| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 16 Jan 2009 14:57:52 +0100
From: seved@...insight.net
To: linux-kernel@...r.kernel.org
Cc: seved@...insight.net
Subject: next command started before previously called script is finished
Summary: next command started before previously called script is finished
bashbug:
--------
Configuration Information [Automatically generated, do not change]:
Machine: x86_64
OS: linux-gnu
Compiler: gcc
Compilation CFLAGS: -DPROGRAM='bash' -DCONF_HOSTTYPE='x86_64' -DCONF_OSTYPE='linux-gnu' -DCONF_MACHTYPE='x86_64-pc-linux-gnu' -DCONF_VENDOR='pc' -DLOCALEDIR='/usr/share/locale' -DPACKAGE='bash' -DSHELL -DHAVE_CONFIG_H -I. -I../bash -I../bash/include -I../bash/lib -g -O2
uname output: Linux jessie 2.6.18-5-amd64 #1 SMP Sat Dec 22 20:43:59 UTC 2007 x86_64 GNU/Linux
Machine Type: x86_64-pc-linux-gnu
Bash Version: 3.1
Patch Level: 17
Release Status: release
ver_linux:
----------
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux jessie 2.6.24-etchnhalf.1-amd64 #1 SMP Tue Oct 14 03:11:45 UTC 2008 x86_64 GNU/Linux
Gnu C 4.1.2
Gnu make 3.81
binutils 2.17
util-linux 2.12r
mount 2.12r
module-init-tools 3.3-pre2
e2fsprogs 1.40-WIP
Linux C Library 2.3.6
Dynamic linker (ldd) 2.3.6
Procps 3.2.7
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.97
udev 105
Modules Loaded nfsd auth_rpcgss exportfs ppdev parport_pc lp parport autofs4 ac battery nfs lockd nfs_acl sunrpc ipv6 dm_snapshot dm_mirror dm_mod loop iTCO_wdt i2c_i801 i2c_core sg button sky2 pcspkr sr_mod evdev cdrom ext3 jbd mbcache raid1 md_mod ide_generic sd_mod generic piix ide_core ata_generic ahci libata scsi_mod ehci_hcd uhci_hcd thermal processor fan
Description:
This error is very hard to reproduce. It happens in the innermost loop
in nightly jobs. Four jobs run in parallel and three of them will pass this
point around 800 times each night, the fourth job only about 100 times.
The error happens about once every second week, i.e. about once out of
50000 times. The data supplied below was collected two months ago but
similar reports have been generated on Nov 17th, Dec 1st, Dec 17th, Jan 2nd
and Jan 15th.
The main script contains two nested for loops and each time a function do_build
is called. do_build creates a directory /tmp/build.nnnn and 'cd' into it.
A separate script is called to setup some needed files including a Makefile
and then 'make info' is performed.
Normally this works fine but in rare cases when do_build continues the files
are not yet created. Either the setup script has not finished (error in the
kernel or in bash?) or the directory inode is not yet updated (error in
the kernel?). Of course the 'make info' fails when there is no Makefile!
It has taken some time to understand what happens but now some data are
collected and sent to me when 'make info' fails.
Earlier the second 'make' also failed but during the data collection job
the files appear and the second 'make' is now successful.
The build machine has 4 CPUs and 4GB RAM, see info at the bottom.
##########################################################################
# function do_build ()
function do_build ()
{
# called with ARG1 = modulename ARG2 = configuration file ARG3 = logname
cd $SOURCE_AREA
test -d /tmp/build.$$ && mv /tmp/build.$$ /tmp/build.$$.old
rm -rf /tmp/build.$$.old
mkdir /tmp/build.$$
cd /tmp/build.$$
echo -n "Building $1 for $2 in `pwd` on "
date
nsetup=$SOURCE_AREA/mksupp/nsetup.sh
ln -s $SOURCE_AREA/$1 .
