| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 18 Jan 2009 16:41:52 +0300
From: Andrey Borzenkov <arvidjaar@...l.ru>
To: linux-kernel@...r.kernel.org
Subject: [2.6.29-rc2] Inconsistent lock state on resume in hres_timers_resume
at least, I think it is somewhere in hrt path. Previous resume resulted in
black screen with dead system, so warning seems real. Full dmesg follows; I
attach config as well.
[ 0.000000] Linux version 2.6.29-rc2-1avb (bor@...ker) (gcc version 4.3.2
(GCC) ) #1 Sat Jan 17 17:39:44 MSK 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] PAT WC disabled due to known CPU erratum.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
[ 0.000000] BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ef60000 (usable)
[ 0.000000] BIOS-e820: 000000001ef60000 - 000000001ef70000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ef70000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x1ef60 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 1ef60000 @ 7000-d000
[ 0.000000] RAMDISK: 1ebcf000 - 1ef4f86c
[ 0.000000] ACPI: RSDP 000F0090, 0014 (r0 TOSHIB)
[ 0.000000] ACPI: RSDT 1EF60000, 0028 (r1 TOSHIB 750 970814 TASM
4010000)
[ 0.000000] ACPI: FACP 1EF60054, 0084 (r2 TOSHIB 750 970814 TASM
4010000)
[ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match
PM1_EVT_LEN (4)
[ 0.000000] ACPI: DSDT 1EF600D8, 68DA (r1 TOSHIB 4000 20020417 MSFT
100000A)
[ 0.000000] ACPI: FACS 000EEE00, 0040
[ 0.000000] 495MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1ef60000
[ 0.000000] low ram: 00000000 - 1ef60000
[ 0.000000] bootmap 00001000 - 00004dec
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 001ef60000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000100000 - 0000973d98] TEXT DATA BSS ==>
[0000100000 - 0000973d98]
[ 0.000000] #2 [001ebcf000 - 001ef4f86c] RAMDISK ==>
[001ebcf000 - 001ef4f86c]
[ 0.000000] #3 [0000974000 - 0000978000] INIT_PG_TABLE ==>
[0000974000 - 0000978000]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==>
[000009fc00 - 0000100000]
[ 0.000000] #5 [0000007000 - 0000009000] PGTABLE ==>
[0000007000 - 0000009000]
[ 0.000000] #6 [0000001000 - 0000005000] BOOTMAP ==>
[0000001000 - 0000005000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001ef60
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001ef60
[ 0.000000] On node 0 totalpages: 126719
[ 0.000000] free_area_init_node: node 0, pgdat c03caa00, node_mem_map
c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 959 pages used for memmap
[ 0.000000] Normal zone: 121761 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xee08
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
00000000000ee000
[ 0.000000] PM: Registered nosave memory: 00000000000ee000 -
00000000000ef000
[ 0.000000] PM: Registered nosave memory: 00000000000ef000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap:
20000000:dff80000)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 125728
[ 0.000000] Kernel command line: BOOT_IMAGE=2.6.29-rc2-1avb root=LABEL=/
resume=LABEL=swap acpi_backlight=vendor
netconsole=@...0.0.1/eth0,@10.0.0.2/00:17:42:21:27:e4 vga=791
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] CPU 0 irqstacks, hard=c0414000 soft=c0413000
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 747.727 MHz processor.
[ 0.003333] Console: colour dummy device 80x25
[ 0.003333] console [tty0] enabled
[ 0.003333] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc.,
Ingo Molnar
[ 0.003333] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.003333] ... MAX_LOCK_DEPTH: 48
[ 0.003333] ... MAX_LOCKDEP_KEYS: 8191
[ 0.003333] ... CLASSHASH_SIZE: 4096
[ 0.003333] ... MAX_LOCKDEP_ENTRIES: 8192
[ 0.003333] ... MAX_LOCKDEP_CHAINS: 16384
[ 0.003333] ... CHAINHASH_SIZE: 8192
[ 0.003333] memory used by lock dependency info: 2591 kB
[ 0.003333] per task-struct memory footprint: 1920 bytes
[ 0.003333] ------------------------
[ 0.003333] | Locking API testsuite:
[ 0.003333]
----------------------------------------------------------------------------
[ 0.003333] | spin |wlock |rlock |mutex
| wsem | rsem |
[ 0.003333]
--------------------------------------------------------------------------
[ 0.003333] A-A deadlock: ok | ok | ok | ok
| ok | ok |
[ 0.003333] A-B-B-A deadlock: ok | ok | ok | ok
| ok | ok |
[ 0.003333] A-B-B-C-C-A deadlock: ok | ok | ok | ok
| ok | ok |
[ 0.003333] A-B-C-A-B-C deadlock: ok | ok | ok | ok
| ok | ok |
[ 0.003333] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok
| ok | ok |
[ 0.003333] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok
| ok | ok |
[ 0.003333] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok
| ok | ok |
[ 0.003333] double unlock: ok | ok | ok | ok
| ok | ok |
[ 0.003333] initialize held: ok | ok | ok | ok
| ok | ok |
[ 0.003333] bad unlock order: ok | ok | ok | ok
| ok | ok |
[ 0.003333]
--------------------------------------------------------------------------
[ 0.003333] recursive read-lock: | ok |
| ok |
[ 0.003333] recursive read-lock #2: | ok |
| ok |
[ 0.003333] mixed read-write-lock: | ok |
| ok |
[ 0.003333] mixed write-read-lock: | ok |
| ok |
[ 0.003333]
--------------------------------------------------------------------------
[ 0.003333] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.003333] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.003333] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.003333] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.003333] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 0.003333] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 0.003333] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 0.003333] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 0.003333] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 0.003333] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.003333] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.003333] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.003333] hard-irq lock-inversion/123: ok | ok | ok |
[ 0.003333] soft-irq lock-inversion/123: ok | ok | ok |
[ 0.003333] hard-irq lock-inversion/132: ok | ok | ok |
[ 0.003333] soft-irq lock-inversion/132: ok | ok | ok |
[ 0.003333] hard-irq lock-inversion/213: ok | ok | ok |
[ 0.003333] soft-irq lock-inversion/213: ok | ok | ok |
[ 0.003333] hard-irq lock-inversion/231: ok | ok | ok |
[ 0.003333] soft-irq lock-inversion/231: ok | ok | ok |
[ 0.003333] hard-irq lock-inversion/312: ok | ok | ok |
[ 0.003333] soft-irq lock-inversion/312: ok | ok | ok |
[ 0.003333] hard-irq lock-inversion/321: ok | ok | ok |
[ 0.003333] soft-irq lock-inversion/321: ok | ok | ok |
[ 0.003333] hard-irq read-recursion/123: ok |
[ 0.003333] soft-irq read-recursion/123: ok |
[ 0.003333] hard-irq read-recursion/132: ok |
[ 0.003333] soft-irq read-recursion/132: ok |
[ 0.003333] hard-irq read-recursion/213: ok |
[ 0.003333] soft-irq read-recursion/213: ok |
[ 0.003333] hard-irq read-recursion/231: ok |
[ 0.003333] soft-irq read-recursion/231: ok |
[ 0.003333] hard-irq read-recursion/312: ok |
[ 0.003333] soft-irq read-recursion/312: ok |
[ 0.003333] hard-irq read-recursion/321: ok |
[ 0.003333] soft-irq read-recursion/321: ok |
[ 0.003333] -------------------------------------------------------
[ 0.003333] Good, all 218 testcases passed! |
[ 0.003333] ---------------------------------
[ 0.003333] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.003333] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.003333] Memory: 489984k/507264k available (2103k kernel code, 16676k
reserved, 795k data, 232k init, 0k highmem)
[ 0.003333] virtual kernel memory layout:
[ 0.003333] fixmap : 0xfffed000 - 0xfffff000 ( 72 kB)
[ 0.003333] vmalloc : 0xdf760000 - 0xfffeb000 ( 520 MB)
[ 0.003333] lowmem : 0xc0000000 - 0xdef60000 ( 495 MB)
[ 0.003333] .init : 0xc03d6000 - 0xc0410000 ( 232 kB)
[ 0.003333] .data : 0xc030dee5 - 0xc03d4e00 ( 795 kB)
[ 0.003333] .text : 0xc0100000 - 0xc030dee5 (2103 kB)
[ 0.003333] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.003333] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0,
CPUs=1, Nodes=1
[ 0.003387] Calibrating delay loop (skipped), value calculated using
timer frequency.. 1496.76 BogoMIPS (lpj=2492423)
[ 0.003553] Mount-cache hash table entries: 512
[ 0.005956] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.006005] CPU: L2 cache: 256K
[ 0.006020] CPU serial number disabled.
[ 0.006075] CPU: Intel Pentium III (Coppermine) stepping 0a
[ 0.006121] Checking 'hlt' instruction... OK.
[ 0.017692] Freeing SMP alternatives: 0k freed
[ 0.017713] ACPI: Core revision 20081204
[ 0.046419] ACPI: setting ELCR to 0200 (from 0a00)
[ 0.049570] Testing tracer nop: PASSED
[ 0.054406] net_namespace: 732 bytes
[ 0.056106] NET: Registered protocol family 16
[ 0.059516] ACPI: bus type pci registered
[ 0.061561] PCI: PCI BIOS revision 2.10 entry at 0xfe5ae, last bus=5
[ 0.061612] PCI: Using configuration type 1 for base access
[ 0.072890] bio: create slab <bio-0> at 0
[ 0.083287] ACPI: EC: Look up EC in DSDT
[ 0.111714] ACPI: Interpreter enabled
[ 0.111779] ACPI: (supports S0 S3 S4 S5)
[ 0.112204] ACPI: Using PIC for interrupt routing
[ 0.171384] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[ 0.171559] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.172670] pci 0000:00:00.0: reg 10 32bit mmio: [0xf0000000-0xf3ffffff]
[ 0.173068] pci 0000:00:02.0: reg 10 32bit mmio: [0xf7eff000-0xf7efffff]
[ 0.173210] pci 0000:00:02.0: PME# supported from D3hot D3cold
[ 0.173246] pci 0000:00:02.0: PME# disabled
[ 0.173469] pci 0000:00:04.0: reg 20 io port: [0xeff0-0xefff]
[ 0.173653] pci 0000:00:06.0: reg 10 io port: [0xed00-0xedff]
[ 0.173677] pci 0000:00:06.0: reg 14 32bit mmio: [0xf7efe000-0xf7efefff]
[ 0.173803] pci 0000:00:06.0: supports D1 D2
[ 0.173811] pci 0000:00:06.0: PME# supported from D2 D3hot D3cold
[ 0.173839] pci 0000:00:06.0: PME# disabled
[ 0.174245] pci 0000:00:08.0: quirk: region ee00-ee3f claimed by ali7101
ACPI
[ 0.174276] pci 0000:00:08.0: quirk: region ef00-ef1f claimed by ali7101
SMB
[ 0.174396] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf7efd000-0xf7efdfff]
[ 0.174420] pci 0000:00:0a.0: reg 14 io port: [0xeb40-0xeb7f]
[ 0.174444] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf7d00000-0xf7dfffff]
[ 0.174556] pci 0000:00:0a.0: supports D1 D2
[ 0.174564] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.174592] pci 0000:00:0a.0: PME# disabled
[ 0.174721] pci 0000:00:10.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.174781] pci 0000:00:10.0: supports D1 D2
[ 0.174788] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.174817] pci 0000:00:10.0: PME# disabled
[ 0.174930] pci 0000:00:11.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.175094] pci 0000:00:11.1: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.175269] pci 0000:00:12.0: reg 10 32bit mmio: [0xf7cffe00-0xf7cfffff]
[ 0.175413] pci 0000:00:12.0: supports D1 D2
[ 0.175421] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.175450] pci 0000:00:12.0: PME# disabled
[ 0.175638] pci 0000:01:00.0: reg 10 32bit mmio: [0xfc000000-0xfdffffff]
[ 0.175661] pci 0000:01:00.0: reg 14 32bit mmio: [0xfbc00000-0xfbffffff]
[ 0.175684] pci 0000:01:00.0: reg 18 32bit mmio: [0xf8000000-0xf9ffffff]
[ 0.175706] pci 0000:01:00.0: reg 1c 32bit mmio: [0xf7ff8000-0xf7ffffff]
[ 0.175752] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
[ 0.175822] pci 0000:01:00.0: supports D1 D2
[ 0.175957] pci 0000:00:01.0: bridge 32bit mmio: [0xf7f00000-0xfdffffff]
[ 0.176163] pci_bus 0000:00: on NUMA node 0
[ 0.176209] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.176971] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.214343] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11)
[ 0.215308] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11)
[ 0.216209] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11)
[ 0.217245] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11)
[ 0.218156] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11)
[ 0.219058] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11)
[ 0.220675] ACPI: Power Resource [PFAN] (off)
[ 0.223921] PCI: Using ACPI for IRQ routing
[ 0.227832] pnp: PnP ACPI init
[ 0.227832] ACPI: bus type pnp registered
[ 0.254110] pnp: PnP ACPI: found 12 devices
[ 0.254169] ACPI: ACPI bus type pnp unregistered
[ 0.254282] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.254313] system 00:00: iomem range 0xe0000-0xeffff could not be
reserved
[ 0.254342] system 00:00: iomem range 0xf0000-0xfffff could not be
reserved
[ 0.254370] system 00:00: iomem range 0x100000-0x1ef5ffff could not be
reserved
[ 0.254400] system 00:00: iomem range 0x1ef60000-0x1ef6ffff could not be
reserved
[ 0.254431] system 00:00: iomem range 0x1f000000-0x1fffffff has been
reserved
[ 0.254457] system 00:00: iomem range 0x1ef70000-0x1effffff has been
reserved
[ 0.254488] system 00:00: iomem range 0xffe00000-0xffffffff could not be
reserved
[ 0.254583] system 00:08: ioport range 0x370-0x371 has been reserved
[ 0.254611] system 00:08: ioport range 0x40b-0x40b has been reserved
[ 0.254637] system 00:08: ioport range 0x480-0x48f has been reserved
[ 0.254663] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.254689] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[ 0.254715] system 00:08: ioport range 0x6c0-0x6ff has been reserved
[ 0.254742] system 00:08: ioport range 0xe000-0xe07f has been reserved
[ 0.254769] system 00:08: ioport range 0xe080-0xe0ff has been reserved
[ 0.254796] system 00:08: ioport range 0xe400-0xe47f has been reserved
[ 0.254823] system 00:08: ioport range 0xe480-0xe4ff has been reserved
[ 0.254850] system 00:08: ioport range 0xe800-0xe87f has been reserved
[ 0.254877] system 00:08: ioport range 0xe880-0xe8ff has been reserved
[ 0.254904] system 00:08: ioport range 0xec00-0xec7f has been reserved
[ 0.254931] system 00:08: ioport range 0xec80-0xecff has been reserved
[ 0.254960] system 00:08: ioport range 0xee00-0xee41 could not be
reserved
[ 0.254987] system 00:08: ioport range 0xee90-0xee9f has been reserved
[ 0.255014] system 00:08: ioport range 0xeeac-0xeeac has been reserved
[ 0.255042] system 00:08: ioport range 0xef00-0xef3f could not be
reserved
[ 0.255070] system 00:08: ioport range 0xef40-0xef5f has been reserved
[ 0.294211] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.294268] pci 0000:00:01.0: IO window: disabled
[ 0.294300] pci 0000:00:01.0: MEM window: 0xf7f00000-0xfdffffff
[ 0.294331] pci 0000:00:01.0: PREFETCH window:
0x00000048000000-0x000000480fffff
[ 0.294377] pci 0000:00:10.0: CardBus bridge, secondary bus 0000:02
[ 0.294399] pci 0000:00:10.0: IO window: 0x001000-0x0010ff
[ 0.294426] pci 0000:00:10.0: IO window: 0x001400-0x0014ff
[ 0.294454] pci 0000:00:10.0: PREFETCH window: 0x30000000-0x33ffffff
[ 0.294484] pci 0000:00:10.0: MEM window: 0x34000000-0x37ffffff
[ 0.294514] pci 0000:00:11.0: CardBus bridge, secondary bus 0000:06
[ 0.294535] pci 0000:00:11.0: IO window: 0x001800-0x0018ff
[ 0.294562] pci 0000:00:11.0: IO window: 0x001c00-0x001cff
[ 0.294590] pci 0000:00:11.0: PREFETCH window: 0x38000000-0x3bffffff
[ 0.294620] pci 0000:00:11.0: MEM window: 0x3c000000-0x3fffffff
[ 0.294650] pci 0000:00:11.1: CardBus bridge, secondary bus 0000:0a
[ 0.294671] pci 0000:00:11.1: IO window: 0x002000-0x0020ff
[ 0.294698] pci 0000:00:11.1: IO window: 0x002400-0x0024ff
[ 0.294726] pci 0000:00:11.1: PREFETCH window: 0x40000000-0x43ffffff
[ 0.294756] pci 0000:00:11.1: MEM window: 0x44000000-0x47ffffff
[ 0.294822] pci 0000:00:01.0: setting latency timer to 64
[ 0.294855] pci 0000:00:10.0: enabling device (0000 -> 0003)
[ 0.296744] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 0.296772] PCI: setting IRQ 11 as level-triggered
[ 0.296785] pci 0000:00:10.0: PCI INT A -> Link[LNKC] -> GSI 11 (level,
low) -> IRQ 11
[ 0.296844] pci 0000:00:11.0: enabling device (0000 -> 0003)
[ 0.298305] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.298331] pci 0000:00:11.0: PCI INT A -> Link[LNKA] -> GSI 11 (level,
low) -> IRQ 11
[ 0.298387] pci 0000:00:11.1: enabling device (0000 -> 0003)
[ 0.299842] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.299868] pci 0000:00:11.1: PCI INT B -> Link[LNKB] -> GSI 11 (level,
low) -> IRQ 11
[ 0.299915] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.299925] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.299934] pci_bus 0000:01: resource 0 mem: [0x0-0x0]
[ 0.299943] pci_bus 0000:01: resource 1 mem: [0xf7f00000-0xfdffffff]
[ 0.299952] pci_bus 0000:01: resource 2 mem: [0x48000000-0x480fffff]
[ 0.299961] pci_bus 0000:01: resource 3 mem: [0x0-0x0]
[ 0.300008] pci_bus 0000:02: resource 0 io: [0x1000-0x10ff]
[ 0.300018] pci_bus 0000:02: resource 1 io: [0x1400-0x14ff]
[ 0.300027] pci_bus 0000:02: resource 2 mem: [0x30000000-0x33ffffff]
[ 0.300037] pci_bus 0000:02: resource 3 mem: [0x34000000-0x37ffffff]
[ 0.300048] pci_bus 0000:06: resource 0 io: [0x1800-0x18ff]
[ 0.300056] pci_bus 0000:06: resource 1 io: [0x1c00-0x1cff]
[ 0.300065] pci_bus 0000:06: resource 2 mem: [0x38000000-0x3bffffff]
[ 0.300075] pci_bus 0000:06: resource 3 mem: [0x3c000000-0x3fffffff]
[ 0.300085] pci_bus 0000:0a: resource 0 io: [0x2000-0x20ff]
[ 0.300094] pci_bus 0000:0a: resource 1 io: [0x2400-0x24ff]
[ 0.300103] pci_bus 0000:0a: resource 2 mem: [0x40000000-0x43ffffff]
[ 0.300113] pci_bus 0000:0a: resource 3 mem: [0x44000000-0x47ffffff]
[ 0.300266] NET: Registered protocol family 2
[ 0.301461] IP route cache hash table entries: 4096 (order: 2, 16384
bytes)
[ 0.302506] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
[ 0.303245] TCP bind hash table entries: 16384 (order: 7, 655360 bytes)
[ 0.309839] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.310256] TCP reno registered
[ 0.311022] NET: Registered protocol family 1
[ 0.312512] checking if image is initramfs... it is
[ 0.796830] Switched to high resolution mode on CPU 0
[ 1.224503] Freeing initrd memory: 3586k freed
[ 1.233149] Initializing RT-Tester: OK
[ 1.234626] audit: initializing netlink socket (disabled)
[ 1.234880] type=2000 audit(1232262785.233:1): initialized
[ 1.243686] Kprobe smoke test started
[ 1.255271] Kprobe smoke test passed successfully
[ 1.255381] Testing tracer sched_switch: PASSED
[ 1.394233] msgmni has been set to 964
[ 1.395797] io scheduler noop registered
[ 1.395833] io scheduler anticipatory registered
[ 1.395852] io scheduler deadline registered
[ 1.395984] io scheduler cfq registered (default)
[ 1.396252] pci 0000:00:07.0: Activating ISA DMA hang workarounds
[ 1.396332] pci 0000:00:0a.0: Firmware left e100 interrupts enabled;
disabling
[ 1.396431] pci 0000:01:00.0: Boot video device
[ 1.399581] vesafb: framebuffer at 0xfc000000, mapped to 0xdf780000,
using 3072k, total 16384k
[ 1.399633] vesafb: mode is 1024x768x16, linelength=2048, pages=9
[ 1.399655] vesafb: protected mode interface info at c000:775e
[ 1.399676] vesafb: pmi: set display start = c00c777f, set palette =
c00c77e2
[ 1.399698] vesafb: scrolling: redraw
[ 1.399719] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 1.467320] Console: switching to colour frame buffer device 128x48
[ 1.532839] fb0: VESA VGA frame buffer device
[ 1.972178] brd: module loaded
[ 1.972629] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
[ 1.973730] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.976680] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 1.977583] e100 0000:00:0a.0: PCI INT A -> Link[LNKD] -> GSI 11 (level,
low) -> IRQ 11
[ 2.005405] e100 0000:00:0a.0: PME# disabled
[ 2.007306] e100: eth0: e100_probe: addr 0xf7efd000, irq 11, MAC addr
00:00:39:d7:14:a1
[ 2.008741] netconsole: local port 6665
[ 2.009228] netconsole: local IP 10.0.0.1
[ 2.009726] netconsole: interface eth0
[ 2.010494] netconsole: remote port 6666
[ 2.010985] netconsole: remote IP 10.0.0.2
[ 2.011494] netconsole: remote ethernet address 00:17:42:21:27:e4
[ 2.012283] netconsole: device eth0 not up yet, forcing it
[ 2.028555] e100: eth0: e100_request_firmware: Failed to load firmware
"e100/d101m_ucode.bin": -22
[ 2.030525] netconsole: failed to open eth0
[ 2.031061] netconsole: cleaning up
[ 2.032809] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[ 2.039543] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.040340] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.044115] mice: PS/2 mouse device common for all mice
[ 2.045538] cpuidle: using governor ladder
[ 2.070283] cpuidle: using governor menu
[ 2.094762] TCP cubic registered
[ 2.118851] Using IPI Shortcut mode
[ 2.146101] registered taskstats version 1
[ 2.171088] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 2.200398] Freeing unused kernel memory: 232k freed
[ 2.226493] Write protecting the kernel text: 2104k
[ 2.251103] Write protecting the kernel read-only data: 624k
[ 2.297370] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 2.934696] SCSI subsystem initialized
[ 3.004777] Driver 'sd' needs updating - please use bus_type methods
[ 3.135887] libata version 3.00 loaded.
[ 3.177918] pata_ali 0000:00:04.0: can't derive routing for PCI INT A
[ 3.202044] scsi0 : pata_ali
[ 3.225987] scsi1 : pata_ali
[ 3.252828] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xeff0 irq
14
[ 3.275482] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xeff8 irq
15
[ 3.457510] ata1.00: ATA-5: IC25N020ATDA04-0, DA3OA70A, max UDMA/100
[ 3.479715] ata1.00: 39070080 sectors, multi 0: LBA
[ 3.501535] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 3.537337] ata1.00: configured for UDMA/33
[ 3.560742] scsi 0:0:0:0: Direct-Access ATA IC25N020ATDA04-0
DA3O PQ: 0 ANSI: 5
[ 3.584643] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0
GB/18.6 GiB)
[ 3.607121] sd 0:0:0:0: [sda] Write Protect is off
[ 3.629354] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.629534] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.654639] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0
GB/18.6 GiB)
[ 3.678341] sd 0:0:0:0: [sda] Write Protect is off
[ 3.701726] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.701905] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.726082] sda: sda1 sda2
[ 3.778506] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.977214] ata2.00: ATAPI: TOSHIBA DVD-ROM SD-C2502, 1313, max UDMA/33
[ 4.001118] ata2.00: WARNING: ATAPI DMA disabled for reliablity issues.
It can be enabled
[ 4.025068] ata2.00: WARNING: via pata_ali.atapi_dma modparam or
corresponding sysfs node.
[ 4.060470] ata2.00: configured for UDMA/33
[ 4.089114] scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-C2502
1313 PQ: 0 ANSI: 5
[ 4.371880] ReiserFS: sda2: found reiserfs format "3.6" with standard
journal
[ 4.398032] ReiserFS: sda2: using ordered data mode
[ 4.440199] ReiserFS: sda2: journal params: device sda2, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit age
30, max trans age 30
[ 4.502331] ReiserFS: sda2: checking transaction log (sda2)
[ 4.581876] ReiserFS: sda2: Using r5 hash to sort names
[ 7.386679] usbcore: registered new interface driver usbfs
[ 7.413939] usbcore: registered new interface driver hub
[ 7.440838] usbcore: registered new device driver usb
[ 14.615288] Linux agpgart interface v0.103
[ 14.666077] input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 14.676898] ACPI: Power Button (FF) [PWRF]
[ 14.677636] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 14.678101] ACPI: Lid Switch [LID]
[ 14.706387] ACPI: AC Adapter [ADP1] (on-line)
[ 14.729305] ACPI Warning (nspredef-0940): \_SB_.BAT1._BIF: Return Package
type mismatch at index 12 - found Integer, expected String/Buffer [20081204]
[ 14.735600] ACPI: Battery Slot [BAT1] (battery present)
[ 14.735868] ACPI: Battery Slot [BAT2] (battery absent)
[ 14.766266] agpgart-ali 0000:00:00.0: ALi M1644 chipset
[ 14.902607] agpgart-ali 0000:00:00.0: AGP aperture is 64M @ 0xf0000000
[ 14.975082] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 14.975935] processor ACPI_CPU:00: registered as cooling_device0
[ 15.067646] thermal LNXTHERM:01: registered as thermal_zone0
[ 15.069570] ACPI: Thermal Zone [THRM] (37 C)
[ 15.144627] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
[ 15.144645] toshiba_acpi: HCI method: \_SB_.VALD.GHCI
[ 15.307679] fan PNP0C0B:00: registered as cooling_device1
[ 15.307721] ACPI: Fan [FAN] (off)
[ 15.326246] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:14/device:15/input/input3
[ 15.336949] ACPI: Video Device [VGA] (multi-head: yes rom: yes post:
no)
[ 15.515906] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 15.518039] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
[ 15.518058] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11
(level, low) -> IRQ 11
[ 15.518232] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 15.525210] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus
number 1
[ 15.525346] ohci_hcd 0000:00:02.0: irq 11, io mem 0xf7eff000
[ 15.582241] usb usb1: configuration #1 chosen from 1 choice
[ 15.583673] hub 1-0:1.0: USB hub found
[ 15.584309] hub 1-0:1.0: 3 ports detected
[ 15.899758] pci 0000:00:08.0: enabling device (0000 -> 0001)
[ 15.901113] ALi_M1535: initialized. timeout=60 sec (nowayout=0)
[ 16.102135] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 16.218009] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 16.218329] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 16.465587] Driver 'sr' needs updating - please use bus_type methods
[ 16.514216] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 16.514242] Uniform CD-ROM driver Revision: 3.20
[ 16.515596] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 16.652464] input: ImPS/2 Generic Wheel Mouse as
/devices/platform/i8042/serio1/input/input5
[ 16.768730] yenta_cardbus 0000:00:10.0: CardBus bridge found [12a3:ab01]
[ 16.894525] yenta_cardbus 0000:00:10.0: ISA IRQ mask 0x0000, PCI irq 11
[ 16.894544] yenta_cardbus 0000:00:10.0: Socket status: 30000011
[ 16.896654] yenta_cardbus 0000:00:11.0: CardBus bridge found [1179:0001]
[ 17.024426] yenta_cardbus 0000:00:11.0: ISA IRQ mask 0x04b8, PCI irq 11
[ 17.024444] yenta_cardbus 0000:00:11.0: Socket status: 30000007
[ 17.034079] yenta_cardbus 0000:00:11.1: CardBus bridge found [1179:0001]
[ 17.162499] yenta_cardbus 0000:00:11.1: ISA IRQ mask 0x04b8, PCI irq 11
[ 17.162517] yenta_cardbus 0000:00:11.1: Socket status: 30000007
[ 17.530657] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted
into slot 0
[ 17.579714] rtc_cmos 00:07: RTC can wake from S4
[ 17.581781] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 17.581879] rtc0: alarms up to one year, 114 bytes nvram
[ 18.515117] NET: Registered protocol family 23
[ 18.810200] Detected unconfigured Toshiba laptop with ALi ISA bridge SMSC
IrDA chip, pre-configuring device.
[ 18.810242] Activated ALi 1533 ISA bridge port 0x02e8.
[ 18.810258] Activated ALi 1533 ISA bridge port 0x02f8.
[ 18.810514] found SMC SuperIO Chip (devid=0x5a rev=00 base=0x002e):
LPC47N227
[ 18.810530] smsc_superio_flat(): IrDA not enabled
[ 18.810558] smsc_superio_flat(): fir: 0x2f8, sir: 0x2e8, dma: 03, irq: 7,
mode: 0x02
[ 18.810599] SMsC IrDA Controller found
[ 18.810602] IrCC version 2.0, firport 0x2f8, sirport 0x2e8 dma=3, irq=7
[ 18.810822] No transceiver found. Defaulting to Fast pin select
[ 18.810864] irda0 (): not using net_device_ops yet
[ 18.811871] IrDA: Registered device irda0
[ 20.638031] ALI 5451 0000:00:06.0: power state changed by ACPI to D0
[ 20.639632] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 20.639651] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11
(level, low) -> IRQ 11
[ 24.331300] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x100-0x3af:
excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f
[ 24.337691] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af:
excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f
[ 24.341062] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff:
clean.
[ 24.344389] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff:
clean.
[ 24.345792] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7:
clean.
[ 24.348475] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff:
clean.
[ 24.363177] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x3e0-0x4ff:
clean.
[ 24.364933] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x820-0x8ff:
clean.
[ 24.366325] pcmcia_socket pcmcia_socket2: cs: IO port probe 0xc00-0xcf7:
clean.
[ 24.385631] pcmcia_socket pcmcia_socket2: cs: IO port probe 0xa00-0xaff:
clean.
[ 24.621530] Marking TSC unstable due to TSC halts in idle
[ 24.793419] Clocksource tsc unstable (delta = -200528285 ns)
[ 25.071083] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
excluding 0x200-0x207 0x220-0x22f 0x330-0x337 0x388-0x38f
[ 25.074775] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
clean.
[ 25.076294] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
clean.
[ 25.077742] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
clean.
[ 25.080343] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
clean.
[ 25.082369] pcmcia_socket pcmcia_socket0: cs: memory probe
0xa0000000-0xa0ffffff: clean.
[ 25.097658] pcmcia 0.0: pcmcia: registering new device pcmcia0.0
[ 25.442349] orinoco 0.15 (David Gibson <hermes@...son.dropbear.id.au>,
Pavel Roskin <proski@....org>, et al)
[ 25.538930] orinoco_cs 0.15 (David Gibson <hermes@...son.dropbear.id.au>,
Pavel Roskin <proski@....org>, et al)
[ 25.581666] eth1 (orinoco_cs): not using net_device_ops yet
[ 25.621420] eth1: Hardware identity 0005:0002:0001:0002
[ 25.621534] eth1: Station identity 001f:0001:0006:000e
[ 25.621545] eth1: Firmware determined as Lucent/Agere 6.14
[ 25.621994] eth1: Attempting to download firmware agere_sta_fw.bin
[ 25.622026] hermes_dld: AUX enable returned 0
[ 25.623030] hermes_dld: AUX disable returned 0
[ 25.623038] hermes_dld: Actual PDA length 998, Max allowed 1000
[ 25.623046] eth1: Read PDA returned 0
[ 25.623058] orinoco_cs 0.0: firmware: requesting agere_sta_fw.bin
[ 25.745384] hermes_dld: AUX enable returned 0
[ 25.745401] hermes_dld: Enabling volatile, EP 0x000f8000
[ 25.746492] hermes_dld: PROGRAM_ENABLE returned 0
[ 25.746500] eth1: Program init returned 0
[ 25.746509] hermes_dld: Programming block of length 60416 to address
0x001f0000
[ 25.794601] hermes_dld: Programming block of length 4096 to address
0x001ef000
[ 25.797876] eth1: Program returned 0
[ 25.797888] hermes_dld: Found record 0x0003 at de66b41c
[ 25.797909] hermes_dld: Found record 0x0005 at de66b4a8
[ 25.797928] hermes_dld: Found record 0x0008 at de66b4d2
[ 25.797944] hermes_dld: Found record 0x0007 at de66b4c4
[ 25.797962] hermes_dld: Found record 0x0006 at de66b4b6
[ 25.797982] hermes_dld: Found record 0x0110 at de66b59a
[ 25.798016] hermes_dld: Found record 0x0120 at de66b5ba
[ 25.798049] hermes_dld: Found record 0x0130 at de66b5da
[ 25.798081] hermes_dld: Found record 0x0140 at de66b5fa
[ 25.798095] hermes_dld: Found record 0x0150 at de66b602
[ 25.798108] hermes_dld: Using default record 0x0160 at dfb0fb60
[ 25.798141] hermes_dld: Found record 0x0101 at de66b546
[ 25.798156] hermes_dld: Found record 0x0103 at de66b55c
[ 25.798176] hermes_dld: Found record 0x0104 at de66b56c
[ 25.798188] hermes_dld: Found record 0x0105 at de66b572
[ 25.798200] hermes_dld: Found record 0x0105 at de66b572
[ 25.798212] hermes_dld: Found record 0x0105 at de66b572
[ 25.798224] hermes_dld: Found record 0x0107 at de66b57e
[ 25.798236] hermes_dld: Found record 0x0109 at de66b58c
[ 25.798255] hermes_dld: Using default record 0x0161 at dfb0fb80
[ 25.798470] eth1: Apply PDA returned 0
[ 25.798534] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000,
r2 0x0000
[ 25.798563] hermes_dld: AUX disable returned 0
[ 25.809208] eth1: Program end returned 0
[ 25.809217] eth1: hermes_present returned 1
[ 25.810071] eth1: Hardware identity 0005:0002:0001:0002
[ 25.810195] eth1: Station identity 001f:0002:0009:0030
[ 25.810207] eth1: Firmware determined as Lucent/Agere 9.48
[ 25.810216] eth1: Ad-hoc demo mode supported
[ 25.810223] eth1: IEEE standard IBSS ad-hoc mode supported
[ 25.810230] eth1: WEP supported, 104-bit key
[ 25.810238] eth1: WPA-PSK supported
[ 26.501955] eth1: MAC address 00:02:2d:26:95:6c
[ 26.502071] eth1: Station name "HERMES I"
[ 26.502794] eth1: ready
[ 26.503770] eth1: orinoco_cs at 0.0, irq 11, io 0x0100-0x013f
[ 26.848486] Toshiba System Management Mode driver v1.11 26/9/2001
[ 26.910498] Non-volatile memory driver v1.3
[ 27.774924] device-mapper: uevent: version 1.0.3
[ 27.777120] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
dm-devel@...hat.com
[ 28.005216] device-mapper: multipath: version 1.0.5 loaded
[ 29.599977] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 29.601327] device-mapper: table: 254:0: multipath: error getting device
[ 29.601345] device-mapper: ioctl: error adding target to table
[ 37.512001] loop: module loaded
[ 42.999188] Adding 500432k swap on /dev/sda1. Priority:-1 extents:1
across:500432k
[ 47.154644] IrCOMM protocol (Dag Brattli)
[ 50.219051] PPP generic driver version 2.4.2
[ 56.649125] NET: Registered protocol family 17
[ 57.064141] eth1: Lucent/Agere firmware doesn't support manual roaming
[ 57.230035] eth1: New link status: Connected (0001)
[ 1424.976778] usb 1-1: new full speed USB device using ohci_hcd and address
2
[ 1425.273541] usb 1-1: configuration #1 chosen from 1 choice
[ 1425.520764] Bluetooth: Core ver 2.14
[ 1425.522079] NET: Registered protocol family 31
[ 1425.522093] Bluetooth: HCI device and connection manager initialized
[ 1425.522975] Bluetooth: HCI socket layer initialized
[ 1471.803278] usb 1-1: USB disconnect, address 2
[ 1475.789984] usb 1-1: new full speed USB device using ohci_hcd and address
3
[ 1476.087287] usb 1-1: configuration #1 chosen from 1 choice
[ 2268.793247] usb 1-1: USB disconnect, address 3
[ 2641.646528] usb 1-1: new full speed USB device using ohci_hcd and address
4
[ 2641.936946] usb 1-1: configuration #1 chosen from 1 choice
[ 2643.417663] Bluetooth: Generic Bluetooth USB driver ver 0.4
[ 2643.422437] usbcore: registered new interface driver btusb
[ 2648.321798] Bluetooth: L2CAP ver 2.11
[ 2648.321823] Bluetooth: L2CAP socket layer initialized
[ 2648.941501] Bluetooth: RFCOMM socket layer initialized
[ 2648.941596] Bluetooth: RFCOMM TTY layer initialized
[ 2648.941605] Bluetooth: RFCOMM ver 1.10
[ 2649.198619] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2649.760381] bluetoothd[14690]: segfault at 33462d3d ip 33462d3d sp
bfdc4f7c error 4 in input.so[b7ca4000+7000]
[ 3712.071493] usb 1-1: USB disconnect, address 4
[ 3712.072276] btusb_intr_complete: hci0 urb de7e8500 failed to resubmit
(19)
[ 3712.088751] btusb_send_frame: hci0 urb d770b980 submission failed
[ 3712.796728] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 3742.666400] usb 1-2: new full speed USB device using ohci_hcd and address
6
[ 3742.869875] usb 1-2: configuration #1 chosen from 1 choice
[ 3743.369617] Initializing USB Mass Storage driver...
[ 3743.374535] scsi2 : SCSI emulation for USB Mass Storage devices
[ 3743.379271] usbcore: registered new interface driver usb-storage
[ 3743.379300] USB Mass Storage support registered.
[ 3743.401626] usb-storage: device found at 6
[ 3743.401645] usb-storage: waiting for device to settle before scanning
[ 3748.408952] scsi 2:0:0:0: Direct-Access CBM Flash Disk
5.00 PQ: 0 ANSI: 2
[ 3748.434331] sd 2:0:0:0: [sdb] 257792 512-byte hardware sectors: (131
MB/125 MiB)
[ 3748.442873] sd 2:0:0:0: [sdb] Write Protect is off
[ 3748.442901] sd 2:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 3748.442911] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3748.465826] sd 2:0:0:0: [sdb] 257792 512-byte hardware sectors: (131
MB/125 MiB)
[ 3748.472807] sd 2:0:0:0: [sdb] Write Protect is off
[ 3748.472832] sd 2:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 3748.472841] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3748.472862] sdb: sdb1
[ 3748.492871] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 3748.507001] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 3748.514442] usb-storage: device scan complete
[ 7286.551236] usb 1-2: USB disconnect, address 6
[ 8835.243495] Bluetooth: RFCOMM socket layer initialized
[ 8835.243588] Bluetooth: RFCOMM TTY layer initialized
[ 8835.243596] Bluetooth: RFCOMM ver 1.10
[ 9003.362634] usb 1-1: new full speed USB device using ohci_hcd and address
7
[ 9003.656480] usb 1-1: configuration #1 chosen from 1 choice
[ 9014.227076] bluetoothd[16121]: segfault at 33462d3d ip 33462d3d sp
bfa1d12c error 4 in input.so[b7bff000+7000]
[ 9065.822051] usb 1-1: USB disconnect, address 7
[ 9065.822356] btusb_intr_complete: hci0 urb ddc22c80 failed to resubmit
(19)
[ 9065.840571] btusb_send_frame: hci0 urb ca0ba280 submission failed
[ 9100.247477] Bluetooth: RFCOMM socket layer initialized
[ 9100.247568] Bluetooth: RFCOMM TTY layer initialized
[ 9100.247576] Bluetooth: RFCOMM ver 1.10
[ 9121.819215] usb 1-1: new full speed USB device using ohci_hcd and address
8
[ 9122.112701] usb 1-1: configuration #1 chosen from 1 choice
[ 9276.730179] bluetoothd[16317]: segfault at 33462d3d ip 33462d3d sp
bfce904c error 4 in input.so[b7ccb000+7000]
[ 9281.491396] usb 1-1: USB disconnect, address 8
[ 9281.491722] btusb_intr_complete: hci0 urb ca3b2d00 failed to resubmit
(19)
[ 9281.504863] btusb_send_frame: hci0 urb d75ee880 submission failed
[ 9314.600710] Bluetooth: RFCOMM socket layer initialized
[ 9314.600806] Bluetooth: RFCOMM TTY layer initialized
[ 9314.600814] Bluetooth: RFCOMM ver 1.10
[ 9340.699254] usb 1-1: new full speed USB device using ohci_hcd and address
9
[ 9340.997198] usb 1-1: configuration #1 chosen from 1 choice
[ 9414.902858] bluetoothd[16480]: segfault at 33462d3d ip 33462d3d sp
bfa1256c error 4 in input.so[b7bf2000+7000]
[ 9425.547461] usb 1-1: USB disconnect, address 9
[ 9425.548299] btusb_intr_complete: hci0 urb ca3b2e00 failed to resubmit
(19)
[ 9425.561615] btusb_send_frame: hci0 urb ca1c6980 submission failed
[15009.983787] zsh[17158]: segfault at 3722d00 ip b7d604d2 sp bfd98280 error
4 in complist.so[b7d5b000+d000]
[15081.162637] zsh[17261]: segfault at 88 ip b7c144d8 sp bff4a430 error 4 in
complist.so[b7c0f000+d000]
[15124.377990] zsh[17344]: segfault at 353348 ip b7d724d2 sp bfda7a90 error
4 in complist.so[b7d6d000+d000]
[15187.189266] zsh[17428]: segfault at 3f20139 ip b7da34d8 sp bfcd91c0 error
4 in complist.so[b7d9e000+d000]
[15275.419934] zsh[17594]: segfault at 322e476 ip b7d124d2 sp bff48430 error
4 in complist.so[b7d0d000+d000]
[15299.794884] zsh[17677]: segfault at 3000094 ip b7c1d4d2 sp bf852d30 error
4 in complist.so[b7c18000+d000]
[15368.921580] zsh[17762]: segfault at 76 ip b7d1d4d8 sp bff55430 error 4 in
complist.so[b7d18000+d000]
[15808.127010] zsh[17880]: segfault at 3000102 ip b7c904d2 sp bfc6a940 error
4 in complist.so[b7c8b000+d000]
[15869.272461] zsh[17909]: segfault at 30001ca ip b7c7b4d2 sp bf955e20 error
4 in complist.so[b7c76000+d000]
[16254.069164] zsh[17965]: segfault at 300016e ip b7c4e4d2 sp bff293f0 error
4 in complist.so[b7c49000+d000]
[17852.071266] PM: Syncing filesystems ... done.
[17852.762783] orinoco_cs 0.0: firmware: requesting agere_sta_fw.bin
[17852.990465] Freezing user space processes ... (elapsed 0.07 seconds)
done.
[17853.060540] Freezing remaining freezable tasks ... (elapsed 0.02 seconds)
done.
[17853.081892] Suspending console(s) (use no_console_suspend to debug)
[17853.093406] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[17853.094422] sd 0:0:0:0: [sda] Stopping disk
[17853.787896] pci 0000:01:00.0: power state changed by ACPI to D3
[17853.799467] e100 0000:00:0a.0: PME# enabled
[17853.799709] e100 0000:00:0a.0: wake-up capability enabled by ACPI
[17853.799886] e100 0000:00:0a.0: PCI INT A disabled
[17853.858759] ALI 5451 0000:00:06.0: PCI INT A disabled
[17853.872025] ALI 5451 0000:00:06.0: power state changed by ACPI to D3
[17854.645211] pata_ali 0000:00:04.0: can't derive routing for PCI INT A
[17854.658525] ohci_hcd 0000:00:02.0: PME# enabled
[17854.658749] ohci_hcd 0000:00:02.0: wake-up capability enabled by ACPI
[17854.658780] ohci_hcd 0000:00:02.0: PCI INT A disabled
[17854.675256] ACPI: Preparing to enter system sleep state S3
[17854.688347] Back to C!
[17854.688347]
[17854.688347] =================================
[17854.688347] [ INFO: inconsistent lock state ]
[17854.688347] 2.6.29-rc2-1avb #1
[17854.688347] ---------------------------------
[17854.688347] inconsistent {in-hardirq-W} -> {hardirq-on-W} usage.
[17854.688347] pm-suspend/18240 [HC0[0]:SC0[0]:HE1:SE1] takes:
[17854.688347] (&cpu_base->lock){++..}, at: [<c0136fcc>]
retrigger_next_event+0x5c/0xa0
[17854.688347] {in-hardirq-W} state was registered at:
[17854.688347] [<c01443cd>] __lock_acquire+0x79d/0x1930
[17854.688347] [<c01455bc>] lock_acquire+0x5c/0x80
[17854.688347] [<c03092e5>] _spin_lock+0x35/0x70
[17854.688347] [<c0136e61>] hrtimer_run_queues+0x31/0x140
[17854.688347] [<c0128d98>] run_local_timers+0x8/0x20
[17854.688347] [<c0128dd3>] update_process_times+0x23/0x60
[17854.688347] [<c013e274>] tick_periodic+0x24/0x80
[17854.688347] [<c013e2e2>] tick_handle_periodic+0x12/0x70
[17854.688347] [<c0104e24>] timer_interrupt+0x14/0x20
[17854.688347] [<c01607b9>] handle_IRQ_event+0x29/0x60
[17854.688347] [<c0161c59>] handle_level_irq+0x69/0xe0
[17854.688347] [<ffffffff>] 0xffffffff
[17854.688347] irq event stamp: 55771
[17854.688347] hardirqs last enabled at (55771): [<c0309125>]
_spin_unlock_irqrestore+0x35/0x60
[17854.688347] hardirqs last disabled at (55770): [<c0309419>]
_spin_lock_irqsave+0x19/0x80
[17854.688347] softirqs last enabled at (54836): [<c0124f54>]
__do_softirq+0xc4/0x110
[17854.688347] softirqs last disabled at (54831): [<c01049ae>]
do_softirq+0x8e/0xe0
[17854.688347]
[17854.688347] other info that might help us debug this:
[17854.688347] 3 locks held by pm-suspend/18240:
[17854.688347] #0: (&buffer->mutex){--..}, at: [<c01dd4c5>]
sysfs_write_file+0x25/0x100
[17854.688347] #1: (pm_mutex){--..}, at: [<c015056f>]
enter_state+0x4f/0x140
[17854.688347] #2: (dpm_list_mtx){--..}, at: [<c027880f>]
device_pm_lock+0xf/0x20
[17854.688347]
[17854.688347] stack backtrace:
[17854.688347] Pid: 18240, comm: pm-suspend Not tainted 2.6.29-rc2-1avb #1
[17854.688347] Call Trace:
[17854.688347] [<c0306248>] ? printk+0x18/0x20
[17854.688347] [<c0141fac>] print_usage_bug+0x16c/0x1d0
[17854.688347] [<c0142bcf>] mark_lock+0x8bf/0xc90
[17854.688347] [<c0106b8f>] ? pit_next_event+0x2f/0x40
[17854.688347] [<c01441b0>] __lock_acquire+0x580/0x1930
[17854.688347] [<c030916d>] ? _spin_unlock+0x1d/0x20
[17854.688347] [<c0106b8f>] ? pit_next_event+0x2f/0x40
[17854.688347] [<c013dd38>] ? clockevents_program_event+0x98/0x160
[17854.688347] [<c0142fe8>] ? mark_held_locks+0x48/0x90
[17854.688347] [<c0309125>] ? _spin_unlock_irqrestore+0x35/0x60
[17854.688347] [<c0143229>] ? trace_hardirqs_on_caller+0x139/0x190
[17854.688347] [<c014328b>] ? trace_hardirqs_on+0xb/0x10
[17854.688347] [<c01455bc>] lock_acquire+0x5c/0x80
[17854.688347] [<c0136fcc>] ? retrigger_next_event+0x5c/0xa0
[17854.688347] [<c03092e5>] _spin_lock+0x35/0x70
[17854.688347] [<c0136fcc>] ? retrigger_next_event+0x5c/0xa0
[17854.688347] [<c0136fcc>] retrigger_next_event+0x5c/0xa0
[17854.688347] [<c013711a>] hres_timers_resume+0xa/0x10
[17854.688347] [<c013aa8e>] timekeeping_resume+0xee/0x150
[17854.688347] [<c0273384>] __sysdev_resume+0x14/0x50
[17854.688347] [<c0273407>] sysdev_resume+0x47/0x80
[17854.688347] [<c02791ab>] device_power_up+0xb/0x20
[17854.688347] [<c015043f>] suspend_devices_and_enter+0xcf/0x150
[17854.688347] [<c0150c2f>] ? freeze_processes+0x3f/0x90
[17854.688347] [<c0150614>] enter_state+0xf4/0x140
[17854.688347] [<c01506dd>] state_store+0x7d/0xc0
[17854.688347] [<c0150660>] ? state_store+0x0/0xc0
[17854.688347] [<c0202da4>] kobj_attr_store+0x24/0x30
[17854.688347] [<c01dd53c>] sysfs_write_file+0x9c/0x100
[17854.688347] [<c019916c>] vfs_write+0x9c/0x160
[17854.688347] [<c0103494>] ? restore_nocheck_notrace+0x0/0xe
[17854.688347] [<c01dd4a0>] ? sysfs_write_file+0x0/0x100
[17854.688347] [<c01992ed>] sys_write+0x3d/0x70
[17854.688347] [<c0103371>] sysenter_do_call+0x12/0x31
[17854.711690] ohci_hcd 0000:00:02.0: restoring config space at offset 0xf
(was 0x500001ff, writing 0x5000010b)
[17854.711891] pci 0000:00:12.0: restoring config space at offset 0xf (was
0x1ff, writing 0x10b)
[17854.711967] pci 0000:01:00.0: restoring config space at offset 0xf (was
0x1ff, writing 0x10b)
[17854.712326] ACPI: Waking up from system sleep state S3
[17854.727919] agpgart-ali 0000:00:00.0: PME# disabled
[17854.727961] pci 0000:00:01.0: setting latency timer to 64
[17854.728001] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11
(level, low) -> IRQ 11
[17854.728022] ohci_hcd 0000:00:02.0: wake-up capability disabled by ACPI
[17854.728034] ohci_hcd 0000:00:02.0: PME# disabled
[17854.780338] usb usb1: root hub lost power or was reset
[17854.791691] pata_ali 0000:00:04.0: restoring config space at offset 0x1
(was 0x2900001, writing 0x2900005)
[17854.791729] pata_ali 0000:00:04.0: can't derive routing for PCI INT A
[17854.797232] ALI 5451 0000:00:06.0: power state changed by ACPI to D0
[17854.797260] ALI 5451 0000:00:06.0: restoring config space at offset 0xf
(was 0x180201ff, writing 0x1802010b)
[17854.797446] ALI 5451 0000:00:06.0: power state changed by ACPI to D0
[17854.797472] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11
(level, low) -> IRQ 11
[17855.084965] pci 0000:00:07.0: PME# disabled
[17855.084986] ali1535_smbus 0000:00:08.0: enabling device (0000 -> 0001)
[17855.098326] e100 0000:00:0a.0: restoring config space at offset 0xf (was
0x380801ff, writing 0x3808010b)
[17855.098370] e100 0000:00:0a.0: restoring config space at offset 0x1 (was
0x2900003, writing 0x2900007)
[17855.098397] e100 0000:00:0a.0: wake-up capability disabled by ACPI
[17855.098408] e100 0000:00:0a.0: PME# disabled
[17855.098461] yenta_cardbus 0000:00:10.0: restoring config space at offset
0x6 (was 0x50200, writing 0xb0050200)
[17855.375541] ata2.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out
[17855.375551] ata2.00: ACPI cmd ef/03:42:00:00:00:00 filtered out
[17855.382106] ata2.00: configured for UDMA/33
[17856.081662] pci 0000:00:12.0: PME# disabled
[17856.081684] pci 0000:01:00.0: PME# disabled
[17856.085875] sd 0:0:0:0: [sda] Starting disk
[17857.051972] ata1.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out
[17857.051982] ata1.00: ACPI cmd ef/03:44:00:00:00:00 filtered out
[17857.065642] ata1.00: configured for UDMA/33
[17857.091721] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0
GB/18.6 GiB)
[17857.091813] sd 0:0:0:0: [sda] Write Protect is off
[17857.091822] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[17857.091951] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[17857.344981] eth1: Attempting to download firmware agere_sta_fw.bin
[17857.345012] hermes_dld: AUX enable returned 0
[17857.346042] hermes_dld: AUX disable returned 0
[17857.346048] hermes_dld: Actual PDA length 998, Max allowed 1000
[17857.346054] eth1: Read PDA returned 0
[17857.428222] hermes_dld: AUX enable returned 0
[17857.428266] hermes_dld: Enabling volatile, EP 0x000f8000
[17857.429332] hermes_dld: PROGRAM_ENABLE returned 0
[17857.429338] eth1: Program init returned 0
[17857.429346] hermes_dld: Programming block of length 60416 to address
0x001f0000
[17857.477388] hermes_dld: Programming block of length 4096 to address
0x001ef000
[17857.480655] eth1: Program returned 0
[17857.480663] hermes_dld: Found record 0x0003 at dc68b81c
[17857.480682] hermes_dld: Found record 0x0005 at dc68b8a8
[17857.480699] hermes_dld: Found record 0x0008 at dc68b8d2
[17857.480715] hermes_dld: Found record 0x0007 at dc68b8c4
[17857.480731] hermes_dld: Found record 0x0006 at dc68b8b6
[17857.480748] hermes_dld: Found record 0x0110 at dc68b99a
[17857.480780] hermes_dld: Found record 0x0120 at dc68b9ba
[17857.480811] hermes_dld: Found record 0x0130 at dc68b9da
[17857.480842] hermes_dld: Found record 0x0140 at dc68b9fa
[17857.480854] hermes_dld: Found record 0x0150 at dc68ba02
[17857.480866] hermes_dld: Using default record 0x0160 at dfb0fb60
[17857.480898] hermes_dld: Found record 0x0101 at dc68b946
[17857.480911] hermes_dld: Found record 0x0103 at dc68b95c
[17857.480930] hermes_dld: Found record 0x0104 at dc68b96c
[17857.480940] hermes_dld: Found record 0x0105 at dc68b972
[17857.480951] hermes_dld: Found record 0x0105 at dc68b972
[17857.480962] hermes_dld: Found record 0x0105 at dc68b972
[17857.480972] hermes_dld: Found record 0x0107 at dc68b97e
[17857.480983] hermes_dld: Found record 0x0109 at dc68b98c
[17857.481000] hermes_dld: Using default record 0x0161 at dfb0fb80
[17857.481215] eth1: Apply PDA returned 0
[17857.481277] hermes_dld: PROGRAM_DISABLE returned 0, r0 0x0000, r1 0x0000,
r2 0x0000
[17857.481304] hermes_dld: AUX disable returned 0
[17857.491948] eth1: Program end returned 0
[17857.491955] eth1: hermes_present returned 1
[17857.504600] Restarting tasks ... <6>eth1: New link status: Connected
(0001)
[17857.610856] done.
View attachment "config" of type "text/plain" (59398 bytes)
Download attachment "signature.asc " of type "application/pgp-signature" (198 bytes)
Powered by blists - more mailing lists