| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 29 Oct 2008 20:10:10 +0200 (EET)
From: Pekka J Enberg <penberg@...helsinki.fi>
To: Greg Kroah-Hartman <greg@...ah.com>
cc: Pavel Machek <pavel@...e.cz>, linux-kernel@...r.kernel.org
Subject: [PATCH 1/6] w35und: remove timer wrappers
From: Pekka Enberg <penberg@...helsinki.fi>
This patch removes the OS_TIMER and related wrappers from driver code. The
patch also changes the code to use msecs_to_jiffies() for setting up
timer->expires.
Cc: Pavel Machek <pavel@...e.cz>
Signed-off-by: Pekka Enberg <penberg@...helsinki.fi>
---
drivers/staging/winbond/bssdscpt.h | 2 +-
drivers/staging/winbond/linux/common.h | 19 -
drivers/staging/winbond/mds_f.h | 6 -
drivers/staging/winbond/mds_s.h | 3 +-
drivers/staging/winbond/rxisr.c | 29 +-
drivers/staging/winbond/scan_s.h | 3 +-
drivers/staging/winbond/sme_s.h | 3 +-
drivers/staging/winbond/wbhal.c | 586 ++++++++++++++++----------------
drivers/staging/winbond/wbhal_f.h | 2 -
drivers/staging/winbond/wbhal_s.h | 2 +-
10 files changed, 312 insertions(+), 343 deletions(-)
diff --git a/drivers/staging/winbond/bssdscpt.h b/drivers/staging/winbond/bssdscpt.h
index 6f557cb..90b5682 100644
--- a/drivers/staging/winbond/bssdscpt.h
+++ b/drivers/staging/winbond/bssdscpt.h
@@ -79,7 +79,7 @@ typedef struct BSSDescriptionElement
u16 wIndex; // THIS BSS element entry index
void* psadapter; // pointer to THIS adapter
- OS_TIMER nTimer; // MLME timer
+ struct timer_list timer; // MLME timer
// Authentication
u16 wAuthAlgo; // peer MAC MLME use Auth algorithm, default OPEN_AUTH
diff --git a/drivers/staging/winbond/linux/common.h b/drivers/staging/winbond/linux/common.h
index 42c23a8..521b68a 100644
--- a/drivers/staging/winbond/linux/common.h
+++ b/drivers/staging/winbond/linux/common.h
@@ -84,24 +84,5 @@
#define OS_MEMORY_CLEAR( _A, _S ) memset( (u8 *)_A,0,_S)
#define OS_MEMORY_COMPARE( _A, _B, _S ) (memcmp(_A,_B,_S)? 0 : 1) // Definition is reverse with Ndis 1: the same 0: different
-#define OS_TIMER struct timer_list
-#define OS_TIMER_INITIAL( _T, _F, _P ) \
-{ \
- init_timer( _T ); \
- (_T)->function = (void *)_F##_1a; \
- (_T)->data = (unsigned long)_P; \
-}
-
-// _S : Millisecond
-// 20060420 At least 1 large than jiffies
-#define OS_TIMER_SET( _T, _S ) \
-{ \
- (_T)->expires = jiffies + ((_S*HZ+999)/1000);\
- add_timer( _T ); \
-}
-#define OS_TIMER_CANCEL( _T, _B ) del_timer_sync( _T )
-#define OS_TIMER_GET_SYS_TIME( _T ) (*_T=jiffies)
-
-
#endif // COMMON_DEF
diff --git a/drivers/staging/winbond/mds_f.h b/drivers/staging/winbond/mds_f.h
index 0733b9f..4258b32 100644
--- a/drivers/staging/winbond/mds_f.h
+++ b/drivers/staging/winbond/mds_f.h
@@ -12,13 +12,7 @@ extern void DataDmp(u8 *pdata, u32 len, u32 offset);
void vRxTimerInit(struct wb35_adapter *adapter);
void vRxTimerStart(struct wb35_adapter *adapter, int timeout_value);
-void RxTimerHandler_1a( struct wb35_adapter *adapter);
void vRxTimerStop(struct wb35_adapter *adapter);
-void RxTimerHandler( void* SystemSpecific1,
- struct wb35_adapter * adapter,
- void* SystemSpecific2,
- void* SystemSpecific3);
-
// For Asynchronous indicating. The routine collocates with USB.
void Mds_MsduProcess( struct wb35_adapter *adapter, PRXLAYER1 pRxLayer1, u8 SlotIndex);
diff --git a/drivers/staging/winbond/mds_s.h b/drivers/staging/winbond/mds_s.h
index 283945c..ac1875f 100644
--- a/drivers/staging/winbond/mds_s.h
+++ b/drivers/staging/winbond/mds_s.h
@@ -133,8 +133,7 @@ typedef struct _MDS
u8 boCounterMeasureBlock;
u8 reserved_4[2];
- //NDIS_MINIPORT_TIMER nTimer;
- OS_TIMER nTimer;
+ struct timer_list timer;
u32 TxTsc; // 20060214
u32 TxTsc_2; // 20060214
diff --git a/drivers/staging/winbond/rxisr.c b/drivers/staging/winbond/rxisr.c
index 6678660..de49a49 100644
--- a/drivers/staging/winbond/rxisr.c
+++ b/drivers/staging/winbond/rxisr.c
@@ -1,30 +1,27 @@
#include "os_common.h"
-void vRxTimerInit(struct wb35_adapter * adapter)
+static void RxTimerHandler(unsigned long data)
{
- OS_TIMER_INITIAL(&(adapter->Mds.nTimer), (void*) RxTimerHandler, (void*) adapter);
+ WARN_ON(1);
}
-void vRxTimerStart(struct wb35_adapter * adapter, int timeout_value)
+void vRxTimerInit(struct wb35_adapter *adapter)
{
- if (timeout_value<MIN_TIMEOUT_VAL)
- timeout_value=MIN_TIMEOUT_VAL;
-
- OS_TIMER_SET( &(adapter->Mds.nTimer), timeout_value );
+ init_timer(&adapter->Mds.timer);
+ adapter->Mds.timer.function = RxTimerHandler;
+ adapter->Mds.timer.data = (unsigned long) adapter;
}
-void vRxTimerStop(struct wb35_adapter * adapter)
+void vRxTimerStart(struct wb35_adapter *adapter, int timeout_value)
{
- OS_TIMER_CANCEL( &(adapter->Mds.nTimer), 0 );
-}
+ if (timeout_value < MIN_TIMEOUT_VAL)
+ timeout_value = MIN_TIMEOUT_VAL;
-void RxTimerHandler_1a( struct wb35_adapter * adapter)
-{
- RxTimerHandler(NULL, adapter, NULL, NULL);
+ adapter->Mds.timer.expires = jiffies + msecs_to_jiffies(timeout_value);
+ add_timer(&adapter->Mds.timer);
}
-void RxTimerHandler(void* SystemSpecific1, struct wb35_adapter * adapter,
- void* SystemSpecific2, void* SystemSpecific3)
+void vRxTimerStop(struct wb35_adapter *adapter)
{
- WARN_ON(1);
+ del_timer_sync(&adapter->Mds.timer);
}
diff --git a/drivers/staging/winbond/scan_s.h b/drivers/staging/winbond/scan_s.h
index a7489cb..a952396 100644
--- a/drivers/staging/winbond/scan_s.h
+++ b/drivers/staging/winbond/scan_s.h
@@ -62,8 +62,7 @@ typedef struct _SCAN_PARAMETERS
u8 boCCAbusy; // Wb: HWMAC CCA busy status
u8 reserved_2;
- //NDIS_MINIPORT_TIMER nTimer;
- OS_TIMER nTimer;
+ struct timer_list timer;
u32 ScanTimeStamp; //Increase 1 per background scan(1 minute)
u32 BssTimeStamp; //Increase 1 per connect status check
diff --git a/drivers/staging/winbond/sme_s.h b/drivers/staging/winbond/sme_s.h
index de4efa1..33f5d2a 100644
--- a/drivers/staging/winbond/sme_s.h
+++ b/drivers/staging/winbond/sme_s.h
@@ -106,8 +106,7 @@ typedef struct _SME_PARAMETERS
u8 bDesiredPowerSave;
// SME timer and timeout value
- //NDIS_MINIPORT_TIMER nTimer;
- OS_TIMER nTimer;
+ struct timer_list timer;
u8 boInTimerHandler;
u8 boAuthRetryActive;
diff --git a/drivers/staging/winbond/wbhal.c b/drivers/staging/winbond/wbhal.c
index 69dcedf..3edcc47 100644
--- a/drivers/staging/winbond/wbhal.c
+++ b/drivers/staging/winbond/wbhal.c
@@ -28,6 +28,292 @@ void hal_get_permanent_address( phw_data_t pHwData, u8 *pethernet_address )
memcpy( pethernet_address, pHwData->PermanentMacAddress, 6 );
}
+static void hal_led_control(unsigned long data)
+{
+ phw_data_t pHwData = (phw_data_t) data;
+ struct wb35_adapter * adapter = pHwData->adapter;
+ struct wb35_reg *reg = &pHwData->reg;
+ u32 LEDSet = (pHwData->SoftwareSet & HAL_LED_SET_MASK) >> HAL_LED_SET_SHIFT;
+ u8 LEDgray[20] = { 0,3,4,6,8,10,11,12,13,14,15,14,13,12,11,10,8,6,4,2 };
+ u8 LEDgray2[30] = { 7,8,9,10,11,12,13,14,15,0,0,0,0,0,0,0,0,0,0,0,0,0,15,14,13,12,11,10,9,8 };
+ u32 TimeInterval = 500, ltmp, ltmp2;
+ ltmp=0;
+
+ if( pHwData->SurpriseRemove ) return;
+
+ if( pHwData->LED_control ) {
+ ltmp2 = pHwData->LED_control & 0xff;
+ if( ltmp2 == 5 ) // 5 is WPS mode
+ {
+ TimeInterval = 100;
+ ltmp2 = (pHwData->LED_control>>8) & 0xff;
+ switch( ltmp2 )
+ {
+ case 1: // [0.2 On][0.1 Off]...
+ pHwData->LED_Blinking %= 3;
+ ltmp = 0x1010; // Led 1 & 0 Green and Red
+ if( pHwData->LED_Blinking == 2 ) // Turn off
+ ltmp = 0;
+ break;
+ case 2: // [0.1 On][0.1 Off]...
+ pHwData->LED_Blinking %= 2;
+ ltmp = 0x0010; // Led 0 red color
+ if( pHwData->LED_Blinking ) // Turn off
+ ltmp = 0;
+ break;
+ case 3: // [0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.5 Off]...
+ pHwData->LED_Blinking %= 15;
+ ltmp = 0x0010; // Led 0 red color
+ if( (pHwData->LED_Blinking >= 9) || (pHwData->LED_Blinking%2) ) // Turn off 0.6 sec
+ ltmp = 0;
+ break;
+ case 4: // [300 On][ off ]
+ ltmp = 0x1000; // Led 1 Green color
+ if( pHwData->LED_Blinking >= 3000 )
+ ltmp = 0; // led maybe on after 300sec * 32bit counter overlap.
+ break;
+ }
+ pHwData->LED_Blinking++;
+
+ reg->U1BC_LEDConfigure = ltmp;
+ if( LEDSet != 7 ) // Only 111 mode has 2 LEDs on PCB.
+ {
+ reg->U1BC_LEDConfigure |= (ltmp &0xff)<<8; // Copy LED result to each LED control register
+ reg->U1BC_LEDConfigure |= (ltmp &0xff00)>>8;
+ }
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
+ }
+ }
+ else if( pHwData->CurrentRadioSw || pHwData->CurrentRadioHw ) // If radio off
+ {
+ if( reg->U1BC_LEDConfigure & 0x1010 )
+ {
+ reg->U1BC_LEDConfigure &= ~0x1010;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
+ }
+ }
+ else
+ {
+ switch( LEDSet )
+ {
+ case 4: // [100] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
+ if( !pHwData->LED_LinkOn ) // Blink only if not Link On
+ {
+ // Blinking if scanning is on progress
+ if( pHwData->LED_Scanning )
+ {
+ if( pHwData->LED_Blinking == 0 )
+ {
+ reg->U1BC_LEDConfigure |= 0x10;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On
+ pHwData->LED_Blinking = 1;
+ TimeInterval = 300;
+ }
+ else
+ {
+ reg->U1BC_LEDConfigure &= ~0x10;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
+ pHwData->LED_Blinking = 0;
+ TimeInterval = 300;
+ }
+ }
+ else
+ {
+ //Turn Off LED_0
+ if( reg->U1BC_LEDConfigure & 0x10 )
+ {
+ reg->U1BC_LEDConfigure &= ~0x10;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
+ }
+ }
+ }
+ else
+ {
+ // Turn On LED_0
+ if( (reg->U1BC_LEDConfigure & 0x10) == 0 )
+ {
+ reg->U1BC_LEDConfigure |= 0x10;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
+ }
+ }
+ break;
+
+ case 6: // [110] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
+ if( !pHwData->LED_LinkOn ) // Blink only if not Link On
+ {
+ // Blinking if scanning is on progress
+ if( pHwData->LED_Scanning )
+ {
+ if( pHwData->LED_Blinking == 0 )
+ {
+ reg->U1BC_LEDConfigure &= ~0xf;
+ reg->U1BC_LEDConfigure |= 0x10;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On
+ pHwData->LED_Blinking = 1;
+ TimeInterval = 300;
+ }
+ else
+ {
+ reg->U1BC_LEDConfigure &= ~0x1f;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
+ pHwData->LED_Blinking = 0;
+ TimeInterval = 300;
+ }
+ }
+ else
+ {
+ // 20060901 Gray blinking if in disconnect state and not scanning
+ ltmp = reg->U1BC_LEDConfigure;
+ reg->U1BC_LEDConfigure &= ~0x1f;
+ if( LEDgray2[(pHwData->LED_Blinking%30)] )
+ {
+ reg->U1BC_LEDConfigure |= 0x10;
+ reg->U1BC_LEDConfigure |= LEDgray2[ (pHwData->LED_Blinking%30) ];
+ }
+ pHwData->LED_Blinking++;
+ if( reg->U1BC_LEDConfigure != ltmp )
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
+ TimeInterval = 100;
+ }
+ }
+ else
+ {
+ // Turn On LED_0
+ if( (reg->U1BC_LEDConfigure & 0x10) == 0 )
+ {
+ reg->U1BC_LEDConfigure |= 0x10;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
+ }
+ }
+ break;
+
+ case 5: // [101] Only 1 Led be placed on PCB and use LED_1 for showing
+ if( !pHwData->LED_LinkOn ) // Blink only if not Link On
+ {
+ // Blinking if scanning is on progress
+ if( pHwData->LED_Scanning )
+ {
+ if( pHwData->LED_Blinking == 0 )
+ {
+ reg->U1BC_LEDConfigure |= 0x1000;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
+ pHwData->LED_Blinking = 1;
+ TimeInterval = 300;
+ }
+ else
+ {
+ reg->U1BC_LEDConfigure &= ~0x1000;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off
+ pHwData->LED_Blinking = 0;
+ TimeInterval = 300;
+ }
+ }
+ else
+ {
+ //Turn Off LED_1
+ if( reg->U1BC_LEDConfigure & 0x1000 )
+ {
+ reg->U1BC_LEDConfigure &= ~0x1000;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off
+ }
+ }
+ }
+ else
+ {
+ // Is transmitting/receiving ??
+ if( (OS_CURRENT_RX_BYTE( adapter ) != pHwData->RxByteCountLast ) ||
+ (OS_CURRENT_TX_BYTE( adapter ) != pHwData->TxByteCountLast ) )
+ {
+ if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 )
+ {
+ reg->U1BC_LEDConfigure |= 0x3000;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
+ }
+
+ // Update variable
+ pHwData->RxByteCountLast = OS_CURRENT_RX_BYTE( adapter );
+ pHwData->TxByteCountLast = OS_CURRENT_TX_BYTE( adapter );
+ TimeInterval = 200;
+ }
+ else
+ {
+ // Turn On LED_1 and blinking if transmitting/receiving
+ if( (reg->U1BC_LEDConfigure & 0x3000) != 0x1000 )
+ {
+ reg->U1BC_LEDConfigure &= ~0x3000;
+ reg->U1BC_LEDConfigure |= 0x1000;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
+ }
+ }
+ }
+ break;
+
+ default: // Default setting. 2 LED be placed on PCB. LED_0: Link On LED_1 Active
+ if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 )
+ {
+ reg->U1BC_LEDConfigure |= 0x3000;// LED_1 is always on and event enable
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
+ }
+
+ if( pHwData->LED_Blinking )
+ {
+ // Gray blinking
+ reg->U1BC_LEDConfigure &= ~0x0f;
+ reg->U1BC_LEDConfigure |= 0x10;
+ reg->U1BC_LEDConfigure |= LEDgray[ (pHwData->LED_Blinking-1)%20 ];
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
+
+ pHwData->LED_Blinking += 2;
+ if( pHwData->LED_Blinking < 40 )
+ TimeInterval = 100;
+ else
+ {
+ pHwData->LED_Blinking = 0; // Stop blinking
+ reg->U1BC_LEDConfigure &= ~0x0f;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
+ }
+ break;
+ }
+
+ if( pHwData->LED_LinkOn )
+ {
+ if( !(reg->U1BC_LEDConfigure & 0x10) ) // Check the LED_0
+ {
+ //Try to turn ON LED_0 after gray blinking
+ reg->U1BC_LEDConfigure |= 0x10;
+ pHwData->LED_Blinking = 1; //Start blinking
+ TimeInterval = 50;
+ }
+ }
+ else
+ {
+ if( reg->U1BC_LEDConfigure & 0x10 ) // Check the LED_0
+ {
+ reg->U1BC_LEDConfigure &= ~0x10;
+ Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
+ }
+ }
+ break;
+ }
+
+ //20060828.1 Active send null packet to avoid AP disconnect
+ if( pHwData->LED_LinkOn )
+ {
+ pHwData->NullPacketCount += TimeInterval;
+ if( pHwData->NullPacketCount >= DEFAULT_NULL_PACKET_COUNT )
+ {
+ pHwData->NullPacketCount = 0;
+ }
+ }
+ }
+
+ pHwData->time_count += TimeInterval;
+ Wb35Tx_CurrentTime( pHwData, pHwData->time_count ); // 20060928 add
+ pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(TimeInterval);
+ add_timer(&pHwData->LEDTimer);
+}
+
+
u8 hal_init_hardware(phw_data_t pHwData, struct wb35_adapter * adapter)
{
u16 SoftwareSet;
@@ -44,8 +330,11 @@ u8 hal_init_hardware(phw_data_t pHwData, struct wb35_adapter * adapter)
pHwData->InitialResource = 3;
if (Wb35Rx_initial(pHwData)) {
pHwData->InitialResource = 4;
- OS_TIMER_INITIAL( &pHwData->LEDTimer, hal_led_control, pHwData );
- OS_TIMER_SET( &pHwData->LEDTimer, 1000 ); // 20060623
+ init_timer(&pHwData->LEDTimer);
+ pHwData->LEDTimer.function = hal_led_control;
+ pHwData->LEDTimer.data = (unsigned long) pHwData;
+ pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(1000);
+ add_timer(&pHwData->LEDTimer);
//
// For restrict to vendor's hardware
@@ -77,7 +366,7 @@ void hal_halt(phw_data_t pHwData, void *ppa_data)
switch( pHwData->InitialResource )
{
case 4:
- case 3: OS_TIMER_CANCEL( &pHwData->LEDTimer, &cancel );
+ case 3: del_timer_sync(&pHwData->LEDTimer);
msleep(100); // Wait for Timer DPC exit 940623.2
Wb35Rx_destroy( pHwData ); // Release the Rx
case 2: Wb35Tx_destroy( pHwData ); // Release the Tx
@@ -431,294 +720,6 @@ s32 hal_get_rssi_bss( phw_data_t pHwData, u16 idx, u8 Count )
}
//---------------------------------------------------------------------------
-void hal_led_control_1a( phw_data_t pHwData )
-{
- hal_led_control( NULL, pHwData, NULL, NULL );
-}
-
-void hal_led_control( void* S1, phw_data_t pHwData, void* S3, void* S4 )
-{
- struct wb35_adapter * adapter = pHwData->adapter;
- struct wb35_reg *reg = &pHwData->reg;
- u32 LEDSet = (pHwData->SoftwareSet & HAL_LED_SET_MASK) >> HAL_LED_SET_SHIFT;
- u8 LEDgray[20] = { 0,3,4,6,8,10,11,12,13,14,15,14,13,12,11,10,8,6,4,2 };
- u8 LEDgray2[30] = { 7,8,9,10,11,12,13,14,15,0,0,0,0,0,0,0,0,0,0,0,0,0,15,14,13,12,11,10,9,8 };
- u32 TimeInterval = 500, ltmp, ltmp2;
- ltmp=0;
-
- if( pHwData->SurpriseRemove ) return;
-
- if( pHwData->LED_control ) {
- ltmp2 = pHwData->LED_control & 0xff;
- if( ltmp2 == 5 ) // 5 is WPS mode
- {
- TimeInterval = 100;
- ltmp2 = (pHwData->LED_control>>8) & 0xff;
- switch( ltmp2 )
- {
- case 1: // [0.2 On][0.1 Off]...
- pHwData->LED_Blinking %= 3;
- ltmp = 0x1010; // Led 1 & 0 Green and Red
- if( pHwData->LED_Blinking == 2 ) // Turn off
- ltmp = 0;
- break;
- case 2: // [0.1 On][0.1 Off]...
- pHwData->LED_Blinking %= 2;
- ltmp = 0x0010; // Led 0 red color
- if( pHwData->LED_Blinking ) // Turn off
- ltmp = 0;
- break;
- case 3: // [0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.5 Off]...
- pHwData->LED_Blinking %= 15;
- ltmp = 0x0010; // Led 0 red color
- if( (pHwData->LED_Blinking >= 9) || (pHwData->LED_Blinking%2) ) // Turn off 0.6 sec
- ltmp = 0;
- break;
- case 4: // [300 On][ off ]
- ltmp = 0x1000; // Led 1 Green color
- if( pHwData->LED_Blinking >= 3000 )
- ltmp = 0; // led maybe on after 300sec * 32bit counter overlap.
- break;
- }
- pHwData->LED_Blinking++;
-
- reg->U1BC_LEDConfigure = ltmp;
- if( LEDSet != 7 ) // Only 111 mode has 2 LEDs on PCB.
- {
- reg->U1BC_LEDConfigure |= (ltmp &0xff)<<8; // Copy LED result to each LED control register
- reg->U1BC_LEDConfigure |= (ltmp &0xff00)>>8;
- }
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
- }
- }
- else if( pHwData->CurrentRadioSw || pHwData->CurrentRadioHw ) // If radio off
- {
- if( reg->U1BC_LEDConfigure & 0x1010 )
- {
- reg->U1BC_LEDConfigure &= ~0x1010;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
- }
- }
- else
- {
- switch( LEDSet )
- {
- case 4: // [100] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
- if( !pHwData->LED_LinkOn ) // Blink only if not Link On
- {
- // Blinking if scanning is on progress
- if( pHwData->LED_Scanning )
- {
- if( pHwData->LED_Blinking == 0 )
- {
- reg->U1BC_LEDConfigure |= 0x10;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On
- pHwData->LED_Blinking = 1;
- TimeInterval = 300;
- }
- else
- {
- reg->U1BC_LEDConfigure &= ~0x10;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
- pHwData->LED_Blinking = 0;
- TimeInterval = 300;
- }
- }
- else
- {
- //Turn Off LED_0
- if( reg->U1BC_LEDConfigure & 0x10 )
- {
- reg->U1BC_LEDConfigure &= ~0x10;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
- }
- }
- }
- else
- {
- // Turn On LED_0
- if( (reg->U1BC_LEDConfigure & 0x10) == 0 )
- {
- reg->U1BC_LEDConfigure |= 0x10;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
- }
- }
- break;
-
- case 6: // [110] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
- if( !pHwData->LED_LinkOn ) // Blink only if not Link On
- {
- // Blinking if scanning is on progress
- if( pHwData->LED_Scanning )
- {
- if( pHwData->LED_Blinking == 0 )
- {
- reg->U1BC_LEDConfigure &= ~0xf;
- reg->U1BC_LEDConfigure |= 0x10;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On
- pHwData->LED_Blinking = 1;
- TimeInterval = 300;
- }
- else
- {
- reg->U1BC_LEDConfigure &= ~0x1f;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
- pHwData->LED_Blinking = 0;
- TimeInterval = 300;
- }
- }
- else
- {
- // 20060901 Gray blinking if in disconnect state and not scanning
- ltmp = reg->U1BC_LEDConfigure;
- reg->U1BC_LEDConfigure &= ~0x1f;
- if( LEDgray2[(pHwData->LED_Blinking%30)] )
- {
- reg->U1BC_LEDConfigure |= 0x10;
- reg->U1BC_LEDConfigure |= LEDgray2[ (pHwData->LED_Blinking%30) ];
- }
- pHwData->LED_Blinking++;
- if( reg->U1BC_LEDConfigure != ltmp )
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
- TimeInterval = 100;
- }
- }
- else
- {
- // Turn On LED_0
- if( (reg->U1BC_LEDConfigure & 0x10) == 0 )
- {
- reg->U1BC_LEDConfigure |= 0x10;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
- }
- }
- break;
-
- case 5: // [101] Only 1 Led be placed on PCB and use LED_1 for showing
- if( !pHwData->LED_LinkOn ) // Blink only if not Link On
- {
- // Blinking if scanning is on progress
- if( pHwData->LED_Scanning )
- {
- if( pHwData->LED_Blinking == 0 )
- {
- reg->U1BC_LEDConfigure |= 0x1000;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
- pHwData->LED_Blinking = 1;
- TimeInterval = 300;
- }
- else
- {
- reg->U1BC_LEDConfigure &= ~0x1000;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off
- pHwData->LED_Blinking = 0;
- TimeInterval = 300;
- }
- }
- else
- {
- //Turn Off LED_1
- if( reg->U1BC_LEDConfigure & 0x1000 )
- {
- reg->U1BC_LEDConfigure &= ~0x1000;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off
- }
- }
- }
- else
- {
- // Is transmitting/receiving ??
- if( (OS_CURRENT_RX_BYTE( adapter ) != pHwData->RxByteCountLast ) ||
- (OS_CURRENT_TX_BYTE( adapter ) != pHwData->TxByteCountLast ) )
- {
- if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 )
- {
- reg->U1BC_LEDConfigure |= 0x3000;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
- }
-
- // Update variable
- pHwData->RxByteCountLast = OS_CURRENT_RX_BYTE( adapter );
- pHwData->TxByteCountLast = OS_CURRENT_TX_BYTE( adapter );
- TimeInterval = 200;
- }
- else
- {
- // Turn On LED_1 and blinking if transmitting/receiving
- if( (reg->U1BC_LEDConfigure & 0x3000) != 0x1000 )
- {
- reg->U1BC_LEDConfigure &= ~0x3000;
- reg->U1BC_LEDConfigure |= 0x1000;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
- }
- }
- }
- break;
-
- default: // Default setting. 2 LED be placed on PCB. LED_0: Link On LED_1 Active
- if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 )
- {
- reg->U1BC_LEDConfigure |= 0x3000;// LED_1 is always on and event enable
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
- }
-
- if( pHwData->LED_Blinking )
- {
- // Gray blinking
- reg->U1BC_LEDConfigure &= ~0x0f;
- reg->U1BC_LEDConfigure |= 0x10;
- reg->U1BC_LEDConfigure |= LEDgray[ (pHwData->LED_Blinking-1)%20 ];
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
-
- pHwData->LED_Blinking += 2;
- if( pHwData->LED_Blinking < 40 )
- TimeInterval = 100;
- else
- {
- pHwData->LED_Blinking = 0; // Stop blinking
- reg->U1BC_LEDConfigure &= ~0x0f;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
- }
- break;
- }
-
- if( pHwData->LED_LinkOn )
- {
- if( !(reg->U1BC_LEDConfigure & 0x10) ) // Check the LED_0
- {
- //Try to turn ON LED_0 after gray blinking
- reg->U1BC_LEDConfigure |= 0x10;
- pHwData->LED_Blinking = 1; //Start blinking
- TimeInterval = 50;
- }
- }
- else
- {
- if( reg->U1BC_LEDConfigure & 0x10 ) // Check the LED_0
- {
- reg->U1BC_LEDConfigure &= ~0x10;
- Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
- }
- }
- break;
- }
-
- //20060828.1 Active send null packet to avoid AP disconnect
- if( pHwData->LED_LinkOn )
- {
- pHwData->NullPacketCount += TimeInterval;
- if( pHwData->NullPacketCount >= DEFAULT_NULL_PACKET_COUNT )
- {
- pHwData->NullPacketCount = 0;
- }
- }
- }
-
- pHwData->time_count += TimeInterval;
- Wb35Tx_CurrentTime( pHwData, pHwData->time_count ); // 20060928 add
- OS_TIMER_SET( &pHwData->LEDTimer, TimeInterval ); // 20060623.1
-}
-
void hal_set_phy_type( phw_data_t pHwData, u8 PhyType )
{
@@ -867,7 +868,8 @@ unsigned char hal_set_LED(phw_data_t pHwData, u32 Mode) // 20061108 for WPS led
{
pHwData->LED_Blinking = 0;
pHwData->LED_control = Mode;
- OS_TIMER_SET( &pHwData->LEDTimer, 10 ); // 20060623
+ pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(10);
+ add_timer(&pHwData->LEDTimer);
return true;
}
diff --git a/drivers/staging/winbond/wbhal_f.h b/drivers/staging/winbond/wbhal_f.h
index 239c301..7e6ebf2 100644
--- a/drivers/staging/winbond/wbhal_f.h
+++ b/drivers/staging/winbond/wbhal_f.h
@@ -68,8 +68,6 @@ s32 hal_get_rssi( phw_data_t pHwData, u32 *HalRssiArry, u8 Count );
s32 hal_get_rssi_bss( phw_data_t pHwData, u16 idx, u8 Count );
void hal_set_connect_info( phw_data_t pHwData, unsigned char boConnect );
u8 hal_get_est_sq3( phw_data_t pHwData, u8 Count );
-void hal_led_control_1a( phw_data_t pHwData );
-void hal_led_control( void* S1, phw_data_t pHwData, void* S3, void* S4 );
void hal_set_rf_power( phw_data_t pHwData, u8 PowerIndex ); // 20060621 Modify
void hal_reset_counter( phw_data_t pHwData );
void hal_set_radio_mode( phw_data_t pHwData, unsigned char boValue);
diff --git a/drivers/staging/winbond/wbhal_s.h b/drivers/staging/winbond/wbhal_s.h
index 47f99e1..2d3adfc 100644
--- a/drivers/staging/winbond/wbhal_s.h
+++ b/drivers/staging/winbond/wbhal_s.h
@@ -510,7 +510,7 @@ typedef struct _HW_DATA_T
WB35TX Wb35Tx; // Need Wb35Tx.h
WB35RX Wb35Rx; // Need Wb35Rx.h
- OS_TIMER LEDTimer;// For LED
+ struct timer_list LEDTimer;// For LED
u32 LEDpoint;// For LED
--
1.5.3.7
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists