linux-kernel - Re: Change console to another UART

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:	Wed, 18 Jun 2008 18:43:45 +0900
From:	"Nobuhiro Iwamatsu" <iwamatsu@...auri.org>
To:	oihana <munoz.o@...si.es>
Cc:	linux-sh@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: Change console to another UART

Hi,

2008/6/18 oihana <munoz.o@...si.es>:
> Hello,
>
> I am working with a STi7109 and mb411. The STi7109 has 4 UARTs and they
> are configured by default as follow....
> - UART0 is reserved for SC0
> - UART1 is reserved for SC1
> - UART2 is reserved for console
> - UART3 is reserved for KGDB
>
> What I need is to have the Console in the UART1 because I need the UART2
> free, and I have enough with one SC (SC0).
>
> I realized that if I change on my STWorkBench the Kernel Debug
> configuration, from ttyAS0 to ttyAS1, the console comes out from the
> other serial port, but it still uses the UART2.
>
> So I tried to change the configuration in the stasc.c
> (kernel/src/drivers/serial/stasc.c).
Hmm? I could not find it.
Is this a thing peculiar to ST?
You should send an email to support of ST if so.

Best regards,
 Nobuhiro
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/