SOURCE_AREA=. $nsetup -q $2
make info > $3 2>&1
if [ $? -ne 0 ]; then
lsres=`ls -ld ./* /tmp/b* 2>&1`
wdnow=`pwd 2>&1`
pstree=`ps fx`
mail -s 'make info failed' seved@...insight.se <<EOF
Module: $1
Config file: $2
Branch: $ver
Build area: /tmp/build.$$
pwd: $wdnow
pstree: $pstree
ls -ld ./* /tmp/b* :
$lsres
EOF
fi
## more job including 'make all'
}
########################################################################
Resulting mail. N.B. 'ls' reports only one file, the newly created symlink,
and the 'ps fx' result (pstree:) shows that the main script build_node.sh,
pid 23678, has 2 (TWO!) children: pid 23986 running nsetup and pid 24001
running 'ps fx' and 24001 has thus performed 'make info' which failed.
To: seved@...insight.se
Subject: make info failed
Message-Id: <E1KzNUz-0006FX-N0@...alhost>
From: iovbuild@...insight.se
Date: Mon, 10 Nov 2008 04:31:33 +0100
Module: ark-gpio
Config file: /lhome/iovbuild/source_i386/head/sw/configs/nimbra680_debug.config
Branch: head
Build area: /tmp/build.23678
pwd: /tmp/build.23678
pstree: PID TTY STAT TIME COMMAND
29554 ? Ss 0:00 /bin/bash -c /home/iovbuild/tools/nightly/build --arch arm -x testing iris head dev_ethernetff > /lhome/iovbuild/test/arm.log 2>&1
29562 ? S 0:00 \_ /bin/bash /home/iovbuild/tools/nightly/build --arch arm -x testing iris head dev_ethernetff
2751 ? S 0:00 \_ /bin/sh /home/iovbuild/tools/nightly/build_node.sh -x --branches head --increment nimbra340
3265 ? R 0:17 \_ cvs -qf -z 3 get -P sw/adt sw/alarm sw/base-files sw/base-files-nimbra300 sw/busybox sw/ccm sw/chm sw/crc sw/dcc sw/dcp sw/ddns sw/difinfo sw/dispatcher sw/dle sw/dlsp sw/dlsp_oam sw/dpeek sw/dscp-cmd sw/dsync sw/dsyp sw/dtm-if sw/dtm_addr sw/dtm_route sw/dtmd sw/dxl sw/dxl-if sw/eqm sw/eth-if sw/ethconf sw/ethtool sw/ets sw/event sw/flow sw/glibc sw/gpio sw/inetutils sw/inventory sw/ipconf sw/iptables sw/ism-bus sw/ism-dsync sw/ism-dxl sw/ism-eth sw/ism-gpio sw/ism-hal-iad sw/ism-hal-if sw/ism-mau sw/ism-ncb sw/ism-switch sw/ism-unknown sw/its sw/kernel sw/lurix sw/mibs sw/misc sw/module-init-tools sw/mtd-utils sw/nano sw/nb-syslog sw/nc-status sw/ncall sw/ncurses sw/netilib sw/netkit sw/ntp sw/oam sw/ooc sw/pest sw/plog-utils sw/pmm sw/protocol-mgr sw/rcmd sw/registry sw/rm sw/rst sw/sarq sw/slot sw/slot0-channel sw/snmp sw/snmp-if sw/sqc sw/supd sw/swap sw/sysklogd sw/sysvars sw/tim sw/tim-if sw/tnrm sw/ttf sw/twofish sw/tz sw/udev sw/web sw/zlib sw/nimbra340-dtm-base sw/nimbra340-os-base sw/nodemgmt sw/test-tools sw/configs
23664 ? Ss 0:00 /bin/bash -c /home/iovbuild/tools/nightly/build --arch i386 -x testing iris head dev_ethernetff > /lhome/iovbuild/test/i386.log 2>&1
23666 ? S 0:00 \_ /bin/bash /home/iovbuild/tools/nightly/build --arch i386 -x testing iris head dev_ethernetff
23678 ? S 0:06 \_ /bin/sh /home/iovbuild/tools/nightly/build_node.sh -x --branches testing iris head dev_ethernetff nimbra680
23986 ? R 0:00 \_ /bin/bash /lhome/iovbuild/source_i386/head/sw/mksupp/nsetup.sh -q /lhome/iovbuild/source_i386/head/sw/configs/nimbra680_debug.config
