| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 16 Sep 2008 22:09:20 +0100
From: Matthew Garrett <mjg59@...f.ucam.org>
To: Larry Finger <Larry.Finger@...inger.net>
Cc: Michael Buesch <mb@...sch.de>,
Adel Gadllah <adel.gadllah@...il.com>,
LKML <linux-kernel@...r.kernel.org>,
wireless <linux-wireless@...r.kernel.org>,
bcm43xx-dev@...ts.berlios.de
Subject: Re: Regression in 2.6.27-rcX caused by commit bc19d6e0b74ef03a3baf035412c95192b54dfc6f
Oh, hey, I suck. This one might stand a better chance of not falling
over.
diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c
index fec5645..991e318 100644
--- a/drivers/net/wireless/b43/rfkill.c
+++ b/drivers/net/wireless/b43/rfkill.c
@@ -49,21 +49,18 @@ static void b43_rfkill_update_state(struct b43_wldev *dev)
struct b43_rfkill *rfk = &(dev->wl->rfkill);
if (!dev->radio_hw_enable) {
- rfk->rfkill->state = RFKILL_STATE_HARD_BLOCKED;
+ rfkill_force_state(rfk->rfkill, RFKILL_STATE_HARD_BLOCKED);
return;
}
if (!dev->phy.radio_on)
- rfk->rfkill->state = RFKILL_STATE_SOFT_BLOCKED;
+ rfkill_force_state(rfk->rfkill, RFKILL_STATE_SOFT_BLOCKED);
else
- rfk->rfkill->state = RFKILL_STATE_UNBLOCKED;
-
+ rfkill_force_state(rfk->rfkill, RFKILL_STATE_UNBLOCKED);
}
-/* The poll callback for the hardware button. */
-static void b43_rfkill_poll(struct input_polled_dev *poll_dev)
+static void b43_rfkill_update(struct b43_wldev *dev)
{
- struct b43_wldev *dev = poll_dev->private;
struct b43_wl *wl = dev->wl;
bool enabled;
bool report_change = 0;
@@ -82,13 +79,25 @@ static void b43_rfkill_poll(struct input_polled_dev *poll_dev)
enabled ? "ENABLED" : "DISABLED");
}
mutex_unlock(&wl->mutex);
+}
- /* send the radio switch event to the system - note both a key press
- * and a release are required */
- if (unlikely(report_change)) {
- input_report_key(poll_dev->input, KEY_WLAN, 1);
- input_report_key(poll_dev->input, KEY_WLAN, 0);
- }
+static void b43_rfkill_poll(unsigned long data)
+{
+ struct b43_rfkill *rfkill = (struct b43_rfkill *)data;
+ schedule_work(&rfkill->poll_queue);
+}
+
+static void b43_rfkill_work(struct work_struct *work)
+{
+ struct b43_rfkill *rfk = container_of(work, struct b43_rfkill,
+ poll_queue);
+ struct b43_wl *wl = container_of(rfk, struct b43_wl, rfkill);
+ struct b43_wldev *dev = wl->current_dev;
+
+ b43_rfkill_update(dev);
+ rfk->poll_timer.function = b43_rfkill_poll;
+ rfk->poll_timer.expires = round_jiffies(jiffies + HZ);
+ add_timer(&rfk->poll_timer);
}
/* Called when the RFKILL toggled in software. */
@@ -158,48 +167,23 @@ void b43_rfkill_init(struct b43_wldev *dev)
rfk->rfkill->toggle_radio = b43_rfkill_soft_toggle;
rfk->rfkill->user_claim_unsupported = 1;
- rfk->poll_dev = input_allocate_polled_device();
- if (!rfk->poll_dev) {
- rfkill_free(rfk->rfkill);
- goto err_freed_rfk;
- }
-
- rfk->poll_dev->private = dev;
- rfk->poll_dev->poll = b43_rfkill_poll;
- rfk->poll_dev->poll_interval = 1000; /* msecs */
-
- rfk->poll_dev->input->name = rfk->name;
- rfk->poll_dev->input->id.bustype = BUS_HOST;
- rfk->poll_dev->input->id.vendor = dev->dev->bus->boardinfo.vendor;
- rfk->poll_dev->input->evbit[0] = BIT(EV_KEY);
- set_bit(KEY_WLAN, rfk->poll_dev->input->keybit);
-
err = rfkill_register(rfk->rfkill);
if (err)
- goto err_free_polldev;
+ goto err_free_rfk;
-#ifdef CONFIG_RFKILL_INPUT_MODULE
- /* B43 RF-kill isn't useful without the rfkill-input subsystem.
- * Try to load the module. */
- err = request_module("rfkill-input");
- if (err)
- b43warn(wl, "Failed to load the rfkill-input module. "
- "The built-in radio LED will not work.\n");
-#endif /* CONFIG_RFKILL_INPUT */
+ rfk->registered = 1;
- err = input_register_polled_device(rfk->poll_dev);
- if (err)
- goto err_unreg_rfk;
+ INIT_WORK(&rfk->poll_queue, b43_rfkill_work);
- rfk->registered = 1;
+ init_timer(&rfk->poll_timer);
+ rfk->poll_timer.function = b43_rfkill_poll;
+ rfk->poll_timer.expires = round_jiffies(jiffies + HZ);
+ rfk->poll_timer.data = (unsigned long)rfk;
+ add_timer(&rfk->poll_timer);
return;
-err_unreg_rfk:
- rfkill_unregister(rfk->rfkill);
-err_free_polldev:
- input_free_polled_device(rfk->poll_dev);
- rfk->poll_dev = NULL;
-err_freed_rfk:
+err_free_rfk:
+ rfkill_free(rfk->rfkill);
rfk->rfkill = NULL;
out_error:
rfk->registered = 0;
@@ -214,9 +198,8 @@ void b43_rfkill_exit(struct b43_wldev *dev)
return;
rfk->registered = 0;
- input_unregister_polled_device(rfk->poll_dev);
+ del_timer(&rfk->poll_timer);
+
rfkill_unregister(rfk->rfkill);
- input_free_polled_device(rfk->poll_dev);
- rfk->poll_dev = NULL;
rfk->rfkill = NULL;
}
diff --git a/drivers/net/wireless/b43/rfkill.h b/drivers/net/wireless/b43/rfkill.h
index adacf93..1a4a719 100644
--- a/drivers/net/wireless/b43/rfkill.h
+++ b/drivers/net/wireless/b43/rfkill.h
@@ -7,14 +7,14 @@ struct b43_wldev;
#ifdef CONFIG_B43_RFKILL
#include <linux/rfkill.h>
-#include <linux/input-polldev.h>
-
struct b43_rfkill {
/* The RFKILL subsystem data structure */
struct rfkill *rfkill;
- /* The poll device for the RFKILL input button */
- struct input_polled_dev *poll_dev;
+ /* The timer list for the RFKILL polling */
+ struct timer_list poll_timer;
+ /* Workqueue for the RFKILL polling */
+ struct work_struct poll_queue;
/* Did initialization succeed? Used for freeing. */
bool registered;
/* The unique name of this rfkill switch */
--
Matthew Garrett | mjg59@...f.ucam.org
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists