| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 16 Nov 2008 00:47:38 -0800
From: Yinghai Lu <yinghai@...nel.org>
To: Ingo Molnar <mingo@...e.hu>, Thomas Gleixner <tglx@...utronix.de>,
"H. Peter Anvin" <hpa@...or.com>,
Andrew Morton <akpm@...ux-foundation.org>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: [PATCH] x86: fix wakeup_cpu with numaq/es7000
Impact: fix wakeup path with numaq and es7000
while looking at wakeup_secondary_cpu for WAKE_SECONDARY_VIA_NMI
|#ifdef WAKE_SECONDARY_VIA_NMI
|/*
| * Poke the other CPU in the eye via NMI to wake it up. Remember that the normal
| * INIT, INIT, STARTUP sequence will reset the chip hard for us, and this
| * won't ... remember to clear down the APIC, etc later.
| */
|static int __devinit
|wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
|{
| unsigned long send_status, accept_status = 0;
| int maxlvt;
|...
| if (APIC_INTEGRATED(apic_version[phys_apicid])) {
| maxlvt = lapic_get_maxlvt();
there is no warning about undefined phys_apicid...
because WAKE_SECONDARY_VIA_NMI and WAKE_SECONDARY_VIA_NMI can not be defined
at the same time. so NUMAQ is using wrong wakeup_secondary_cpu.
so add wakeup_secondary_cup in x86_quirks
need to add functions in wakecpu.h to genapic for 32bit.
while looking further, about functions in wakecup.h for numaq and es7000 is
different to default to mach_wakecpu.h. but smpboot.c will only use default
mach_wakecpu.h with smphook.h
So need to add mach_wakecpu.h for mach_generic to support numaq and es7000.
Signed-off-by: Yinghai Lu <yinghai@...nel.org>
---
arch/x86/include/asm/bigsmp/apic.h | 2 -
arch/x86/include/asm/es7000/apic.h | 3 -
arch/x86/include/asm/es7000/wakecpu.h | 41 +++++---------------
arch/x86/include/asm/genapic_32.h | 17 ++++++++
arch/x86/include/asm/mach-default/mach_wakecpu.h | 24 ++++--------
arch/x86/include/asm/mach-default/smpboot_hooks.h | 6 +--
arch/x86/include/asm/mach-generic/mach_wakecpu.h | 12 ++++++
arch/x86/include/asm/numaq/wakecpu.h | 20 ++++------
arch/x86/include/asm/setup.h | 2 +
arch/x86/kernel/es7000_32.c | 44 ++++++++++++----------
arch/x86/kernel/numaq_32.c | 1
arch/x86/kernel/smpboot.c | 24 +++++++-----
arch/x86/mach-generic/bigsmp.c | 1
arch/x86/mach-generic/default.c | 1
arch/x86/mach-generic/summit.c | 1
15 files changed, 104 insertions(+), 95 deletions(-)
Index: linux-2.6/arch/x86/include/asm/bigsmp/apic.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/bigsmp/apic.h
+++ linux-2.6/arch/x86/include/asm/bigsmp/apic.h
@@ -24,8 +24,6 @@ static inline cpumask_t target_cpus(void
#define INT_DELIVERY_MODE (dest_Fixed)
#define INT_DEST_MODE (0) /* phys delivery to target proc */
#define NO_BALANCE_IRQ (0)
-#define WAKE_SECONDARY_VIA_INIT
-
static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
{
Index: linux-2.6/arch/x86/include/asm/es7000/apic.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/es7000/apic.h
+++ linux-2.6/arch/x86/include/asm/es7000/apic.h
@@ -23,8 +23,6 @@ static inline cpumask_t target_cpus(void
#define INT_DELIVERY_MODE (dest_LowestPrio)
#define INT_DEST_MODE (1) /* logical delivery broadcast to all procs */
#define NO_BALANCE_IRQ (1)
-#undef WAKE_SECONDARY_VIA_INIT
-#define WAKE_SECONDARY_VIA_MIP
#else
#define APIC_DFR_VALUE (APIC_DFR_FLAT)
#define INT_DELIVERY_MODE (dest_Fixed)
@@ -32,7 +30,6 @@ static inline cpumask_t target_cpus(void
#define NO_BALANCE_IRQ (0)
#undef APIC_DEST_LOGICAL
#define APIC_DEST_LOGICAL 0x0
-#define WAKE_SECONDARY_VIA_INIT
#endif
static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
Index: linux-2.6/arch/x86/include/asm/es7000/wakecpu.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/es7000/wakecpu.h
+++ linux-2.6/arch/x86/include/asm/es7000/wakecpu.h
@@ -1,36 +1,12 @@
#ifndef __ASM_ES7000_WAKECPU_H
#define __ASM_ES7000_WAKECPU_H
-/*
- * This file copes with machines that wakeup secondary CPUs by the
- * INIT, INIT, STARTUP sequence.
