| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 7 Sep 2008 17:58:56 -0700
From: Yinghai Lu <yhlu.kernel@...il.com>
To: Ingo Molnar <mingo@...e.hu>, Thomas Gleixner <tglx@...utronix.de>,
"H. Peter Anvin" <hpa@...or.com>,
Andrew Morton <akpm@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org, Yinghai Lu <yhlu.kernel@...il.com>
Subject: [PATCH 7/9] x86: make 64 bit to use amd.c
Signed-off-by: Yinghai Lu <yhlu.kernel@...il.com>
---
arch/x86/Kconfig.cpu | 10 +-
arch/x86/kernel/cpu/Makefile | 3 +-
arch/x86/kernel/cpu/amd_64.c | 473 ------------------------------------------
3 files changed, 2 insertions(+), 484 deletions(-)
delete mode 100644 arch/x86/kernel/cpu/amd_64.c
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 331922c..dd8a937 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -462,17 +462,9 @@ config CPU_SUP_CYRIX_32
help
This enables extended support for Cyrix processors
-config CPU_SUP_AMD_32
+config CPU_SUP_AMD
default y
bool "Support AMD processors" if PROCESSOR_SELECT
- depends on !64BIT
- help
- This enables extended support for AMD processors
-
-config CPU_SUP_AMD_64
- default y
- bool "Support AMD processors" if PROCESSOR_SELECT
- depends on 64BIT
help
This enables extended support for AMD processors
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index d031f24..510d1bc 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -10,8 +10,7 @@ obj-$(CONFIG_X86_64) += bugs_64.o
obj-$(CONFIG_CPU_SUP_INTEL_32) += intel.o
obj-$(CONFIG_CPU_SUP_INTEL_64) += intel_64.o
-obj-$(CONFIG_CPU_SUP_AMD_32) += amd.o
-obj-$(CONFIG_CPU_SUP_AMD_64) += amd_64.o
+obj-$(CONFIG_CPU_SUP_AMD) += amd.o
obj-$(CONFIG_CPU_SUP_CYRIX_32) += cyrix.o
obj-$(CONFIG_CPU_SUP_CENTAUR_32) += centaur.o
obj-$(CONFIG_CPU_SUP_CENTAUR_64) += centaur_64.o
diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c
deleted file mode 100644
index 32e7352..0000000
--- a/arch/x86/kernel/cpu/amd_64.c
+++ /dev/null
@@ -1,473 +0,0 @@
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/mm.h>
-
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/apic.h>
-
-#ifdef CONFIG_X86_64
-# include <asm/numa_64.h>
-# include <asm/mmconfig.h>
-# include <asm/cacheflush.h>
-#endif
-
-#include <mach_apic.h>
-
-#include "cpu.h"
-
-#ifdef CONFIG_X86_32
-/*
- * B step AMD K6 before B 9730xxxx have hardware bugs that can cause
- * misexecution of code under Linux. Owners of such processors should
- * contact AMD for precise details and a CPU swap.
- *
- * See http://www.multimania.com/poulot/k6bug.html
- * http://www.amd.com/K6/k6docs/revgd.html
- *
- * The following test is erm.. interesting. AMD neglected to up
- * the chip setting when fixing the bug but they also tweaked some
- * performance at the same time..
- */
-
-extern void vide(void);
-__asm__(".align 4\nvide: ret");
-
-static void __cpuinit init_amd_k5(struct cpuinfo_x86 *c)
-{
-/*
- * General Systems BIOSen alias the cpu frequency registers
- * of the Elan at 0x000df000. Unfortuantly, one of the Linux
- * drivers subsequently pokes it, and changes the CPU speed.
- * Workaround : Remove the unneeded alias.
- */
-#define CBAR (0xfffc) /* Configuration Base Address (32-bit) */
-#define CBAR_ENB (0x80000000)
-#define CBAR_KEY (0X000000CB)
- if (c->x86_model == 9 || c->x86_model == 10) {
- if (inl (CBAR) & CBAR_ENB)
- outl (0 | CBAR_KEY, CBAR);
- }
-}
-
-
-static void __cpuinit init_amd_k6(struct cpuinfo_x86 *c)
-{
- u32 l, h;
- int mbytes = num_physpages >> (20-PAGE_SHIFT);
-
- if (c->x86_model < 6) {
- /* Based on AMD doc 20734R - June 2000 */
- if (c->x86_model == 0) {
- clear_cpu_cap(c, X86_FEATURE_APIC);
- set_cpu_cap(c, X86_FEATURE_PGE);
- }
- return;
- }
-
- if (c->x86_model == 6 && c->x86_mask == 1) {
- const int K6_BUG_LOOP = 1000000;
- int n;
- void (*f_vide)(void);
- unsigned long d, d2;
-
- printk(KERN_INFO "AMD K6 stepping B detected - ");
-
- /*
- * It looks like AMD fixed the 2.6.2 bug and improved indirect
- * calls at the same time.
- */
-
- n = K6_BUG_LOOP;
- f_vide = vide;
- rdtscl(d);
- while (n--)
- f_vide();
- rdtscl(d2);
- d = d2-d;
-
- if (d > 20*K6_BUG_LOOP)
- printk("system stability may be impaired when more than 32 MB are used.\n");
- else
- printk("probably OK (after B9730xxxx).\n");
- printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n");
- }
-
- /* K6 with old style WHCR */
- if (c->x86_model < 8 ||
- (c->x86_model == 8 && c->x86_mask < 8)) {
- /* We can only write allocate on the low 508Mb */
- if (mbytes > 508)
- mbytes = 508;
-
- rdmsr(MSR_K6_WHCR, l, h);
- if ((l&0x0000FFFF) == 0) {
- unsigned long flags;
- l = (1<<0)|((mbytes/4)<<1);
- local_irq_save(flags);
- wbinvd();
- wrmsr(MSR_K6_WHCR, l, h);
- local_irq_restore(flags);
- printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n",
- mbytes);
- }
- return;
- }
-
- if ((c->x86_model == 8 && c->x86_mask > 7) ||
- c->x86_model == 9 || c->x86_model == 13) {
- /* The more serious chips .. */
-
- if (mbytes > 4092)
- mbytes = 4092;
-
- rdmsr(MSR_K6_WHCR, l, h);
- if ((l&0xFFFF0000) == 0) {
- unsigned long flags;
- l = ((mbytes>>2)<<22)|(1<<16);
- local_irq_save(flags);
- wbinvd();
- wrmsr(MSR_K6_WHCR, l, h);
- local_irq_restore(flags);
- printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n",
- mbytes);
- }
-
- return;
- }
-
- if (c->x86_model == 10) {
- /* AMD Geode LX is model 10 */
- /* placeholder for any needed mods */
- return;
- }
-}
-
-static void __cpuinit init_amd_k7(struct cpuinfo_x86 *c)
-{
- u32 l, h;
-
- /*
- * Bit 15 of Athlon specific MSR 15, needs to be 0
- * to enable SSE on Palomino/Morgan/Barton CPU's.
- * If the BIOS didn't enable it already, enable it here.
- */
- if (c->x86_model >= 6 && c->x86_model <= 10) {
- if (!cpu_has(c, X86_FEATURE_XMM)) {
- printk(KERN_INFO "Enabling disabled K7/SSE Support.\n");
- rdmsr(MSR_K7_HWCR, l, h);
- l &= ~0x00008000;
- wrmsr(MSR_K7_HWCR, l, h);
- set_cpu_cap(c, X86_FEATURE_XMM);
- }
- }
-
- /*
- * It's been determined by AMD that Athlons since model 8 stepping 1
- * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
- * As per AMD technical note 27212 0.2
- */
- if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) {
- rdmsr(MSR_K7_CLK_CTL, l, h);
- if ((l & 0xfff00000) != 0x20000000) {
- printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l,
- ((l & 0x000fffff)|0x20000000));
- wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h);
- }
- }
-
- set_cpu_cap(c, X86_FEATURE_K7);
-}
-#endif
-
-#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
-static int __cpuinit nearby_node(int apicid)
-{
- int i, node;
-
- for (i = apicid - 1; i >= 0; i--) {
- node = apicid_to_node[i];
- if (node != NUMA_NO_NODE && node_online(node))
- return node;
- }
- for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
- node = apicid_to_node[i];
- if (node != NUMA_NO_NODE && node_online(node))
- return node;
- }
- return first_node(node_online_map); /* Shouldn't happen */
-}
-#endif
-
-/*
- * On a AMD dual core setup the lower bits of the APIC id distingush the cores.
- * Assumes number of cores is a power of two.
- */
-static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_X86_HT
- unsigned bits;
-
- bits = c->x86_coreid_bits;
-
- /* Low order bits define the core id (index of core in socket) */
- c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
- /* Convert the initial APIC ID into the socket ID */
- c->phys_proc_id = c->initial_apicid >> bits;
-#endif
-}
-
-static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
-{
-#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
- int cpu = smp_processor_id();
- int node;
- unsigned apicid = hard_smp_processor_id();
-
- node = c->phys_proc_id;
- if (apicid_to_node[apicid] != NUMA_NO_NODE)
- node = apicid_to_node[apicid];
- if (!node_online(node)) {
- /* Two possibilities here:
- - The CPU is missing memory and no node was created.
- In that case try picking one from a nearby CPU
- - The APIC IDs differ from the HyperTransport node IDs
- which the K8 northbridge parsing fills in.
- Assume they are all increased by a constant offset,
- but in the same order as the HT nodeids.
- If that doesn't result in a usable node fall back to the
- path for the previous case. */
-
- int ht_nodeid = c->initial_apicid;
-
- if (ht_nodeid >= 0 &&
- apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
- node = apicid_to_node[ht_nodeid];
- /* Pick a nearby node */
- if (!node_online(node))
- node = nearby_node(apicid);
- }
- numa_set_node(cpu, node);
-
- printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
-#endif
-}
-
-static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_X86_HT
- unsigned bits, ecx;
-
- /* Multi core CPU? */
- if (c->extended_cpuid_level < 0x80000008)
- return;
-
- ecx = cpuid_ecx(0x80000008);
-
- c->x86_max_cores = (ecx & 0xff) + 1;
-
- /* CPU telling us the core id bits shift? */
- bits = (ecx >> 12) & 0xF;
-
- /* Otherwise recompute */
- if (bits == 0) {
- while ((1 << bits) < c->x86_max_cores)
- bits++;
- }
-
- c->x86_coreid_bits = bits;
-#endif
-}
-
-static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
-{
- early_init_amd_mc(c);
-
- /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */
- if (c->x86_power & (1<<8))
- set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
-
-#ifdef CONFIG_X86_64
- set_cpu_cap(c, X86_FEATURE_SYSCALL32);
-#else
- /* Set MTRR capability flag if appropriate */
- if (c->x86 == 5)
- if (c->x86_model == 13 || c->x86_model == 9 ||
- (c->x86_model == 8 && c->x86_mask >= 8))
- set_cpu_cap(c, X86_FEATURE_K6_MTRR);
-#endif
-}
-
-static void __cpuinit init_amd(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
- unsigned long long value;
-
- /*
- * Disable TLB flush filter by setting HWCR.FFDIS on K8
- * bit 6 of msr C001_0015
- *
- * Errata 63 for SH-B3 steppings
- * Errata 122 for all steppings (F+ have it disabled by default)
- */
- if (c->x86 == 0xf) {
- rdmsrl(MSR_K7_HWCR, value);
- value |= 1 << 6;
- wrmsrl(MSR_K7_HWCR, value);
- }
-#endif
-
- early_init_amd(c);
-
- /*
- * Bit 31 in normal CPUID used for nonstandard 3DNow ID;
- * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway
- */
- clear_cpu_cap(c, 0*32+31);
-
-#ifdef CONFIG_X86_64
- /* On C+ stepping K8 rep microcode works well for copy/memset */
- if (c->x86 == 0xf) {
- u32 level;
-
- level = cpuid_eax(1);
- if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
- set_cpu_cap(c, X86_FEATURE_REP_GOOD);
- }
- if (c->x86 == 0x10 || c->x86 == 0x11)
- set_cpu_cap(c, X86_FEATURE_REP_GOOD);
-#else
-
- /*
- * FIXME: We should handle the K5 here. Set up the write
- * range and also turn on MSR 83 bits 4 and 31 (write alloc,
- * no bus pipeline)
- */
-
- switch (c->x86) {
- case 4:
- init_amd_k5(c);
- break;
- case 5:
- init_amd_k6(c);
- break;
- case 6: /* An Athlon/Duron */
- init_amd_k7(c);
- break;
- }
-
- /* K6s reports MCEs but don't actually have all the MSRs */
- if (c->x86 < 6)
- clear_cpu_cap(c, X86_FEATURE_MCE);
-#endif
-
- /* Enable workaround for FXSAVE leak */
- if (c->x86 >= 6)
- set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK);
-
- if (!c->x86_model_id[0]) {
- switch (c->x86) {
- case 0xf:
- /* Should distinguish Models here, but this is only
- a fallback anyways. */
- strcpy(c->x86_model_id, "Hammer");
- break;
- }
- }
-
- display_cacheinfo(c);
-
- /* Multi core CPU? */
- if (c->extended_cpuid_level >= 0x80000008) {
- amd_detect_cmp(c);
- srat_detect_node(c);
- }
-
-#ifdef CONFIG_X86_32
- detect_ht(c);
-#endif
-
- if (c->extended_cpuid_level >= 0x80000006) {
- if ((c->x86 >= 0x0f) && (cpuid_edx(0x80000006) & 0xf000))
- num_cache_leaves = 4;
- else
- num_cache_leaves = 3;
- }
-
- if (c->x86 >= 0xf && c->x86 <= 0x11)
- set_cpu_cap(c, X86_FEATURE_K8);
-
- if (cpu_has_xmm2) {
- /* MFENCE stops RDTSC speculation */
- set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
- }
-
-#ifdef CONFIG_X86_64
- if (c->x86 == 0x10) {
- /* do this for boot cpu */
- if (c == &boot_cpu_data)
- check_enable_amd_mmconf_dmi();
-
- fam10h_check_enable_mmcfg();
- }
-
- if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) {
- unsigned long long tseg;
-
- /*
- * Split up direct mapping around the TSEG SMM area.
- * Don't do it for gbpages because there seems very little
- * benefit in doing so.
- */
- if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) {
- printk(KERN_DEBUG "tseg: %010llx\n", tseg);
- if ((tseg>>PMD_SHIFT) <
- (max_low_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) ||
- ((tseg>>PMD_SHIFT) <
- (max_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) &&
- (tseg>>PMD_SHIFT) >= (1ULL<<(32 - PMD_SHIFT))))
- set_memory_4k((unsigned long)__va(tseg), 1);
- }
- }
-#endif
-}
-
-#ifdef CONFIG_X86_32
-static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int size)
-{
- /* AMD errata T13 (order #21922) */
- if ((c->x86 == 6)) {
- if (c->x86_model == 3 && c->x86_mask == 0) /* Duron Rev A0 */
- size = 64;
- if (c->x86_model == 4 &&
- (c->x86_mask == 0 || c->x86_mask == 1)) /* Tbird rev A1/A2 */
- size = 256;
- }
- return size;
-}
-#endif
-
-static struct cpu_dev amd_cpu_dev __cpuinitdata = {
- .c_vendor = "AMD",
- .c_ident = { "AuthenticAMD" },
-#ifdef CONFIG_X86_32
- .c_models = {
- { .vendor = X86_VENDOR_AMD, .family = 4, .model_names =
- {
- [3] = "486 DX/2",
- [7] = "486 DX/2-WB",
- [8] = "486 DX/4",
- [9] = "486 DX/4-WB",
- [14] = "Am5x86-WT",
- [15] = "Am5x86-WB"
- }
- },
- },
- .c_size_cache = amd_size_cache,
-#endif
- .c_early_init = early_init_amd,
- .c_init = init_amd,
- .c_x86_vendor = X86_VENDOR_AMD,
-};
-
-cpu_dev_register(amd_cpu_dev);
--
1.5.4.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists