diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h index b97aecb..8de644b 100644 --- a/arch/x86/include/asm/hw_irq.h +++ b/arch/x86/include/asm/hw_irq.h @@ -109,9 +109,7 @@ extern asmlinkage void smp_invalidate_interrupt(struct pt_regs *); #endif #endif -#ifdef CONFIG_X86_32 -extern void (*const interrupt[NR_VECTORS])(void); -#endif +extern void (*__initconst interrupt[NR_VECTORS-FIRST_EXTERNAL_VECTOR])(void); typedef int vector_irq_t[NR_VECTORS]; DECLARE_PER_CPU(vector_irq_t, vector_irq); diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index 28b597e..ffd1a55 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -619,29 +619,38 @@ END(syscall_badsys) 27:; /* - * Build the entry stubs and pointer table with - * some assembler magic. + * Build the entry stubs and pointer table with some assembler magic. + * We pack 7 stubs into a single 32-byte chunk, which will fit in a + * single cache line on all modern x86 implementations. */ -.section .rodata,"a" + .section ".init.rodata","a" ENTRY(interrupt) -.text - + .text + .balign 32 ENTRY(irq_entries_start) RING0_INT_FRAME -vector=0 -.rept NR_VECTORS - ALIGN - .if vector +vector=FIRST_EXTERNAL_VECTOR +.rept (NR_VECTORS-FIRST_EXTERNAL_VECTOR+6)/7 + .balign 32 + .rept 7 + .if vector < NR_VECTORS + .if vector != FIRST_EXTERNAL_VECTOR CFI_ADJUST_CFA_OFFSET -4 - .endif -1: pushl $~(vector) + .endif +1: pushl $(~vector+0x80) /* Note: always in signed byte range */ CFI_ADJUST_CFA_OFFSET 4 - jmp common_interrupt - .previous + .if ((vector-FIRST_EXTERNAL_VECTOR)%7) != 6 + jmp 2f + .endif + .previous .long 1b - .text + .text vector=vector+1 + .endif + .endr +2: jmp common_interrupt .endr + .balign 32 END(irq_entries_start) .previous @@ -654,6 +663,7 @@ END(interrupt) */ ALIGN common_interrupt: + addl $-0x80,(%esp) /* Adjust vector into the [-256,-1] range */ SAVE_ALL TRACE_IRQS_OFF movl %esp,%eax diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index ddeeb10..cd0ca70 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -629,6 +629,46 @@ END(stub_rt_sigreturn) vector already pushed) */ #define XCPT_FRAME _frame ORIG_RAX +/* + * Build the entry stubs and pointer table with some assembler magic. + * We pack 7 stubs into a single 32-byte chunk, which will fit in a + * single cache line on all modern x86 implementations. + */ + .section ".init.rodata","a" +ENTRY(interrupt) + .text + .balign 32 +ENTRY(irq_entries_start) + INTR_FRAME +vector=FIRST_EXTERNAL_VECTOR +.rept (NR_VECTORS-FIRST_EXTERNAL_VECTOR+6)/7 + .balign 32 + .rept 7 + .if vector < NR_VECTORS + .if vector != FIRST_EXTERNAL_VECTOR + CFI_ADJUST_CFA_OFFSET -8 + .endif +1: pushq $(~vector+0x80) /* Note: always in signed byte range */ + CFI_ADJUST_CFA_OFFSET 8 + .if ((vector-FIRST_EXTERNAL_VECTOR)%7) != 6 + jmp 2f + .endif + .previous + .quad 1b + .text +vector=vector+1 + .endif + .endr +2: jmp common_interrupt +.endr + CFI_ENDPROC + .balign 32 +END(irq_entries_start) + +.previous +END(interrupt) +.previous + /* * Interrupt entry/exit. * @@ -637,11 +677,12 @@ END(stub_rt_sigreturn) * Entry runs with interrupts off. */ -/* 0(%rsp): interrupt number */ +/* 0(%rsp): ~(interrupt number)+0x80 */ .macro interrupt func + addq $-0x80,(%rsp) /* Adjust vector to [-256,-1] range */ cld SAVE_ARGS - leaq -ARGOFFSET(%rsp),%rdi # arg1 for handler + leaq -ARGOFFSET(%rsp),%rdi /* arg1 for handler */ pushq %rbp /* * Save rbp twice: One is for marking the stack frame, as usual, and the @@ -672,7 +713,7 @@ END(stub_rt_sigreturn) call \func .endm -ENTRY(common_interrupt) +common_interrupt: XCPT_FRAME interrupt do_IRQ /* 0(%rsp): oldrsp-ARGOFFSET */ diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c index 845aa98..607db63 100644 --- a/arch/x86/kernel/irqinit_32.c +++ b/arch/x86/kernel/irqinit_32.c @@ -129,7 +129,7 @@ void __init native_init_IRQ(void) for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) { /* SYSCALL_VECTOR was reserved in trap_init. */ if (i != SYSCALL_VECTOR) - set_intr_gate(i, interrupt[i]); + set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); } diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c index ff02353..8670b3c 100644 --- a/arch/x86/kernel/irqinit_64.c +++ b/arch/x86/kernel/irqinit_64.c @@ -24,41 +24,6 @@ #include /* - * Common place to define all x86 IRQ vectors - * - * This builds up the IRQ handler stubs using some ugly macros in irq.h - * - * These macros create the low-level assembly IRQ routines that save - * register context and call do_IRQ(). do_IRQ() then does all the - * operations that are needed to keep the AT (or SMP IOAPIC) - * interrupt-controller happy. - */ - -#define IRQ_NAME2(nr) nr##_interrupt(void) -#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr) - -/* - * SMP has a few special interrupts for IPI messages - */ - -#define BUILD_IRQ(nr) \ - asmlinkage void IRQ_NAME(nr); \ - asm("\n.text\n.p2align\n" \ - "IRQ" #nr "_interrupt:\n\t" \ - "push $~(" #nr ") ; " \ - "jmp common_interrupt\n" \ - ".previous"); - -#define BI(x,y) \ - BUILD_IRQ(x##y) - -#define BUILD_16_IRQS(x) \ - BI(x,0) BI(x,1) BI(x,2) BI(x,3) \ - BI(x,4) BI(x,5) BI(x,6) BI(x,7) \ - BI(x,8) BI(x,9) BI(x,a) BI(x,b) \ - BI(x,c) BI(x,d) BI(x,e) BI(x,f) - -/* * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: * (these are usually mapped to vectors 0x30-0x3f) */ @@ -73,37 +38,6 @@ * * (these are usually mapped into the 0x30-0xff vector range) */ - BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3) -BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7) -BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb) -BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf) - -#undef BUILD_16_IRQS -#undef BI - - -#define IRQ(x,y) \ - IRQ##x##y##_interrupt - -#define IRQLIST_16(x) \ - IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \ - IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \ - IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \ - IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f) - -/* for the irq vectors */ -static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = { - IRQLIST_16(0x2), IRQLIST_16(0x3), - IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7), - IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb), - IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf) -}; - -#undef IRQ -#undef IRQLIST_16 - - - /* * IRQ2 is cascade interrupt to second interrupt controller diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index a5d8e1a..50a7792 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -590,7 +590,8 @@ static void __init lguest_init_IRQ(void) * a straightforward 1 to 1 mapping, so force that here. */ __get_cpu_var(vector_irq)[vector] = i; if (vector != SYSCALL_VECTOR) { - set_intr_gate(vector, interrupt[vector]); + set_intr_gate(vector, + interrupt[vector-FIRST_EXTERNAL_VECTOR]); set_irq_chip_and_handler_name(i, &lguest_irq_controller, handle_level_irq, "level");