24001 ? R 0:00 \_ ps fx
ls -ld ./* /tmp/b* :
lrwxrwxrwx 1 iovbuild iovbuild 44 2008-11-10 04:31 ./ark-gpio -> /lhome/iovbuild/source_i386/head/sw/ark-gpio
drwxr-xr-x 6 labbon users 120 2008-10-21 12:42 /tmp/b_tst
drwxr-xr-x 4 seved users 260 2008-11-07 15:04 /tmp/build.11287
drwxr-xr-x 2 seved users 120 2008-11-07 15:00 /tmp/build.12360
drwxrwxr-x 7 iovbuild iovbuild 300 2008-10-31 01:33 /tmp/build.13412
drwxrwxr-x 7 iovbuild iovbuild 300 2008-10-31 01:14 /tmp/build.14263
drwxrwxr-x 7 iovbuild iovbuild 300 2008-10-31 01:24 /tmp/build.1488
drwxr-xr-x 4 seved users 260 2008-11-07 15:08 /tmp/build.15704
drwxrwxr-x 7 iovbuild iovbuild 300 2008-10-31 01:27 /tmp/build.17242
drwxrwxr-x 7 seved users 280 2008-11-01 14:43 /tmp/build.1746
drwxrwxr-x 7 seved users 300 2008-10-31 11:42 /tmp/build.18657
drwxrwxr-x 7 iovbuild iovbuild 300 2008-10-31 01:22 /tmp/build.2178
drwxrwxr-x 2 iovbuild iovbuild 60 2008-11-10 04:31 /tmp/build.23678
drwxr-xr-x 4 seved users 260 2008-11-07 15:05 /tmp/build.23830
drwxrwxr-x 7 iovbuild iovbuild 300 2008-10-31 01:19 /tmp/build.24058
drwxr-xr-x 2 seved users 120 2008-11-07 15:02 /tmp/build.27328
drwxrwxr-x 7 iovbuild iovbuild 300 2008-10-31 01:30 /tmp/build.29646
drwxrwxr-x 7 iovbuild iovbuild 300 2008-10-31 01:32 /tmp/build.7778
drwxr-xr-x 4 seved users 260 2008-11-07 15:08 /tmp/build.9048
#########################################################################################
# cpuinfo and meminfo
jessie:~> cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
stepping : 11
cpu MHz : 2400.092
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm
bogomips : 4804.35
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
stepping : 11
cpu MHz : 2400.092
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 4
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm
bogomips : 4800.18
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
stepping : 11
cpu MHz : 2400.092
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 4
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm
bogomips : 4800.19
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
stepping : 11
cpu MHz : 2400.092
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm
bogomips : 4800.45
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
jessie:~> cat /proc/meminfo
MemTotal: 8184084 kB
MemFree: 80584 kB
Buffers: 1954152 kB
Cached: 817544 kB
SwapCached: 0 kB
Active: 1278720 kB
Inactive: 1564872 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 8184084 kB
LowFree: 80584 kB
SwapTotal: 9767512 kB
SwapFree: 6234136 kB
Dirty: 136 kB
Writeback: 0 kB
AnonPages: 72264 kB
Mapped: 20320 kB
Slab: 5190856 kB
PageTables: 5592 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
CommitLimit: 13859552 kB
Committed_AS: 3837324 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 4976 kB
VmallocChunk: 34359733379 kB
jessie:~>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists