:05 upstairs kernel: [    7.133293] bus: 'usb': really_probe: bound device 10-1 to driver usb 
Jun 10 19:14:05 upstairs kernel: [    7.133293] device: 'usbdev10.2_ep00': device_add 
Jun 10 19:14:05 upstairs kernel: [    7.133293] PM: Adding info for No Bus:usbdev10.2_ep00 
Jun 10 19:14:05 upstairs kernel: [    7.133293] usb 10-1: New USB device found, idVendor=2040, idProduct=9950 
Jun 10 19:14:05 upstairs kernel: [    7.133293] usb 10-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 
Jun 10 19:14:05 upstairs kernel: [    7.133293] usb 10-1: Product: WinTV Nova-DT 
Jun 10 19:14:05 upstairs kernel: [    7.133293] usb 10-1: Manufacturer: Hauppauge 
Jun 10 19:14:05 upstairs kernel: [    7.133293] usb 10-1: SerialNumber: 4030248054 
Jun 10 19:14:05 upstairs kernel: [    7.133293] hub 6-0:1.0: state 7 ports 3 chg 0000 evt 0004 
Jun 10 19:14:05 upstairs kernel: [    7.133293] ohci_hcd 0000:02:0a.0: GetStatus roothub.portstatus [1] = 0x00030100 PESC CSC PPS 
Jun 10 19:14:05 upstairs kernel: [    7.133293] hub 6-0:1.0: port 2, status 0100, change 0003, 12 Mb/s 
Jun 10 19:14:05 upstairs kernel: [    7.133293] usb 6-2: USB disconnect, address 2 
Jun 10 19:14:05 upstairs kernel: [    7.133293] usb 6-2: unregistering device 
Jun 10 19:14:05 upstairs kernel: [    7.133293] usb 6-2: usb_disable_device nuking all URBs 
Jun 10 19:14:05 upstairs kernel: [    7.133293] ohci_hcd 0000:02:0a.0: shutdown urb f76dfb00 ep1in-intr 
Jun 10 19:14:05 upstairs kernel: [    7.133293] usbcore: registered new interface driver usbhid 
Jun 10 19:14:05 upstairs kernel: [    7.133293] usbhid: v2.6:USB HID core driver 
Jun 10 19:14:05 upstairs kernel: [    7.135292] bus: 'usb': driver_probe_device: matched device 10-1:1.0 with driver dvb_usb_dib0700 
Jun 10 19:14:05 upstairs kernel: [    7.135292] bus: 'usb': really_probe: probing driver dvb_usb_dib0700 with device 10-1:1.0 
Jun 10 19:14:05 upstairs kernel: [    7.135292] dvb_usb_dib0700 10-1:1.0: usb_probe_interface 
Jun 10 19:14:05 upstairs kernel: [    7.135292] dvb_usb_dib0700 10-1:1.0: usb_probe_interface - got id 
Jun 10 19:14:05 upstairs kernel: [    7.135292] usb 6-2: unregistering interface 6-2:1.0 
Jun 10 19:14:05 upstairs kernel: [    7.135292] PM: Removing info for usb:6-2:1.0 
Jun 10 19:14:05 upstairs kernel: [    7.135292] bus: 'usb': remove device 6-2:1.0 
Jun 10 19:14:05 upstairs kernel: [    7.135292] usb 6-2:1.0: uevent 
Jun 10 19:14:05 upstairs kernel: [    7.135292] device: 'usbdev6.2_ep81': device_unregister 
Jun 10 19:14:05 upstairs kernel: [    7.135292] PM: Removing info for No Bus:usbdev6.2_ep81 
Jun 10 19:14:05 upstairs kernel: [    7.135292] device: 'usbdev6.2_ep00': device_unregister 
Jun 10 19:14:05 upstairs kernel: [    7.135292] PM: Removing info for No Bus:usbdev6.2_ep00 
Jun 10 19:14:05 upstairs kernel: [    7.135292] PM: Removing info for usb:6-2 
Jun 10 19:14:05 upstairs kernel: [    7.135292] bus: 'usb': remove device 6-2 
Jun 10 19:14:05 upstairs kernel: [    7.135292] usb 6-2: uevent 
Jun 10 19:14:05 upstairs kernel: [    7.135292] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. 
Jun 10 19:14:05 upstairs kernel: [    7.136301] device: 'i2c-0': device_add 
Jun 10 19:14:05 upstairs kernel: [    7.136312] PM: Adding info for No Bus:i2c-0 
Jun 10 19:14:05 upstairs kernel: [    7.136326] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. 
Jun 10 19:14:05 upstairs kernel: [    7.136612] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) 
Jun 10 19:14:05 upstairs kernel: [    7.136731] device: 'dvb0.demux0': device_add 
Jun 10 19:14:05 upstairs kernel: [    7.136731] PM: Adding info for No Bus:dvb0.demux0 
Jun 10 19:14:05 upstairs kernel: [    7.136731] device: 'dvb0.dvr0': device_add 
Jun 10 19:14:05 upstairs kernel: [    7.136731] PM: Adding info for No Bus:dvb0.dvr0 
Jun 10 19:14:05 upstairs kernel: [    7.136749] device: 'dvb0.net0': device_add 
Jun 10 19:14:05 upstairs kernel: [    7.136757] PM: Adding info for No Bus:dvb0.net0 
Jun 10 19:14:05 upstairs kernel: [    7.226291] device: 'i2c-1': device_add 
Jun 10 19:14:05 upstairs kernel: [    7.226291] PM: Adding info for No Bus:i2c-1 
Jun 10 19:14:05 upstairs kernel: [    7.230050] DVB: registering frontend 0 (DiBcom 3000MC/P)... 
Jun 10 19:14:05 upstairs kernel: [    7.230111] device: 'dvb0.frontend0': device_add 
Jun 10 19:14:05 upstairs kernel: [    7.230124] PM: Adding info for No Bus:dvb0.frontend0 
Jun 10 19:14:36 upstairs kernel: [    7.238303] hub 6-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 
Jun 10 19:14:36 upstairs kernel: [    7.238310] hub 11-0:1.0: state 7 ports 5 chg 0000 evt 0000 
Jun 10 19:14:36 upstairs kernel: [    7.238323] ehci_hcd 0000:02:0a.2: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT 
Jun 10 19:14:36 upstairs kernel: [    7.238331] hub 11-0:1.0: port 3, status 0501, change 0001, 480 Mb/s 
Jun 10 19:14:36 upstairs kernel: [    7.260292] MT2060: successfully identified (IF1 = 1230) 
Jun 10 19:14:36 upstairs kernel: [    7.342300] hub 11-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501 
Jun 10 19:14:36 upstairs kernel: [    7.393466] ehci_hcd 0000:02:0a.2: port 3 high speed 
Jun 10 19:14:36 upstairs kernel: [    7.393471] ehci_hcd 0000:02:0a.2: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT 
Jun 10 19:14:36 upstairs kernel: [    7.444310] usb 11-3: new high speed USB device using ehci_hcd and address 2 
Jun 10 19:14:36 upstairs kernel: [    7.457763] device: '11-3': device_add 
Jun 10 19:14:36 upstairs kernel: [    7.457793] bus: 'usb': add device 11-3 
Jun 10 19:14:36 upstairs kernel: [    7.457804] PM: Adding info for usb:11-3 
Jun 10 19:14:36 upstairs kernel: [    7.457814] usb 11-3: uevent 
Jun 10 19:14:36 upstairs kernel: [    7.457827] bus: 'usb': driver_probe_device: matched device 11-3 with driver usb 
Jun 10 19:14:36 upstairs kernel: [    7.457830] bus: 'usb': really_probe: probing driver usb with device 11-3 
Jun 10 19:14:36 upstairs kernel: [    7.457839] usb 11-3: usb_probe_device 
Jun 10 19:14:36 upstairs kernel: [    7.457842] usb 11-3: configuration #1 chosen from 1 choice 
Jun 10 19:14:36 upstairs kernel: [    7.458013] usb 11-3: adding 11-3:1.0 (config #1, interface 0) 
Jun 10 19:14:36 upstairs kernel: [    7.458016] device: '11-3:1.0': device_add 
Jun 10 19:14:36 upstairs kernel: [    7.458028] bus: 'usb': add device 11-3:1.0 
Jun 10 19:14:36 upstairs kernel: [    7.458033] PM: Adding info for usb:11-3:1.0 
Jun 10 19:14:36 upstairs kernel: [    7.458039] usb 11-3:1.0: uevent 
Jun 10 19:14:36 upstairs kernel: [    7.458051] bus: 'usb': driver_probe_device: matched device 11-3:1.0 with driver hub 
Jun 10 19:14:36 upstairs kernel: [    7.458053] bus: 'usb': really_probe: probing driver hub with device 11-3:1.0 
Jun 10 19:14:36 upstairs kernel: [    7.458060] hub 11-3:1.0: usb_probe_interface 
Jun 10 19:14:36 upstairs kernel: [    7.458062] hub 11-3:1.0: usb_probe_interface - got id 
Jun 10 19:14:36 upstairs kernel: [    7.458064] hub 11-3:1.0: USB hub found 
Jun 10 19:14:36 upstairs kernel: [    7.458258] hub 11-3:1.0: 4 ports detected 
Jun 10 19:14:36 upstairs kernel: [    7.458324] hub 11-3:1.0: standalone hub 
Jun 10 19:14:36 upstairs kernel: [    7.458327] hub 11-3:1.0: ganged power switching 
Jun 10 19:14:36 upstairs kernel: [    7.458329] hub 11-3:1.0: global over-current protection 
Jun 10 19:14:36 upstairs kernel: [    7.458331] hub 11-3:1.0: Single TT 
Jun 10 19:14:36 upstairs kernel: [    7.458333] hub 11-3:1.0: TT requires at most 16 FS bit times (1332 ns) 
Jun 10 19:14:36 upstairs kernel: [    7.458335] hub 11-3:1.0: Port indicators are supported 
Jun 10 19:14:36 upstairs kernel: [    7.458337] hub 11-3:1.0: power on to power good time: 100ms 
Jun 10 19:14:36 upstairs kernel: [    7.458636] hub 11-3:1.0: local power source is good 
Jun 10 19:14:36 upstairs kernel: [    7.458639] hub 11-3:1.0: no over-current condition exists 
Jun 10 19:14:36 upstairs kernel: [    7.458642] hub 11-3:1.0: enabling power on all ports 
Jun 10 19:14:36 upstairs kernel: [    7.559302] usb 11-3: link qh256-0001/f70fa100 start 255 [1/0 us] 
Jun 10 19:14:36 upstairs kernel: [    7.559310] driver: '11-3:1.0': driver_bound: bound to device 'hub' 
Jun 10 19:14:36 upstairs kernel: [    7.559313] bus: 'usb': really_probe: bound device 11-3:1.0 to driver hub 
Jun 10 19:14:36 upstairs kernel: [    7.559320] device: 'usbdev11.2_ep81': device_add 
Jun 10 19:14:36 upstairs kernel: [    7.559352] PM: Adding info for No Bus:usbdev11.2_ep81 
Jun 10 19:14:36 upstairs kernel: [    7.559370] drivers/usb/core/inode.c: creating file '002' 
Jun 10 19:14:36 upstairs kernel: [    7.559377] driver: '11-3': driver_bound: bound to device 'usb' 
Jun 10 19:14:36 upstairs kernel: [    7.559380] bus: 'usb': really_probe: bound device 11-3 to driver usb 
Jun 10 19:14:36 upstairs kernel: [    7.559389] device: 'usbdev11.2_ep00': device_add 
Jun 10 19:14:36 upstairs kernel: [    7.559406] PM: Adding info for No Bus:usbdev11.2_ep00 
Jun 10 19:14:36 upstairs kernel: [    7.559420] usb 11-3: New USB device found, idVendor=0409, idProduct=0059 
Jun 10 19:14:36 upstairs kernel: [    7.559478] usb 11-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 
Jun 10 19:14:36 upstairs kernel: [    7.559550] hub 11-3:1.0: state 7 ports 4 chg 0000 evt 0000 
Jun 10 19:14:36 upstairs kernel: [    7.708226] ohci_hcd 0000:02:0a.1: auto-stop root hub 
Jun 10 19:14:36 upstairs kernel: [    7.708226] usb usb9: suspend_rh (auto-stop) 
Jun 10 19:14:36 upstairs kernel: [    7.733195] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. 
Jun 10 19:14:36 upstairs kernel: [    7.733195] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) 
Jun 10 19:14:36 upstairs kernel: [    7.733195] device: 'dvb1.demux0': device_add 
Jun 10 19:14:36 upstairs kernel: [    7.733195] PM: Adding info for No Bus:dvb1.demux0 
Jun 10 19:14:36 upstairs kernel: [    7.733195] device: 'dvb1.dvr0': device_add 
Jun 10 19:14:36 upstairs kernel: [    7.733195] PM: Adding info for No Bus:dvb1.dvr0 
Jun 10 19:14:36 upstairs kernel: [    7.733195] device: 'dvb1.net0': device_add 
Jun 10 19:14:36 upstairs kernel: [    7.733195] PM: Adding info for No Bus:dvb1.net0 
Jun 10 19:14:36 upstairs kernel: [    7.740962] device: 'i2c-2': device_add 
Jun 10 19:14:36 upstairs kernel: [    7.740977] PM: Adding info for No Bus:i2c-2 
Jun 10 19:14:36 upstairs kernel: [    7.743463] DVB: registering frontend 1 (DiBcom 3000MC/P)... 
Jun 10 19:14:36 upstairs kernel: [    7.743529] device: 'dvb1.frontend0': device_add 
Jun 10 19:14:36 upstairs kernel: [    7.743547] PM: Adding info for No Bus:dvb1.frontend0 
Jun 10 19:14:36 upstairs kernel: [    7.748460] MT2060: successfully identified (IF1 = 1234) 
Jun 10 19:14:36 upstairs kernel: [    7.958215] usb usb7: suspend_rh (auto-stop) 
Jun 10 19:14:36 upstairs kernel: [    8.208211] ohci_hcd 0000:02:0a.0: auto-stop root hub 
Jun 10 19:14:36 upstairs kernel: [    8.248204] device: 'input5': device_add 
Jun 10 19:14:36 upstairs kernel: [    8.248204] PM: Adding info for No Bus:input5 
Jun 10 19:14:36 upstairs kernel: [    8.248204] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1e.0/0000:02:09.2/usb10/10-1/input/input5 
Jun 10 19:14:36 upstairs kernel: [    8.255024] device: 'event5': device_add 
Jun 10 19:14:36 upstairs kernel: [    8.255039] PM: Adding info for No Bus:event5 
Jun 10 19:14:36 upstairs kernel: [    8.255056] dvb-usb: schedule remote query interval to 150 msecs. 
Jun 10 19:14:36 upstairs kernel: [    8.255115] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected. 
Jun 10 19:14:36 upstairs kernel: [    8.255342] driver: '10-1:1.0': driver_bound: bound to device 'dvb_usb_dib0700' 
Jun 10 19:14:36 upstairs kernel: [    8.255347] bus: 'usb': really_probe: bound device 10-1:1.0 to driver dvb_usb_dib0700 
Jun 10 19:14:36 upstairs kernel: [    8.255369] usbcore: registered new interface driver dvb_usb_dib0700 
Jun 10 19:14:36 upstairs kernel: [   25.621292] fuse init (API version 7.9) 
Jun 10 19:14:36 upstairs kernel: [   25.621396] device: 'fuse': device_add 
Jun 10 19:14:36 upstairs kernel: [   25.621413] PM: Adding info for No Bus:fuse 
Jun 10 19:14:36 upstairs kernel: [   25.848583] device: '8:1-fuseblk': device_add 
Jun 10 19:14:36 upstairs kernel: [   25.848606] PM: Adding info for No Bus:8:1-fuseblk 
Jun 10 19:14:36 upstairs kernel: [   25.901286] kjournald starting.  Commit interval 5 seconds 
Jun 10 19:14:36 upstairs kernel: [   25.901286] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended 
Jun 10 19:14:36 upstairs kernel: [   25.901286] EXT3 FS on sdb6, internal journal 
Jun 10 19:14:36 upstairs kernel: [   25.901286] EXT3-fs: mounted filesystem with ordered data mode. 
Jun 10 19:14:36 upstairs kernel: [   25.920285] kjournald starting.  Commit interval 5 seconds 
Jun 10 19:14:36 upstairs kernel: [   25.927112] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended 
Jun 10 19:14:36 upstairs kernel: [   25.927112] EXT3 FS on sda6, internal journal 
Jun 10 19:14:36 upstairs kernel: [   25.930337] EXT3-fs: mounted filesystem with ordered data mode. 
Jun 10 19:14:36 upstairs kernel: [   25.941287] kjournald starting.  Commit interval 5 seconds 
Jun 10 19:14:36 upstairs kernel: [   25.947298] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended 
Jun 10 19:14:36 upstairs kernel: [   25.947298] EXT3 FS on sda7, internal journal 
Jun 10 19:14:36 upstairs kernel: [   25.947298] EXT3-fs: mounted filesystem with ordered data mode. 
Jun 10 19:14:36 upstairs kernel: [   25.970305] kjournald starting.  Commit interval 5 seconds 
Jun 10 19:14:36 upstairs kernel: [   25.980305] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended 
Jun 10 19:14:36 upstairs kernel: [   25.988964] EXT3 FS on sdc2, internal journal 
Jun 10 19:14:36 upstairs kernel: [   25.988964] EXT3-fs: mounted filesystem with ordered data mode. 
Jun 10 19:14:36 upstairs kernel: [   26.022049] Adding 4096532k swap on /dev/sda5.  Priority:-1 extents:1 across:4096532k 
Jun 10 19:14:36 upstairs kernel: [   26.730357] device: 'vcs1': device_unregister 
Jun 10 19:14:36 upstairs kernel: [   26.730362] PM: Removing info for No Bus:vcs1 
Jun 10 19:14:36 upstairs kernel: [   26.730404] device: 'vcs1': device_create_release 
Jun 10 19:14:36 upstairs kernel: [   26.730407] device: 'vcsa1': device_unregister 
Jun 10 19:14:36 upstairs kernel: [   26.730409] PM: Removing info for No Bus:vcsa1 
Jun 10 19:14:36 upstairs kernel: [   26.730429] device: 'vcsa1': device_create_release 
Jun 10 19:14:36 upstairs kernel: [   26.745475] device: 'vcs1': device_add 
Jun 10 19:14:36 upstairs kernel: [   26.745492] PM: Adding info for No Bus:vcs1 
Jun 10 19:14:36 upstairs kernel: [   26.745509] device: 'vcsa1': device_add 
Jun 10 19:14:36 upstairs kernel: [   26.745517] PM: Adding info for No Bus:vcsa1 
Jun 10 19:14:36 upstairs kernel: [   26.745581] device: 'vcs1': device_unregister 
Jun 10 19:14:36 upstairs kernel: [   26.745583] PM: Removing info for No Bus:vcs1 
Jun 10 19:14:36 upstairs kernel: [   26.745599] device: 'vcs1': device_create_release 
Jun 10 19:14:36 upstairs kernel: [   26.745602] device: 'vcsa1': device_unregister 
Jun 10 19:14:36 upstairs kernel: [   26.745603] PM: Removing info for No Bus:vcsa1 
Jun 10 19:14:36 upstairs kernel: [   26.745616] device: 'vcsa1': device_create_release 
Jun 10 19:14:36 upstairs kernel: [   26.745630] device: 'vcs1': device_add 
Jun 10 19:14:36 upstairs kernel: [   26.745639] PM: Adding info for No Bus:vcs1 
Jun 10 19:14:36 upstairs kernel: [   26.745649] device: 'vcsa1': device_add 
Jun 10 19:14:36 upstairs kernel: [   26.745656] PM: Adding info for No Bus:vcsa1 
Jun 10 19:14:36 upstairs kernel: [   26.745714] device: 'vcs1': device_unregister 
Jun 10 19:14:36 upstairs kernel: [   26.745716] PM: Removing info for No Bus:vcs1 
Jun 10 19:14:36 upstairs kernel: [   26.745729] device: 'vcs1': device_create_release 
Jun 10 19:14:36 upstairs kernel: [   26.745732] device: 'vcsa1': device_unregister 
Jun 10 19:14:36 upstairs kernel: [   26.745733] PM: Removing info for No Bus:vcsa1 
Jun 10 19:14:36 upstairs kernel: [   26.745745] device: 'vcsa1': device_create_release 
Jun 10 19:14:36 upstairs kernel: [   26.745757] device: 'vcs1': device_add 
Jun 10 19:14:36 upstairs kernel: [   26.745765] PM: Adding info for No Bus:vcs1 
Jun 10 19:14:36 upstairs kernel: [   26.745775] device: 'vcsa1': device_add 
Jun 10 19:14:36 upstairs kernel: [   26.745782] PM: Adding info for No Bus:vcsa1 
Jun 10 19:14:36 upstairs kernel: [   26.745885] device: 'vcs1': device_unregister 
Jun 10 19:14:36 upstairs kernel: [   26.745888] PM: Removing info for No Bus:vcs1 
Jun 10 19:14:36 upstairs kernel: [   26.745901] device: 'vcs1': device_create_release 
Jun 10 19:14:36 upstairs kernel: [   26.745904] device: 'vcsa1': device_unregister 
Jun 10 19:14:36 upstairs kernel: [   26.745906] PM: Removing info for No Bus:vcsa1 
Jun 10 19:14:36 upstairs kernel: [   26.745917] device: 'vcsa1': device_create_release 
Jun 10 19:14:36 upstairs kernel: [   26.745885] device: 'vcs1': device_add 
Jun 10 19:14:36 upstairs kernel: [   26.745885] PM: Adding info for No Bus:vcs1 
Jun 10 19:14:36 upstairs kernel: [   26.745885] device: 'vcsa1': device_add 
Jun 10 19:14:36 upstairs kernel: [   26.745885] PM: Adding info for No Bus:vcsa1 
Jun 10 19:14:36 upstairs kernel: [   26.861764] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 
Jun 10 19:14:36 upstairs kernel: [   28.023909] ip_tables: (C) 2000-2006 Netfilter Core Team 
Jun 10 19:14:36 upstairs kernel: [   28.029759] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) 
Jun 10 19:14:36 upstairs kernel: [   33.631050] bus: 'pci': remove driver parport_pc 
Jun 10 19:14:36 upstairs kernel: [   33.631325] driver: 'parport_pc': driver_release 
Jun 10 19:14:36 upstairs kernel: [   33.631333] bus: 'pnp': remove driver parport_pc 
Jun 10 19:14:36 upstairs kernel: [   33.631803] parport_pc 00:06: disabled 
Jun 10 19:14:36 upstairs kernel: [   33.632459] driver: 'parport_pc': driver_release 
Jun 10 19:14:36 upstairs kernel: [   33.632463] pnp: the driver 'parport_pc' has been unregistered 
Jun 10 19:14:36 upstairs kernel: [   33.632469] bus: 'platform': remove driver parport_pc 
Jun 10 19:14:36 upstairs kernel: [   33.632483] driver: 'parport_pc': driver_release 
Jun 10 19:14:36 upstairs kernel: [   33.638664] bus: 'pci': remove driver ohci1394 
Jun 10 19:14:36 upstairs kernel: [   33.638696] ieee1394: Node removed: ID:BUS[0-00:1023]  GUID[00110666000013cc] 
Jun 10 19:14:36 upstairs kernel: [   33.638700] device: '00110666000013cc': device_unregister 
Jun 10 19:14:36 upstairs kernel: [   33.638703] PM: Removing info for No Bus:00110666000013cc 
Jun 10 19:14:36 upstairs kernel: [   33.638728] device: '00110666000013cc': device_unregister 
Jun 10 19:14:36 upstairs kernel: [   33.638731] PM: Removing info for ieee1394:00110666000013cc 
Jun 10 19:14:36 upstairs kernel: [   33.638738] bus: 'ieee1394': remove device 00110666000013cc 
Jun 10 19:14:36 upstairs kernel: [   33.638755] device: 'fw-host0': device_unregister 
Jun 10 19:14:36 upstairs kernel: [   33.638758] PM: Removing info for No Bus:fw-host0 
Jun 10 19:14:36 upstairs kernel: [   33.638774] device: 'fw-host0': device_unregister 
Jun 10 19:14:36 upstairs kernel: [   33.638776] PM: Removing info for ieee1394:fw-host0 
Jun 10 19:14:36 upstairs kernel: [   33.638783] bus: 'ieee1394': remove device fw-host0 
Jun 10 19:14:36 upstairs kernel: [   33.644288] driver: 'ohci1394': driver_release 
Jun 10 19:14:36 upstairs kernel: [   33.650839] bus: 'ieee1394': remove driver nodemgr 
Jun 10 19:14:36 upstairs kernel: [   33.650855] driver: 'nodemgr': driver_release 
Jun 10 19:14:36 upstairs kernel: [   33.650858] device class 'ieee1394': unregistering 
Jun 10 19:14:36 upstairs kernel: [   33.650870] class 'ieee1394': release. 
Jun 10 19:14:36 upstairs kernel: [   33.650872] class 'ieee1394' does not have a release() function, be careful 
Jun 10 19:14:36 upstairs kernel: [   33.650875] device class 'ieee1394_node': unregistering 
Jun 10 19:14:36 upstairs kernel: [   33.650884] class 'ieee1394_node': release. 
Jun 10 19:14:36 upstairs kernel: [   33.650886] class 'ieee1394_node' does not have a release() function, be careful 
Jun 10 19:14:36 upstairs kernel: [   33.650889] device class 'ieee1394_protocol': unregistering 
Jun 10 19:14:36 upstairs kernel: [   33.650897] class 'ieee1394_protocol': release. 
Jun 10 19:14:36 upstairs kernel: [   33.650900] class_create_release called for ieee1394_protocol 
Jun 10 19:14:36 upstairs kernel: [   33.650902] device class 'ieee1394_host': unregistering 
Jun 10 19:14:36 upstairs kernel: [   33.650911] class 'ieee1394_host': release. 
Jun 10 19:14:36 upstairs kernel: [   33.650913] class 'ieee1394_host' does not have a release() function, be careful 
Jun 10 19:14:36 upstairs kernel: [   33.650919] bus: 'ieee1394': unregistering 
Jun 10 19:14:36 upstairs kernel: [   33.889343] device: 'vcs2': device_add 
Jun 10 19:14:36 upstairs kernel: [   33.889367] PM: Adding info for No Bus:vcs2 
Jun 10 19:14:36 upstairs kernel: [   33.889393] device: 'vcsa2': device_add 
Jun 10 19:14:36 upstairs kernel: [   33.889401] PM: Adding info for No Bus:vcsa2 
Jun 10 19:14:36 upstairs kernel: [   33.890188] device: 'vcs4': device_add 
Jun 10 19:14:36 upstairs kernel: [   33.890200] PM: Adding info for No Bus:vcs4 
Jun 10 19:14:36 upstairs kernel: [   33.890215] device: 'vcsa4': device_add 
Jun 10 19:14:36 upstairs kernel: [   33.890223] PM: Adding info for No Bus:vcsa4 
Jun 10 19:14:36 upstairs kernel: [   33.890692] device: 'vcs3': device_add 
Jun 10 19:14:36 upstairs kernel: [   33.890704] PM: Adding info for No Bus:vcs3 
Jun 10 19:14:36 upstairs kernel: [   33.890721] device: 'vcsa3': device_add 
Jun 10 19:14:36 upstairs kernel: [   33.890729] PM: Adding info for No Bus:vcsa3 
Jun 10 19:14:36 upstairs kernel: [   36.137134] device: 'vcs5': device_add 
Jun 10 19:14:36 upstairs kernel: [   36.137183] PM: Adding info for No Bus:vcs5 
Jun 10 19:14:36 upstairs kernel: [   36.137225] device: 'vcsa5': device_add 
Jun 10 19:14:36 upstairs kernel: [   36.137243] PM: Adding info for No Bus:vcsa5