- */
-
-#ifdef CONFIG_ES7000_CLUSTERED_APIC
-#define WAKE_SECONDARY_VIA_MIP
-#else
-#define WAKE_SECONDARY_VIA_INIT
-#endif
-
-#ifdef WAKE_SECONDARY_VIA_MIP
-extern int es7000_start_cpu(int cpu, unsigned long eip);
-static inline int
-wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
-{
- int boot_error = 0;
- boot_error = es7000_start_cpu(phys_apicid, start_eip);
- return boot_error;
-}
-#endif
-
-#define TRAMPOLINE_LOW phys_to_virt(0x467)
-#define TRAMPOLINE_HIGH phys_to_virt(0x469)
-
-#define boot_cpu_apicid boot_cpu_physical_apicid
+#define TRAMPOLINE_LOW (0x467)
+#define TRAMPOLINE_HIGH (0x469)
static inline void wait_for_init_deassert(atomic_t *deassert)
{
-#ifdef WAKE_SECONDARY_VIA_INIT
+#ifndef CONFIG_ES7000_CLUSTERED_APIC
while (!atomic_read(deassert))
cpu_relax();
#endif
@@ -50,9 +26,12 @@ static inline void restore_NMI_vector(un
{
}
-#define inquire_remote_apic(apicid) do { \
- if (apic_verbosity >= APIC_DEBUG) \
- __inquire_remote_apic(apicid); \
- } while (0)
+extern void __inquire_remote_apic(int apicid);
+
+static inline void inquire_remote_apic(int apicid)
+{
+ if (apic_verbosity >= APIC_DEBUG)
+ __inquire_remote_apic(apicid);
+}
#endif /* __ASM_MACH_WAKECPU_H */
Index: linux-2.6/arch/x86/include/asm/genapic_32.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/genapic_32.h
+++ linux-2.6/arch/x86/include/asm/genapic_32.h
@@ -2,6 +2,7 @@
#define _ASM_X86_GENAPIC_32_H
#include <asm/mpspec.h>
+#include <asm/atomic.h>
/*
* Generic APIC driver interface.
@@ -65,6 +66,13 @@ struct genapic {
void (*send_IPI_allbutself)(int vector);
void (*send_IPI_all)(int vector);
#endif
+ int trampoline_low;
+ int trampoline_high;
+ void (*wait_for_init_deassert)(atomic_t *deassert);
+ void (*smp_callin_clear_local_apic)(void);
+ void (*store_NMI_vector)(unsigned short *high, unsigned short *low);
+ void (*restore_NMI_vector)(unsigned short *high, unsigned short *low);
+ void (*inquire_remote_apic)(int apicid);
};
#define APICFUNC(x) .x = x,
@@ -105,13 +113,20 @@ struct genapic {
APICFUNC(get_apic_id) \
.apic_id_mask = APIC_ID_MASK, \
APICFUNC(cpu_mask_to_apicid) \
- APICFUNC(vector_allocation_domain) \
+ APICFUNC(vector_allocation_domain) \
APICFUNC(acpi_madt_oem_check) \
IPIFUNC(send_IPI_mask) \
IPIFUNC(send_IPI_allbutself) \
IPIFUNC(send_IPI_all) \
APICFUNC(enable_apic_mode) \
APICFUNC(phys_pkg_id) \
+ .trampoline_low = TRAMPOLINE_LOW, \
+ .trampoline_high = TRAMPOLINE_HIGH, \
+ APICFUNC(wait_for_init_deassert) \
+ APICFUNC(smp_callin_clear_local_apic) \
+ APICFUNC(store_NMI_vector) \
+ APICFUNC(restore_NMI_vector) \
+ APICFUNC(inquire_remote_apic) \
}
extern struct genapic *genapic;
Index: linux-2.6/arch/x86/include/asm/mach-default/mach_wakecpu.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/mach-default/mach_wakecpu.h
+++ linux-2.6/arch/x86/include/asm/mach-default/mach_wakecpu.h
@@ -1,17 +1,8 @@
#ifndef _ASM_X86_MACH_DEFAULT_MACH_WAKECPU_H
#define _ASM_X86_MACH_DEFAULT_MACH_WAKECPU_H
-/*
- * This file copes with machines that wakeup secondary CPUs by the
- * INIT, INIT, STARTUP sequence.
- */
-
-#define WAKE_SECONDARY_VIA_INIT
-
-#define TRAMPOLINE_LOW phys_to_virt(0x467)
-#define TRAMPOLINE_HIGH phys_to_virt(0x469)
-
-#define boot_cpu_apicid boot_cpu_physical_apicid
+#define TRAMPOLINE_LOW (0x467)
+#define TRAMPOLINE_HIGH (0x469)
static inline void wait_for_init_deassert(atomic_t *deassert)
{
@@ -33,9 +24,12 @@ static inline void restore_NMI_vector(un
{
}
-#define inquire_remote_apic(apicid) do { \
- if (apic_verbosity >= APIC_DEBUG) \
- __inquire_remote_apic(apicid); \
- } while (0)
+extern void __inquire_remote_apic(int apicid);
+
+static inline void inquire_remote_apic(int apicid)
+{
+ if (apic_verbosity >= APIC_DEBUG)
+ __inquire_remote_apic(apicid);
+}
#endif /* _ASM_X86_MACH_DEFAULT_MACH_WAKECPU_H */
Index: linux-2.6/arch/x86/include/asm/numaq/wakecpu.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/numaq/wakecpu.h
+++ linux-2.6/arch/x86/include/asm/numaq/wakecpu.h
@@ -3,12 +3,8 @@
/* This file copes with machines that wakeup secondary CPUs by NMIs */
-#define WAKE_SECONDARY_VIA_NMI
-
-#define TRAMPOLINE_LOW phys_to_virt(0x8)
-#define TRAMPOLINE_HIGH phys_to_virt(0xa)
-
-#define boot_cpu_apicid boot_cpu_logical_apicid
+#define TRAMPOLINE_LOW (0x8)
+#define TRAMPOLINE_HIGH (0xa)
/* We don't do anything here because we use NMI's to boot instead */
static inline void wait_for_init_deassert(atomic_t *deassert)
@@ -27,17 +23,19 @@ static inline void smp_callin_clear_loca
static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
{
printk("Storing NMI vector\n");
- *high = *((volatile unsigned short *) TRAMPOLINE_HIGH);
- *low = *((volatile unsigned short *) TRAMPOLINE_LOW);
+ *high = *((volatile unsigned short *) phys_to_virt(TRAMPOLINE_HIGH));
+ *low = *((volatile unsigned short *) phys_to_virt(TRAMPOLINE_LOW));
}
static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
{
printk("Restoring NMI vector\n");
- *((volatile unsigned short *) TRAMPOLINE_HIGH) = *high;
- *((volatile unsigned short *) TRAMPOLINE_LOW) = *low;
+ *((volatile unsigned short *) phys_to_virt(TRAMPOLINE_HIGH)) = *high;
+ *((volatile unsigned short *) phys_to_virt(TRAMPOLINE_LOW)) = *low;
}
-#define inquire_remote_apic(apicid) {}
+static inline void inquire_remote_apic(int apicid)
+{
+}
#endif /* __ASM_NUMAQ_WAKECPU_H */
Index: linux-2.6/arch/x86/include/asm/setup.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/setup.h
+++ linux-2.6/arch/x86/include/asm/setup.h
@@ -20,6 +20,7 @@ static inline void visws_early_detect(vo
static inline int is_visws_box(void) { return 0; }
#endif
+extern int wakeup_secondary_cpu_via_nmi(int apicid, unsigned long start_eip);
/*
* Any setup quirks to be performed?
*/
@@ -43,6 +44,7 @@ struct x86_quirks {
void (*smp_read_mpc_oem)(struct mp_config_oemtable *oemtable,
unsigned short oemsize);
int (*setup_ioapic_ids)(void);
+ int (*wakeup_secondary_cpu)(int apicid, unsigned long start_eip);
};
extern struct x86_quirks *x86_quirks;
Index: linux-2.6/arch/x86/kernel/es7000_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/es7000_32.c
+++ linux-2.6/arch/x86/kernel/es7000_32.c
@@ -40,6 +40,7 @@
#include <asm/smp.h>
#include <asm/apicdef.h>
#include <mach_mpparse.h>
+#include <asm/setup.h>
/*
* ES7000 chipsets
@@ -161,6 +162,26 @@ es7000_rename_gsi(int ioapic, int gsi)
return gsi;
}
+#ifdef CONFIG_ES7000_CLUSTERED_APIC
+static int wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip)
+{
+ unsigned long vect = 0, psaival = 0;
+
+ if (psai == NULL)
+ return -1;
+
+ vect = ((unsigned long)__pa(eip)/0x1000) << 16;
+ psaival = (0x1000000 | vect | cpu);
+
+ while (*psai & 0x1000000)
+ ;
+
+ *psai = psaival;
+
+ return 0;
+}
+#endif
+
void __init
setup_unisys(void)
{
@@ -176,6 +197,9 @@ setup_unisys(void)
else
es7000_plat = ES7000_CLASSIC;
ioapic_renumber_irq = es7000_rename_gsi;
+#ifdef CONFIG_ES7000_CLUSTERED_APIC
+ x86_quirks->wakeup_secondary_cpu = wakeup_secondary_cpu_via_mip;
+#endif
}
/*
@@ -317,26 +341,6 @@ es7000_mip_write(struct mip_reg *mip_reg
return status;
}
-int
-es7000_start_cpu(int cpu, unsigned long eip)
-{
- unsigned long vect = 0, psaival = 0;
-
- if (psai == NULL)
- return -1;
-
- vect = ((unsigned long)__pa(eip)/0x1000) << 16;
- psaival = (0x1000000 | vect | cpu);
-
- while (*psai & 0x1000000)
- ;
-
- *psai = psaival;
-
- return 0;
-
-}
-
void __init
es7000_sw_apic(void)
{
Index: linux-2.6/arch/x86/kernel/numaq_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/numaq_32.c
+++ linux-2.6/arch/x86/kernel/numaq_32.c
@@ -250,6 +250,7 @@ static struct x86_quirks numaq_x86_quirk
.mpc_oem_pci_bus = mpc_oem_pci_bus,
.smp_read_mpc_oem = smp_read_mpc_oem,
.setup_ioapic_ids = numaq_setup_ioapic_ids,
+ .wakeup_secondary_cpu = wakeup_secondary_cpu_via_nmi,
};
void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
Index: linux-2.6/arch/x86/kernel/smpboot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/smpboot.c
+++ linux-2.6/arch/x86/kernel/smpboot.c
@@ -62,6 +62,7 @@
#include <asm/mtrr.h>
#include <asm/vmi.h>
#include <asm/genapic.h>
+#include <asm/setup.h>
#include <linux/mc146818rtc.h>
#include <mach_apic.h>
@@ -536,7 +537,7 @@ static void impress_friends(void)
pr_debug("Before bogocount - setting activated=1.\n");
}
-static inline void __inquire_remote_apic(int apicid)
+void __inquire_remote_apic(int apicid)
{
unsigned i, regs[] = { APIC_ID >> 4, APIC_LVR >> 4, APIC_SPIV >> 4 };
char *names[] = { "ID", "VERSION", "SPIV" };
@@ -575,14 +576,13 @@ static inline void __inquire_remote_apic
}
}
-#ifdef WAKE_SECONDARY_VIA_NMI
/*
* Poke the other CPU in the eye via NMI to wake it up. Remember that the normal
* INIT, INIT, STARTUP sequence will reset the chip hard for us, and this
* won't ... remember to clear down the APIC, etc later.
*/
-static int __devinit
-wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
+int __devinit
+wakeup_secondary_cpu_via_nmi(int logical_apicid, unsigned long start_eip)
{
unsigned long send_status, accept_status = 0;
int maxlvt;
@@ -599,7 +599,7 @@ wakeup_secondary_cpu(int logical_apicid,
* Give the other CPU some time to accept the IPI.
*/
udelay(200);
- if (APIC_INTEGRATED(apic_version[phys_apicid])) {
+ if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
maxlvt = lapic_get_maxlvt();
if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
apic_write(APIC_ESR, 0);
@@ -614,11 +614,9 @@ wakeup_secondary_cpu(int logical_apicid,
return (send_status | accept_status);
}
-#endif /* WAKE_SECONDARY_VIA_NMI */
-#ifdef WAKE_SECONDARY_VIA_INIT
static int __devinit
-wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
+wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
{
unsigned long send_status, accept_status = 0;
int maxlvt, num_starts, j;
@@ -737,7 +735,15 @@ wakeup_secondary_cpu(int phys_apicid, un
return (send_status | accept_status);
}
-#endif /* WAKE_SECONDARY_VIA_INIT */
+
+static int __devinit
+wakeup_secondary_cpu(int apicid, unsigned long start_eip)
+{
+ if (x86_quirks->wakeup_secondary_cpu)
+ return x86_quirks->wakeup_secondary_cpu(apicid, start_eip);
+
+ return wakeup_secondary_cpu_via_init(apicid, start_eip);
+}
struct create_idle {
struct work_struct work;
Index: linux-2.6/arch/x86/mach-generic/bigsmp.c
===================================================================
--- linux-2.6.orig/arch/x86/mach-generic/bigsmp.c
+++ linux-2.6/arch/x86/mach-generic/bigsmp.c
@@ -17,6 +17,7 @@
#include <asm/bigsmp/apic.h>
#include <asm/bigsmp/ipi.h>
#include <asm/mach-default/mach_mpparse.h>
+#include <asm/mach-default/mach_wakecpu.h>
static int dmi_bigsmp; /* can be set by dmi scanners */
Index: linux-2.6/arch/x86/mach-generic/default.c
===================================================================
--- linux-2.6.orig/arch/x86/mach-generic/default.c
+++ linux-2.6/arch/x86/mach-generic/default.c
@@ -16,6 +16,7 @@
#include <asm/mach-default/mach_apic.h>
#include <asm/mach-default/mach_ipi.h>
#include <asm/mach-default/mach_mpparse.h>
+#include <asm/mach-default/mach_wakecpu.h>
/* should be called last. */
static int probe_default(void)
Index: linux-2.6/arch/x86/mach-generic/summit.c
===================================================================
--- linux-2.6.orig/arch/x86/mach-generic/summit.c
+++ linux-2.6/arch/x86/mach-generic/summit.c
@@ -16,6 +16,7 @@
#include <asm/summit/apic.h>
#include <asm/summit/ipi.h>
#include <asm/summit/mpparse.h>
+#include <asm/mach-default/mach_wakecpu.h>
static int probe_summit(void)
{
Index: linux-2.6/arch/x86/include/asm/mach-generic/mach_wakecpu.h
===================================================================
--- /dev/null
+++ linux-2.6/arch/x86/include/asm/mach-generic/mach_wakecpu.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_X86_MACH_GENERIC_MACH_WAKECPU_H
+#define _ASM_X86_MACH_GENERIC_MACH_WAKECPU_H
+
+#define TRAMPOLINE_LOW (genapic->trampoline_low)
+#define TRAMPOLINE_HIGH (genapic->trampoline_high)
+#define wait_for_init_deassert (genapic->wait_for_init_deassert)
+#define smp_callin_clear_local_apic (genapic->smp_callin_clear_local_apic)
+#define store_NMI_vector (genapic->store_NMI_vector)
+#define restore_NMI_vector (genapic->restore_NMI_vector)
+#define inquire_remote_apic (genapic->inquire_remote_apic)
+
+#endif /* _ASM_X86_MACH_GENERIC_MACH_APIC_H */
Index: linux-2.6/arch/x86/include/asm/mach-default/smpboot_hooks.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/mach-default/smpboot_hooks.h
+++ linux-2.6/arch/x86/include/asm/mach-default/smpboot_hooks.h
@@ -13,9 +13,9 @@ static inline void smpboot_setup_warm_re
CMOS_WRITE(0xa, 0xf);
local_flush_tlb();
pr_debug("1.\n");
- *((volatile unsigned short *) TRAMPOLINE_HIGH) = start_eip >> 4;
+ *((volatile unsigned short *) phys_to_virt(TRAMPOLINE_HIGH)) = start_eip >> 4;
pr_debug("2.\n");
- *((volatile unsigned short *) TRAMPOLINE_LOW) = start_eip & 0xf;
+ *((volatile unsigned short *) phys_to_virt(TRAMPOLINE_LOW)) = start_eip & 0xf;
pr_debug("3.\n");
}
@@ -32,7 +32,7 @@ static inline void smpboot_restore_warm_
*/
CMOS_WRITE(0, 0xf);
- *((volatile long *) phys_to_virt(0x467)) = 0;
+ *((volatile long *) phys_to_virt(TRAMPOLINE_LOW)) = 0;
}
static inline void __init smpboot_setup_io_apic(void)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists