linux-kernel - Re: PIIX4: DMA timeout issue

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Wed, 30 Jul 2008 08:58:28 +0800
From:	gshan <gshan@...atel-lucent.com>
To:	Jeff Garzik <jeff@...zik.org>
CC:	linux-kernel@...r.kernel.org,
	Linux IDE mailing list <linux-ide@...r.kernel.org>
Subject: Re: PIIX4: DMA timeout issue

Jeff Garzik wrote:
> gshan wrote:
>> Hello, I sent mails on this issue before, but nobody made response.
>> There are 2 types of board for me. The hardware configuration for
>> those 2 boards are almost same except that one of them has 100GB
>> harddisk, and another type of board has 60GB harddisk. All harddisk
>> was access through PIIX4. I found this issue on board with 60GB
>> disk, but can't reproduce it on that with 100GB disk.
>>
>> When I uncompressed a large file (600MB) to a logic partition with 8GB
>> size, following errors was report on middle way (5 minutes about from 
>> start).
>> Anybody has ideas?
>>
>> hdc: dma_timer_expiry: dma status == 0x21
>> hdc: DMA timeout error
>> hdc: dma timeout error: status=0x58 { DriveReady SeekComplete 
>> DataRequest }
>> ide: failed opcode was: unknown
>> hdc: DMA disabled
>> ide1: reset: success
>
> Can you try disabling the IDE driver (CONFIG_IDE) and enabling the 
> newer libata driver?  (CONFIG_ATA)
Jeff, thanks a lot for your suggestions. I will try it if possible.
>
>     Jeff
>
>
>
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/