[ 0.000000] Bootdata ok (command line is root=/dev/cciss/c0d0p5 ro console=ttyS1 console=tty0 quiet splash) [ 0.000000] Linux version 2.6.15-52-amd64-server (buildd@king) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP Wed Aug 20 13:36:39 UTC 2008 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfe54000 (usable) [ 0.000000] BIOS-e820: 00000000dfe54000 - 00000000dfe5c000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dfe5c000 - 00000000dfe5d000 (usable) [ 0.000000] BIOS-e820: 00000000dfe5d000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000011ffff000 (usable) [ 0.000000] ACPI: RSDP (v002 HP ) @ 0x00000000000f4f00 [ 0.000000] ACPI: XSDT (v001 HP ProLiant 0x00000002 Ò 0x0000162e) @ 0x00000000dfe547c0 [ 0.000000] ACPI: FADT (v003 HP ProLiant 0x00000002 Ò 0x0000162e) @ 0x00000000dfe54840 [ 0.000000] ACPI: SPCR (v001 HP SPCRRBSU 0x00000001 Ò 0x0000162e) @ 0x00000000dfe54140 [ 0.000000] ACPI: MCFG (v001 HP ProLiant 0x00000001 0x00000000) @ 0x00000000dfe541c0 [ 0.000000] ACPI: HPET (v001 HP ProLiant 0x00000002 Ò 0x0000162e) @ 0x00000000dfe54200 [ 0.000000] ACPI: SPMI (v005 HP ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000dfe54240 [ 0.000000] ACPI: ERST (v001 HP ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000dfe54280 [ 0.000000] ACPI: MADT (v001 HP ProLiant 0x00000002 0x00000000) @ 0x00000000dfe54480 [ 0.000000] ACPI: FFFF (v001 HP ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000dfe54540 [ 0.000000] ACPI: BERT (v001 HP ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000dfe546c0 [ 0.000000] ACPI: HEST (v001 HP ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000dfe54700 [ 0.000000] ACPI: SSDT (v001 HP SSDTP 0x00000001 INTL 0x20061109) @ 0x00000000dfe59000 [ 0.000000] ACPI: DSDT (v001 HP DSDT 0x00000001 INTL 0x20061109) @ 0x0000000000000000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000011ffff000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000011ffff000 [ 0.000000] On node 0 totalpages: 1030978 [ 0.000000] DMA zone: 2997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 898701 pages, LIFO batch:31 [ 0.000000] Normal zone: 129280 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages, LIFO batch:0 [ 0.000000] ACPI: PM-Timer IO Port: 0x908 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) [ 0.000000] Processor #6 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] Processor #7 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at f1000000 (gap: f0000000:ec00000) [ 0.000000] Checking aperture... [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] Built 1 zonelists [ 0.000000] Kernel command line: root=/dev/cciss/c0d0p5 ro console=ttyS1 console=tty0 quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes) [ 0.000000] time.c: Using 14.318180 MHz HPET timer. [ 0.000000] time.c: Detected 2333.420 MHz processor. [ 82.838254] Console: colour VGA+ 80x25 [ 82.840116] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 82.842153] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 82.842437] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 82.872444] Placing software IO TLB between 0x5580000 - 0x9580000 [ 82.904749] Memory: 4044144k/4718588k available (2116k kernel code, 148060k reserved, 807k data, 180k init) [ 82.984676] Calibrating delay using timer specific routine.. 4671.05 BogoMIPS (lpj=9342101) [ 82.984720] Security Framework v1.0.0 initialized [ 82.984725] SELinux: Disabled at boot. [ 82.984751] Mount-cache hash table entries: 256 [ 82.984860] CPU: L1 I cache: 32K, L1 D cache: 32K [ 82.984862] CPU: L2 cache: 4096K [ 82.984864] using mwait in idle threads. [ 82.984866] CPU: Physical Processor ID: 0 [ 82.984867] CPU: Processor Core ID: 0 [ 82.984869] MCE: warning: using only 6 banks [ 82.984874] CPU0: Thermal monitoring enabled (TM2) [ 82.984877] mtrr: v2.0 (20020519) [ 82.984979] checking if image is initramfs... it is [ 83.509232] Freeing initrd memory: 7141k freed [ 83.513266] ACPI: Looking for DSDT ... not found! [ 83.555506] activating NMI Watchdog ... done. [ 83.555512] Using local APIC timer interrupts. [ 83.598287] Detected 20.834 MHz APIC timer. [ 83.598417] Booting processor 1/4 APIC 0x6 [ 83.608963] Initializing CPU#1 [ 83.687326] Calibrating delay using timer specific routine.. 4666.97 BogoMIPS (lpj=9333950) [ 83.687334] CPU: L1 I cache: 32K, L1 D cache: 32K [ 83.687335] CPU: L2 cache: 4096K [ 83.687338] CPU: Physical Processor ID: 3 [ 83.687339] CPU: Processor Core ID: 0 [ 83.687341] MCE: warning: using only 6 banks [ 83.687346] CPU1: Thermal monitoring enabled (TM2) [ 83.687806] Intel(R) Xeon(R) CPU 5140 @ 2.33GHz stepping 06 [ 83.687813] APIC error on CPU1: 00(40) [ 83.687820] CPU 1: Syncing TSC to CPU 0. [ 83.687983] CPU 1: synchronized TSC with CPU 0 (last diff 3 cycles, maxerr 1029 cycles) [ 83.688060] Booting processor 2/4 APIC 0x1 [ 83.699558] Initializing CPU#2 [ 83.779149] Calibrating delay using timer specific routine.. 4666.95 BogoMIPS (lpj=9333919) [ 83.779158] CPU: L1 I cache: 32K, L1 D cache: 32K [ 83.779160] CPU: L2 cache: 4096K [ 83.779162] CPU: Physical Processor ID: 0 [ 83.779163] CPU: Processor Core ID: 1 [ 83.779165] MCE: warning: using only 6 banks [ 83.779170] CPU2: Thermal monitoring enabled (TM2) [ 83.779630] Intel(R) Xeon(R) CPU 5140 @ 2.33GHz stepping 06 [ 83.779637] APIC error on CPU2: 00(40) [ 83.779644] CPU 2: Syncing TSC to CPU 0. [ 83.779740] CPU 2: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 567 cycles) [ 83.779847] Booting processor 3/4 APIC 0x7 [ 83.792133] Initializing CPU#3 [ 83.870974] Calibrating delay using timer specific routine.. 4666.98 BogoMIPS (lpj=9333974) [ 83.870982] CPU: L1 I cache: 32K, L1 D cache: 32K [ 83.870984] CPU: L2 cache: 4096K [ 83.870986] CPU: Physical Processor ID: 3 [ 83.870988] CPU: Processor Core ID: 1 [ 83.870990] MCE: warning: using only 6 banks [ 83.870994] CPU3: Thermal monitoring enabled (TM2) [ 83.871456] Intel(R) Xeon(R) CPU 5140 @ 2.33GHz stepping 06 [ 83.871463] APIC error on CPU3: 00(40) [ 83.871471] CPU 3: Syncing TSC to CPU 0. [ 83.871634] CPU 3: synchronized TSC with CPU 0 (last diff 3 cycles, maxerr 1029 cycles) [ 83.871642] Brought up 4 CPUs [ 83.871679] time.c: Using HPET/TSC based timekeeping. [ 83.871681] testing NMI watchdog ... OK. [ 83.912003] NET: Registered protocol family 16 [ 83.912025] ACPI: bus type pci registered [ 83.912030] PCI: Using configuration type 1 [ 83.916659] PCI: Using MMCONFIG at e0000000 [ 83.917342] ACPI: Subsystem revision 20051216 [ 83.918769] ACPI: Interpreter enabled [ 83.918771] ACPI: Using IOAPIC for interrupt routing [ 83.919157] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 83.919160] PCI: Probing PCI hardware (bus 00) [ 83.919181] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [ 83.920367] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [ 83.929620] Boot video device is 0000:01:03.0 [ 83.929845] PCI: Transparent bridge - 0000:00:1e.0 [ 83.929881] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 83.931822] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] [ 83.932030] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPTA._PRT] [ 83.932138] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02._PRT] [ 83.932228] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.PEX2._PRT] [ 83.932498] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4._PRT] [ 83.932620] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE1._PRT] [ 83.933011] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE2._PRT] [ 83.933406] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT04._PRT] [ 83.933824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT05.EEPB._PRT] [ 83.933931] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT05.EEPB.EPPB._PRT] [ 83.934978] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11) [ 83.935138] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11) [ 83.935290] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11) [ 83.935443] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11) [ 83.935594] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled. [ 83.935746] ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11) [ 83.935897] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11) [ 83.936048] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11) [ 83.936162] Linux Plug and Play Support v0.97 (c) Adam Belay [ 83.936169] pnp: PnP ACPI init [ 83.937354] pnp: PnP ACPI: found 10 devices [ 83.937364] PCI: Using ACPI for IRQ routing [ 83.937366] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 83.937572] hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0 [ 83.937575] hpet0: 3 64-bit timers, 14318180 Hz [ 83.938715] pnp: 00:00: ioport range 0x408-0x40f has been reserved [ 83.938718] pnp: 00:00: ioport range 0x4d0-0x4d1 has been reserved [ 83.938720] pnp: 00:00: ioport range 0x700-0x71f has been reserved [ 83.939025] PCI: Bridge: 0000:05:00.0 [ 83.939026] IO window: disabled. [ 83.939100] MEM window: disabled. [ 83.939146] PREFETCH window: disabled. [ 83.939237] PCI: Bridge: 0000:05:01.0 [ 83.939238] IO window: disabled. [ 83.939329] MEM window: disabled. [ 83.939375] PREFETCH window: disabled. [ 83.939466] PCI: Bridge: 0000:04:00.0 [ 83.939467] IO window: disabled. [ 83.939557] MEM window: disabled. [ 83.939603] PREFETCH window: disabled. [ 83.939694] PCI: Bridge: 0000:04:00.3 [ 83.939695] IO window: disabled. [ 83.939786] MEM window: disabled. [ 83.939832] PREFETCH window: disabled. [ 83.939923] PCI: Bridge: 0000:00:02.0 [ 83.939924] IO window: disabled. [ 83.939926] MEM window: fdd00000-fddfffff [ 83.939927] PREFETCH window: disabled. [ 83.939929] PCI: Bridge: 0000:00:03.0 [ 83.939930] IO window: disabled. [ 83.939932] MEM window: disabled. [ 83.939933] PREFETCH window: disabled. [ 83.939935] PCI: Bridge: 0000:00:04.0 [ 83.939936] IO window: disabled. [ 83.939938] MEM window: disabled. [ 83.939939] PREFETCH window: disabled. [ 83.939943] PCI: Bridge: 0000:13:04.0 [ 83.939944] IO window: 5000-5fff [ 83.939948] MEM window: fdf00000-fdffffff [ 83.939950] PREFETCH window: f8000000-f83fffff [ 83.939953] PCI: Bridge: 0000:12:00.0 [ 83.939955] IO window: 4000-5fff [ 83.939958] MEM window: fde00000-fdffffff [ 83.939961] PREFETCH window: f8000000-f85fffff [ 83.939963] PCI: Bridge: 0000:00:05.0 [ 83.939965] IO window: 4000-5fff [ 83.939967] MEM window: fde00000-fdffffff [ 83.939969] PREFETCH window: f8000000-f85fffff [ 83.939971] PCI: Bridge: 0000:02:00.0 [ 83.939972] IO window: disabled. [ 83.939976] MEM window: fa000000-fbffffff [ 83.939979] PREFETCH window: f8600000-f86fffff [ 83.939983] PCI: Bridge: 0000:00:1c.0 [ 83.939984] IO window: disabled. [ 83.939987] MEM window: fa000000-fbffffff [ 83.939990] PREFETCH window: f8600000-f86fffff [ 83.939994] PCI: Bridge: 0000:00:1e.0 [ 83.939995] IO window: 2000-3fff [ 83.939998] MEM window: f9e00000-f9ffffff [ 83.940001] PREFETCH window: f0000000-f7ffffff [ 83.940008] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 83.940243] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 83.940564] GSI 16 sharing vector 0xA9 and IRQ 16 [ 83.940567] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 83.940609] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 83.940929] GSI 17 sharing vector 0xB1 and IRQ 17 [ 83.940931] ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 17 (level, low) -> IRQ 177 [ 83.940975] PCI: Setting latency timer of device 0000:05:01.0 to 64 [ 83.941294] PCI: Setting latency timer of device 0000:04:00.3 to 64 [ 83.941343] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 83.941347] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 83.941351] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 83.941361] PCI: Setting latency timer of device 0000:12:00.0 to 64 [ 83.941376] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 83.941380] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 83.941395] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 83.941402] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 83.942208] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ [ 83.942647] audit: initializing netlink socket (disabled) [ 83.942661] audit(1223223322.104:1): initialized [ 83.942889] VFS: Disk quotas dquot_6.5.1 [ 83.942907] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 83.942969] Initializing Cryptographic API [ 83.942973] io scheduler noop registered [ 83.942981] io scheduler anticipatory registered [ 83.942989] io scheduler deadline registered [ 83.943010] io scheduler cfq registered [ 83.961690] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 83.961694] pcie_portdrv_probe->Dev[25f7:8086] has invalid IRQ. Check vendor BIOS [ 83.961715] assign_interrupt_mode Found MSI capability [ 83.961761] Allocate Port Service[pcie00] [ 83.961805] Allocate Port Service[pcie01] [ 83.961845] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 83.961847] pcie_portdrv_probe->Dev[25e3:8086] has invalid IRQ. Check vendor BIOS [ 83.961860] assign_interrupt_mode Found MSI capability [ 83.961876] Allocate Port Service[pcie00] [ 83.961909] Allocate Port Service[pcie01] [ 83.961945] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 83.961947] pcie_portdrv_probe->Dev[25e4:8086] has invalid IRQ. Check vendor BIOS [ 83.961960] assign_interrupt_mode Found MSI capability [ 83.961976] Allocate Port Service[pcie00] [ 83.962011] Allocate Port Service[pcie01] [ 83.962057] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 83.962059] pcie_portdrv_probe->Dev[25e5:8086] has invalid IRQ. Check vendor BIOS [ 83.962071] assign_interrupt_mode Found MSI capability [ 83.962086] Allocate Port Service[pcie00] [ 83.962128] Allocate Port Service[pcie01] [ 83.962170] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 83.962174] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 83.962198] assign_interrupt_mode Found MSI capability [ 83.962225] Allocate Port Service[pcie00] [ 83.962275] Allocate Port Service[pcie03] [ 83.962448] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 83.962493] pcie_portdrv_probe->Dev[3500:8086] has invalid IRQ. Check vendor BIOS [ 83.963316] Allocate Port Service[pcie10] [ 83.963359] Allocate Port Service[pcie11] [ 83.963600] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 83.963636] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 83.964504] assign_interrupt_mode Found MSI capability [ 83.965419] Allocate Port Service[pcie20] [ 83.965461] Allocate Port Service[pcie21] [ 83.965602] ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 17 (level, low) -> IRQ 177 [ 83.965648] PCI: Setting latency timer of device 0000:05:01.0 to 64 [ 83.966515] assign_interrupt_mode Found MSI capability [ 83.967430] Allocate Port Service[pcie20] [ 83.967474] Allocate Port Service[pcie21] [ 83.985215] Real Time Clock Driver v1.12 [ 83.985331] hpet_resources: 0xfed00000 is busy [ 83.985340] Linux agpgart interface v0.101 (c) Dave Jones [ 83.985457] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 83.997983] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 83.998912] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 83.998915] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [ 83.999061] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 83.999142] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 84.001013] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 84.001598] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 84.001648] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 84.001651] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 84.001839] mice: PS/2 mouse device common for all mice [ 84.003840] NET: Registered protocol family 2 [ 84.058400] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 84.058851] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 84.062108] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 84.062640] TCP: Hash tables configured (established 262144 bind 65536) [ 84.062642] TCP reno registered [ 84.062757] TCP bic registered [ 84.062768] NET: Registered protocol family 1 [ 84.062774] NET: Registered protocol family 8 [ 84.062775] NET: Registered protocol family 20 [ 84.062882] ACPI wakeup devices: [ 84.062883] PCI0 [ 84.062885] ACPI: (supports S0 S4 S5) [ 84.063043] Freeing unused kernel memory: 180k freed [ 84.096385] vga16fb: initializing [ 84.096388] vga16fb: mapped to 0xffff8100000a0000 [ 84.157151] input: AT Translated Set 2 keyboard as /class/input/input0 [ 84.343416] Console: switching to colour frame buffer device 80x25 [ 84.343419] fb0: VGA16 VGA frame buffer device [ 84.351250] Capability LSM initialized [ 84.376998] ACPI: Thermal Zone [THM0] (8 C) [ 84.659532] SCSI subsystem