lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Mon, 21 Jul 2008 18:36:26 -0700 From: Yinghai Lu <yhlu.kernel@...il.com> To: Ingo Molnar <mingo@...e.hu>, Thomas Gleixner <tglx@...utronix.de>, "H. Peter Anvin" <hpa@...or.com>, Jack Steiner <steiner@....com>, Suresh Siddha <suresh.b.siddha@...el.com> Cc: linux-kernel@...r.kernel.org Subject: [PATCH] x86: add apic probe for genapic 64bit so remove uv, x2apic related code from genapic_64.c to their specific genapic files Signed-off-by: Yinghai Lu <yhlu.kernel@...il.com> --- arch/x86/kernel/genapic_64.c | 87 +++++++++++------------------------- arch/x86/kernel/genapic_flat_64.c | 24 +++++++++ arch/x86/kernel/genx2apic_cluster.c | 11 ++++ arch/x86/kernel/genx2apic_phys.c | 21 ++++++++ arch/x86/kernel/genx2apic_uv_x.c | 32 ++++++++++++- include/asm-x86/genapic_64.h | 1 6 files changed, 115 insertions(+), 61 deletions(-) Index: linux-2.6/arch/x86/kernel/genapic_64.c =================================================================== --- linux-2.6.orig/arch/x86/kernel/genapic_64.c +++ linux-2.6/arch/x86/kernel/genapic_64.c @@ -16,62 +16,37 @@ #include <linux/ctype.h> #include <linux/init.h> #include <linux/hardirq.h> -#include <linux/dmar.h> #include <asm/smp.h> #include <asm/ipi.h> #include <asm/genapic.h> -#ifdef CONFIG_ACPI -#include <acpi/acpi_bus.h> -#endif - -DEFINE_PER_CPU(int, x2apic_extra_bits); +extern struct genapic apic_flat; +extern struct genapic apic_physflat; +extern struct genapic apic_x2xpic_uv_x; +extern struct genapic apic_x2apic_phys; +extern struct genapic apic_x2apic_cluster; struct genapic __read_mostly *genapic = &apic_flat; -static int x2apic_phys = 0; - -static int set_x2apic_phys_mode(char *arg) -{ - x2apic_phys = 1; - return 0; -} -early_param("x2apic_phys", set_x2apic_phys_mode); - -static enum uv_system_type uv_system_type; +static struct genapic *apic_probe[] __initdata = { + &apic_x2apic_uv_x, + &apic_x2apic_phys, + &apic_x2apic_cluster, + &apic_physflat, + NULL, +}; /* * Check the APIC IDs in bios_cpu_apicid and choose the APIC mode. */ void __init setup_apic_routing(void) { - if (uv_system_type == UV_NON_UNIQUE_APIC) - genapic = &apic_x2apic_uv_x; - else if (cpu_has_x2apic && intr_remapping_enabled) { - if (x2apic_phys) - genapic = &apic_x2apic_phys; - else - genapic = &apic_x2apic_cluster; - } else -#ifdef CONFIG_ACPI - /* - * Quirk: some x86_64 machines can only use physical APIC mode - * regardless of how many processors are present (x86_64 ES7000 - * is an example). - */ - if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID && - (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) - genapic = &apic_physflat; - else -#endif - - if (max_physical_apicid < 8) - genapic = &apic_flat; - else - genapic = &apic_physflat; - - printk(KERN_INFO "Setting APIC routing to %s\n", genapic->name); + if (genapic == &apic_flat) { + if (max_physical_apicid >= 8) + genapic = &apic_physflat; + printk(KERN_INFO "Setting APIC routing to %s\n", genapic->name); + } } /* Same for both flat and physical. */ @@ -83,23 +58,15 @@ void apic_send_IPI_self(int vector) int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id) { - if (!strcmp(oem_id, "SGI")) { - if (!strcmp(oem_table_id, "UVL")) - uv_system_type = UV_LEGACY_APIC; - else if (!strcmp(oem_table_id, "UVX")) - uv_system_type = UV_X2APIC; - else if (!strcmp(oem_table_id, "UVH")) - uv_system_type = UV_NON_UNIQUE_APIC; - } - return 0; -} - -enum uv_system_type get_uv_system_type(void) -{ - return uv_system_type; -} + int i; -int is_uv_system(void) -{ - return uv_system_type != UV_NONE; + for (i = 0; apic_probe[i]; ++i) { + if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) { + genapic = apic_probe[i]; + printk(KERN_INFO "Setting APIC routing to %s.\n", + genapic->name); + return 1; + } + } + return 0; } Index: linux-2.6/arch/x86/kernel/genapic_flat_64.c =================================================================== --- linux-2.6.orig/arch/x86/kernel/genapic_flat_64.c +++ linux-2.6/arch/x86/kernel/genapic_flat_64.c @@ -21,6 +21,15 @@ #include <asm/genapic.h> #include <mach_apicdef.h> +#ifdef CONFIG_ACPI +#include <acpi/acpi_bus.h> +#endif + +static int __init flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ + return 1; +} + static cpumask_t flat_target_cpus(void) { return cpu_online_map; @@ -138,6 +147,7 @@ static unsigned int phys_pkg_id(int inde struct genapic apic_flat = { .name = "flat", + .acpi_madt_oem_check = flat_acpi_madt_oem_check, .int_delivery_mode = dest_LowestPrio, .int_dest_mode = (APIC_DEST_LOGICAL != 0), .target_cpus = flat_target_cpus, @@ -160,6 +170,19 @@ struct genapic apic_flat = { * We cannot use logical delivery in this case because the mask * overflows, so use physical mode. */ +static int __init physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ + /* + * Quirk: some x86_64 machines can only use physical APIC mode + * regardless of how many processors are present (x86_64 ES7000 + * is an example). + */ + if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID && + (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) + return 1; + + return 0; +} static cpumask_t physflat_target_cpus(void) { @@ -206,6 +229,7 @@ static unsigned int physflat_cpu_mask_to struct genapic apic_physflat = { .name = "physical flat", + .acpi_madt_oem_check = physflat_acpi_madt_oem_check, .int_delivery_mode = dest_Fixed, .int_dest_mode = (APIC_DEST_PHYSICAL != 0), .target_cpus = physflat_target_cpus, Index: linux-2.6/arch/x86/kernel/genx2apic_cluster.c =================================================================== --- linux-2.6.orig/arch/x86/kernel/genx2apic_cluster.c +++ linux-2.6/arch/x86/kernel/genx2apic_cluster.c @@ -4,12 +4,22 @@ #include <linux/kernel.h> #include <linux/ctype.h> #include <linux/init.h> +#include <linux/dmar.h> + #include <asm/smp.h> #include <asm/ipi.h> #include <asm/genapic.h> DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid); +static int __init x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ + if (cpu_has_x2apic && intr_remapping_enabled) + return 1; + + return 0; +} + /* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */ static cpumask_t x2apic_target_cpus(void) @@ -135,6 +145,7 @@ static void init_x2apic_ldr(void) struct genapic apic_x2apic_cluster = { .name = "cluster x2apic", + .acpi_madt_oem_check = x2apic_acpi_madt_oem_check, .int_delivery_mode = dest_LowestPrio, .int_dest_mode = (APIC_DEST_LOGICAL != 0), .target_cpus = x2apic_target_cpus, Index: linux-2.6/arch/x86/kernel/genx2apic_phys.c =================================================================== --- linux-2.6.orig/arch/x86/kernel/genx2apic_phys.c +++ linux-2.6/arch/x86/kernel/genx2apic_phys.c @@ -4,10 +4,30 @@ #include <linux/kernel.h> #include <linux/ctype.h> #include <linux/init.h> +#include <linux/dmar.h> + #include <asm/smp.h> #include <asm/ipi.h> #include <asm/genapic.h> +DEFINE_PER_CPU(int, x2apic_extra_bits); + +static int x2apic_phys = 0; + +static int set_x2apic_phys_mode(char *arg) +{ + x2apic_phys = 1; + return 0; +} +early_param("x2apic_phys", set_x2apic_phys_mode); + +static int __init x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ + if (cpu_has_x2apic && intr_remapping_enabled && x2apic_phys) + return 1; + + return 0; +} /* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */ @@ -122,6 +142,7 @@ void init_x2apic_ldr(void) struct genapic apic_x2apic_phys = { .name = "physical x2apic", + .acpi_madt_oem_check = x2apic_acpi_madt_oem_check, .int_delivery_mode = dest_Fixed, .int_dest_mode = (APIC_DEST_PHYSICAL != 0), .target_cpus = x2apic_target_cpus, Index: linux-2.6/arch/x86/kernel/genx2apic_uv_x.c =================================================================== --- linux-2.6.orig/arch/x86/kernel/genx2apic_uv_x.c +++ linux-2.6/arch/x86/kernel/genx2apic_uv_x.c @@ -27,6 +27,33 @@ #include <asm/uv/uv_hub.h> #include <asm/uv/bios.h> +static enum uv_system_type uv_system_type; + +static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ + if (!strcmp(oem_id, "SGI")) { + if (!strcmp(oem_table_id, "UVL")) + uv_system_type = UV_LEGACY_APIC; + else if (!strcmp(oem_table_id, "UVX")) + uv_system_type = UV_X2APIC; + else if (!strcmp(oem_table_id, "UVH")) { + uv_system_type = UV_NON_UNIQUE_APIC; + return 1; + } + } + return 0; +} + +enum uv_system_type get_uv_system_type(void) +{ + return uv_system_type; +} + +int is_uv_system(void) +{ + return uv_system_type != UV_NONE; +} + DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info); EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info); @@ -153,7 +180,7 @@ static unsigned int get_apic_id(unsigned return id; } -static long set_apic_id(unsigned int id) +static unsigned long set_apic_id(unsigned int id) { unsigned long x; @@ -182,6 +209,7 @@ static void uv_send_IPI_self(int vector) struct genapic apic_x2apic_uv_x = { .name = "UV large system", + .acpi_madt_oem_check = uv_acpi_madt_oem_check, .int_delivery_mode = dest_Fixed, .int_dest_mode = (APIC_DEST_PHYSICAL != 0), .target_cpus = uv_target_cpus, @@ -433,3 +461,5 @@ void __cpuinit uv_cpu_init(void) if (get_uv_system_type() == UV_NON_UNIQUE_APIC) set_x2apic_extra_bits(uv_hub_info->pnode); } + + Index: linux-2.6/include/asm-x86/genapic_64.h =================================================================== --- linux-2.6.orig/include/asm-x86/genapic_64.h +++ linux-2.6/include/asm-x86/genapic_64.h @@ -14,6 +14,7 @@ struct genapic { char *name; + int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id); u32 int_delivery_mode; u32 int_dest_mode; int (*apic_id_registered)(void); -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists