--- dmesg.no_keyboard 2008-08-26 17:40:04.000000000 +0200 +++ dmesg.keyboard 2008-08-26 17:45:20.000000000 +0200 @@ -1,700 +1,706 @@ Linux version 2.6.27-rc4 (root@faramir) (gcc version 4.3.1 (Debian 4.3.1-9) ) #59 SMP Mon Aug 25 19:37:16 CEST 2008 Command line: root=/dev/mapper/main-root ro vga=791 quiet KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f674000 (usable) BIOS-e820: 000000007f674000 - 000000007f6e9000 (ACPI NVS) BIOS-e820: 000000007f6e9000 - 000000007f6ec000 (usable) BIOS-e820: 000000007f6ec000 - 000000007f6ff000 (ACPI data) BIOS-e820: 000000007f6ff000 - 000000007f700000 (usable) last_pfn = 0x7f700 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping 0000000000 - 007f600000 page 2M 007f600000 - 007f700000 page 4k kernel direct mapping tables up to 7f700000 @ 8000-c000 last_map_addr: 7f700000 end: 7f700000 RAMDISK: 37d18000 - 37fef9fa DMI 2.3 present. ACPI: RSDP 000FE020, 0014 (r0 INTEL ) ACPI: RSDT 7F6FDE48, 0058 (r1 INTEL D945GCZ FF9 MSFT 1000013) ACPI: FACP 7F6FCF10, 0074 (r1 INTEL D945GCZ FF9 MSFT 1000013) ACPI: DSDT 7F6F7010, 4348 (r1 INTEL D945GCZ FF9 MSFT 1000013) ACPI: FACS 7F6E2C40, 0040 ACPI: APIC 7F6FCE10, 0078 (r1 INTEL D945GCZ FF9 MSFT 1000013) ACPI: WDDT 7F6F6F90, 0040 (r1 INTEL D945GCZ FF9 MSFT 1000013) ACPI: MCFG 7F6F6F10, 003C (r1 INTEL D945GCZ FF9 MSFT 1000013) ACPI: ASF! 7F6FCD10, 00A6 (r32 INTEL D945GCZ FF9 MSFT 1000013) ACPI: HPET 7F6F6E90, 0038 (r1 INTEL D945GCZ FF9 MSFT 1000013) ACPI: SSDT 7F6FDC10, 01BC (r1 INTEL CpuPm FF9 MSFT 1000013) ACPI: SSDT 7F6FDA10, 0175 (r1 INTEL Cpu0Ist FF9 MSFT 1000013) ACPI: SSDT 7F6FD810, 0175 (r1 INTEL Cpu1Ist FF9 MSFT 1000013) ACPI: SSDT 7F6FD610, 0175 (r1 INTEL Cpu2Ist FF9 MSFT 1000013) ACPI: SSDT 7F6FD410, 0175 (r1 INTEL Cpu3Ist FF9 MSFT 1000013) ACPI: SSDT 7F6F6E10, 002F (r1 INTEL SetupVar FF9 MSFT 1000013) ACPI: TCPA 7F6E4D90, 0032 (r1 INTEL TIANO 2 MSFT 1000013) No NUMA configuration found Faking a node at 0000000000000000-000000007f700000 Bootmem setup node 0 0000000000000000-000000007f700000 NODE_DATA [0000000000001000 - 0000000000004fff] bootmap [000000000000a000 - 0000000000019edf] pages 10 (6 early reservations) ==> bootmem [0000000000 - 007f700000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 000074c460] TEXT DATA BSS ==> [0000200000 - 000074c460] #3 [0037d18000 - 0037fef9fa] RAMDISK ==> [0037d18000 - 0037fef9fa] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] found SMP MP-table at [ffff8800000fe680] 000fe680 [ffffe20000000000-ffffe20001ffffff] PMD -> [ffff880001200000-ffff8800031fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0007f674 0: 0x0007f6e9 -> 0x0007f6ec 0: 0x0007f6ff -> 0x0007f700 On node 0 totalpages: 521751 DMA zone: 2476 pages, LIFO batch:0 DMA32 zone: 509660 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 2 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 000000007f674000 - 000000007f6e9000 PM: Registered nosave memory: 000000007f6ec000 - 000000007f6ff000 Allocating PCI resources starting at 80000000 (gap: 7f700000:80900000) PERCPU: Allocating 47656 bytes of per cpu data NR_CPUS: 8, nr_cpu_ids: 4, nr_node_ids 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 512136 Policy zone: DMA32 Kernel command line: root=/dev/mapper/main-root ro vga=791 quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC calibrated against PM_TIMER -Detected 3199.881 MHz processor. +Detected 3199.880 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 2045508k/2087936k available (2279k kernel code, 41496k reserved, 1434k data, 368k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 hpet clockevent registered -Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.76 BogoMIPS (lpj=12799524) +Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.76 BogoMIPS (lpj=12799520) Security Framework initialized SELinux: Disabled at boot. Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. ACPI: Core revision 20080609 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Pentium(R) D CPU 3.20GHz stepping 07 Using local APIC timer interrupts. -APIC timer calibration result 12499532 +APIC timer calibration result 12499528 Detected 12.499 MHz APIC timer. Booting processor 1/1 ip 6000 Initializing CPU#1 -Calibrating delay using timer specific routine.. 6399.94 BogoMIPS (lpj=12799888) +Calibrating delay using timer specific routine.. 6399.94 BogoMIPS (lpj=12799895) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM1) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Pentium(R) D CPU 3.20GHz stepping 07 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (12799.70 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level CPU groups: 0 1 domain 1: span 0-1 level NODE groups: 0-1 CPU1 attaching sched-domain: domain 0: span 0-1 level CPU groups: 1 0 domain 1: span 0-1 level NODE groups: 0-1 net_namespace: 1552 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without MMCONFIG support. PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:01:00.0: PME# supported from D0 D3hot D3cold pci 0000:01:00.0: PME# disabled pci 0000:01:00.3: PME# supported from D0 D3hot D3cold pci 0000:01:00.3: PME# disabled pci 0000:01:00.4: PME# supported from D0 D3hot D3cold pci 0000:01:00.4: PME# disabled PCI: bridge 0000:00:1c.0 io port: [1000, 1fff] PCI: bridge 0000:00:1c.0 32bit mmio: [90000000, 901fffff] PCI: bridge 0000:00:1c.2 32bit mmio: [90300000, 903fffff] PCI: bridge 0000:00:1c.3 32bit mmio: [90400000, 904fffff] PCI: bridge 0000:00:1c.4 32bit mmio: [90500000, 905fffff] PCI: bridge 0000:00:1c.5 32bit mmio: [90600000, 906fffff] pci 0000:00:1e.0: transparent bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: parse allocated resources pnp 00:00: add io 0xcf8-0xcff flags 0x1 pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: parse allocated resources pnp 00:01: add mem 0xf0000000-0xf3ffffff flags 0x0 pnp 00:01: add mem 0xfed13000-0xfed13fff flags 0x0 pnp 00:01: add mem 0xfed14000-0xfed17fff flags 0x0 pnp 00:01: add mem 0xfed18000-0xfed18fff flags 0x0 pnp 00:01: add mem 0xfed19000-0xfed19fff flags 0x0 pnp 00:01: add mem 0xfed1c000-0xfed1ffff flags 0x0 pnp 00:01: add mem 0xfed20000-0xfed3ffff flags 0x0 pnp 00:01: add mem 0xfed45000-0xfed99fff flags 0x0 pnp 00:01: add mem 0xc0000-0xdffff flags 0x0 pnp 00:01: add mem 0xe0000-0xfffff flags 0x0 pnp 00:01: PNP0c02: calling quirk_system_pci_resources+0x0/0x179 pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: parse allocated resources pnp 00:02: add io 0x0-0xf flags 0x1 pnp 00:02: add io 0x81-0x83 flags 0x1 pnp 00:02: add io 0x87-0x87 flags 0x1 pnp 00:02: add io 0x89-0x8b flags 0x1 pnp 00:02: add io 0x8f-0x8f flags 0x1 pnp 00:02: add io 0xc0-0xdf flags 0x1 pnp 00:02: add dma 4 flags 0x0 pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:03: parse allocated resources pnp 00:03: add io 0x70-0x71 flags 0x1 pnp 00:03: add io 0x74-0x77 flags 0x1 pnp 00:03: add irq 8 flags 0x1 pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:04: parse allocated resources pnp 00:04: add io 0xf0-0xf0 flags 0x1 pnp 00:04: add irq 13 flags 0x1 pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:05: parse allocated resources pnp 00:05: add io 0x61-0x61 flags 0x1 pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: parse allocated resources pnp 00:06: add io 0x500-0x53f flags 0x1 pnp 00:06: add io 0x400-0x47f flags 0x1 pnp 00:06: add io 0x92-0x92 flags 0x1 pnp 00:06: add io 0x680-0x6ff flags 0x1 pnp 00:06: add io 0x10-0x1f flags 0x1 pnp 00:06: add io 0x72-0x73 flags 0x1 pnp 00:06: add io 0x80-0x80 flags 0x1 pnp 00:06: add io 0x84-0x86 flags 0x1 pnp 00:06: add io 0x88-0x88 flags 0x1 pnp 00:06: add io 0x8c-0x8e flags 0x1 pnp 00:06: add io 0x90-0x9f flags 0x1 pnp 00:06: PNP0c02: calling quirk_system_pci_resources+0x0/0x179 pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:07: parse allocated resources pnp 00:07: add mem 0xfed40000-0xfed44fff flags 0x0 pnp 00:07: PNP0c02: calling quirk_system_pci_resources+0x0/0x179 pnp 00:07: Plug and Play ACPI device, IDs PNP0c31 PNP0c02 (active) pnp 00:08: parse allocated resources pnp 00:08: add io 0x60-0x60 flags 0x1 pnp 00:08: add io 0x64-0x64 flags 0x1 pnp 00:08: PNP0c02: calling quirk_system_pci_resources+0x0/0x179 pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:09: parse allocated resources pnp 00:09: add io 0x3f0-0x3f5 flags 0x1 pnp 00:09: add io 0x3f0-0x3f0 flags 0x1 pnp 00:09: add irq 6 flags 0x1 pnp 00:09: add dma 2 flags 0x0 pnp 00:09: parse resource options pnp 00:09: dependent set 0 (preferred) io min 0x3f0 max 0x3f0 align 1 size 6 flags 0x1 pnp 00:09: dependent set 0 (preferred) io min 0x3f7 max 0x3f7 align 1 size 1 flags 0x1 pnp 00:09: dependent set 0 (preferred) irq 6 flags 0x1 pnp 00:09: dependent set 0 (preferred) dma 2 (bitmask 0x4) flags 0x0 pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active) pnp 00:0a: parse allocated resources pnp 00:0a: add io 0x378-0x37f flags 0x1 pnp 00:0a: add io 0x778-0x77f flags 0x1 pnp 00:0a: add irq 7 flags 0x1 pnp 00:0a: add dma 0 flags 0x10000000 pnp 00:0a: parse resource options pnp 00:0a: dependent set 0 (preferred) io min 0x378 max 0x378 align 1 size 8 flags 0x1 pnp 00:0a: dependent set 0 (preferred) io min 0x778 max 0x778 align 1 size 8 flags 0x1 pnp 00:0a: dependent set 0 (preferred) irq 5 7 flags 0x1 pnp 00:0a: dependent set 0 (preferred) dma 1 3 (bitmask 0xa) flags 0x0 pnp 00:0a: dependent set 1 (preferred) io min 0x278 max 0x278 align 1 size 8 flags 0x1 pnp 00:0a: dependent set 1 (preferred) io min 0x678 max 0x678 align 1 size 8 flags 0x1 pnp 00:0a: dependent set 1 (preferred) irq 5 7 flags 0x1 pnp 00:0a: dependent set 1 (preferred) dma 1 3 (bitmask 0xa) flags 0x0 pnp 00:0a: dependent set 2 (preferred) io min 0x3bc max 0x3bc align 1 size 4 flags 0x1 pnp 00:0a: dependent set 2 (preferred) io min 0x7bc max 0x7bc align 1 size 4 flags 0x1 pnp 00:0a: dependent set 2 (preferred) irq 5 7 flags 0x1 pnp 00:0a: dependent set 2 (preferred) dma 1 3 (bitmask 0xa) flags 0x0 pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active) pnp 00:0b: parse allocated resources pnp 00:0b: add io 0x3f8-0x3ff flags 0x1 pnp 00:0b: add irq 4 flags 0x1 pnp 00:0b: parse resource options pnp 00:0b: dependent set 0 (preferred) io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1 pnp 00:0b: dependent set 0 (preferred) irq 4 flags 0x1 pnp 00:0b: dependent set 1 (preferred) io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1 pnp 00:0b: dependent set 1 (preferred) irq 4 flags 0x1 pnp 00:0b: dependent set 2 (preferred) io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1 pnp 00:0b: dependent set 2 (preferred) irq 3 flags 0x1 pnp 00:0b: dependent set 3 (preferred) io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1 pnp 00:0b: dependent set 3 (preferred) irq 3 flags 0x1 pnp 00:0b: dependent set 4 (functional) io min 0x100 max 0x3f8 align 8 size 8 flags 0x1 pnp 00:0b: dependent set 4 (functional) irq 1 3 4 5 6 7 8 10 11 12 13 14 15 flags 0x1 pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:0c: parse allocated resources pnp 00:0c: add mem 0xfec00000-0xfec000ff flags 0x0 pnp 00:0c: Plug and Play ACPI device, IDs PNP0003 (active) pnp 00:0d: parse allocated resources pnp 00:0d: add mem 0xfed00000-0xfed003ff flags 0x0 pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active) pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 pnp: the driver 'system' has been registered system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved system 00:01: iomem range 0xc0000-0xdffff has been reserved system 00:01: iomem range 0xe0000-0xfffff could not be reserved system 00:01: driver attached system 00:06: ioport range 0x500-0x53f has been reserved system 00:06: ioport range 0x400-0x47f