initialized [ 84.660131] Fusion MPT base driver 3.03.04 [ 84.660133] Copyright (c) 1999-2005 LSI Logic Corporation [ 84.661558] Fusion MPT SPI Host driver 3.03.04 [ 84.661603] GSI 18 sharing vector 0x3A and IRQ 18 [ 84.661606] ACPI: PCI Interrupt 0000:14:01.0[A] -> GSI 19 (level, low) -> IRQ 58 [ 84.661627] mptbase: Initiating ioc0 bringup [ 85.132854] ioc0: 53C1030: Capabilities={Initiator,Target} [ 85.442222] scsi0 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=58 [ 86.191419] Vendor: HP Model: C7438A Rev: ZP76 [ 86.191429] Type: Sequential-Access ANSI SCSI revision: 03 [ 89.007659] HP CISS Driver (v 2.6.8) [ 89.007685] cciss: Device 0x3238 has been found at bus 19 dev 8 func 0 [ 89.007721] ACPI: PCI Interrupt 0000:13:08.0[A] -> GSI 19 (level, low) -> IRQ 58 [ 89.049083] cciss: using DAC cycles [ 89.061180] blocks= 143305920 block_size= 512 [ 89.065213] heads= 255, sectors= 32, cylinders= 17562 [ 89.065214] [ 89.065401] blocks= 143305920 block_size= 512 [ 89.065512] heads= 255, sectors= 32, cylinders= 17562 [ 89.065513] [ 89.065517] cciss/c0d0: p1 p2 p3 < p5 p6 p7 p8 p9 > [ 89.328012] ESB2: IDE controller at PCI slot 0000:00:1f.1 [ 89.328021] ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSI - using IRQ 7 [ 89.328033] ESB2: chipset revision 9 [ 89.328034] ESB2: not 100% native mode: will probe irqs later [ 89.328042] ide0: BM-DMA at 0x0500-0x0507, BIOS settings: hda:DMA, hdb:pio [ 89.328054] ide1: BM-DMA at 0x0508-0x050f, BIOS settings: hdc:pio, hdd:pio [ 89.328062] Probing IDE interface ide0... [ 90.064101] hda: HL-DT-STDVD+-RW GSA-H21L, ATAPI CD/DVD-ROM drive [ 90.399532] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 90.399572] Probing IDE interface ide1... [ 90.975016] hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [ 90.975022] Uniform CD-ROM driver Revision: 3.20 [ 91.012776] usbcore: registered new driver usbfs [ 91.012791] usbcore: registered new driver hub [ 91.013416] USB Universal Host Controller Interface driver v2.3 [ 91.013464] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 91.013473] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 91.013476] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 91.013774] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 91.013782] uhci_hcd 0000:00:1d.0: irq 169, io base 0x00001000 [ 91.013855] hub 1-0:1.0: USB hub found [ 91.013861] hub 1-0:1.0: 2 ports detected [ 91.118534] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177 [ 91.118544] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 91.118548] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 91.118584] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 91.118596] uhci_hcd 0000:00:1d.1: irq 177, io base 0x00001020 [ 91.118686] hub 2-0:1.0: USB hub found [ 91.118692] hub 2-0:1.0: 2 ports detected [ 91.223486] GSI 19 sharing vector 0x42 and IRQ 19 [ 91.223490] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 66 [ 91.223495] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 91.223498] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 91.223536] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 91.223543] uhci_hcd 0000:00:1d.2: irq 66, io base 0x00001040 [ 91.223613] hub 3-0:1.0: USB hub found [ 91.223618] hub 3-0:1.0: 2 ports detected [ 91.328678] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 58 [ 91.328684] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 91.328687] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 91.328719] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 91.328724] uhci_hcd 0000:00:1d.3: irq 58, io base 0x00001060 [ 91.328795] hub 4-0:1.0: USB hub found [ 91.328800] hub 4-0:1.0: 2 ports detected [ 91.433784] GSI 20 sharing vector 0x4A and IRQ 20 [ 91.433786] ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 22 (level, low) -> IRQ 74 [ 91.433793] uhci_hcd 0000:01:04.4: UHCI Host Controller [ 91.433803] uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports [ 91.434696] uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 5 [ 91.434702] uhci_hcd 0000:01:04.4: irq 74, io base 0x00003800 [ 91.434704] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 169 [ 91.436330] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 91.436335] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 91.436375] ehci_hcd 0000:00:1d.7: debug port 1 [ 91.436380] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 91.436411] hub 5-0:1.0: USB hub found [ 91.436419] hub 5-0:1.0: 2 ports detected [ 91.538797] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6 [ 91.538805] ehci_hcd 0000:00:1d.7: irq 169, io mem 0xf9df0000 [ 91.542673] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 91.542745] hub 6-0:1.0: USB hub found [ 91.542751] hub 6-0:1.0: 8 ports detected [ 91.661522] Probing IDE interface ide1... [ 91.777144] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 92.171454] usb 5-2: new full speed USB device using uhci_hcd and address 3 [ 92.322585] hub 5-2:1.0: USB hub found [ 92.325794] hub 5-2:1.0: 7 ports detected [ 92.449817] usbcore: registered new driver hiddev [ 92.456316] input: HP Virtual Keyboard as /class/input/input1 [ 92.456324] input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1 [ 92.462760] input: HP Virtual Keyboard as /class/input/input2 [ 92.462772] input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1 [ 92.462778] usbcore: registered new driver usbhid [ 92.462780] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 92.485347] Attempting manual resume [ 92.490003] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 92.490251] SGI XFS Quota Management subsystem [ 92.491361] XFS mounting filesystem cciss/c0d0p5 [ 92.554316] Ending clean XFS mount for filesystem: cciss/c0d0p5 [ 93.443420] ts: Compaq touchscreen protocol output [ 93.465883] st: Version 20050830, fixed bufsize 32768, s/g segs 256 [ 93.465985] st 0:0:3:0: Attached scsi tape st0<4>st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA 1179647 [ 93.476263] st 0:0:3:0: Attached scsi generic sg0 type 1 [ 93.834234] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 93.841689] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 94.011531] input: PC Speaker as /class/input/input3 [ 94.016056] hw_random hardware driver 1.0.0 loaded [ 94.020853] Floppy drive(s): fd0 is 1.44M [ 94.025928] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.4.30 (October 11, 2005) [ 94.025951] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169 [ 94.027405] eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 169, node addr 0019bb35501e [ 94.170866] bnx2: eth0: using MSI [ 97.036527] floppy0: no floppy controllers found [ 97.157699] lp: driver loaded but no devices found [ 97.187872] netconsole: local port 6665 [ 97.187875] netconsole: interface eth0 [ 97.187877] netconsole: remote port 514 [ 97.187879] netconsole: remote IP 192.168.120.3 [ 97.187881] netconsole: remote ethernet address 00:e0:18:5b:e2:7b [ 97.187885] netconsole: local IP 192.168.120.1 [ 97.196225] netconsole: network logging started [ 97.248145] Adding 2000084k swap on /dev/cciss/c0d0p2. Priority:-1 extents:1 across:2000084k [ 97.351084] bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON [ 97.371859] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [ 97.371862] md: bitmap version 4.39 [ 97.569823] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com [ 97.846475] cdrom: open failed. [ 98.255570] kjournald starting. Commit interval 5 seconds [ 98.255699] EXT3 FS on cciss/c0d0p1, internal journal [ 98.255704] EXT3-fs: mounted filesystem with ordered data mode. [ 98.256906] XFS mounting filesystem cciss/c0d0p9 [ 98.347776] Ending clean XFS mount for filesystem: cciss/c0d0p9 [ 98.358369] XFS mounting filesystem cciss/c0d0p6 [ 98.423140] Ending clean XFS mount for filesystem: cciss/c0d0p6 [ 98.432706] XFS mounting filesystem cciss/c0d0p7 [ 98.497717] Ending clean XFS mount for filesystem: cciss/c0d0p7 [ 98.507407] XFS mounting filesystem cciss/c0d0p8 [ 98.592454] Ending clean XFS mount for filesystem: cciss/c0d0p8 [ 99.063872] NET: Registered protocol family 10 [ 99.063989] lo: Disabled Privacy Extensions [ 99.064093] IPv6 over IPv4 tunneling driver [ 101.318108] tun: Universal TUN/TAP device driver, 1.6 [ 101.318112] tun: (C) 1999-2004 Max Krasnyansky [ 109.631635] eth0: no IPv6 routers present