has been reserved system 00:06: ioport range 0x680-0x6ff has been reserved system 00:06: driver attached system 00:07: iomem range 0xfed40000-0xfed44fff has been reserved system 00:07: driver attached system 00:08: driver attached pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1c.0: IO window: 0x1000-0x1fff pci 0000:00:1c.0: MEM window: 0x90000000-0x901fffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.2: IO window: disabled pci 0000:00:1c.2: MEM window: 0x90300000-0x903fffff pci 0000:00:1c.2: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.3: IO window: disabled pci 0000:00:1c.3: MEM window: 0x90400000-0x904fffff pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: MEM window: 0x90500000-0x905fffff pci 0000:00:1c.4: PREFETCH window: disabled pci 0000:00:1c.5: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.5: IO window: disabled pci 0000:00:1c.5: MEM window: 0x90600000-0x906fffff pci 0000:00:1c.5: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [1000, 1fff] bus: 01 index 1 mmio: [90000000, 901fffff] bus: 01 index 2 mmio: [0, 0] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 mmio: [0, 0] bus: 02 index 1 mmio: [90300000, 903fffff] bus: 02 index 2 mmio: [0, 0] bus: 02 index 3 mmio: [0, 0] bus: 03 index 0 mmio: [0, 0] bus: 03 index 1 mmio: [90400000, 904fffff] bus: 03 index 2 mmio: [0, 0] bus: 03 index 3 mmio: [0, 0] bus: 04 index 0 mmio: [0, 0] bus: 04 index 1 mmio: [90500000, 905fffff] bus: 04 index 2 mmio: [0, 0] bus: 04 index 3 mmio: [0, 0] bus: 05 index 0 mmio: [0, 0] bus: 05 index 1 mmio: [90600000, 906fffff] bus: 05 index 2 mmio: [0, 0] bus: 05 index 3 mmio: [0, 0] bus: 06 index 0 mmio: [0, 0] bus: 06 index 1 mmio: [0, 0] bus: 06 index 2 mmio: [0, 0] bus: 06 index 3 io port: [0, ffff] bus: 06 index 4 mmio: [0, ffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 Freeing initrd memory: 2910k freed audit: initializing netlink socket (disabled) -type=2000 audit(1219765030.524:1): initialized +type=2000 audit(1219765299.516:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 4000 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pcieport-driver 0000:00:1c.2: setting latency timer to 64 pcieport-driver 0000:00:1c.2: found MSI capability pci_express 0000:00:1c.2:pcie00: allocate port service pci_express 0000:00:1c.2:pcie02: allocate port service pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.3: found MSI capability pci_express 0000:00:1c.3:pcie00: allocate port service pci_express 0000:00:1c.3:pcie02: allocate port service pcieport-driver 0000:00:1c.4: setting latency timer to 64 pcieport-driver 0000:00:1c.4: found MSI capability pci_express 0000:00:1c.4:pcie00: allocate port service pci_express 0000:00:1c.4:pcie02: allocate port service pcieport-driver 0000:00:1c.5: setting latency timer to 64 pcieport-driver 0000:00:1c.5: found MSI capability pci_express 0000:00:1c.5:pcie00: allocate port service pci_express 0000:00:1c.5:pcie02: allocate port service vesafb: framebuffer at 0x80000000, mapped to 0xffffc20000a00000, using 3072k, total 7872k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.103 Serial: 8250/16550 driver4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A pnp: the driver 'serial' has been registered 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial 00:0b: driver attached serial 0000:01:00.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 0000:01:00.3: ttyS1 at I/O 0x1020 (irq = 18) is a 16550A brd: module loaded pnp: the driver 'i8042 kbd' has been registered pnp: the driver 'i8042 aux' has been registered pnp: the driver 'i8042 kbd' has been unregistered pnp: the driver 'i8042 aux' has been unregistered PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice pnp: the driver 'rtc_cmos' has been registered rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, hpet irqs rtc_cmos 00:03: driver attached cpuidle: using governor ladder cpuidle: using governor menu TCP bic registered NET: Registered protocol family 17 -rtc_cmos 00:03: setting system clock to 2008-08-26 15:37:11 UTC (1219765031) +rtc_cmos 00:03: setting system clock to 2008-08-26 15:41:40 UTC (1219765300) Freeing unused kernel memory: 368k freed No dock devices found. SCSI subsystem initialized libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0x902c4000 port 0x902c4100 irq 506 ata2: SATA max UDMA/133 abar m1024@0x902c4000 port 0x902c4180 irq 506 ata3: SATA max UDMA/133 abar m1024@0x902c4000 port 0x902c4200 irq 506 ata4: SATA max UDMA/133 abar m1024@0x902c4000 port 0x902c4280 irq 506 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: HDT722516DLA380, V43OA96A, max UDMA/133 ata1.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATAPI: Optiarc DVD RW AD-7170S, 1.00, max UDMA/66 ata3.00: configured for UDMA/66 ata4: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA HDT722516DLA380 V43O PQ: 0 ANSI: 5 scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7170S 1.00 PQ: 0 ANSI: 5 processor ACPI0007:00: registered as cooling_device0 processor ACPI0007:01: registered as cooling_device1 Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors (164697 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 > sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. udevd version 125 started +Driver 'sr' needs updating - please use bus_type methods +sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray +Uniform CD-ROM driver Revision: 3.20 +sr 2:0:0:0: Attached scsi CD-ROM sr0 agpgart-intel 0000:00:00.0: Intel 945G Chipset agpgart-intel 0000:00:00.0: detected 7932K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000 -input: PC Speaker as /class/input/input0 USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002080 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected -iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) -iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) -iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) -input: Power Button (FF) as /class/input/input1 -ACPI: Power Button (FF) [PWRF] -input: Sleep Button (CM) as /class/input/input2 +e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2 +e1000e: Copyright (c) 1999-2008 Intel Corporation. +Uniform Multi-Platform E-IDE driver Floppy drive(s): fd0 is 1.44M -ACPI: Sleep Button (CM) [SLPB] -FDC 0 is a post-1991 82077 -intel_rng: Firmware space is locked read-only. If you can't or -intel_rng: don't want to disable this in firmware setup, and if -intel_rng: you are certain that your system has a functional -intel_rng: RNG, try using the 'no_fwh_detect' option. uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected +FDC 0 is a post-1991 82077 +iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) +iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) +iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) +input: Power Button (FF) as /class/input/input0 +input: PC Speaker as /class/input/input1 +ACPI: Power Button (FF) [PWRF] +input: Sleep Button (CM) as /class/input/input2 pnp: the driver 'parport_pc' has been registered parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] -Uniform Multi-Platform E-IDE driver -Driver 'sr' needs updating - please use bus_type methods -sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray -Uniform CD-ROM driver Revision: 3.20 -sr 2:0:0:0: Attached scsi CD-ROM sr0 -parport0: Printer, HEWLETT-PACKARD PHOTOSMART P1100 -parport_pc 00:0a: driver attached +intel_rng: Firmware space is locked read-only. If you can't or +intel_rng: don't want to disable this in firmware setup, and if +intel_rng: you are certain that your system has a functional +intel_rng: RNG, try using the 'no_fwh_detect' option. uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected -e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2 -e1000e: Copyright (c) 1999-2008 Intel Corporation. +ACPI: Sleep Button (CM) [SLPB] sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 2:0:0:0: Attached scsi generic sg1 type 5 +parport0: Printer, HEWLETT-PACKARD PHOTOSMART P1100 +parport_pc 00:0a: driver attached uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 3-1: new low speed USB device using uhci_hcd and address 2 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 usb 3-1: configuration #1 chosen from 1 choice ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0x902c4400 usb 4-1: new low speed USB device using uhci_hcd and address 2 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected hub 4-0:1.0: unable to enumerate USB device on port 1 +usb 3-1: USB disconnect, address 2 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x01) PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 piix 0000:00:1f.1: IDE port disabled piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x20b0-0x20b7 Probing IDE interface ide0... -usb 3-1: reset low speed USB device using uhci_hcd and address 2 +usb 3-1: new low speed USB device using uhci_hcd and address 3 +usb 3-1: configuration #1 chosen from 1 choice +input: USB Compliant Keyboard as /class/input/input3 +input: USB HID v1.10 Keyboard [USB Compliant Keyboard] on usb-0000:00:1d.2-1 +input: USB Compliant Keyboard as /class/input/input4 +input: USB HID v1.10 Device [USB Compliant Keyboard] on usb-0000:00:1d.2-1 hda: LITE-ON DVD SOHD-16P9SV, ATAPI CD/DVD-ROM drive usb 4-1: new low speed USB device using uhci_hcd and address 3 usb 4-1: configuration #1 chosen from 1 choice -input: Logitech USB Receiver as /class/input/input3 +input: Logitech USB Receiver as /class/input/input5 input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-1 hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 -i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 e1000e 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 e1000e 0000:01:00.0: setting latency timer to 64 +i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 e1000e 0000:01:00.0: Warning: detected DSPD enabled in EEPROM 0000:01:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:76:04:ff:09 0000:01:00.0: eth0: Intel(R) PRO/1000 Network Connection 0000:01:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff hda: ATAPI 48X DVD-ROM drive, 254kB Cache Adding 979924k swap on /dev/sda6. Priority:-1 extents:1 across:979924k EXT3 FS on dm-0, internal journal NET: Registered protocol family 10 lo: Disabled Privacy Extensions i2c-adapter i2c-0: lm85: Detected SMSC chip i2c-adapter i2c-0: lm85: Unrecognized version/stepping 0x68 Defaulting to Generic LM85. fuse init (API version 7.9) kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-4, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-5, internal journal EXT3-fs: mounted filesystem with ordered data mode. Bridge firewalling registered br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. device eth0 entered promiscuous mode ADDRCONF(NETDEV_UP): eth0: link is not ready 0000:01:00.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX 0000:01:00.0: eth0: 10/100 speed: disabling TSO ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready br0: port 1(eth0) entering learning state br0: topology change detected, propagating br0: port 1(eth0) entering forwarding state RPC: Registered udp transport module. RPC: Registered tcp transport module. br0: no IPv6 routers present -eth0: no IPv6 routers present lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver +eth0: no IPv6 routers present tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky device vbox0 entered promiscuous mode br0: port 2(vbox0) entering learning state br0: topology change detected, propagating br0: port 2(vbox0) entering forwarding state [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20060119 on minor 0 vbox0: no IPv6 routers present